How it Works
Logik
Loading...
LWC59B12
Instruction Manual
24 pgs2.26 Mb0

Logik LWC59B12 Instruction Manual

59 Bottle Wine Cooler
Instruction Manual LWC59B12
(Wine not included)
Contents
Unpacking .................................................................................................................................... 4
Installation ................................................................................................................................... 5
Product Overview ...................................................................................................................... 10
Operation ................................................................................................................................... 11
Cleaning .....................................................................................................................................14
Maintenance ..............................................................................................................................15
Disposal ...................................................................................................................................... 15
Specication .............................................................................................................................. 16
Safety Warnings ......................................................................................................................... 17
Thank you for purchasing your new Logik Wine Cooler.
We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Adjustable Bottle Shelf x 3
P.N.: 20022027
Bottom Bottle Shelf
P.N.: 20022028
The Main Unit
Rear Spacer x 2
P.N.: 20016077
Bottle Rack
P.N.: 20020091
Instruction Manual
P.N.: LWC59B12-003
If items are missing or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
4
Installation
INSTALLATION
Location
When selecting a position for your unit make sure the floor is flat and firm, and that the room is well ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your unit near a heat source, e.g. a cooker, boiler or radiator. Avoid direct sunlight. If you are placing your unit in an outbuilding such as a garage or annex ensure that the unit is placed above the damp course, otherwise condensation will occur on the cabinet. Never place the unit in a wall recess or into fitted cabinets or furniture.
When installing the unit, ensure that 5 inches of free space is left at both sides, 5 inches at the rear and 100 mm at the top of the unit. This will allow cold air to circulate around the wine cooler and improve the efficiency of the cooling process. The door can open to the right or the left, depending on what better suits the location. Please ensure there is adequate space for the door to fully open.
Allow the unit to stand upright for at least 2 hours before connecting it to the
mains.
Reversing the Door Swing
Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner.
• If you want to have the door swing reversed, we recommend that you contact a qualified technician. You should only try to reverse the door yourself if you believe that you are qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to reinstall the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Tilt the unit slightly towards the rear and prop it securely. Two people are required to tilt the unit during the door reversal process.
5
INSTALLATION
2. Remove the top right hinge cover.
3. Undo the screws. Then remove the hinge bracket.
4. Remove the top left screw cover.
5. Move the core cover from left side to right side. And then lift the door and place it on a padded surface to prevent it from scratching.
6
INSTALLATION
6. Remove the screws and bottom hinge. Then remove the adjustable feet from both side.
7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
Unscrew
Unscrew
8. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
Screw
Screw
7
INSTALLATION
9. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge.
10. Insert the hinge bracket and screw it to the top of the unit.
11. Use a spanner to tighten it if necessary.
12. Put the hinge cover and the screw cover back.
13. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the levelling feet as needed.
Rear Spacer
Screw the rear spacers at the rear of the wine cooler.
screw
8
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use