Logik LCXW32HD1, LCXW37HD1 User Manual

LCXW32HD1
LCXW37HD1

- 1 -

TV Safety Warning

Damage

Never use your TV if it is damaged in any way. Always place your TV on a flat level surface avoiding
anywhere that may be subject to strong vibration.

Weather

It is advisable to unplug the aerial during an electrical storm.

Temperature

Avoid extremes of temperature, either hot or cold, place your TV well away from heat sources such as
radiators or gas/electric fires.

Naked Flames

Naked flames such as candles and night-lights should not be placed on or near your TV.

Ornaments

Vases and other water containers or lamps should not be put on top of your TV set.

Moisture

Do not allow your TV to be exposed to rain, moisture, dust. If any liquid is spilt into your TV it can cause
serious damage. If you spill any liquid into your TV switch it off at the mains immediately. Contact your store.

Ventilation

The TV must be well ventilated. Do not cover your TV or place it inside a small confined space. Make sure
that there is a gap of at least 10cm on both sides and 20 cms at the top.

Interference

Do not place your TV on or near appliances that may cause electromagnetic interference (TV or Hi-Fi
speakers). If you do, it may adversely affect the working of the unit, and cause a distorted picture or sound.

Batteries

Young children easily swallow batteries. Do not allow young children to play with the remote control unit.

Covers

Do not remove any fixed covers as this may expose dangerous voltages.

Standby

The standby button on the remote control doesn't switch off the TV completely and the TV will continue to
draw electricity from the mains supply. Therefore in the interests of safety and to avoid unnecessary energy
consumption, never leave your TV in standby while unattended for long periods of time, eg. overnight, while
on holiday or while out of the house.

Power Cord

Make sure your TV or TV stand is not resting on top of the power cord, as the weight of the TV may damage
the cord and create a safety hazard.

Packaging

If you can store the packaging it will prove useful should you need to transport the TV to protect it while it is in
transit. Try to reuse packaging wherever you can. If you cannot store it, contact your local authority for details
of your nearest recycling facilities.

- 2 -

Contents

TV Safety Warning……………………………………………………………………………………………………………..….

Accessory List…………………………………………………………………………………………………………………..….
Where to place the TV……………………………………………………………………………………………………………..

Overview Description

Panel Description……………………………………………………………………………………………………………..……. 7

Bake Panel Description…………………………………………………………………………………………………………..…8

Remote Control Unit……………………………………………………………………………………………………...……….
Inserting The Batteries……………………………………………………………………………………………………………

Connections

Antenna Connections………………………………………………………………………………………………………………12

YPbPr/YCbCr (Component) Connections ……………………………………………………………………………….……….13

Select viewing source ………………………………………………………………………………………………………..……..13

S-Video and Video(Component) Connections…………………………………………………………………………..………..14

PC Connections ………………………………………………………………………………………………………………..……14

Scart Connections ………………………………………………………………………………………………………..…………15

HDMI/DVI Connections ……………………………………………………………………………………………………..……...16

Basic Operation(TV) …………………………………………………………………………………………………….…….15-20

Menu Operation

Picture Menu……………………………………………………………………………………………………………………..

Sound Menu………………………………………………………………………………………………………………………

Channel Menu……………………………………………………………………………………………………………………

Window Menu…………………………………………………………………………………………………………………….

Setting Menu……………………………………………………………………………………………………………………..

VOG………………………………………………………………………………………………………………………………….32
Teletext…………………………………………………………………………………………………………………………….33-34

Section of DVB-T

Preparation

Connection………………………………………………………………………………………………………………………...

Switching On…………………………………………………………………………………………………………………….…

Tuning In………………………………………………………………………………………………………………………..…

1

4

4

5

6

7-8

9

10

11

11

12

12

13

14

21

22

23-27

28

29-31

35

35

35

- 3 -

Contents

Base operation (DTV)

Change Channel……………………………………………………………………………………………………………………..

Information Banner…………………………………………………………………………………………………………………..

Audio Control…………………………………………………………………………………………………………………………
Digital Teletext…………………………………………………………………………………………………………………………

Remote Control……………………………………………………………………………………………………………………….

Channel List Management……………………………………………………………………… ……………………………...39-40
Favourite List Management

………………………………………………………………………………………………………...41

Using EPG(Electronic Programme Guide)

Now/Next EPG…………………………………………………………………………………………………………………………42

List Schedule EPG…………………………………………………………………………………………………………………….42

Timeline Schedule EPG……………………………………………………………………………………………………………….43

Common Interface…………………………………………………………………………………………………………………...44
Timers………………………………………………………………………………………………………………………………….45

Setting

Configuration……………………………………………………………………………………………………………………….46-48

Language……………………………………………………………………………………………………………………………….49

Installation…………………………………………………………………………………………………………………………..49-50

Trouble Shooting

…………………………………………………………………………………………………………………….

Screen Burn…………………………………………………………………………………………………………………………
Maintenance…………………………………………………………………………………………………………………………
Specifications

………………………………………………………………………………………………………………………..

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.

With over 50,000 products in stock we can deliver direct to your door the very next day.

Visit

www.partmaster.co.uk

or call

0870 6001 338

(UK customers only)

Calls charged at National Rate.

51

52

53

54

36

36

37

37

38

- 4 -

Accessory List

Where to place the TV

1.First select the location where to place the TV. 2.Setting the TV
Selecting the location of the TV Handling the Display

Caution:

• Select a place with no direct sunlight and good ventilation.

•

Do not remove the stand from the display unless using a proper bracket to mount it.

• Keep enough space above and behind the display.

• Make sure to move the TV with two or more people.

•

When you move the display, hold the part of the display, not the speaker.

4 inches
(10 cm)
or more

U

s

e

r

'

s

m

a

n

u

a

l

Power Cord (×1)
*062227/8

Operatio

n manual

Remote control unit (×1)
*VURRC301V5

A

ntenna cable (×1)

(Aerial)

- 5 -

Panel Description

① Bottom speaker

② Bottom speaker

③ Remote control sensor

④ Standby indicator

⑤ SOURCE

Press to display the menu of the available viewing source.

⑥ MENU

Press to display the OSD menu. The button also acts as select button ‘’OK’’ in source

menu.

⑦ CH+/-

Press to change the channel. The two buttons also act as direction buttons

in menu

display.

Under the DTV station, only the CH+/- button on the remote control can be worked

for channels changing; the CH+/- button on the front board can't work.

⑧ VOL+/-

Press to adjust volume. The two buttons also act as direction buttons

in menu

display

.

⑨ STANDBY

Turn on/standby the TV.

- 6 -

Back Panel Description

Power Switch

Headphone Output

EXT2

EXT1

PC IN

HDMI/DVI IN

Rear interface:

Side

interf

ace

:

DVB Update

POWER

A

udio In

Component In

PC Audio In

Optical

TV Update

Digital Out

Digital Antenna In

PCMCIA PlugRF

S-Video input

A

udio input

Video in put

- 7 -

Remote control unit

1 STANDBY

Turn on/standby the TV.

2 SOURCE

Select an input source. (TV, AV, PC,EXT1, EXT2, DTV, HDMI,
Component)

3 LAST SOURCE

4 DTV/TV

Switch to Digital-TV mode / TV mode .

5 MENU

Display the menu screen.

6 Colour (RED/GREEN/YELLOW/BLUE)

TELETEXT mode: Select a page.

DTV input mode: The coloured buttons are used to select

correspondingly to the coloured items in the menu screen.

7 DTV MENU

DTV input mode: Display the digital TV menu screen.

8 TXT/MIX

Select the TELETEXT mode.

9 GUIDE

DTV input mode: To Display EPG

(Electronic Programme Guide) screen.

10 DISPLAY

Display the programme information.

11 SUBTITLE

To turn the subtitles on and off.

12 VOG

VOG means video on graphic.

13 LAST

Press to return to the previous channel.

14 VOL-/VOL+

Set the volume.

15 ASPECT

Picture proportion.

16 Teletext Sub page

17 FREEZE

TV/External input mode: Change the still image mode.

- 8 -

Remote control unit

18 Teletext Sub page up

19 Workless button

20 VIDEO OFF

Nor-Picture

21 MUTE

Mute the sound.

22 ▲▼◄►

(Direction)

Select a desired item on the setting screen.

23 OK

Execute a command.

24 EXIT

Turn off the On Screen Display.

25 LIST

Browse the channel list.

26 FAV

DTV input mode: Browse the favourite list.

27 0-9

TV/DTV/External input mode: Set the channel.

TELETEXT mode: Set the page.

28 DUAL

Set the dual mode.

29 CH+/ CH -

Select the channel.

30 TELETEXT HOLD

TELETEXT mode: Freeze a multi-page on screen
while other pages are automatically updated.

31 Reveal hidden for TELETEXT
TELETEXT mode: Display hidden characters.

32 TELETEXT Sub page down

33 PAGE

34 SIZE

TELETEXT mode: Teletext Characters zoom in.

- 9 -

Inserting the batteries

Before using the System for the first time, insert two “AA” size batteries. When the batteries become depleted
and the remote control fails to operate, replace the batteries with new “AA” size batteries.

1 Open the battery cover. 2 Insert two supplied “AA” size batteries. 3 Close the battery cover.

• Place batteries with their terminals
corresponding to the (+) and (-)
indications in the battery compartment.

Caution

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions
below.

• Place the batteries with their terminals corresponding to the (+) and (-) indications.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or
cause chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash.
If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

Using the remote control unit
1 Make sure there are no objects between the remote control and its sensor.
2 Don't place the remote control near a heater or in a damp place. A strong impact on remote control may

damage it.

3 Signal from the remote control may be disturbed by sun light or other strong light. In this case, darken the

room.

4 When using the remote control, please aim at the sensor within 7 meters and don't deflect angle more than

30 degrees.

- 10 -

Antenna(Aerial) Connections

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.

For Example: For viewing both analog and digital broadcasts

For Example: For viewing analog broadcasts

*If you have a 75 ohm round cable, insert the bronze wire and then tighten the connection nut.
*When using 75 ohm round cable, please do not bend the bronze wire, it may make the video quality poor.

7

5 o

hm Round

Cab

l

e

For viewing only digital broadcasts, you do not need to connect the
antenna cable (supplied).

7

5 o

hm Round

Cable

- 11 -

YPbPr/YCbCr (Component) Connections

Note:

Please refer to the illustration above to connect TV with DVD player or other component signal sources.
Connect YPbPr/YCbCr Cable and Audio Cable to corresponding jacks of DVD player or other component
signal sources.
Please choose "Component" in the Source menu when you connect component signal source.

Select viewing source:
Press the "SOURCE" button to display the sources list.

Please use numerical buttons directly to select desired signal, or use the direction to select desired signal and
then press the "OK" button to confirm.

Audio

YP

bPr/YCbC

r

- 12 -

S-Video and Video (Composite) Connections

Note：

1.Please refer to the illustration above and in the last page to connect TV with S-Video or other composite
signal sources. Connect S-Video/composite video cable and audio cable to corresponding jacks of DVD

player or other composite signal sources. Please choose "AV" in the Source menu when you connect DVD
player.

2.When S-Video and composite video are connected at the same time, S-Video would be employed to

approach the best video effect. If composite video is necessary, please disconnect S-Video.

How to select viewing source (''AV'')

Please refer to page 11.

PC Connection

Note:

1.Please refer to the illustration above to connect TV with PC or DVD player. Connect VGA Cable and
Audio Cable to the corresponding jacks of PC and select the signal source as "PC".

2.If you connect VGA Cable to disc player or STB, please select "PC" and set the output mode as "PC".
Please choose PC in the Source menu when you connect disc player or STB with VGA source out.

How to select viewing source (''PC'')
Please refer to page 11.

S-Video or composite signal output

A

V Cable

S

-Vi

deo Cable

VGA Cable

Audio Cable

- 13 -

Scart Connections

Scart connections (Example)

Note:

Please refer to the above illustration to connect TV with DVD player.
Connect Scart Cable to the corresponding jacks of DVD player or other devices. Please choose "EXT1",
EXT2 in the Source menu when you connect DVD player or other sources with Scart connection.

How to select viewing source (''EXT1/E XT2'')

Please refer to page 11.

Input/Output Specification:

Input Output

Connector

CVBS S-Video RGB CVBS

EXT1 √ √ TV
EXT2 √ √ TV/AV(CVBS)/EXT1(CVBS)/EXT2(CVBS)

Note:

1.The signal type inputted to EXT1 will be detected automatically.

2.Select the desired signal type on "Source Setting” in the "Setting" menu---only for EXT2.
The setting will be stored and can be viewed on "SOURCE" menu.(See page 30)

Scart Auto Playback Function:

1. Support the Auto Playback between TV and EXT sources.

2. When signal is lost , the searching preference: EXT1,EXT2,TV.

For example:

1. If you connect EXT 2 when you are watching program signal from EXT 1, the TV will display signal

from EXT 2 automatically.

2.If you disconnect EXT 1 when you are watching program from it (or turn off the signal source from

EXT 1, and there are no signals from EXT 2, the TV will play TV source automatically).

Scart Cable

- 14 -

HDMI/DVI Connections

Picture A

Picture B

Connect TV with corresponding jacks on DVD or STB, and switch the source to HDMI in Source menu.
(Picture A/B)

1.If connecting with an HDMI cable, it is not necessary to connect an audio cable.

2.If connecting to equipment that has only a DVI output terminal, DVI -HDMI adapter cable and an audio

cable are necessary. Audio cable is necessary (Picture B).

When connecting with HDMI, you can get better audio effect by connecting digital audio signal device to other
playing devices like an amplifier through Optical connector. (Picture C)。

How to select viewing source (''HDMI'')

Please refer to page 11.

HDMI

Cable

HDMI/DVI

A

udio Cable

DIGITAL OUT (HDMI)

Optical Cable

(PictureC)

- 15 -

Basic Operation

Power on/Power off

1.Plug the power cable into the jack; make sure the output voltage and frequency of the power is consistent

with this machine.

2.Power on the switch on the side cover, the red light on the front board will be lighted, then the TV enter

standby mode. Press " STANDBY " button in remote control or "STANDBY" touch key on the front board,
the indicator change into green. The TV enter Play mode.

3.Press " STANDBY " button on the remote control to power off the TV, and the TV will enter standby mode,

the indicator change from green to red. Close the main power switch and it will stop working.

Note:

Please draw out the plug when you won't use it for long time.

Initial Auto Installation

When the TV powers on for the first time after purchase, the Initial Auto Installation is involved.
You can automatically set teletext language, sound system and channels in successive operations.

Note: The initial auto installation functions only once.

1.This menu will display on the TV screen automatically after the

TV being turned on for the first time.
Press "OK" button to choose "Next" to start.

2.Setting the teletext language

Press "▲/▼/◄/►" button to select your teletext language on the

screen.
Press "OK "to enter the setting.
Then select the "Next" and press "OK" button to enter
next the setting,

3. Set sound system

Press "▲/▼/◄/►" buttons to choose the optimum
sound system among locally receivable broadcasting systems
"DK/BG/I/L’/L". Then press "OK" to confirm.
Press "►" to enter "Next" and then press "OK" to enter the setting,
or press "◄/►" to choose "Cancel" or "Back".

- 16 -

Basic Operation

4.Channel Preset

Press "OK" to start the auto search, or press " ◄/► " to choose
"Back" or "No".

You do not need to do anything during the auto search.

5. Auto Search

Press "EXIT" to stop the auto search, but you are recommended
not to stop it during the search process since the initial auto
installation functions only once.

6. After the auto search finished, the finishing sign menu will display on the screen. Then the TV will stop at
channel one.

7. Watching TV

The set up menu disappears and you can watch the program on channel 1. To arrange these channels into
your chosen order please see "Exchange Channel" on page 24.