-Before Attempting to connect, operate or adjust this product, please save and read the User Guide completely.
-The style, parts, and accessories of the product shown in this guide may be different due to various models.
-The design and specications are subject to change without notice.
Contents and
Safety information
Getting startedConnectionsRemote controlInitial settingBasic operationOSD operationTroubleshooting &
Specications
How to use your LCD TV
82-233-00042
LCXW19LN1
Table of Contents
Important Safety Instructions ............................................................................. 1
Precautions ..........................................................................................................4
Characteristic Features ....................................................................................... 5
Disc Information................................................................................................... 6
Front Panel ...........................................................................................................7
Rear Panel ............................................................................................................8
Remote Control .................................................................................................... 9
System Connections ......................................................................................... 12
Connecting to Power Supply .................................................................................................. 12
Connecting to External AV Signal Source ............................................................................. 12
Connecting to External AV Signal Source (YPbPr)................................................................. 13
Connecting to External AV Signal Source (SCART) ............................................................. 13
Connecting to External AV Input Device (AV Output)……………………………………………..14
Connecting to Earphone……………………………………………………………………………..14
Connecting to PC ................................................................................................................... 15
Connecting to TV Antenna ..................................................................................................... 16
TV Function ........................................................................................................ 17
Preparations........................................................................................................................... 17
Image Setting ......................................................................................................................... 17
Audio Setting.......................................................................................................................... 20
Setup Setting.......................................................................................................................... 21
NICAM Function ................................................................................................. 24
DVD Playback Operation................................................................................... 25
USB and SD/MS/MMC Card Function............................................................... 29
DVD System Setup............................................................................................. 30
Troubleshooting................................................................................................. 38
Specifications..................................................................................................... 39
- 1 -
Important Safety Instructions
Important Warning
A DVD player is a Class 1 laser product, however this player uses a visible laser beam which could
cause hazardous radiation exposure.Be sure to operate the player correctly as instructed. The
following caution label is located on the rear panel of the player.
When this player is plugged into the wall outlet, do not place your eyes close to the opening
of the disc tray and other openings to look into the inside of this player.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
To reduce the risk of fire or electric shock and annoying interference, use the recommended
accessories only.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
The images in this manual are only for reference and they may be different
from the actual ones.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the use
r
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
- 2 -
Important Safety Instructions
Damage
Never use your TV if it is damaged in any way. Always place your TV on a flat level surface
avoiding anywhere which may be subject to strong vibration.
Weather
It is advisable to unplug the aerial during an electrical storm.
Temperature
Avoid extremes of temperature, either hot or cold, place your TV well away from heat sources
such as radiators or gas/electric fires.
Naked Flames
Naked flames such as candles and night lights should not be placed on or near your TV.
Ornaments
Vases and other water containers or lamps should not be put on top of your TV set.
Moisture
Do not allow your TV to be exposed to rain, moisture, dust. If any liquid is spilt into your TV it
can cause serious dam-age. If you spill any liquid into your TV switch it off at the mains
immediately. Contact your store.
Ventilation
The TV must be well ventilated. Do not cover your TV or place it inside a small confined space.
Make sure that there is a gap of at least 10cm on both sides and 20 cm at the top.
Interference
Do not place your TV on or near appliances which may cause electromagnetic interference
(TV or Hi-Fi speakers). If you do, it may adversely affect the working of the unit, and cause a
distorted picture or sound.
Screen Burn
A characteristic of Plasma and LCD TV Panels is that displaying the same image for a long
time may cause a permanent after-image to remain on the screen. This is called screen burn.
Most pictures shown on your TV will be constantly moving and fill the screen.
Examples of images that you need to watch out for are as follows (this is not an all-inclusive list):
Black Bars: If black bars appear at the left/right or top/bottom of the screen it is recommended to
change the format so that the picture fills the entire screen.
TV Channel Logos: e.g. Shopping channel logos and pricing displays - especially if they are
bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the
screen.
PIP and Multipip: Do not view for long periods of time using the PIP or Multipip functions.Time
DisplaysTeletext: Do not view a stationary page for long periods of time.
TV/DVD Menus: e.g. Listings of DVD disk content.
Pause Mode: Do not leave the screen in pause mode for long periods of time, e.g. When
watching DVDs or videos.
Note: To prevent screen burn if viewing any of the above for long periods of time, reduce contrast
and bright-ness when viewing. Once burn-in occurs it will never disappear completely.
- 3 -
Important Safety Instructions
Batteries
Batteries are easily swallowed by young children. Do not allow young children to play with the
remote control unit.
Covers
Do not remove any fixed covers as this may expose dangerous voltages.
Standby
The standby button on the remote control doesn’t switch off the TV completely and the TV will
continue to draw electricity from the mains supply. Therefore in the interests of safety and to
avoid unnecessary energy consumption, never leave your TV in standby while unattended for
long periods of time, e.g. overnight, while on holiday or while out of the house.
Power Cord
Make sure your TV or TV stand is not resting on top of the power cord, as the weight of the TV
may damage the cord and create a safety hazard. Make sure that the mains plug is easily
accessible.
Packaging
If you can store the packaging it will prove useful should you need to transport the TV to
protect it while it is in transit. Try to reuse packaging wherever you can. If you cannot store it,
contact your local authority for details of your near-est recycling facilities.
- 4 -
Precautions
Please read these precautions before operating the unit
Power cord protection
To avoid any malfunctions of the unit, and to protect against electric shock, fire or personal
injury, please observe the following.
1. Hold the plug firmly when connecting or disconnecting the AC power cord.
2. Keep the AC power cord away from heating appliances.
3. Never put any heavy object on the AC power cord.
4. Do not attempt to repair or reconstruct the AC power cord in any way.
Placement
Avoid placing the unit in areas of:
1. Direct sunlight or heating radiators, or closed automobiles
2. High temperature (over 35
℃) or high humidity (over 90%)
3. Much dust as the internal parts may be seriously damaged.
Non-use periods
When the unit is not being used, turn it off. When left unused for a long period of time, the unit
should be unplugged from the household AC outlet.
No fingers or other objects inside
1. Touching internal parts of the unit is dangerous, and may cause serious damage to the unit. Do
not attempt to disassemble the unit.
2. Do not put any foreign object on the disc tray.
Keep away from water/magnet
1. Keep the unit away from vases, tubs, sinks, etc. If liquids are spilled into the unit, serious
damage could occur.
2. Never bring a magnet or magnetized object near the unit.
Stacking
Place the unit in a horizontal position, and do not place anything heavy on it.
Condensation
Moisture may form on the lens in the following conditions:
1. Immediately after a heater has been turned on
2. In a steamy or very humid room
3. When the unit is suddenly moved from a cold environment to a warm one If moisture forms
inside the unit, it may not operate properly. In this case, turn on the power and wait about one
hour for the moisture to evaporate.
Proper positioning of this LCD TV
1. Locate the LCD TV in the room where light does not strike the screen directly.
2. Avoid the LCD TV exposes to sunlight and other sources of heat.
3. Make sure enough space for ventilation between TV and wall.
4. Do not cover the ventilator when using the LCD TV.
5. Total darkness or over brightness on the picture screen can cause eyestrain, soft and indirect
lighting environment is recommend for watching.
6. Do not use solutions to clear LCD panel such as petroleum, the panel can be cleaned with
a damp cloth.
7. The LCD TV adapter is operated on AC 110-240V,50/60Hz.
- 5 -
Characteristic Features
This product incorporates DVD player, LCD display and TV receiver in one system.
Multiple Mode
TV mode
SCART mode
CVBS mode
S-VIDEO mode
COMPONENT mode
VGA mode
DVD mode
High Quality Property
High Resolution
Adopt an MPEG2 decoding format to achieve
horizontal resolution more than 500 lines.
LCD (Liquid Crystal Display)
Designed with 19" color TFT liquid crystal
display clearly shows the data.
Stereo amplifier
Built-in two speakers provide high quality
sound.
AV and VGA Input
Can be connected to external audio and video
signal source and PC.
Special Function
Support sleep time setting function and favorite
channel setting function, etc.
Multi-audio and Multi-video modes
Support multi-audio and multi-video modes,
provide more selecting.
USB and CARD PORTS
Designed with USB and SD/MS/MMC card port,
can be connected to USB device or
SD/MS/MMC Card.
Auto TV Searching Function
Can be connected to the TV antenna, support
Auto and manual TV programs searching
function.
NICAM Function
Supports the NICAM function. According to the
broadcasting programs, you can choose the
corresponding soundtrack.
Advanced Playing Features
Compatibility
DVD, CD and JPEG discs compatible.
All Playback Functions
Fast forward and backward, slow playback and
repeat playback.
Special playback.
Support multi-angle, multi-language and
multi-subtitle playback.
NOTE: It is normal for a TFT screen to
experience some light or dark spots appearing
on the LCD screen.
- 6 -
Disc Information
Discs Formats Supported By This Player
DISC LOGO CONTENTS SIZE MAXIMUM TIME
133min(SS-SL)
242min(SS-DL)
266min(DS-SL)
DVD
Audio+Video
(active picture)
12cm
484min(DS-DL)
CD Audio 12cm 74min
JPEG Still high resolution 12cm
The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of
one or more chapters and each of them is numbered for easy searching. But some discs may not
have a recording chapter.
Track
A segment of picture or music on a CD. Each track is numbered for searching.
- 7 -
Front Panel
1. 19" color TFT screen
19" color TFT screen clearly show the
data.
2. SOURCE button
Press to select mode among TV, SCART,
CVBS, S-VIDEO, COMPONENT, VGA
and DVD.
In setup menu, the same function as
ENTER button.
3. MENU button
Press to enter or exit the setup menu.
4. CH
▲/▼ button
Press to select channels in the TV mode.
In setup menu, the same function as
▲/
▼ direction buttons.
5. VOL
▲/▼ button
Press to increase or decrease the volume.
In setup menu, the same function as
◄/►direction buttons.
6. PLAY button
Press to play the disc in DVD mode.
7. ■ STOP button
Press to stop disc playback in DVD mode.
8.
Eject button
Press to eject the disc out the unit.
9. Power button
Press to enter or exit the standby mode.
10. SD/MS/MMC Card Port
Insert the SD, MS or MMC card into the
port.
11. Disc Tray Slot
Use to load and unload disc.
12. Earphone Jack
When connected to earphone, the internal
speakers will automatically turn off.
13. USB Connecting Port
Connecting to the USB device.
14. Remote Sensor
Receiving signals from the remote control.
15. Power Indicator
In normal playback status, it is blue; in
standby mode, it turns red.
16. Speakers
- 8 -
Rear Panel
Jack Panel
Open the back cover on the right side of the unit’s rear panel, and you will see all jacks, as shown
below:
1. Y/Pb/Pr Input Jack
Connect to the Y/Pb/Pr input in
COMPONENT Video-in mode.
2. Y/Pb/Pr L/R Audio Input Jack
Connect to the L/R audio input in
COMPONENT Audio-in mode.
3. Composite Audio/Video Output Jack
In the CVBS mode, connected to output
the Audio/Video signals.
4. S-VIDEO and CVBS Audio/Video Input
Jack
Connect to the S-VIDEO input in S-VIDEO
mode or CVBS input in the CVBS mode.
The L/R audio input jacks can be used in
the both S-VIDEO and CVBS modes.
5. SCART Input Jack
Connect to European type SCART output
connector on other audio/video devices.
6. TV Signal Input Jack
Connect for the external TV signal.
7. DC 12V Input Jack
Connect the power adaptor or the car
adaptor.
8. VGA Input Jack
Connect the VGA output jack on a
personal computer.
9. PC AUDIO Input Jack
Connect to the PC audio output jack.
- 9 -
Remote Control
Remote Control Drawing
1. Power On/ Off
Press to power on/off mode.
2. TV button
Press to shift to TV mode.
3. DVD button
Press to shift to DVD mode.
4. P.M. button
Press to shift the screen picture modes to
different brightness settings: User,
Standard, Soft, Bright and Shine.
5. S.M. button
Press to shift the sound modes to different
sound settings: User, Standard, Music,
Movie and Speech.
6. 0~9 Number buttons
Press to select numbers such as TV
channel.
7. STEREO/Audio button
Press to shift sound track when in TV
mode (Please see P23 for details).
Press to select audio language or audio
track when in DVD mode.
8. VOL+/- button
Press to adjust volume level.
9. MUTE button
Press to turn on or off the sound.
10. EXIT button
Press to exit from the setup menu.
11. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼ button
to select a desired item and press the ◄►
button to adjust or set.
12. ENTER button
Press to confirm your selection.
13. SOURCE button
Press to select different input modes
among TV, SCART, CVBS, S-VIDEO,
COMPONENT, VGA and DVD.
14. PLAY button
Press to play a disc when in the DVD
mode.
15. PAUSE button
When in DVD mode, press to pause
playback. Press the PLAY button to
resume normal playback.
16. / button
Press to search backward or forward
when in DVD mode.
Under teletext mode, it’s the teletext color
button.
17. TITLE button
When a DVD is playing, press the TITLE
button to go to the title menu and display
disc contents.
Under TV, CVBS, S-Video or
SCART-CVBS mode, press to
display/close the teletext.
- 10 -
Remote Control
18. MENU button (under DVD mode)
Press to enter disc main menu when in
DVD mode.
Under teletext mode, press to disable
teletext display and press again to
resume.
19. SETUP button
Press to open DVD setup menu when in
DVD mode.
Under teletext mode, press to display
index page (always page 100).
20. SLOW button
Press to activate slow playback function
when in DVD mode.
Under teletext mode, press once to
display the concealed information, such
as solution of riddles or puzzles; press
again to resume the riddles information
from the display.
21. D-SUB button
Press to shift to VGA mode.
22. SCART button
Press to shift to SCART mode.
23. DISPLAY button
Press to display the reference information
of the current program.
24. SET FAV button
Press to set the current channel as the
favorite channel.
25. FAV button
Press to shift to the favorite channel.
26. /+10 buttons
When in TV mode, press to return to the
channel previously viewed. When in DVD
mode, press to select numbers greater
than 10.
27. SCAN/SUBTITLE button
When in TV mode, press to scan the
programs and press again to stop
scanning. When in DVD mode, press to
select alternate subtitle languages during
playback of a multiple language DVD disc.
28. CH +/- button
When in TV mode, press to select
channel.
29. ASPECT button
Press to shift the aspect ratio of the
screen between Fill Screen and Aspect
Normal.
30. MENU button
Press to enter or exit the setup menu.
31. SLEEP button
This feature allows you to set up sleep
time when in TV mode. Press the button
repeatedly to select the desired sleep time
or “Off” to close this function.
32. Eject button
Press to eject the disc from the unit.
33. ■ STOP button
Press to stop disc playback when in DVD
mode.
34. / button
Press to skip to the previous or next
chapter/track when in DVD mode.
Under teletext mode, it’s the teletext color
button.
35. REPEAT button
Press to repeat a chapter, track, title or all
program content when in DVD mode.
Under teletext mode, press to freeze the
current page and press again to resume.
36. ANGLE button
Press to select various camera angles (if
the DVD supports multiple camera angles)
in DVD mode.
Under teletext mode, press the button first
time to double the size of teletext letters in
the upper half of the screen, press it the
second time to double the size of teletext
letters in the lower half of the screen and
press it the third time to resume normal
status.
37. CARD button
Press to shift among disc playback, USB
playback and SD/MS/MMC playback.
Under teletext mode, press to select four
groups 3-digit numbers that displayed in
different colours at the bottom of the
screen. Press the colour buttons on the
remote control to select, then use the
number buttons to input the corresponding
number to display the page.
Repeat the above procedures for each
page to be stored, using a different colour
button accordingly each time.
38. GOTO button
Press to select the desired disc starting
time, title or chapter when in DVD mode.
Under TV mode, press to display the
realclock and press the EXIT button to
exit.
- 11 -
Remote Control
Insert Batteries to Remote
Control
1. Softly push the battery cover to open the
battery compartment.
2. Insert two batteries that are 1.5V, size AAA,
and alkaline type. Please make sure the polarity
matches the marks inside the compartment
Avoid mixing new and used batteries in the
remote control.
3. Softly snap the battery cover back into
position
.
Under normal use the battery will last for
six months.
Take out battery when the remote will not
be in use for a long time.
Using of Remote Control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
• The operating distance may vary
depending on the brightness of the
surrounding.
Notes:
• Do not point bright lights directly at the
remote control sensor.
• Do not place objects between the remote
control unit and the remote control sensor.
• Do not use this remote control unit while
simultaneously operating the remote
control unit of other equipment.
- 12 -
System Connections
• Before connections, disassemble the jack cover first.
• Do not connect the power cord until all other connections have been made.
• Ensure that you observe the colour cord when connecting audio and video cables.
Connecting to Power Supply
Obtain power supply by connecting to the provided appropriate power adapter. With one end of the
power adapter connects to the DC12V IN jack (which located at the side panel of the unit), and the
other end to the AC 100-240 wall outlet.
Connecting to External AV Signal Source
Use the Audio /Video/S-Video cables to connect the AV/S-Video input jacks, which located at the
rear panel of the unit, to the external AV signal sources. (E.g., Game/DVD Player
Recorder/Camcoder/VCR)
After connecting the power supply and the external AV signal sources, turn on the power of the unit
and the external AV signal source. Press the SOURCE button to shift to CVBS or S-VIDEO mode.
Note: The L/R audio input jacks can be used in the both CVBS and S-VIDEO modes.
- 13 -
System Connections
Connecting to External AV Signal Source（YPbPr）
Use the audio and video cables to connect the Y/Pb/Pr input jacks on the rear panel of the unit to
the external AV signal source. (E.g., Game/DVD Player Recorder/Camcoder/VCR)
After connecting the AV cables, turn on the power of the unit and the external AV signal source.
Press the SOURCE button to shift to COMPONENT mode.
Connecting to External AV Signal Source（SCART）
Use the SCART cable to connect the SCART input jacks on the rear panel of the unit to the external
AV signal source. (E.g., Game/DVD Player Recorder/Camcoder/VCR)
After connecting the SCART cable, turn on the power of the unit and external AV signal source.
Press the SOURCE button to shift to SCART mode.
- 14 -
System Connections
Connecting to External AV Input Device（AV Output）
Use another set of audio and video cable to connect the AV output jacks on the side panel of the
unit to the external AV input device. (E.g., Game/DVD Player Recorder/Camcoder/VCR)
After connecting the AV cable, turn on the power of the unit and external AV input device. Press the
SOURCE button to shift to the corresponding mode.
Note: The unit can only output TV, CVBS, S-VIDEO and SCART-CVBS signals.
Connecting to Earphone
This unit can be connected to an earphone for listening music privately. See the below figure for
details:
After connecting to the earphone jack, the internal speakers output will turn off automatically.
Note: Excessively loud volume could damage your hearing. So turn down the volume before you
connect the headphone, and then raise the volume to your comfortable level.
- 15 -
System Connections
Connecting to PC
The unit can be connected to your PC (personal computer) via the VGA cable (not supplied). Follow
the steps and the figure below to connect.
1. Connect one end of the VGA cable to the VGA input jack on the side panel and the other end
to your PC.
2. Connect one end of the audio cables to the PC audio input jack on the side panel and the other
end to your PC’s audio output jack.
3. Set the PC’s resolution at 1024×768@60Hz.
After connecting to the PC, turn on the unit and the PC. Press the SOURCE button to shift to VGA
mode.
Note: We suggest using the VGA cable with a magnetic ring on each end to prevent
radio frequency and electro-magnetic interference. (EMI/RFI)
- 16 -
System Connections
Connecting to TV Antenna
This unit can be connected to the TV signal input source via the TV jack on the rear panel.
After connecting to the TV antenna, turn on the power of the unit. Press the SOURCE button to shift
to TV mode.
To do the program searching, you can follow the steps below to set your TV.
1. For 0~9 channel:
Press the number buttons to select the channel X
, wait several seconds and it will go to the
selected channel.
Or press the number buttons to select channel X, and press the ENTER button to go to the
selected channel immediately.
Or press the number buttons to select channel 0X
, and it will go to the selected channel
immediately.
2. For 10~99 channel:
Press the number buttons to select channel XX
, and it will go to the selected channel
immediately.
* X is the channel number.
- 17 -
TV Function
NOTE: In other mode, you can refer to the following instructions in TV mode to go on with
some settings.
Preparations
1. press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.)
2. press the SOURCE button to shift to TV mode. You can go on with the following operations:
Image Setting
Note: This item is only available when there is signal input.
Picture Setup
1. Press the ▲▼ button to select Picture and
press the ENTER button to enter.
2. Press the ▲▼ button to select the desired
setting and press the ENTER button to
confirm your selection.
3. Press the MENU button to return to the
previous menu
.
Press the MENU button once to enter the setup
menu. Press the ▲▼ button to select Image and
press the ENTER button to enter the menu
shown on the right.
In the Image setup menu, press the ▲▼ button
to select the desired setting. Press the MENU
button to return to the previous menu.
Scheme Setup
1. Press the ▲▼ button to select Scheme and
press the ENTER button to enter.
2. Press the ▲▼ button to select the desired
item and press the ENTER button to confirm
your selection.
3. Press the MENU button to return to the
previous menu.
- 18 -
TV Function
Contrast Setup (To adjust the picture contrast)
1. Press the ▲▼ button to select Contrast and press the ◄► button to adjust the parameter.
2. Press the MENU button to return to the previous menu.
Hue Setup (To adjust the picture colour tone)
1. Press the ▲▼ button to select Hue and press the ◄► button to adjust the parameter.
2. Press the MENU button to return to the previous menu.
Note: This item is only available under NTSC TV signal mode.
Saturation Setup (To adjust the picture’s colour saturation)
1. Press the ▲▼ button to select Saturation and press the ◄► button to adjust the parameter.
2. Press the MENU button to return to the previous menu.
Sharpness Setup (To adjust the sharpness of the picture)
1. Press the ▲▼ button to select Sharpness and press the ◄► button to adjust the parameter.
2. Press the MENU button to return to the previous
menu.
Advanced Setup
Press the▲▼ button to select Advanced and press
the ENTER button to enter.
In the menu, press the ▲▼◄► direction button to
move the image. Press the MENU button to return to
the previous menu.
Note: This item is only available in DVD, VGA and COMPONENT modes.
Brightness Setup
1. Press the ▲▼ button to
select Brightness and
press the ◄► button to
adjust the parameter.
2. Press the MENU button to
return to the previous
menu.
- 19 -
TV Function
When the VGA signal is connected to the unit, the Advanced setup menu is shown below:
Auto Adjust:
If the monitor is not clear, you should carry out “Auto
Adjust”.
1. Press the “▲▼” button to select “Auto Adjust” and press the “ENTER” button to enter its
menu.
2. Press the “▲▼” button to select “Yes ” to activate this function or “No” to cancel.
3. Press the “MENU” button to return to the previous menu.
NOTE: The effect of the monitor can also be adjusted manually. Please follow the settings
below for your preference.
Image Pos:( To position the image on the screen)
1. Press the “▲▼” button to select “Image Pos” and press the “ENTER” button to enter its menu.
2. Within the menu, press the “▲▼◄►” button to move the image.
3. Press the “MENU” button to return to the previous menu.
Phase:( To manually match your graphic card and screen settings for best viewing)
1. Press the “▲▼” button to select “Phase”.
2. Press the “◄►” button to adjust the parameter.
3. Press the “MENU” button to return to the previous menu.
Clock: (To set the TV’s clock timer)
1. Press the “▲▼” button to select “Clock” and press the “ENTER” button to enter its menu.
2. Press the “◄►” button to adjust the value.
3. Press the “MENU” button to return to the previous menu.
Auto Colour:( To automatically adjust the screen background colour)
1. Press the “▲▼” button to select “Auto Colour” and press the “ENTER” button to activate this
setting.
2. Press the “MENU” button to return to the previous menu.
SRGB: (To adjust the colour and the graphic, so that thay will display as close as the actual
image)
1. Press the “▲▼” button to select “sRGB” and press the “ENTER” button to enter its menu.
2. Press the “▲▼” button to select “On” to activate this function or “Off” to cancel.
3.
Press the “MENU” button to return to the previous menu.
Press the “▲▼” button to select the desired item and
press the “ENTER” button to enter its setup menu.
Press the “MENU” button to return to the previous
menu.
- 20 -
TV Function
Audio Setting
Volume Setup (To adjust the volume level)
1. Press the ▲▼ button to select Vo lume and press the ◄► button to adjust the level.
2. Press the MENU button to return to the previous menu.
Bass Setup (To fine tune the lower pitch sounds)
1. Press the ▲▼button to select Bass and press the ◄► button to adjust the level.
2. Press the MENU button to return to the previous menu.
Treble Setup (To fine tune the higher pitch sounds)
1. Press the ▲▼button to select Treble and press the ◄► button to adjust the level.
2. Press the MENU button to return to the previous menu.
Balance Setup (To adjust the sound balance of the speakers)
1. Press the ▲▼ button to select Balance and press the ◄► button to adjust the level.
2. Press the MENU button to return to the previous menu.
Auto Volume Setup (To automatically adjust the volume)
1. Press the ▲▼ button to select Auto Volume and press the ENTER button to access the menu.
2. Press the ▲▼ button to select “On” or “Off” and press the ENTER button to confirm.
3. Press the MENU button to return to the previous
menu.
Sound Mode provides four different customized
settings (except “User” item) which allows you to select your preferred equalizer setting quickly and
directly. If you adjust one of the following items: BASS/TREBLE/BALANCE, the sound mode will
change to “User” item automatically.
Press the MENU button once to enter the setup
menu. Press the ▲▼ button to select Audio and
press the ENTER button to enter the menu shown on
the right.
In the Audio setup menu, press the ▲▼ button to
select the desired item. Press the MENU button to
return to the previous menu.
Sound Mode Setup
1. Press the ▲▼ button to select Sound Mode
and press the ENTER button to enter.
2. Press the ▲▼ button to select the desired item
and then press the ENTER button to confirm
your selection.
3.
Press the MENU button to return to the
previous menu.
- 21 -
TV Function
Setup Setting
Press the MENU button once to enter the setup menu.
Press the ▲▼ button to select Setup and press the
ENTER button to enter the menu shown on the right.
In the Setup menu, press the▲▼ button to select the
desired item. Press the MENU button to return to the
previous menu.
Tuner/Channel (To tune/find the TV channels)
1. Press the ▲▼ button to select the
Tuner/Channel and press the ENTER button
to enter the menu shown on the right.
2. Press the ▲▼ button to select the desired
item: country, Auto Scan, Prog Organizer or
Manual Install.
3. Press the MENU button to return to the
previous menu.
Country
1. Press the ▲▼ button to select the Country
which this LCD TV is connected and press the
ENTER button to enter the menu shown on the
right.
2. Press the ▲▼ button to select the desired
item.
3. Press the MENU button to return to the
previous menu.
Auto Scan
Before watching TV programs for the first time on
this LCD TV, you have to operate “Auto Scan”
procedure. It can keep you to auto search TV channels.
Press the ▲▼ button to select the Auto Scan and press the ENTER button to start auto scan. The
screen will display shown below:
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and
memorize the programs by sequence automatically.
During tuning, press the MENU button to exit the auto scan mode.
- 22 -
TV Function
Prog Organs
Press the ▲▼ button to select the
Prog Organizer and press the ENTER
button to enter the menu shown on the
right.
In the Prog Organizer setup menu,
press the ▲▼ button to select the
desired item. Press the MENU button
to return to the previous menu.
Channel Name (To customize the channel name/# of the TV channels)
Press the ▲▼ button to select the Channel Name and press the ENTER button to enter. Then
1. Press the ▲▼ button to select letters or press the number button to input numbers.
2. Press the MENU button to return to the previous menu.
Skip (To skip the channel/channels you don’t want to watch)
1. Press the ▲▼ button to select Skip and press the ENTER button to activate or cancel this
function.
2. Press the MENU button to return to the previous menu.
Swap (To swap the channels’ numbers)
1. Press the ▲▼ button to select Swap from Ch and press the ENTER button to enter.
2. Press the number buttons to select program number.
3. Repeat the above operations to Swap To Ch.
4. Press the ▲▼ button to select Perform Swap and press the ENTER button to confirm.
Manual Install
Press the ▲▼ button to select the
Manual Install and press the ENTER
button to enter the menu shown on the
right.
In the Manual Install setup menu,
press the ▲▼ button to select the
desired item. Press the MENU button
to return to the previous menu.
- 23 -
TV Function
Search (To manually search the TV channels)
1. Press the ▲▼ button to select Search and press the ► or ◄ to start searching forward or
backward.
2. Press the MENU button to return to the previous menu.
Color System (To manually adjust the color settings of the TV channels)
1. Press the ▲▼ button to select Color System and press the ENTER button to enter.
2. Press the MENU button to return to the previous menu.
Fine Tune
This feature allows for minor adjustments to the integrated electronic tuner’s ability to tune in weak
broadcast signals or where applicable solve minor irregularities in cable channel tuning parameters.
1. Press the ▲▼ button to select Fine Tune. Press the ► or ◄ controls to start fine tuning
forward or backward.
2. Press the MENU button to return to the previous menu.
CH NO (To manually set the channel number)
1. Press the ▲▼ button to select CH NO and press the ENTER button to enter.
2. Press the number buttons to enter the channel number. Press the MENU button to return to the
previous menu.
Store (To save and store the above operations)
Press the ▲▼ button to select Store and press the ENTER button to store the above operations.
NOTE: The “CH NO” and “Store” items only function when the program is searched out.
Factory Reset (To reset all settings to factory
default status)
Press the ▲▼ button to select “Yes” or “No”. Select “Yes ” and press the ENTER button
to reset all settings to default status; select “No” and press the ENTER button to cancel factory
reset and it will return to the previous menu.
SCART Mode (To select SCART external signals for the unit)
Press the ▲▼ button to select SCART Mode and press the ENTER button to enter. Press the ▲▼
button to select “Auto” or “Manual” and press the ENTER button to confirm. Press the MENU button
to return to the previous menu.
Language (To select the displayed
language)
1. Press the ▲▼ button to select the
Language.
2. Press the ENTER button to enter the
setup.
3. Press the ▲▼ button to select item. Press
the MENU button to return to the previous
menu.
- 24 -
NICAM Function
The unit support NICAM function under TV mode.
Under NICAM TV broadcast:
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Stereo and Mono. The screen will appear
corresponding display as shown below:
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among Nicam I, Nicam II, Nicam I+II and Mono.
The screen will appear corresponding display as shown below:
3. When receiving mono audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Mono and Mono. The screen will appear
corresponding display as shown below:
Under A2 TV broadcast:
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Stereo and Mono. The screen will appear
corresponding display as shown below:
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among I, II and I+II. The screen will appear
corresponding display as shown below:
3. When receiving mono audio signals, press the STEREO/AUDIO button on the remote control to
display sound track Mono on the screen.
- 25 -
DVD Playback Operation
Disc Loading Steps:
1. Connect the unit to the power supply and press the POWER to turn on the unit.
2. Press the SOURCE button to select DVD mode.
3. Handing the disc with its printed side outward vertically to the disc tray and gently insert the
disc into the disc tray slot.
4. The disc will draw into the unit and load automatically.
WARNING: Do not play poor quality discs that may damage the player’s len.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don’t match, the disc cannot be played. This player’s default code is region 2.
Play
After loading a DVD disc, disc menu will appear on the screen if the disc includes the menu. Press
thePLAY button to start playback.
Stop
During playback, press the ■STOP button once to stop playback, and press the PLAY button to
resume normal playback. Press this button twice repeatedly to stop playback completely.
Pause
During playback, press the
PAUSE button once to pause the playback; press it repeatedly to start
step-by-step playback. Press the PLAY button to resume normal playback.
Previous and Next
Press the button to go to the next chapter. Press the button once to return to the beginning of
the current chapter or track; press it twice to go to the previous chapter.
- 26 -
DVD Playback Operation
Fast Playback
During playback, press the button to activate fast backward or forward playback. During fast
playback, press the PLAY button to resume normal playback.
SLOW
During playback, press the
SLOW button to activate slow playback. During slow playback,
press the PLAY to resume normal playback.
Repeat
Use the
REPEAT button repeatedly to repeat a chapter, title or all.
NOTE: Some discs do not support the repeat function.
Menu
Normally there is a selecting menu for DVD discs. You can press the
MENU button (under
DVD mode) to enter the menu, and use the direction buttons to highlight an item. Then press the
ENTER button to confirm.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can
select any title or chapter quickly by entering the relevant number.
Language (Audio)
There can be up to 8 audio languages on a DVD disc. Press the AUDIO button to select audio
language if the disc includes multi-audio languages.
Subtitle
The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can
press the SUBTITLE button on the remote control to select different subtitles.
GOTO
During DVD disc playback, press the
GOTO button on the remote control once, there will be a
menu displayed on the screen. You can set or select items for your preference. Use the
direction buttons to select items and press the ENTER button to enter. Use the direction
buttons to select the desired item. Press the direction button to return. When select the
Title/Chapter, TT Time/CH Time, use number buttons to input desired title/chapter number time.
NOTE: Some DVD discs do not support the search function.
Various Camera Angles
The movies on some discs have been recorded from various camera positions. This lets you enjoy
the same scene from different perspectives. If that’s the case, you’ll usually find a marking on the
DVD sleeve.
When playing a DVD containing various camera angles, the camera symbol will appear on the
screen.
Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be
adjusted in seconds.
- 27 -
DVD Playback Operation
CD Playback
Play
After loading a CD disc, the unit will play all tracks on the disc by default. You can use the
button, or number buttons to select a track.
Stop
Press the ■ STOP button once to stop playback and press the PLAY button to resume normal
playback. Press this button twice repeatedly to stop playback completely.
Pause
Press the
PAUSE button to pause the playback and then press the PAUSE button again or
PLAY button to resume normal playback.
Previous and Next
Press the button once to go the beginning of this track. Press twice repeatedly to go the previous
track.
Press the button to play from the beginning of the next track.
Fast Playback
During playback, press the button to activate fast forward playback; press the button to
activate fast backward playback. During fast playback, press the Play button to resume normal
playback.
GOTO
Press the
GOTO button to select desired playback time or track. Press this button repeatedly
to select Disc Go To, Track Go To or Select Track. Use the 0-9 buttons to enter the desired
playback time or track and press the ENTER button to play.
Repeat
Use the
REPEAT button repeatedly to repeat Track, All or to cancel repeat.
NOTE: Some discs do not support the repeat function.
Audio
During CD playback, press the AUDIO button on the remote control to select the audio output mode:
Mono Left, Mono Right, Mix-Mono or Stereo.
- 28 -
DVD Playback Operation
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image and has low
loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG
photo albums, you can ask your film development company to make a ”PICTURE CD” when they
develop your film.
Play
After loading a JPEG disc, a root menu will appear on the screen. Use the ENTER button and the
button to select a submenu, and then use the button to select the contents.
NOTE: Many discs have other contents besides pictures.
Stop
Press the ■ STOP button to preview the pictures behind currently playing picture in the way of small
pictures. Press the PLAY button to resume normal playback.
Pause
During playback, press the
PAUSE button to pause playback and press the PAUSE button
again or PLAY button to resume playback.
Repeat
During playback, press the
REPEAT button repeatedly. The repeat modes are Shuffle,
Random, Single, Repeat One, Repeat All and Repeat Off.
Previous and Next
During playback, press the button to select picture.
Menu
Press the
MENU button once to stop playback and return to the root menu.
GOTO
During playback, press the
GOTO button to select desired picture. Use the number buttons to
input the file number and press the ENTER button to play the picture.
Picture Rotation
This can be used only when the picture is normally displayed. Once another picture is selected,
rotation will be cancelled automatically. Use the buttons to rotate the picture.
NOTE: Some JPEG disc may not support rotating function.
- 29 -
USB and SD/MS/MMC Card Function
USB and SD/MS/MMC Card Function
Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE button to shift to DVD mode.
4. Insert the USB memory stick into the unit’s USB slot, or insert the SD/MS/MMC card into the
SD/MS/MMC card slot on the right side of the unit. Please see the below figure:
NOTE: Make sure that files are stored in the USB and SD/MS/MMC card before connection.
5. Press the CARD button to shift among disc playback, USB playback and SD/MS/MMC
playback. The default state is disc playback. Please see the below figure:
6. Press the buttons to select the folder and press the ENTER button to enter.
7. Press the buttons to select the desired track. Then press the PLAY button to start
playback.
8. Press the STOP button to stop playback. Press the button to return to the folder menu.
NOTE:
1. The screen display will vary from disc to disc.
2. Pull out the USB memory stick or SD/MS/MMC card directly after the files are played.
Then the unit will be in the state of disc playback again.
00:00 00:00
001/002
BAK
JPEG
- 30 -
DVD System Setup
Preparations
1. Connect to the power supply and turn on the unit.
2. Press the SOURCE button to shift to DVD mode.
3. Press the SETUP button on the remote control to display the settings menu. The menu includes
General setup, Audio setup, Video setup, Preference and Password setup.
4. Press the direction buttons on the remote control to select a category. All the items in the
category will appear on the screen.
5. Press the SETUP button again to exit the setup.
General Setup Page
Press the SETUP button to enter the General setup menu. The screen will display as the below:
TV Display
Angle Mark
In the menu, Use the direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the button to return.
1. Press the direction buttons to select T
V
Display.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select the
desired items.
4.
Press the ENTER button again to confirm
selection and return.
1. Press the direction buttons to selec
t
Angle Mark.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select On o
r
Off.
4.
Press the ENTER button again to confirm
selection and return.
- 31 -
DVD System Setup
OSD Lang
Captions
Screen Saver
Last Memory
The item is used to select the OSD (on screen
displayed) language.
1. Press the direction buttons to select OSD
Lang.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select items.
4. Press the ENTER button again to confirm
selection and return.
1. Press the direction buttons to selec
t
Screen Saver.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select On o
r
Off.
4.
Press the ENTER button again to confirm
selection and to return.
1. Press the direction buttons to select Last
Memory.
2. Press the ENTER button to enter the setup.
3. Use the direction buttons to select On o
r
Off.
4. Press the ENTER button again to confirm
selection and return.
1. Press the direction buttons to selec
t
Captions.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select On o
r
Off.
4.
Press the ENTER button again to confirm
selection and return.
- 32 -
DVD System Setup
Media Center
Audio Setup Page
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select Audio Setup Page, the screen will display as the below:
Dolby Digital Setup
Dual Mono
In the menu, Use the direction buttons to
select the desired item. Press the ENTER button to
confirm the item. Press the button to return.
1. Press the direction buttons to selec
t
Dolby Digital.
2. Press the ENTER button to enter the setup, the
screen will display as left:
3.
In the menu, use the direction buttons to
select the desired item on the list.
4.
Press the ENTER button to enter the setup.
Press the button to return.
1. Press the direction buttons to select Dual
Mono.
2. Press the ENTER button to enter the setup.
3.
Use the direction buttons to select the
desired item.
4.
Press the ENTER button again to confirm
selection and return.
1.
Press the direction buttons to selec
t
Media Center.
2.
Press the ENTER button to enter the setup.
3.
Use the direction buttons to select DVD,
USB, SD/MMC or MS.
4.
Press the ENTER button again to confirm
selection and return.
- 33 -
DVD System Setup
Dynamic
Hdcd Setup
In the Audio Setup Page, use the direction buttons to select Hdcd Setup. Press the ENTER
button to enter the setup and the screen will display as below:
Video Setup
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select Video Setup Page, the screen will display as the below:
1. Press the direction buttons to selec
t
Dynamic.
2. Press the ENTER button to enter the setup, the
screen will display as left.
3. Press the ENTER button to enter.
4. Use the direction buttons to adjust.
5.
Press the ENTER button again to confirm
setting and return.
6.
Press the button to return.
1. In the menu, press the ENTER button to ente
r
the setup.
2. Use the direction buttons to select items.
3. Press the ENTER button again to confirm
selection and return.
4.
Press the button to return.
In the menu, Use the direction buttons to
select the desired item. Press ENTER button to
enter the item. Press the button to return.
- 34 -
DVD System Setup
Video Quality Setup
Select Quality, press the ENTER button to enter the menu as below:
Sharpness
Brightness
Contrast
1. In the menu, Use the direction buttons to
select the desired item.
2. Press the ENTER button to enter the item.
3. Press the button to return.
1. Press the direction buttons to selec
t
Sharpness.
2. Press the ENTER button to enter the setup.
3. Use the direction buttons to select High,
Medium or Low.
4. Press the ENTER button again to confirm
selection and return.
1. Press the direction buttons to selec
t
Brightness.
2. Press the ENTER button to enter the setup, the
screen will display as left.
3. Use the direction buttons to adjust the
level.
4. Press the ENTER button again to confirm
setting and return.
1. Press the direction buttons to selec
t
Contrast.
2. Press the ENTER button to enter the setup, the
screen will display as left.
3. Use the direction buttons to adjust the
level.
4. Press the ENTER button again to confirm
setting and return.
- 35 -
DVD System Setup
NOTE: This item is allowed to set when there is no disc or all the operation
has been stopped.
Preference Setup
Press the SETUP button to enter the General setup menu, then use the direction buttons to
select Preference Page, the screen will display as the below:
Audio
Subtitle
Disc Menu
In the menu, Use the direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the button to return.
1. Press the direction buttons to selec
t
Audio.
2. Press the ENTER button to enter the setup,
see the left figure:
3. Press the direction buttons to select audio
language.
4. Press the ENTER button again to confirm
setting and return.
1. Press the direction buttons to selec
t
Subtitle.
2. Press the ENTER button to enter the setup,
see the left figure.
3. Press the direction buttons to selec
t
Subtitle language.
4. Press the ENTER button again to confirm
setting and return.
1. Press the direction buttons to select Disc
Menu.
2. Press the ENTER button to enter the setup,
see the left figure.
3. Press the direction buttons to select Menu
language.
4. Press the ENTER button again to confirm
setting and return.
- 36 -
DVD System Setup
Parental
NOTE: If you forget the password, you can
Default
Password Setup
Press the SETUP button to enter the setup menu, then use the direction buttons to select
Password Setup Page, the screen will display as the below:
1. Press the direction buttons to selec
t
Default.
2. Press the ENTER button to select Reset.
3. Press the ENTER button, all the settings will
return to the default status.
In the menu, Use the direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the button to return.
DVD discs equipped with the child lock function are
rated according to their contents and settings var
y
from disc to disc. Depending on the disc, you can
lock out playback of the disc altogether.
1. Press the direction buttons to selec
t
Parental.
2. Press the ENTER button to enter the setup,
see the left figure:
3. Press the direction buttons to select item.
4. Press the ENTER button again to confirm
setting, and you should enter the password.
The Default Password is 3308.
5. Press the ENTER button again to confirm
setting and return.
- 37 -
DVD System Setup
Password Mode
Password Change
1. Press the direction buttons to selec
t
Password Mode.
2. Press the ENTER button to enter the setup,
see the left figure.
3. Press the direction buttons to select On o
r
Off.
4. Press the ENTER button again to confirm
setting and return.
You can change the password by yourself.
1. Press the direction buttons to selec
t
Password.
2. Press the ENTER button to enter the setup,
see the left figure.
3. Press the ENTER button again to change the
password.
4.
A
ccording to the indication in the menu, Use
the number buttons to input the old password,
then input the new password, then input again
to confirm. Press the ENTER button again to
confirm setting and return. The password has
been changed successfully.
5. The Default Password is 3308.
- 38 -
Troubleshooting
SYMPTOM CHECK ITEM
The player cannot play.
Make sure disc is loaded in.
Make sure disc is loaded upside down.
Make sure disc is not dirty or warped.
Make sure the player’s region code is the same as region code
of DVD disc.
Make sure water condensation has not occurred. If it occurs,
take out disc and leave the player on for at least one hour.
There is no sound.
Make sure system connection is correct.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
Make sure the speakers are not muted.
In the TV mode, set the correct sound mode.
LCD is no display
Make sure the unit is turned on and the connections are
correct.
Make sure the power adapter is correctly connected.
Cannot continue to play and
play a section repeatedly.
Make sure is not in repeat status.
Make sure disc is not dirty or damaged.
There is no picture or picture
move up and down unsteady.
Check if the connections with the external AV signal source
are correct.
Correctly set the items in the picture menu.
Check if the video type input signal is not corresponding to the
unit.
Make sure the unit is turned on and in correct video type.
The remote control does not
work.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
Other Notes:
Static or other external interfere may cause the player to behave abnormally. In this occurs, unplug
the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist,
then please disconnect the power and consult a qualified technician.
- 39 -
Specifications
TFT-LCD Resolution 1440 x 900
TFT-LCD Screen Size 19 inches
Power
AC100～240V，50/60Hz
DC 12V
Power Consumption < 60W
Dimension
494mm × 184mm × 412mm（LXWXD）
Weight About 9.2 Kg
Ambient Temperature
10~45℃
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.
With over 50,000 products in stock we can deliver direct to your door the very next day.
Visit www.partmaster.co.uk
or call
0870 6001 338
(UK customers only)
Calls charged at National Rate.
This symbol on the product or in the instructions means that your electrical
equipment should be disposed at the end of its life separate from you
r
household waste. There are separate collection systems for recycling in
the EU.
For more information, please contact the local authority or your retaile
r
where you purchased the product.
Loading...