How it Works
Logik
Loading...
LCHOBTC10
Installation Manual
24 pgs4.69 Mb0

Logik LCHOBTC10 Installation Manual

Download
Page 1
Built-in Ceramic Hob
Instruction / Installation Manual LCHOBTC10
LCHOBTC10_IB_110506.indd 1 5/6/11 1:47 PM
Page 2
LCHOBTC10_IB_110506.indd 2 5/6/11 1:47 PM
Page 3
Contents
Unpacking ..................................................................................................................................... 4
Product Overview ......................................................................................................................... 5
Before Using Your New Ceramic Hob .......................................................................................... 6
Choosing the Right Cookware ..................................................................................................... 6
Using the Touch Controls ............................................................................................................. 7
Using Your Ceramic Hob ............................................................................................................... 7
- To Lock the Controls .....................................................................................................................................8
- To Unlock the Controls ................................................................................................................................8
Using the Timer ............................................................................................................................. 9
Setting the Timer to Turn Cooking Zones O ............................................................................................. 10
Cooking Guidelines ....................................................................................................................12
Cooking Tips ............................................................................................................................................................ 12
- Simmering, Cooking Rice ........................................................................................................................12
- Searing Steak ...............................................................................................................................................12
- For Stir-Frying .............................................................................................................................................. 12
Heat Settings ........................................................................................................................................................... 13
Cleaning and Maintenance ........................................................................................................14
Hints and Tips ............................................................................................................................. 15
Specication ............................................................................................................................... 15
Installation .................................................................................................................................. 16
Preparing the Worktop ........................................................................................................................................16
Ensuring Adequate Ventilation ........................................................................................................................16
Fastening the Fixing Brackets ...........................................................................................................................17
Connecting the Hob to the Mains Power Supply ......................................................................................17
Safety Warnings .......................................................................................................................... 19
LCHOBTC10_IB_110506.indd 3 5/6/11 1:47 PM
Page 4
4
Thank you for purchasing your new Logik Built-in Ceramic Hob.
We recommend that you spend some time to read this manual in order to fully understand how to install and operate it correctly.
Read all the safety warnigs carefully before use and keep this manual for future reference.
Main Unit
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Brackets × 4
P.N.: 303207800067
GB818 / M4*10-PFH Screw × 4 for securing the bracket.
P.N.: 301500101084
Instruction / Installation Manual
P.N.: LCHOBTC10-005
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
LCHOBTC10_IB_110506.indd 4 5/6/11 1:47 PM
Page 5
5
Product Overview
Top View
1. Max. 1200 W Zone
2. Max. 1800 W Zone
3. Max. 1200 W Zone
4. Max. 1800 W Zone
5. Glass Plate
6. ON / OFF
7. Control Panel
Control Panel
1. On/Off Control
2. Power Regulating Controls
3. Keylock Control
4. Timer
6
3
7
5
4
1
2
3 12
4
LCHOBTC10_IB_110506.indd 5 5/6/11 1:47 PM
Page 6
6
Before Using Your New Ceramic Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your ceramic hob.
Choosing the Right Cookware
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
• Occasionally the heated areas may be seen to switch on and off when higher heat settings are used. This is due to a safety device, which prevents the glass from overheating. Some switching on and off when cooking at high temperatures, e.g. deep fat frying is quite normal, causes no damage to the hob and little delay in cooking times. Excessive switching may however be caused by the use of an unsuitable saucepan or a saucepan which is smaller than the heated area. If excessive switching occurs, discontinue the use of the saucepan.
• To improve performance, and reduce energy, always use pans with close fitting lids.
LCHOBTC10_IB_110506.indd 6 5/6/11 1:47 PM
Page 7
7
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger.
• You will hear an audible tone each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. an utensil or a cloth) covering
them. Even a thin film of water may make the controls difficult to operate.
3. Select a heat setting by touching the or controls. The unit will start from setting 5.
If you don’t choose a heat setting within 1 minute, the ceramic hob will automatically switch back to standby mode. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
Using Your Ceramic Hob
To Start Cooking
1. Touch the ON/OFF control.
After turning on, you will hear an available tone. All the indicators light up for 1 minute then go out, indicating that the ceramic hob has entered standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
Do not place hot pans over the control panel as this may cause damage.
LCHOBTC10_IB_110506.indd 7 5/6/11 1:47 PM
Page 8
8
2. Beware of hot surfaces
will display to show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.
Locking the Controls
• You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
To Lock the Controls
1. Make sure that the ceramic hob is turned on but no cooking zone is in use.
2. Touch the keylock control. The timer indicator will show “ “
To Unlock the Controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the keylock control for 2 seconds.
3. You can now start using your ceramic hob.
Or, turn the whole cooktop off by touching the ON/OFF control.
When You Have Finished Cooking
1. Turn the cooking zone off by scrolling down to – or touching and controls together. Make sure
the display shows – .
OR
Do not lock the controls while a cooking zone is in use. In an emergency, you can always turn the ceramic hob off with the ON/OFF control.
LCHOBTC10_IB_110506.indd 8 5/6/11 1:47 PM
Page 9
9
Using the Timer as a Minute Minder
1. Make sure the ceramic hob is turned ON.
Over-Temperature Protection
A temperature sensor monitors the temperature inside the ceramic hob.
When an excessive temperature is monitored, the ceramic hob will stop operation automatically.
Residual Heat Warning
When the hob has been operating for some time,there will be some residual heat. The letter “ ”appears to warn you to keep away from it.
Auto Shutdown
Another safety feature of the hob is auto shutdown. This occurs whenever you forget to switch off a cooking zone. The default shutdown times are shown in the table below:
Power Level 1 2 3 4 5 6 7 8 9
Default Working Timer (Hour) 8 8 8 4 4 4 2 2 2
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
Timer Overview
Minute display
shows the number of minutes set/ remaining for:
• the cooking zone whose indicator dot is ashing
You can use the minute minder even if you’re
not using any cooking zones.
LCHOBTC10_IB_110506.indd 9 5/6/11 1:47 PM
Page 10
10
2. Set the time by touching the or controls of the timer.
• Touch the or controls of the timer
once to increase or decrease by 1 minute.
• Touch and hold the or control of the timer to increase or decrease by 10 minute.
• If the setting time exceeds 99 minutes, the
timer will automatically return to – –.
3. Touching the or controls together, the timer is
cancelled, and the – – will show in the minute display.
5. When the set time has elapsed, an available tone will sound for 30 seconds and – – will show in the display.
4. When the timer is set, it will begin to count down immediately. The display will show the remaining time and the timer indicator will flash for 5 seconds.
Setting the Timer to Turn Cooking Zones O
1. Touch the or controls of the corresponding cooking zone you want to set the timer for.
The red light of the desired cooking zone will illuminate.
LCHOBTC10_IB_110506.indd 10 5/6/11 1:48 PM
Page 11
11
4. When the time is set, the timer will begin to count down immediately.
The display will show the remaining time and the timer indicator will flash for 5 seconds.
3. Touch the and controls together to cancel the timer. – – will show in the minute display.
The red dot next to the power level indicator
will illuminate indicating that zone is selected.
5. When the set time has elapsed, the corresponding cooking zone will switch off automatically.
• Other cooking zones will keep operating if they are turned on.
• If you want to change the time after the timer is set, you have to start from step 1.
2. While the power level indicator is flashing, set the time by
touching the or controls of the timer.
• Touch the or controls of the timer once to increase or decrease by 1 minute.
• Touch and hold the or controls of the timer to increase or decrease by 10 minutes.
• If the setting time exceeds 99 minutes, the timer will automatically return to – –.
LCHOBTC10_IB_110506.indd 11 5/6/11 1:48 PM
Page 12
12
Cooking Guidelines
Cooking Tips
• When food comes to the boil, reduce the temperature setting.
• Using a lid will reduce cooking times and save energy by retaining the heat.
• Minimise the amount of liquid or fat to reduce cooking times.
• Start cooking on a high setting and reduce the setting when the food has heated through.
Simmering, Cooking Rice
• Simmering occurs below boiling point, at around 85˚C, when bubbles are just rising occasionally to the surface of the cooking liquid. It is the key to delicious soups and tender stews because the flavours develop without overcooking the food. You should also cook egg-based and flour thickened sauces below boiling point.
• Some tasks, including cooking rice by the absorption method, may require a setting higher than the lowest setting to ensure the food is cooked properly in the time recommended.
Searing Steak
To cook juicy flavoursome steaks:
1. Stand the meat at room temperature for about 20 minutes before cooking.
2. Heat up a heavy-based frying pan.
3. Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat
onto the hot pan.
4. Turn the steak only once during cooking. The exact cooking time will depend on the thickness of the steak
and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press the steak to gauge how cooked it is – the firmer it feels the more ‘well done’ it will be.
5. Leave the steak to rest on a warm plate for a few minutes to allow it to relax and become tender before
serving.
For Stir-Frying
1. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook
the food in several smaller batches.
2. Preheat the pan briefly and add two tablespoons of oil.
3. Cook any meat first, put it aside and keep warm.
4. Stir-fry the vegetables. When they are hot but still crisp, turn the cooking zone to a lower setting, return the
meat to the pan and add your sauce.
5. Stir the ingredients gently to make sure they are heated through.
6. Serve immediately.
Take care when frying as oil and fat heat up very quickly. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk.
LCHOBTC10_IB_110506.indd 12 5/6/11 1:48 PM
Page 13
13
Percentage of power %
100
80
60
40
20
0
1 2 3 4 5 6 7 8 9
Heat setting
Heat Settings
The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the amount you are cooking. Experiment with the ceramic hob to find the settings that best suits you.
Heat setting Suitability
1 - 2 • delicate warming for small amounts of food
• melting chocolate, butter, and foods that burn quickly
• gentle simmering
• slow warming
3 - 4 • reheating
• rapid simmering
• cooking rice
5 - 6 • pancakes
7 - 8 • sautéing
• cooking pasta
9 • stir-frying
• searing
• bringing soup to the boil
• boiling water
LCHOBTC10_IB_110506.indd 13 5/6/11 1:48 PM
Page 14
14
Cleaning and Maintenance
What? How? Important!
Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass)
1. Switch the power to the ceramic hob off.
2. Apply a ceramic hob cleaner while the glass is still warm (but not hot!)
3. Rinse and wipe dry with a clean cloth or paper towel.
• When the power to the ceramic hob is switched off, there will be no ‘hot surface’ indication but the cooking zone may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon scourers and harsh/abrasive cleaning agents may scratch the glass. Always read the label to check if your cleaner or scourer is suitable.
• Never leave cleaning residue on the ceramic hob: the glass may become stained.
Boilovers, melts, and hot sugary spills on the glass
Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass ceramic hobs, but beware of hot cooking zone surfaces:
1. Switch the power to the ceramic hob off.
2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the ceramic hob.
3. Clean the soiling or spill up with a dish cloth or paper towel.
4. Follow steps 2 to 3 for ‘Everyday soiling on glass’ above.
• Remove stains left by melts and sugary food or spillovers as soon as possible. If left to cool on the glass, they may be difficult to remove or even permanently damage the glass surface.
• Cut hazard: when the safety cover is retracted, the blade in a scraper is razor-sharp. Use with extreme care and always store safely and out of reach of children.
Spillovers on the touch controls
1. Switch the power to the ceramic hob off.
2. Soak up the spill
3. Wipe the touch control area with a clean damp sponge or cloth.
4. Wipe the area completely dry with a paper towel.
• The ceramic hob may make an available tone or turn itself off, and the touch controls may not function while there is liquid on them. Make sure you wipe the touch control area dry before turning the ceramic hob back on.
LCHOBTC10_IB_110506.indd 14 5/6/11 1:48 PM
Page 15
15
Hints and Tips
Problem Possible Causes What To Do
The cooktop cannot be turned on.
No power. Make sure the ceramic hob is
connected to the mains power supply and that it is switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call a qualified technician.
The touch controls are unresponsive.
The controls are locked. Unlock the controls. See section
‘Using your ceramic hob’ for instructions.
The touch controls are difficult to operate.
There may be a slight film of water over the controls or you may be using the tip of your finger when touching the controls.
Make sure the touch control area is dry and use the ball of your finger when touching the controls.
The glass has been scratched. Rough-edged cookware.
Unsuitable, abrasive scourer or cleaning products being used.
Use cookware with flat and smooth bases. See ‘Choosing the right cookware’.
See ‘Care and cleaning’.
Specication
Model LCHOBTC10
Rated Voltage 230 – 240V~
Rated Frequency 50 Hz
Overall Dimension (W x D X H) 590 (W ) × 520(D) × 55(H) (in mm)
Power Consumption 6000 – 6600W
Features and specifications are subject to change without prior notice.
LCHOBTC10_IB_110506.indd 15 5/6/11 1:48 PM
Page 16
16
56cm
49cm
5cm (min)
5cm (min)
5cm (min)
5cm (min)
Installation
Preparing the Worktop
Cut out the work surface following the dimensions shown in the drawing below.
For the purpose of installation and use, a minimum distance of 5cm space must be left around the cut out.
Be sure the thickness of the work surface is at least 20mm. Use a heat-resistant work surface material to avoid deformation caused by the heat from the hob. The minimum distance between the hob and the cupboard should be at least 65cm.
Ensuring Adequate Ventilation
Always make sure the ceramic cooker hob is well ventilated and that the air inlet and outlet are not blocked. This hob requires an adequate supply of fresh, cool air to fully function. The base of the hob must have direct unrestricted ventilation to the room where the hob is installed. Follow the requirements below.
65 cm (min)
5mm
5cm
2 cm (min)
Heat Resistant Board
There are ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the worktop, when you put the hob into position.
LCHOBTC10_IB_110506.indd 16 5/6/11 1:48 PM
Page 17
17
Connecting the Hob to the Mains Power Supply
1. Remove the screw A. 2. Push the top plate back and then lift it up.
3. Remove the 2 screws B. 4. Remove the 4 screws C in the terminal box and insert the power cord at the connection.
screw
bracket
base screw hole
screw A
screw B
screw C
Fastening the Fixing Brackets
The unit should be placed on a stable, smooth surface (use the packaging).
1. Turn the hob upside down, place it on a soft surface and fasten the brackets to the appropriate holes. DO NOT tighten the screws at this stage.
2. Apply sealing strips around the edge of the hob.
• The hob must be installed by qualified personnel or technicians.
• The hob should not be mounted above cooling equipment, dishwashers and rotary dryers.
• All surfaces around the hob should be able to withstand the heat generated by the hob.
• Never use a steam cleaner to clean the hob.
• Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to
remove the hob from the aperture, particularly if it needs to be serviced.
LCHOBTC10_IB_110506.indd 17 5/6/11 1:48 PM
Page 18
18
6. Fix the top plate.
The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker the method of connection is shown below.
5. Assemble the cable clamp, be aware that the ellipse hole on cable clamp must match the ellipse hole on. Fix the top plate.
3 × 6 mm2 / 3 × 2.5 mm
2
• This appliance must be earthed.
• For this connection a power lead of
wire type H05VV-F should be used.
PE L N
L1 L2 N
• If the mains cable is damaged and needs to be replaced, this should be done by a qualified person using the proper tools, so as to avoid any accidents.
• If the ceramic hob is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations.
• The mains cable must not be bent or compressed.
• The mains cable must be checked regularly and only replaced by a qualified person.
LCHOBTC10_IB_110506.indd 18 5/6/11 1:48 PM
Page 19
19
Safety Warnings
Your safety is important to us. Please read this information before using your ceramic hob.
Installation
Electrical Shock Hazard
• Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it.
• Connection to a good earth wiring system is essential and mandatory.
• Alterations to the domestic wiring system must only be made by a qualied electrician.
• Failure to follow this advice may result in electrical shock or death.
Cut Hazard
• Take care - panel edges are sharp.
• Failure to use caution could result in injury or cuts.
Important safety instructions
• Read these instructions carefully before installing or using this appliance.
• No combustible material or products should be placed on this appliance at any time.
• Please make this information available to the person responsible for installing the appliance as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must be installed according to these instructions for installation.
• This appliance must be installed and earthed only by a suitably qualied person.
• This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the mains power supply.
• Failure to install the appliance correctly could invalidate any warranty or liability claims.
Operation and Maintenance
Electrical Shock Hazard
• Do not cook on a broken or cracked ceramic hob. If the ceramic hob surface should break or crack, switch the appliance o immediately at the mains power supply (wall switch) and contact a qualied technician.
• Switch the ceramic hob o at the socket before cleaning or maintenance.
• Failure to follow this advice may result in electrical shock or death.
Health Hazard
• This appliance complies with electromagnetic safety standards.
• Failure to follow this advice may result in death.
Hot Surface Hazard
• During use, accessible parts of this appliance will become hot enough to cause burns.
• Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool.
• Never leave metal objects (such as kitchen utensils) or empty pans on the induction hob as they can become hot very quickly.
• Keep children away.
• Handles of saucepans may be hot to touch. Check
saucepan handles do not overhang other cooking zones that are on. Keep handles out of the reach of children.
• Failure to follow this advice could result in burns and scalds.
Cut Hazard
• The razor-sharp blade of a ceramic hob scraper is exposed when the safety cover is retracted. Use with extreme care and always store safely and out of reach of children.
• Failure to use caution could result in injury or cuts.
LCHOBTC10_IB_110506.indd 19 5/6/11 1:48 PM
Page 20
20
Important safety instructions
• Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite.
• Never use your appliance as a work or storage surface.
• Never use your appliance for warming or heating the room.
• After use, always turn o the cooking zones and the ceramic hob as described in this manual (i.e. by using the touch controls).
• Do not allow children to play with the appliance or sit, stand, or climb on it.
• Do not store items of interest to children in cabinets above the appliance. Children climbing on the ceramic hob could be seriously injured.
• Do not leave children alone or unattended in the area where the appliance is in use.
• Do not repair or replace any part of the appliance unless specically recommended in the manual. All other servicing should be done by a qualied technician.
• Do not use a steam cleaner to clean your ceramic hob.
• Do not place or drop heavy objects on your ceramic hob.
• Do not stand on your ceramic hob.
• Do not use pans with jagged edges or drag pans
across the ceramic glass surface as this can scratch the glass.
• Do not use scourers or any other harsh abrasive cleaning agents to clean your ceramic hob, as these can scratch the ceramic glass.
• If the mains cable is damaged, it must be replaced by a qualied technician.
• Do not operate your ceramic hob by means of an external timer or separate remote-control system.
• WARNING: If the surface is cracked, switch o the appliance to avoid the possibility of electric shock.
• Do not leave any objects such as knives, forks, spoons and lid should not be placed on the hob surface since they can get hot.
• This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety.
LCHOBTC10_IB_110506.indd 20 5/6/11 1:48 PM
Page 21
If you require a replacement for any of the items listed below, please quote their corresponding part numbers:
Replacement Part Part Number
Bracket 303207800067
GB818 / M4*10-PFH Screw 301500101084
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
DSGRetailLtd.•MaylandsAvenue•HemelHempstead
Herts•HP27TG•England
(P.N.: LCHOBTC10-005)
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.
LCHOBTC10_IB_110506.indd 21 5/6/11 1:48 PM
Page 22
LCHOBTC10_IB_110506.indd 22 5/6/11 1:48 PM
Page 23
LCHOBTC10_IB_110506.indd 23 5/6/11 1:48 PM
Page 24
LCHOBTC10_IB_110506.indd 24 5/6/11 1:48 PM
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use