How it Works
Logik
Loading...
L612WM12

Logik L612WM12 Installation Manual / Instruction Manual

6KG Washing Machine
Installation Guide / Instruction Manual L612WM12
Contents
Unpacking .................................................................................................................................... 5
Installing Your Washing Machine ............................................................................................... 6
Moving and Installing ................................................................................................................. 7
Product Overview ...................................................................................................................... 11
Preparation ................................................................................................................................12
Wash Setting .............................................................................................................................. 14
Important Information .............................................................................................................. 17
Maintenance - Cleaning the Washing Machine ....................................................................... 19
Hints and Tips ............................................................................................................................ 21
Troubleshooting ........................................................................................................................ 23
Specication .............................................................................................................................. 25
Product Fiche ............................................................................................................................. 26
Safety Warnings ......................................................................................................................... 27
5
L612WM11
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
The Main Unit
Thank you for purchasing your new Logik Washing Machine.
You must spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this installation/ instruction manual for future reference.
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
Transit Bolt Cover Cap x 4
P.N.: 40014437
Liquid Detergent Level Plate
x 1
P.N.: 42019158
Water Supply Hose x 1
P.N.: 40014423
U-Shape Drain Hose Holder x 1
P.N.: 40020601
For xing the water drain hose.
Instruction Manual
P.N.: 52067656
Installing Your Washing Machine
Please read and follow the instructions carefully.
• In addition to the instructions mentioned here, special regulations of the relevant water and power supply companies may apply. If in doubt, have the washing machine connected by a qualified technician.
• The washing machine is heavy - caution when lifting it. Do not lift by projecting components (e.g. washing machine door).
• Warning: Frozen hoses may tear/burst. Do not install washing machine in outdoor areas or where there is a risk of frost.
• Lay hoses and cables in such a way that there is no risk of tripping over them.
Choosing the Right Location for Your Washing Machine
• Make sure there’s enough space for your washing machine.
• Install your washing machine on a flat, stable surface to avoid excessive vibrations and noise.
• Don’t install your washing machine in direct sunlight or in a place where temperatures can reach
freezing.
Sloping surface
Unstable Bumpy
surface
Two or more people are required to move the washing machine.
• The ventilation openings in the base of the washing machine must not be obstructed by carpet
• Start by tilting the washing machine backwards.
• One person should stand behind it, holding the rear of the top panel. The other person should grip
the bottom feet at the front.
• Check that you have all the required accessories for installation.
• We recommend that you entrust the installation of the washing machine to a qualified technician.
An additional space (approximately 120mm) is required at the rear of the washing machine.
This is to allow enough space for the water hose and drain hose connections.
INSTALLATION
6
Moving and Installing
Removing the Transit Bolts
Four transit bolts keep the interior of the washing machine in place while it’s being moved.
They need to be removed before installation. Use a spanner (not supplied) and follow the instructions detailed below.
Moving the Washing Machine from One Location to Another
Before you move the washing machine:
• Shut off the tap and run the washing machine to drain the water. Drain any remaining water from the pump hose.
• Disconnect the mains cable.
• Attach the transit bolts.
To remove the transit bolts:
1. Use a spanner to loosen the four bolts. They are located at the rear of the washing machine.
2. Pull the bolts out horizontally. Make sure the entire bolt is removed.
3. Push the four cover caps (included with your accessories) into the respective bolt holes.
Don’t run the washing machine without removing the transit bolts, as this can cause
excessive vibrations and may damage your machine.
You’ll need the transit bolts again if you move the washing machine, so make sure you keep
them in a safe place.
1 2 3
Make sure to fix the transit bolts prior to moving the washing machine.
* All images are for indication only; please refer to your individual unit for actual item.
INSTALLATION
7
Off
Cold
Cold
Cold
30
How to connect from the left side
~80cm
~90cm
~85cm ~135cm
min. 60cm
max. 100cm
~40cm
~130cm
How to connect from the right side
Levelling the Washing Machine
There are 4 levelling feet on the underside. They must be adjusted to make sure the washing machine is level.
1. On each foot, loosen the lock ring by turning it clockwise.
2. Adjust all four feet by rotating each upwards or downwards.
3. Use a spirit level to ensure the washing machine is level.
4. Tighten each lock ring by turning them anti-clockwise (towards the washing machine body).
Ensure all four lock rings are tightened securely. Check the feet are still bolted to the washing machine - if they’re unbolted, the washing machine will move around.
Water Supply Hose
Points to remember
• Follow the instructions in this section to avoid water leaks.
• Don’t connect the hose to a combination tap.
• Don’t twist, squash, modify or cut the hose.
• This machine is designed to connect to the cold water supply. Do not connect to the hot water
supply.
• Use only the new water supply hose supplied. Old hose sets should not be reused.
Hose and Cable Lengths
Plastic Nut
Foot
* All images are for indication only; please refer to your individual unit for actual item.
INSTALLATION
8
Connecting the Water Supply Hose
1. To prevent leakage from the connection joints, ensure the rubber washer seals are fitted to each end of the water supply hose. Do not use without the seals in place.
2. Fit the straight end of the water supply hose to the cold water tap.
3. Connect the angled end of the white headed hose to the water inlet valve on the machine. Hand tighten the plastic parts of the connections. If you are unsure, please call a qualified plumber for safer connections.
4. Open the tap slowly and check that there are no leaks around the connection joints.
3/4”
min. 10 mm
3/4”
min. 10 mm
Plastic joint
U-Shape Holder
Draining to a wash-basin Draining to a drain hose
Water Drain Hose
Points to remember:
• Don’t twist, pull out or bend the drain hose.
• Your washing machine should be no more than 85cm from the drain outlet.
• The water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from
the ground.
Draining to a sink or wash-basin
• Secure the drain hose in position, so it can’t drop out of the basin.
• Don’t block the basin’s drain outlet, and make sure that the drainage through it is sufficient to
prevent overflowing.
• Don’t let the tip of the drain hose dip into the drained water, as this can cause the water to flow back into the washing machine.
Cold water inlet (White lter valve)
* All images are for indication only; please refer to your individual unit for actual item.
INSTALLATION
9
Connecting to the Mains Supply
For your safety:
• Do not use a mains plug adapter or extension cable.
• If the mains cable or mains plug are damaged, stop using them and call a qualified technician for
assistance.
• An Earthed plug has been attached to the power cable of your washing machine. This plug must be inserted into an earthed socket capable of supplying 13 Amps. If you have no such sockets and fuses in your house, call a qualified electrician.
• The mains plug must remain accessible to allow disconnection or an all pole switch must be incorporated in the fixed wiring in accordance with the wiring rules.
Installation Check List
By now, you should have installed the washing machine. Let’s go through the checklist to ensure that the installation has been done correctly!
Questions Checkbox
Transit bolts - Have you removed them and attached the cover caps properly?
4 levelling feet Four Adjustable Feet - Are they bolted securely to the washing
machine?
Four Feet Cushions - Are they standing flat?
Power supply - Is the household dedicated mains socket rated for 220V - 240V AC and can supply 13 Amps?
Location - Is your washing machine on a flat, stable surface?
Water Supply Hose - Is it free from leaks and is the water supply normal?
INSTALLATION
10
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use