Logik L323CD11, L323ED11, L423CD11, L473CD11 Instruction Manual

Download

32" 3D Ready LCD TV

Instruction Manual L323CD11

L323CD11_IB_111011_Zell.indd 1 11/10/2011 9:14 PM

L323CD11_IB_111011_Zell.indd 2 11/10/2011 9:14 PM

Contents

Preparation .........................................................................................................................................................................................5

Unpacking the TV ...............................................................................................................................................................................................................5

Installing / Removing the Base Stand .........................................................................................................................................................................6

Front / Right Side View and Controls ...........................................................................................................................................................................7

Rear View and Sockets ......................................................................................................................................................................................................8

Installing Batteries in the Remote Control ................................................................................................................................................................9

Remote Control Operation Range ................................................................................................................................................................................9

Remote Control .................................................................................................................................................................................................................10

Connections ......................................................................................................................................................................................12

Making Video and Audio Connections .....................................................................................................................................................................12

Connecting an AV Device with an HDMI Cable .....................................................................................................................................................12

Connecting a Computer with a VGA Cable .............................................................................................................................................................13

Connecting an AV Device with a Component (YPbPr) Cable ...........................................................................................................................13

Connecting an AV Device with a SCART Cable ......................................................................................................................................................14

Connecting an AV Device with Composite Cable .................................................................................................................................................14

Connecting a Digital Audio Receiver ........................................................................................................................................................................15

Connecting an Audio Receiver ....................................................................................................................................................................................15

Connecting Headphones ...............................................................................................................................................................................................16

Initial Setup ......................................................................................................................................................................................17

Turning the TV on for the First Time ..........................................................................................................................................................................17

− Target Region Descriptor ...................................................................................................................................................................................18

− Selecting the Input Source................................................................................................................................................................................19

− Channel Selection ...............................................................................................................................................................................................19

− Display Channel Information ...........................................................................................................................................................................19

− Volume Adjustment .............................................................................................................................................................................................19

Customising TV Settings .................................................................................................................................................................20

Channel Setting (TV, DTV or Radio Mode) .............................................................................................................................................................. 20

− Auto Tuning (ATV / DTV mode)....................................................................................................................................................................... 20

− ATV Manual Tuning (ATV mode) .....................................................................................................................................................................21

− DTV Manual Tuning (DTV mode) ....................................................................................................................................................................21

− Channel Edit (ATV Mode) ..................................................................................................................................................................................22

− Channel Edit (DTV Mode) ..................................................................................................................................................................................23

− Signal Information (DTV Mode) ...................................................................................................................................................................... 23

− CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 24

− Software Update (USB) ...................................................................................................................................................................................... 25

Picture Setting .................................................................................................................................................................................................................. 26

Sound Setting ................................................................................................................................................................................................................... 27

− Stereo / Dual Sound Reception (ATV Mode) .............................................................................................................................................. 28

− Speaker Sound Output Selection (DTV Mode) ......................................................................................................................................... 29

Time Setting ...................................................................................................................................................................................................................... 29

Option Setting .................................................................................................................................................................................................................. 30

− OSD Language ......................................................................................................................................................................................................30

− TT Language ...........................................................................................................................................................................................................31

− Audio Language (DTV Mode) .......................................................................................................................................................................... 32

− Subtitle Language (DTV Mode) ......................................................................................................................................................................32

− Hearing Impaired ................................................................................................................................................................................................. 33

− PVR File System (DTV Mode) ............................................................................................................................................................................ 33

− Aspect Ratio ........................................................................................................................................................................................................... 35

− Blue Screen ............................................................................................................................................................................................................36

− Restore Factory Default ..................................................................................................................................................................................... 36

Lock Setting ....................................................................................................................................................................................................................... 37

− Lock System ........................................................................................................................................................................................................... 37

− Set Password ......................................................................................................................................................................................................... 37

− Block Channel .......................................................................................................................................................................................................38

− Parental Guidance ............................................................................................................................................................................................... 39

− Key Lock .................................................................................................................................................................................................................. 40

L323CD11_IB_111011_Zell.indd 3 11/10/2011 9:14 PM

Using the Features ...........................................................................................................................................................................41

EPG (Electronic Programme Guide) (DTV Mode) ..................................................................................................................................................41

− Switch On / O EPG ..............................................................................................................................................................................................41

− Select a Programme ............................................................................................................................................................................................41

Teletext (ATV Mode) ........................................................................................................................................................................................................ 42

− To Turn on Teletext Function........................................................................................................................................................................... 42

Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 42

− Teletext within Digital Service ........................................................................................................................................................................ 42

Entertainment ..................................................................................................................................................................................43

3D Imaging ......................................................................................................................................................................................................................... 43

− 3D Technology ...................................................................................................................................................................................................... 43

− 3D Imaging Viewing Range .............................................................................................................................................................................44

− Watching 3D TV .................................................................................................................................................................................................... 44

− 3D Options ............................................................................................................................................................................................................. 44

− 3D Customised Setting ...................................................................................................................................................................................... 44

Connecting a USB Storage Device ............................................................................................................................................................................. 45

Viewing Photos ................................................................................................................................................................................................................. 46

Listening to Music ............................................................................................................................................................................................................ 46

Watching Movies .............................................................................................................................................................................................................. 47

Viewing Texts ....................................................................................................................................................................................................................48

PVR (Personal Video Recorder) .......................................................................................................................................................49

Time Shift Function (DTV Mode) ................................................................................................................................................................................ 49

Recording DTV Programme onto a USB Storage Device .................................................................................................................................. 50

Timer Programming ....................................................................................................................................................................................................... 50

Play Recorded Programme ...........................................................................................................................................................................................51

Maintenance .....................................................................................................................................................................................53

Display Modes ..................................................................................................................................................................................55

YPbPr Mode ....................................................................................................................................................................................................................... 55

PC Mode ..............................................................................................................................................................................................................................55

HDMI Mode .......................................................................................................................................................................................................................55

Specifications ...................................................................................................................................................................................56

Safety Warnings ...............................................................................................................................................................................58

L323CD11_IB_111011_Zell.indd 4 11/10/2011 9:14 PM

Preparation

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Screws x 5

(P.N.: 119020013)

Mains Cable

(P.N.: 117010062)

3D Glasses x 5

(P.N.: 118050098)

Remote Control / AAA Batteries x 2

(P.N.: 118020377 & 118030017)

Instruction Manual

(P.N.: 120010001-L323CD11)

Quick Start Guide

(P.N.: 120010161-L323CD11)

Digital TV Switchcover Addendum

(P.N.: 120010193)

Thank you for purchasing your new Logik 32" 3D Ready LCD TV.

Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

Preparation

Base Stand

(P.N.: 101030575)

L323CD11_IB_111011_Zell.indd 5 11/10/2011 9:14 PM

Preparation

5. Mounting on the wall. This TV is designed to be wallmounted with a standard 400 mm x 200 mm mounting kit designed for flat-panel TVs (sold separately). Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to pages 12-16 and page 45 for details) before mounting on to the wall.

3. To install the base stand first make sure you position the front of the base stand at the front of the TV. Slide the base stand to the TV and then use the 5 screws to fix the base stand to the TV.

4. To remove the stand assembly, lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. Untighten the 5 screws that hold the stand assembly to the rear of the TV. Slide the base stand out.

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface with the back side

facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.

Installing / Removing the Base Stand

• In order to get the best 3D effect from your wall mounted 3D TV, we strongly recommend that you use a tilting wall mount bracket. This will enable you to angle the TV direct at your favourite viewing position.

• Please read this instruction manual carefully while setting up your TV.

• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK

Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

Keep all the spare screws should you want

to use the base stand option.

The screw holes will only align if the front of

the base stand is at the front of the TV.

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be

sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with

it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

Remove the stand assembly before mounting the TV onto the wall.

screw

unscrew

Screws x 5

(P.N.: 119020013)

Screw A x 5

(P.N.: 119020013)

400 mm

200 mm

Four mounting holes

(size M4 screw)

L323CD11_IB_111011_Zell.indd 6 11/10/2011 9:14 PM

Preparation

Front / Right Side View and Controls

Item Description

1 IR (Infrared Receiver)

Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected.

2 POWER LED

Illuminates green when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will alternate between red and green when the timer programming has started in the standby mode.

3 TV/AV

Press to select among different input signal sources: DTV / ATV / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB. Confirmed the selection on OSD menu.

4 MENU Displays the OSD (on screen display) menu.

5 CH + / – Press to select a channel or select a sub-menu from the OSD menu.

6 VOL + / –

Adjusts the volume. Press to select and adjust a setting in the OSD menu.

7 STANDBY

Switches the TV on from standby mode. Switches the TV back to standby mode.

INPUTMENU CH+ CH- VOL+ VOL- POWR

TV/AV MENU CH+ CH- VOL+ VOL- STANDBY

1 2

L323CD11_IB_111011_Zell.indd 7 11/10/2011 9:14 PM

Preparation

Rear View and Sockets

Socket Description

1 AUDIO OUT (L/R)

To connect to a DVD player, Digital Set-Top-Box, or other AV devices with audio input sockets.

2 USB

Allows the insertion of a USB storage device to play video, audio, photo and text files (USB mode) and record DTV programmes on to a USB storage device.

3 HDMI1 / 2 / 3

To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver.

4 PC Audio In / VGA To connect to a computer or other devices with a VGA interface.

5 Common Interface Slot Allows the insertion of a Common Access Module. (Refer to page 24 for details)

6 SCART To connect to a VCR, DVD Player, or other AV device with a SCART output socket.

7 Digital Audio Out To connect to the audio socket on the digital/standard 5.1 audio system.

8 VIDEO / AUDIO (L/R)

To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.

9 YPbPr / AUDIO (L/R)

To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets.

10 Aerial To connect to the aerial socket on the wall with the RF coaxial cable.

Headphone Out

To connect to the headphones.

12 AC POWER IN Connects the mains cable to the mains socket.

13 POWER SWITCH Switch on the POWER ON/OFF switch to turn the TV to standby mode.

HDMI1 HDMI2 HDMI3 VGA PC audio SCART

Digit al

Audio out AV R in L in Aeria l

AC PO WER I N POWER SWIT CH

Y Pr Pb

Commo n Int erfac e

USB

Headp hone out

L R

Audio out

1 2 6 7 8 10 11 12 13

5 9

3 4

L323CD11_IB_111011_Zell.indd 8 11/10/2011 9:14 PM

Preparation

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. The operating distance may vary depending on the brightness of the room.

Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the

remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.

• Only use the battery type indicated in this manual.

• When the batteries are exhausted, the remote will

not function. Replace both batteries at the same time with new ones.

• Do not install new batteries with used ones and do not mix different types of batteries.

• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.

Handling the Remote Control

• Take care of your fingernails when you press and hold the battery release tab.

• Do not drop or cause impact to the remote control.

• Do not spill water or any liquid on the remote

control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct

sunlight or near sources of excessive heat.

• Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.

30° 30°

L323CD11_IB_111011_Zell.indd 9 11/10/2011 9:14 PM

Preparation

Mutes and restores your TV sound.

Switches the TV between on and standby mode.

3. Source

Select among the dierent input signal sources: DTV / ATV / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.

4. Menu

Display the OSD (On Screen Display) menu.

5. Help

Display the Help menu.

6. 3D

• Select among the dierent 3D options: Side by Side / Top Bottom / Frame Packing / Line by Line / 3D

O

• Normal 2D images as a simulated 3D eect (2D to 3D).

7. TV

A short-cut to switch input source to TV / Digital radio channels. (DTV mode)

Eject a disc. (DVD mode)

• To start the timeshift playback. (DTV mode)

• To start playback or pause. (USB / DVD mode)

10.

To stop the playback or recording. (USB / DVD mode)

11.

Record the current programme. (DTV mode)

12.

To reverse / advance playback rapidly. (DVD / USB mode)

13.

To skip to the beginning of the previous or next chapter / track / photo. (DVD / USB mode)

14. USB1 / USB2

Display the Recorded List on USB1 / USB2. (DTV mode)

15. A / B

Display the Schedule List on USB1 / USB2. (DTV mode)

16. Coloured buttons

Access the TELETEXT items or channel edit when using Digital / Freeview TV Channels. (ATV / DTV mode)

17.

Exit

Exit the OSD menu.

18.

Info

• Display the present channel information such as the current time and channel name. (ATV / DTV mode)

• Display the present disc information. (DVD mode)

Remote Control

Please note that the DVD mode functions on the remote control only operate on TV models with a built-in DVD player.

L323CD11_IB_111011_Zell.indd 10 11/10/2011 9:14 PM

Preparation

19.

Allows you to navigate the OSD menus and adjust the system settings to your preference.

• Conrm the selection in the OSD menus.

• Display channel list. (ATV / DTV mode)

20. P

• Press the P button once and then press the buttons to select picture mode: Dynamic / Standard / Mild / Personal.

• Press the P button twice and then press the buttons to allow you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Dot to Dot / Subtitle. (Dot to Dot only operates in YPBPR / HDMI mode)

21. S

• Press the S button once and then press the buttons to select sound mode: Standard / Music / Movie / Sports / Personal.

• Press the S button twice and then press the buttons to select speaker sound output. (DTV mode)

• Press the S button twice and then press the buttons to select Mono to Nicam Stereo. (ATV mode)

22. GUIDE

Displays the EPG (Electronic Programme Guide). (DTV mode)

23. VOL + / –

Adjusts the volume.

24. CH + / –

Select a channel.

25.

Return to the previous viewing channel. (AT V / DTV mode)

26. 0-9 Number Button

• Press to select a programme. (ATV / DTV mode)

• Select numbered items in a menu. (DVD mode)

27. SUB

• Selects subtitles which are broadcast with the programme. (DTV mode)

• Selects subtitles on the DVD. (DVD mode)

28. TEXT

Turns on and o the teletext function. (ATV / DTV mode)

Please note that the DVD mode functions on the remote control only operate on TV models with a built-in DVD player.

L323CD11_IB_111011_Zell.indd 11 11/10/2011 9:14 PM

Connections

Connecting an AV Device with an HDMI Cable

• This TV can accept High-Definition Multimedia Interface (HDMI) and supports HDCP (High-Bandwidth Digital Content Protection) Protocol.

• The TV has a total of 3 HDMI input sockets, please make sure the correct input source is selected corresponding to your connected HDMI input socket.

• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p.

1. Use an HDMI cable to connect the TV’s HDMI1 / HDMI2 / HDMI3 input socket to the external AV device’s HDMI output socket.

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to

turn on your TV.

4. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select HDMI1 or HDMI2 or HDMI3 and then press the OK button to confirm.

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.

Signal Type

Separate Audio

Connection Required

HDM I

HDMI (480i/480p/576i/576p/720p/1080i/1080p)

Yes

Component Video (480i/480p/576i/576p/720p/1080i/1080p)

Yes

SCART (RGB Input) No

Composite Video

Yes

Best Video Performance

Connections

Although this TV is able to connect to an HDMI device, it is possible that some devices may not operate correctly.

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aerial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

HDMI Cable (not included)

L323CD11_IB_111011_Zell.indd 12 11/10/2011 9:14 PM

Connections

Connecting an AV Device with a Component (YPbPr) Cable

1. Use a component cable to connect the TV’s YPbPr

input sockets to an external AV device’s component output sockets.

2. Use an AV cable to connect the TV’s AUDIO(L/R) input sockets to the external AV device’s component audio output sockets. (Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on DVD player

Y Pb Pr

Y Cb Cr

3. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

4. Press the STANDBY button at the front right side of the TV or the

button on the remote

control to turn on your TV.

5. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select YPbPr and then press

the OK button to confirm.

Connecting a Computer with a VGA Cable

1. Use a VGA cable to connect the TV’s PC input

socket to a computer’s VGA output socket. Use an audio cable to connect the TV’s PC AUDIO input socket to the computer’s audio output socket.

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select

PC and then press the OK button to confirm.

• The best resolution is 1440 x 900.

• If your computer is set to shut down after a

few minutes of idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the STANDBY button at the right side of the TV when viewed from the front or the

button

on the remote control to restart the TV.

Rear View of TV

VGA Cable

(not included)

Audio Cable (not included)

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Computer

HDMI1 H DMI2 H DMI3 VGA PC audi o SCAR T

Digital

Audio ou t AV R in L in Aeri al

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Rear View of TV

COMPONENT

OUT

Satellite Receiver

Video Camera

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

Component Cable

(not included)

Pb/Cb

Pr/Cr

AV Cable (not included)

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

Red (R)

White (L)

L323CD11_IB_111011_Zell.indd 13 11/10/2011 9:14 PM

Connections

Connecting an AV Device with Composite Cable

1. Use an AV cable to connect the TV’s AUDIO(L/R)/

VIDEO input sockets to an external AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select

AV and then press the OK button to confirm.

Connecting an AV Device with a SCART Cable

1. Use a SCART cable to connect the TV’s SCART input

socket to an external AV device’s SCART output socket.

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to turn

on your TV.

4. The TV will change the input source to SCART automatically once the AV device is switched on.

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

SCART Cable (not included)

Satellite Receiver

VCR

DVD Player / Recorder

Set-top Box

Satellite Receiver

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Video Camera

VCR

DVD Player / Recorder

Set-top Box

Game Console

AV Cable (not included)

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

Red (R)

White (L)

L323CD11_IB_111011_Zell.indd 14 11/10/2011 9:14 PM

Connections

Connecting an Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TV’s AUDIO(L/R) input sockets to the external audio device’s audio output sockets. (Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select any desired input source and then press the OK button to confirm.

Connecting a Digital Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TV’s Digital Audio out socket to an external audio receiver’s audio coaxial input socket.

2. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

3. Press the STANDBY button at the front right side of the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the

buttons to select any desired input source and then press the OK button to confirm.

The TV’s volume control will have no effect. You may control the audio level via the Audio Receiver.

Audio Receiver

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Rear View of TV

Audio Receiver

White (L)

Red (R)

Audio Cable (not included)

Red (R)

White (L)

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Audio Cable (not included)

L323CD11_IB_111011_Zell.indd 15 11/10/2011 9:14 PM

Connections

Connecting Headphones

Connect your headphones to the TV’s socket.

Before putting on headphones, turn the volume down then put the headphones on and slowly increase the volume until you reach a comfortable listening level.

Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using earphones,

especially for extended periods.

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Earphones Cable

(not included)

L323CD11_IB_111011_Zell.indd 16 11/10/2011 9:14 PM

Initial Setup

Do not connect the TV to the mains supply

until you have completed all the connections.

2. Connect the mains cable to the AC Power In located at the rear of the TV and then connect to the mains socket after you have completed all the connections.

3. Switch on the POWER SWITCH which is located at the rear of the TV. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.

4. In standby mode, press the STANDBY button on the TV or the

button on the remote control to turn the TV on. The LED indicator will change from red to green.

Turning the TV on for the First Time

1. Connect one end of the RF coaxial cable to the aerial

socket on the wall and the other end of the cable to the Aerial socket at the rear bottom of your TV.

5. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press

the OK button. (If you have already installed the TV using the Quick Start Guide, please go to “Selecting the Input Source” section on the next page.)

Please ensure aerial is plugged in!!

Then press OK button to start

• Always disconnect the TV from the mains socket when not in use for a long period of time.

• The STANDBY button at the front right side of the TV or the

button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains cable from the mains socket.

Initial Setup

The STANDBY button is located on the front

right side of the TV.

OFF

HDMI1 HDMI2 HDM I3 VGA PC audio SCART

Digital

Audio out AV R in L in Aerial

AC POWER IN POWER SWITC H

Y Pr Pb

Common Inte rface

USB

Headphone o ut

L R

Audio out

HDMI1 H DMI2 HDMI3 VGA PC au dio SC ART

Digital

Audio out AV R in L in Aerial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common In terfa ce

USB

Headphone out

L R

Audio out

RF coaxial cable (not included)

L323CD11_IB_111011_Zell.indd 17 11/10/2011 9:14 PM

Initial Setup

7. Channel tuning will commence. This operation may take up to 10 minutes. The display will show the progress of the tuning and the number of channels found.

8. If you want to skip the ATV tuning, press the Menu button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

9. After tuning is complete, the channels are arranged in the broadcaster's preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the Channel menu (refer to pages 22-23 for details).

Target Region Descriptor

During tuning your TV may have received signals from more than one transmitter. If this has occurred the Target Region Descriptor screen will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.

Press the

buttons to adjust each option's setting and then press the OK

button to confirm.

Country Code This will be shown as GBR for the UK.

Primary Region

This will show the regional country (England, Wales, Scotland, NI).

Secondary Region

This will allow you to set the region for your local news service on BBC and ITV (London, Beds and Cambs etc).

Tertiary Region

You may receive signals from more than one transmitter within the Secondary Region, (e.g Beds and Cambs may have Luton or Sandy Heath).

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

Target Region Setting

Country Code GBR

Primary Region England

Secondary Region

Tertiary Region

London

6. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm.

OSD Language Select your desired language to be displayed on

the menu. The default on-screen menu language is set as English.

Country Select the country where you will operate the TV.

The default country is set as UK.

Please select an OSD Language

Deutsch

Español Français

Português Italiano

English

Country

France

Germany Portugal

Italy Spain

L323CD11_IB_111011_Zell.indd 18 11/10/2011 9:14 PM

Initial Setup

Selecting the Input Source

1. Press the TV/AV button at the front right side of the TV or the Source button

on the remote control to display the Input source list.

2. Press the

buttons to select the input source that you want: DTV / ATV /

AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.

3. Press the OK button to confirm your selection. If you do not press the OK button to confirm, the TV will automatically confirm the selected input source within 4 seconds.

In DTV mode, press the TV button to switch to TV / digital radio channels directly.

Input Source

DTV

ATV

YPBPR

HDMI2

SCART

HDMI1

HDMI3

USB

Channel Selection

• Press the CH+ / – buttons at the front right side of the TV or on the remote control repeatedly or the 0-9 buttons on the remote control to select the channel.

Alternative

Press the OK button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.

• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 38 for details on Block Channel).

• Press the

button to return to the previously viewed channel.

Display Channel Information

• Press the Info button to view the current information.

Volume Adjustment

• Press the VOL+ or – button at the front right side of the TV or on the remote control to adjust the volume.

• If you wish to switch the sound off, press the

button. Press the button again or the VOL+ or – button to resume audio

listening.

L323CD11_IB_111011_Zell.indd 19 11/10/2011 9:14 PM

Customising TV Settings

4. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.

5. If you want to skip the ATV tuning, press the Menu button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

6. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to pages 22-23 for details).

3. In the Tune Type menu, press the

buttons to select ATV / DTV /

DTV + ATV. Press the

button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

2. Press the

buttons to select Auto Tuning and then press the OK

button.

Channel Setting (TV, DTV or Radio Mode)

Auto Tuning (ATV / DTV mode)

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Tune Type

France

Germany

Portugal

Italy

Spain

ATV+DTV

Other

Customising TV Settings

Aut o Tun ing

ATV Manu al Tu ning

Sof tware Upda te(US B)

Cha nnel Edit

(ATV mode)

Aut o Tun ing

DTV Manu al Tu ning

Sig nal I nform ation

CI Infor matio n

Sof tware Upda te(US B) Of f

Cha nnel Edit

(DTV mode)

L323CD11_IB_111011_Zell.indd 20 11/10/2011 9:14 PM

Customising TV Settings

3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the

buttons to adjust the setting.

Current CH Displays the current channel number.

Colour System

Selects the colour system: Auto / SECAM / PAL.

Sound System Selects the sound system: DK / I / BG.

Fine-Tune

Press the

buttons to make manual fine

tuning adjustments.

AFC (Auto Frequency Control)

Select AFC On to lock the desired frequency.

Press the

buttons to start the manual

tuning.

4. After finishing the manual tuning adjustment of a channel, press the Menu button to save your channel before tuning the next channel.

5. Press the

Exit button to exit the menu.

DTV Manual Tuning (DTV mode)

Allows you to make manual fine tuning adjustments of the channel under DTV mode.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

2. Press the

buttons to select ATV Manual Tuning and then press the

OK button.

ATV Manual Tuning (ATV mode)

Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Aut o Tun ing

ATV Manu al Tu ning

Sof tware Upda te(US B)

Cha nnel Edit

ATV Manual Tuning

DTV : 0 Programme

Colour System PAL

Sound System I

Current CH 1

Fine - Tune 470.25 MHz

AFC Off

L323CD11_IB_111011_Zell.indd 21 11/10/2011 9:14 PM

Customising TV Settings

3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.

a. Delete

Press the RED button to delete the selected channel.

b. Rename

Press the GREEN button to rename the selected channel. Press

the

buttons to select the characters to represent the station

name. Press the

buttons to move to the next character and

then press the OK button to confirm the new name.

c. Move

Press the YELLOW button and then press the

buttons to

move to the selected channel. Press the YELLOW button or the

OK button to conrm.

Channel Edit (ATV Mode)

Allows you to edit TV programmes in the Channel List.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

3. The DTV Manual Tuning screen will pop up. Press the

buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

4. Press the Menu button to return back to the main menu.

5. Press the

Exit button to exit the menu.

2. Press the

buttons to select DTV Manual Tuning and then press the

OK button.

Channel Edit

1 S-07

2 S-08

3 S-09

4 S-10

5 S-04

ATV

Delete

Rename

Skip

Move

2. Press the buttons to select Channel Edit and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Aut o Tun ing

ATV Manu al Tu ning

Sof tware Upda te(US B)

Cha nnel Edit

Aut o Tun ing

DTV Manu al Tu ning

Sig nal I nform ation

CI Infor matio n

Sof tware Upda te(US B)

Cha nnel Edit

DTV : 0 Programme

UHF CH 21

DTV Manual Tuning

Press OK to search

Bad

Freq: 474.00 MHz Good

L323CD11_IB_111011_Zell.indd 22 11/10/2011 9:14 PM

Customising TV Settings

3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.

a. Delete

Press the RED button to delete the selected channel.

b. Skip

Press the BLUE button to select the channels that you want to skip

when you are selecting channels. Press the BLUE button again to undo it.

4. Press the Menu button to return back to the main menu.

5. Press the

Exit button to exit the menu.

2. Press the

buttons to select Channel Edit and then press the OK

button.

d. Skip

Press the BLUE button to select the channels that you want to skip

when you are selecting channels. Press the BLUE button again to undo it.

4. Press the Menu button to return back to the main menu.

5. Press the

Exit button to exit the menu.

Channel Edit (DTV Mode)

Allows you to edit TV programmes in the Channel List.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

Channel Edit

5 Five

16 QVC

17 UK TV Gold

DTV

Delete

Skip

DTV

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Aut o Tun ing

DTV Manu al Tu ning

Sig nal I nform ation

CI Infor matio n

Sof tware Upda te(US B)

Cha nnel Edit

Signal Information (DTV Mode)

Allows you to view the signal information.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 23 11/10/2011 9:14 PM

Customising TV Settings

3. Press the Menu button to return to the previous menu.

4. Press the

Exit button to exit the menu.

2. Press the

buttons to select Signal Information and then press the

OK button to view the signal information.

This feature is not available in all countries.

To insert the Common Access Module

1. Before you insert the Common Access Module, ensure that the TV is

switched off and the viewing card is inserted in accordance with the Service Provider’s instructions.

2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module

1. Before you remove the Common Access Module, ensure that the TV is

switched off.

2. Pull the Common Access Module from the slot.

3. Switch the TV on.

To view the module information

1. Press the Menu button and then press the buttons to select the CHANNEL menu and then press the OK button.

CI (Common Interface) (DTV Mode)

The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.

Common Access Module

Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a

malfunction.

Aut o Tun ing

DTV Manu al Tu ning

Sig nal I nform ation

CI Infor matio n

Sof tware Upda te(US B)

Cha nnel Edit

Signal Information

Channel 50

Frequency 706.00Mhz

Quality 99

Strength 91

Network Crystal Palace

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

HDMI1 HDMI2 HD MI3 VGA P C aud io SCA RT

Digital

Audio ou t AV R in L in Ae rial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

Rear View of TV

CI (Common Interface)

Allows the Common Access Module to be inserted and access the content that has been encrypted.

L323CD11_IB_111011_Zell.indd 24 11/10/2011 9:14 PM

Customising TV Settings

2. Press the buttons to select CI Information and then press the OK button.

3. A CI Information Main menu will pop up. Press the

buttons to display the module information, smart card information, language, software download. Press the OK button to confirm.

4. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Aut o Tun ing

DTV Manu al Tu ning

Sig nal I nform ation

CI Infor matio n

Sof tware Upda te(US B)

Cha nnel Edit

Conax Conditional Access Main menu

Press ‘OK’ to select; Press ‘EXIT’ to quit

CI Infor matio n

Sma rt Car d Inf ormat ion

Lan guage

Sof tware Downl oad

Mod ule In forma tion

This screen is for illustration only.

Software Update (USB)

This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website: http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

L323CD11_IB_111011_Zell.indd 25 11/10/2011 9:14 PM

Customising TV Settings

Picture Setting

Allows you to set your preferred picture mode.

1. Press the Menu button and then press the

buttons to select the

PICTURE menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select the following picture options and then press the OK button.

Picture Mode Press the buttons to cycle among picture mode: Dynamic /

Standard / Mild / Personal and then press the OK button to confirm.

Alternative

You may press the P button once and then press the buttons to select the picture mode directly.

Contrast Press the

buttons to adjust the difference between light and dark levels in the picture. (for

Personal mode)

Brightness Press the

buttons to increase or decreases the amount of white in the picture. (for Personal

mode)

Colour Press the

buttons to control the colour intensity. (for Personal mode)

Tint (For NTSC format)

Press the

buttons to adjust the balance between red and green levels.

(Tint is only available for NTSC signal input via the SCART or AV IN.)

Sharpness Press the

buttons to adjust the level of crispness in the edges between light and dark areas of

the picture. (for Personal mode)

Colour Temperature

Press the

buttons to cycle among colour temperature: Cold / Normal / Warm and then press the OK button to confirm. Adjusts the colour components independently to achieve a warm or cool. (for Personal mode)

• Cold: Increases blue tint

• Normal

• Warm: Increases red tint

Noise Reduction Press the

buttons to select to reduce the noise level of the connected device: Off / Low / Middle / High and then press the OK button to confirm.

Pict ure M ode

Dynamic

Standard

Mild

Personal

EXIT

Colo ur Te mp

Cold

Normal

Warm

EXIT

Nois e Red uctio n

Off

Low

Middle

High

EXIT

Pic ture M ode

Con trast

Bri ghtnes s

Col our

Tin t

Sha rpness

Col our Te mp

Noi se Red uctio n

Sta ndard

Nor mal

Off

3D Type

PC SETUP

Off Exc hange 3D L/ R L/R 2D to 3D Off 3D to 2D Off

L323CD11_IB_111011_Zell.indd 26 11/10/2011 9:14 PM

Customising TV Settings

PC SETUP Press the buttons to adjust the PC desktop content and then press the OK button to confirm.

(PC mode only)

Auto Adjust

Allows you to synchronise a PC signal automatically.

Aut o Adj ust

H-O ffset

V-O ffset

Siz e

Pha se

Pos ition Rese t

H-Offset Adjusts the position of the picture

left and right in the window.

V-Offset Adjusts the position of the picture up

and down in the window.

Size Allows you to adjust the picture

horizontally, in linear properties

Phase Controls the signal phase, which

can improve focus clarity and image stability based on the PC mode.

Position Reset

Press to set the best screen position.

3D Type

Press the buttons to choose a suitable 3D playback mode by matching the format of your 3D video to the available choice: Side by Side / Top Bottom / Frame Packing / Line by Line / 3D O.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

Exchange 3D Left/Right

Press the

buttons to adjust the setting for the best 3D picture visibility.

3D to 2D

Press the buttons to downscale 3D video or TV into 2D.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

2D to 3D

Press the buttons to upscale 2D video or TV into 3D.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Sound Setting

Allows you to select an audio-enhancement technique.

1. Press the Menu button and then press the

buttons to select the

SOUND menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 27 11/10/2011 9:14 PM

Customising TV Settings

Sound Mode Press the buttons to select an audio-enhancement technique: Standard /

Music / Movie / Sports / Personal and then press the OK button to confirm.

Alternative

You may press the S button to select the sound mode directly.

Treble Press the

buttons to control the relative intensity of higher pitched sounds. (for Personal mode)

Bass Press the

buttons to control the relative intensity of lower-pitched sounds. (for Personal mode)

Balance Press the

buttons to adjust the relative volume of the speakers in a multiple speaker system.

Auto Volume Press the

buttons to turn on / off the auto volume. Select On to automatically control the volume.

(e.g. advertisements tend to be louder than the programmes)

SRS TruSurround HD

SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology that has been offered for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to

6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better intelligibility of vocals, and definition control for maximum high-frequency clarity. Press the

buttons to select On / Off.

SPDIF Mode Press the

buttons to select the digital audio output mode.

AD Switch

(For DTV mode)

Audio Description is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the main audio from the broadcaster.

• Set to “Off” for normal broadcasting sound coming out from speakers.

• Set to “On” to activate the description sound track if available. The availability of Audio Description

sound track is indicated by the visually impaired icon "V.I." in the information banner.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Stereo / Dual Sound Reception (ATV Mode)

When a programme is selected, press the S button twice and then press the buttons to select Mono / Nicam Stereo for the selected station.

Broadcast On Screen Display

Mono

Stereo

MONO

NICAM STEREO

Mono sound selection

If the stereo signal is weak in stereo reception, you can switch to mono by pressing the S button twice and then press the buttons to select Mono / Nicam Stereo. In mono reception, the clarity of sound is improved. To switch back to stereo, press the S button twice and then press the

buttons to select Mono / Nicam Stereo again.

Soun d Mod e

Standard

Music

Movie

Sports

Personal

EXIT

2. Press the buttons to select the following sound options and then press the OK button.

Sou nd Mo de

Tre ble

Aut o Vol ume

SRS TruS urrou nd HD

SPD IF Mo de

AD Switc h

Bas s

Bal ance

Sta ndard

Off

Aut o

Off

L323CD11_IB_111011_Zell.indd 28 11/10/2011 9:14 PM

Customising TV Settings

Speaker Sound Output Selection (DTV Mode)

While watching a DTV programme, you can press the S button to display the audio language list (only applicable when the TV programme has this feature).

Press the

buttons to select an audio language or audio format if

available and then press the

buttons to select sound track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to confirm and exit.

Audio Language

English

MPEG

V.I.

L R

MenuMove

2. Press the buttons to select the following time options and then

press the OK button.

Time Setting

Allows you to adjust timer zone, sleep timer, auto standby, OSD timer and summer time.

1. Press the Menu button and then press the

buttons to select the

TIME menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Clo ck

Tim e Zon e

Sle ep Ti mer

Aut o Sta ndby

OSD Time r

Sum mer T ime

-- -- - - --

GMT

Off

4 H

10 S

Aut o

Clock The clock is set automatically when receiving a digital signal. (DTV mode)

Time Zone When you select a Time Zone city, the TV time is set by

the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

Press the

buttons to select the desired time zone

city and then press the OK button to confirm.

Time Zone

Lisbon GMT Amsterdam GMT+1

Rabat GMT

Beograd GMT+1

Brussels GMT+1

Berlin GMT+1

Budapest GMT+1

Canary GMT

London GMT

Move

L323CD11_IB_111011_Zell.indd 29 11/10/2011 9:14 PM

Customising TV Settings

Sleep Timer The sleep timer automatically switches the TV to standby

after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function.

Press the

buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / … / 180 / 240 min and then press the OK button to confirm. The timer begins to count down from the number of minutes selected.

Slee p Tim er

Off

10min

20min

30min

60min

90min

EXIT

Auto Standby The unit will automatically switch to standby mode 4 hours

after the last time the remote control was used. A reminder screen will pop up and count down before the unit switches to standby mode. If you want to operate the TV for a long period of time, turn off the auto standby function. Press the Menu button to display the main menu. Press the

buttons to select the Time option and then press the OK button. Press the buttons to select the Auto Standby option and then press the OK button to select "Off". Press the

Exit button to exit the main menu. To save energy you should always turn the auto standby function back to "4H".

the unit will automatically switch to standby mode in 4 Min 26 Sec. Press the OK button to continue viewing.

Auto Stan dby

Off

3 H

4 H

5 H

EXIT

OSD Timer Press the buttons to select the display time of the

on-screen menu: 5s / 10s / 15s / 20s / 25s / 30s and then press the OK button to confirm.

OSD Timer

5 S

10 S

15 S

20 S

25 S

30 S

EXIT

Summer Timer Press the OK button repeatedly to select OFF / ON / Auto.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

If you turn the TV off after setting the sleep timer,

the sleep timer setting will be erased.

Option Setting

OSD Language

Allows you to select your desired on screen menu language.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 30 11/10/2011 9:14 PM

Customising TV Settings

2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is set as English.

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

3. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm and return to the previous menu.

4. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

OSD Language

Deutsch

Español Français

Português Italiano

English

TT Language

Allows you to select your preferred Teletext language.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select TT Language and then press the OK button.

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

3. Press the buttons to select your desired TT Language. Press the OK button to confirm and return to the previous menu.

4. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

TT La ng uage

West

East

Russi an

Arabic

Farsi

EXIT

L323CD11_IB_111011_Zell.indd 31 11/10/2011 9:14 PM

Customising TV Settings

2. Press the buttons to select Audio Language and then press the OK button.

Audio Language (DTV Mode)

Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.)

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

3. Press the buttons to select the Primary / Secondary Audio Language. Press the

button and then press the buttons to select your desired audio language. Press the OK button to confirm and return to the previous menu.

4. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Audio language

Dansk

English

Hrvatski

Česky

Ελληνικά

Français

ItalianoDeutsch

Español

Primary

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Subtitle Language (DTV Mode)

Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.)

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

2. Press the

buttons to select Subtitle Language and then press the

OK button.

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

L323CD11_IB_111011_Zell.indd 32 11/10/2011 9:14 PM

Customising TV Settings

3. Press the buttons to select the Primary / Secondary Subtitle Language. Press the

button and then press the buttons to select your desired subtitle language. Press the OK button to confirm and return to the previous menu.

4. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Subtitle language

Dansk

English

Hrvatski

Česky

Ελληνικά

Français

ItalianoDeutsch

Español

Primary

While watching a DTV programme, you can press the

SUB button on the remote control to display the Subtitle Language List and then press the

buttons to select the

Subtitle Language. Press the OK button to confirm. (Only

applicable when the TV programme has this feature)

2. Press the buttons to select Hearing Impaired and then press the OK button to select On / Off and return to the previous menu.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Hearing Impaired

Allows you to show more information in subtitles for the hearing-impaired in some programmes (for DTV channels only if available).

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

PVR File System (DTV Mode)

Allows you to select your preferences in the PVR File System.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 33 11/10/2011 9:14 PM

Customising TV Settings

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

2. Press the buttons to select PVR File System and then press the OK button.

Select Disk Select the disk where you want to store your recorded content.

Check PVR File System

Press the OK button, the system will now check your USB device's suitability for PVR. The system will show "Checking". Upon the completion the system will show either "SUCCESS" or "FAIL".

USB Disk If no USB storage device is connected, it will show "No USB Device". If the Check PVR File System

has a "SUCCESS" it will show "Pass".

Format Press the OK button, a File System Size menu will pop-up. Press the

buttons to select your

preferred file type between FAT32 and Hi Speed FS. If you select Hi Speed FS, press the

button

and then press the

buttons to select your preferred file size. Press the OK button to confirm and

then press the

button to start formatting. This may take awhile depending on the size of your USB

storage device.

Warn ing! All d ata wil l be lost .

Sta rt Exit

For mat dis k

File System Size

PVR File System Type

PVR File System Size

SD 107 Mins

FAT32

All

Do not u nplug U SB devi ce.

Form attin g,ple ase wai t

Form at disk

Time Shift Size After formatting the Time Shift Size menu will appear if you have

selected Hi Speed FS in PVR File System Type. Press the

buttons to select your preferred file size. Press the OK button to confirm. This option cannot be chosen if you have selected FAT32 in PVR File

System Type.

Speed This shows you the transfer rate of your USB storage device.

Free Record Limit Press the

buttons to set the recording time limit from 1-4 hours.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

Start

4 Hr.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

SUCCESS

Pass

0 MB

1792 KB/s

4 Hr.

Time Shift Size

Time Shift Disk Size

SD 112 Mins

4GB

L323CD11_IB_111011_Zell.indd 34 11/10/2011 9:14 PM

Customising TV Settings

Aspect Ratio

Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Subtitle / Dot to Dot.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

2. Press the buttons to select Aspect Ratio and then press the OK

button.

3. Press the

buttons to change the following settings and then press

the OK button to confirm to return to previous menu.

Alternative

You may press the P button twice and then press the buttons to select the aspect ratio directly.

Input Signal 4:3 Input Signal 16:9

Auto This selection will display

the picture according to the aspect ratio of the input source.

This selection will display the picture according to the aspect ratio of the input source.

4:3 This selection will allow you to

view a picture with an original 4:3 aspect ratio. Black bars will appear on both the left and right of the screen.

This selection will allow you to adjust the picture horizontally, in linear proportion. Black bars will appear on both the left and right of the screen.

16:9 This selection will allow you to

adjust the picture horizontally, in linear proportion, to fill the entire screen.

This selection will allow you to view a picture with an original 16:9 aspect ratio.

Zoom This selection will allow you to

zoom in the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

This selection will allow you to zoom in the picture without any alteration, while the 4 sides of the picture will be cropped.

Smart Zoom This selection is similar to 16:9

mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.

This selection is similar to 16:9 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.

Dot by Dot

(HDMI & YPBPR mode only)

This selection will detect the resolution of the HDMI signal and display an image with the same number of pixels.

Subtitle This selection will allow you to

zoom in the picture without any alternation, while filling the entire screen with subtitles shown at the bottom of the screen.

This selection will allow you to zoom in the picture without any alternation, while showing subtitles at the bottom of the screen.

4. Press the Menu button to return to the previous menu. Press the Exit button to exit the menu.

Hea ring Impai red

Asp ect R atio

Blu e Scr een Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 35 11/10/2011 9:14 PM

Customising TV Settings

Blue Screen

Allows the blue background to turn On or Off during weak or no signal conditions.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Restore Factory Default and then press the OK button.

2. Press the

buttons to select Blue Screen and then press the OK

button to select On / Off.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Hea ring Impai red

Asp ect R atio

Blu e Scr een

Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

3. Press the button to select “Yes”. The TV will return to the first time installation menu. Press the

button to select "No" to cancel and return to the main menu.

Are you sure?

Yes No

All channel and user settings will be lost and the TV will revert to "First Time Installation".

Hea ring Impai red

Asp ect R atio

Blu e Scr een

Res tore Facto ry De fault

OSD Lang uage

Aud io La nguag e

TT Langu age

PVR File Syst em

Sub title Lang uage

Off

Aut o

Eng lish

Wes t

Eng lish

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Restore Factory Default

Restores all settings to the factory defaults.

1. Press the Menu button and then press the

buttons to select the

OPTION menu and then press the OK button.

L323CD11_IB_111011_Zell.indd 36 11/10/2011 9:14 PM

Customising TV Settings

4. Press the buttons to select Lock System and then the OK buttons to select On / Off. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / First Time Installation / Restore Factory Default.

5. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Set Password

1. Press the Menu button and then press the buttons to select the LOCK menu and then press the OK button.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

2. Press the

buttons to select Lock System and then press the OK

button.

Lock Setting

To access the LOCK menu, you must enter the password. Enter the default password “0000” for first time use. To change the password, please refer to page 37 "Set Password”.

Lock System

The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes.

The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Restore Factory Default.

1. Press the Menu button and then press the

buttons to select the

LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Off

Off

Please enter password

• The default password is “0000”.

• If you change the password, be sure to remember the

new password! If you forget the new password, press the

master password“4711”.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L323CD11_IB_111011_Zell.indd 37 11/10/2011 9:14 PM

Customising TV Settings

Block Channel

Block Channel is designed to prevent children watching unsuitable programmes.

1. Press the Menu button and then press the

buttons to select the

LOCK menu and then press the OK button.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

2. Press the

buttons to select Lock System and then press the OK

button.

3. Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.

Confirm new password

Please enter new password

Please enter old password

2. Press the buttons to select Set Password and then press the OK button.

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Off

Off

• The default password is “0000”.

• If you change the password, be sure to remember the

new password! If you forget the new password, press the master password“4711”.

4. Press the Menu button to return to the previous menu. Press the Exit button to exit the menu.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Of f

Off

Please enter password

• The default password is “0000”.

• If you change the password, be sure to remember the

new password! If you forget the new password, press the master password“4711”.

L323CD11_IB_111011_Zell.indd 38 11/10/2011 9:14 PM

Customising TV Settings

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu and then press the OK button to turn the Lock System On.

2. Press the

buttons to select Lock System and then press the OK

button.

Parental Guidance

This function allows you to set up blocking schemes to block specific programmes and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate.

This TV is programmed to remember which option it was last set to even if you switch the TV off.

1. Press the Menu button and then press the

buttons to select the

LOCK menu and then press the OK button.

5. A Block Channel screen will pop up. Press the

buttons to select a channel. Press the GREEN button on the remote control to lock or unlock the channel. Press the GREEN button again to unblock.

6. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

4. Press the

buttons to select Block Channel and then press the OK

button.

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Of f

Off

Block Channel

1 S-07

2 S-08

ATV

Lock/Unlock

When a channel is blocked, a valid password must be entered.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Of f

Off

Please enter password

• The default password is “0000”.

• If you change the password, be sure to remember the

new password! If you forget the new password, press the

master password“4711”.

L323CD11_IB_111011_Zell.indd 39 11/10/2011 9:14 PM

Customising TV Settings

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu and then press the OK button to turn the Lock System On.

2. Press the

buttons to select Lock System and then press the OK

button.

5. Press the

buttons to select an age rating: Off, 4-18. Then press the OK

button to confirm to return to the previous menu.

6. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

4. Press the

buttons to select Parental Guidance and then press the

OK button.

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Of f

Off

Par ental Guid ance

Off

EXIT

When a programme is rated above the selected age rating,

the programme will be blocked, a valid password must be

entered.

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Off

Off

Key Lock

Key Locked is designed to prevent children from pressing the buttons on the TV. The Lock System must be set to On for this function to operate. If the Key Locked is set to On, all buttons on the TV will be locked. All TV operations can be controlled by the remote control only.

1. Press the Menu button and then press the

buttons to select the

LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Loc k Sys tem

Set Pass word

Blo ck Ch annel

Par ental Guid ance

Off

Key Lock Of f

Off

Please enter password

• The default password is “0000”.

• If you change the password, be sure to remember the

new password! If you forget the new password, press the master password“4711”.

4. Press the buttons to select Key Lock and then press the OK button to select On / Off.

5. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

L323CD11_IB_111011_Zell.indd 40 11/10/2011 9:14 PM

Using the Features

EPG (Electronic Programme Guide) (DTV Mode)

This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options.

The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).

This function can be used only when the EPG information is broadcast by broadcasting companies.

The EPG displays the programme details for the next 7 days.

Switch On / Off EPG

1. Press the GUIDE button to switch on EPG.

2. Press the GUIDE button or the

Exit button again to switch off EPG and return to normal TV viewing.

10:00 11:00

Pinky and perky Frankenstei.. No information

2 BBC TWO My Fair Lady

7 BBC THREE This is BBC THREE

70 CBBC Channel Bear Behaving Badly Shaun the .. No information

80 BBC NEWS BBC News Our World: Stormchaser

105 BBC Red Button BBC Red Button

PROGRAMME GUDIE 1 BBC ONE

25 Dec 2008 10:06 10:00-10:15 Pinky and Perky

25 Dec

1 BBC ONE

DTV

current date and time

current programme title

current channel name

programme date programme time

programme information

channel no. and

channel name

Select a Programme

Press the buttons to select the desired channel and then press the buttons to select the desired programme. Press the

OK button to confirm.

Button Functions in a 7 Days Guide

Remote Control Button Function

RED (Record)

• Timer Programming See page 50 for details on Timer Programming.

• Press the RED button in the Schedule List to delete the selected preset reminder.

GREEN (Schedule)

Press the GREEN button to view the preset reminders or scheduled recordings in the

Schedule List.

YELLOW (Date)

Press to highlight the current date. Press the

buttons to select the date and then press the

YELLOW button again to confirm.

BLUE (Remind)

Press the BLUE button while on the selected programme, the Reminder setting menu will be displayed. Press the

buttons to adjust the settings and then press the OK button to confirm the settings. After confirmation, the Schedule list will then be displayed with your preset reminders shown. Press the GREEN button to return to the EPG. The TV will automatically tune to the selected programme when it starts.

Info Press to display detailed information of the selected programme (if available).

Press to select a channel.

Press to view the schedule of the previous / next day.

OK Press to confirm and view the selected channel.

Exit Press to switch off the EPG.

Sche dule L ist 15 :30 10 th Ma r Delet e

Time Da te

Prog ramme Title

Chan nel Na me

Back

802 S ZTVM0 3

08 Mi nute

05 Ho ur

Apr M ont h

28 Da te

Onc e Mode

Remin der set tin g

BAC K

L323CD11_IB_111011_Zell.indd 41 11/10/2011 9:14 PM

Using the Features

Digital Teletext (DTV Mode)

Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 32 for details).

Teletext within Digital Service

1. Press the TEXT button to display the teletext page. If no Teletext service is

available, a "No Teletext" message will be displayed.

2. Press the 0-9 buttons to select a page number.

3. Follow the instructions on digital teletext and move onto the next step by

pressing OK,

, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.

4. To change digital teletext service, select a different service by pressing the 0-9 buttons or the

buttons.

Alternative

You may press the RED button to the TEXT button to display the teletext information when you see a red logo displayed on the screen (e.g. BBC).

5. Press the TEXT button to exit.

Teletext (ATV Mode)

Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.

To Turn on Teletext Function

Make sure the TV channel you are watching transmits teletext. “No Teletext” sign will show on the screen if teletext is not available.

In ATV mode, press the TEXT button to enter Teletext mode.

Press the TEXT button three times to exit and the TV will return to the channel you were watching.

To select a page of text

Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the

button.

To move to the previous page, press the

button.

Mix

To view a page of text while watching a TV programme, press the TEXT button twice. The text will be superimposed over the TV programme.

Fasttext

At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.

L323CD11_IB_111011_Zell.indd 42 11/10/2011 9:14 PM

Entertainment

3D Imaging

3D Technology

This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such as a Blu-ray 3D Player. You need such a device to watch the TV in 3D. The 3D TV displays two separate pictures formatted for each eye. The viewer needs to wear 3D glasses in order to see these images in 3D format.

• When watching 3D images, you should maintain a distance of at least twice the screen width, and you should also be able to see all of the screen at eye level.

• If you watch the 3D imaging too closely or for a long period of time, it may harm your eyesight.

• Watching the TV or playing video games that incorporate 3D imaging with the 3D glasses for a long period of time

can cause drowsiness, headaches or fatigue to you and/or your eyes. If you have a headache, or otherwise feel fatigued or drowsy, stop watching the TV and take a rest.

• Pregnant women, seniors, persons with heart problems or persons who experience frequent drowsiness should refrain from watching 3D TV.

• Some 3D imaging may cause you to duck or dodge the image displayed in the video. Therefore, it is best if you do not watch 3D TV near fragile objects or near any objects that can be knocked over easily.

• Please prevent children under the age of 5 from watching 3D TV. It may affect their vision development.

• Warning for photosensitization seizure: Some viewers may experience a seizure or epilepsy when exposed to certain

factors, including flashing lights or images in TV or video games. If you or anybody from your family has a history of epilepsy or seizure, please consult with your doctor before watching 3D TV.

• Also certain symptoms can occur in unspecified conditions without any previous history. If you experience any of the following symptoms, immediately stop watching the 3D imaging and consult a doctor: dizziness or lightheadedness, visual transition or altered vision, visual or facial instability, such as eye or muscle twitching, unconscious action, convulsion, loss of conscience, confusion or disorientation, loss of directional sense, cramps, or nausea. Parents should monitor their children, including teenagers, for these symptoms as they may be more sensitive to the effects of watching 3D TV.

• Risk of photosensitization seizure can be reduced with the following actions.

– Take frequent breaks from watching 3D TV. – For those who have vision that is different in each eye, they should watch the TV after taking vision correction

measures.

– Watch the TV so that your eyes are on the same level as the 3D screen and refrain from sitting too closely to the

TV. – Do not watch the 3D imaging when tired or sick, and avoid watching the 3D imaging for a long period of time. – Do not wear the 3D glasses for any other purpose than viewing 3D imaging on a 3D TV. – Some viewers may feel disoriented after watching 3D TV. Therefore, after you watch 3D TV, take a moment to

regain awareness of your situation before moving.

• Additional 3D glasses are sold separately.

• Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.

• Do not store the 3D glasses in hot or cold locations.

• Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.

• Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth. Shake off any dust

before using the cloth since the glasses are easily scratched.

Entertainment

• To watch the TV in 3D, you must put on your 3D glasses. Do not move around while wearing the 3D Glasses as they may alter your sense of sight, balance and distance, leading to possible physical injury or property damage.

• After watching 3D TV, remove the 3D glasses and be aware of possible disorientation due to the change of balance and distance before moving around.

• After powering on the TV, a few seconds may be needed for your TV to calibrate.

• It may take a moment for you to see the 3D imaging if you look away from the TV and then revert your eyes back to the 3D

programme.

• If there is an obstacle between the TV and the 3D glasses, the 3D imaging may not display properly.

• Do not use the TV in close proximity to other electronic equipments and RF equipments.

• When watching 2D images, it is recommended to take off the 3D glasses. If you watch 2D images with the 3D glasses on, you

may see distorted images.

L323CD11_IB_111011_Zell.indd 43 11/10/2011 9:14 PM

Entertainment

3D Imaging Viewing Range

TV size, viewing angle & other circumstances may change the viewing distance and the angle of view.

Watching 3D TV

1. Start a 3D video playback from a Blu-ray disc, USB multimedia playback or 3D TV broadcasting, or turn on the 2D to 3D

function.

2. Put on compatible 3D glasses.

3. Press the 3D button to turn on 3D mode. The default 3D Type is Side by Side. Adjust the 3D Type setting if necessary to match the 3D video format. If the 3D picture layers look reversed or otherwise incorrect, adjust the Exchange 3D L/R setting in Picture setting.

4. Press the 3D button again to close the 3D Setup Menu.

3D Options

This TV has the facility to display the 3D image as normal 2D, or to display normal 2D images as a simulated 3D effect.

3D to 2D Press the 3D button on the remote control repeatedly until Off appears on the screen.

2D to 3D Press the 3D button on the remote control to switch 2D to 3D on or off.

3D Customised Setting

1. Press the Menu button and then press the buttons to select the PICTURE menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Top View

150 - 200 cm

35°

150 - 200 cm

10°

Side View

L323CD11_IB_111011_Zell.indd 44 11/10/2011 9:14 PM

Entertainment

2. Press the buttons to select the following picture options and then press the OK button.

Pic ture M ode

Con trast

Bri ghtnes s

Col our

Tin t

Sha rpness

Col our Te mp

Noi se Red uctio n

Sta ndard

Nor mal

Off

3D Type

PC SETUP

Off Exc hange 3D L/ R L/R 2D to 3D Off 3D to 2D Off

3D Type Press the buttons to choose a suitable 3D playback mode by matching the format of your 3D

video to the available choice: Side by Side / Top Bottom / Frame Packing / Line by Line / 3D O.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

Exchange 3D Left/Right

Press the

buttons to adjust the setting for the best 3D picture visibility.

3D to 2D

Press the buttons to downscale 3D video or TV into 2D.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

2D to 3D

Press the buttons to upscale 2D video or TV into 3D.

Alternative

Whilst in viewing mode, press the 3D button repeatedly to select this function.

3. Press the Menu button to return to the previous menu. Press the

Exit

button to exit the menu.

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB

storage device.

2. Connect your USB storage device to the USB port of your TV.

3. Plug the connected devices into the mains socket before switching on the POWER SWITCH which is located at the rear of the TV.

4. Press the STANDBY button at the front right side of the TV or the

button on the remote control

to turn on your TV.

5. Press the TV/AV button at the front right side of the TV or the Source button on the remote control to display the Source List. Use the buttons to select USB and then press the OK button to confirm.

• If a hard disk is used, make sure its mains adapter is connected to the mains supply.

• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption

may exceed 500mA.

• The maximum supported storage space of the hard disk is 1 TB.

• The file system only supports HiSpeed FS, FAT16, FAT32, NTFS formats (NTFS Compressed files are not supported).

• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not

be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

• Disconnect the USB storage device if it is not in use.

Rear View of TV

HDMI1 H DMI2 HDMI3 VGA PC audio SCART

Digital

Audio ou t AV R in L in Aer ial

AC POWER IN POWE R SWI TCH

Y Pr Pb

Common I nterf ace

USB

Headphon e out

L R

Audio ou t

USB Cable (not included)

Adapter

Portable hard Disk

USB Hub

USB

L323CD11_IB_111011_Zell.indd 45 11/10/2011 9:14 PM

Entertainment

3. Press the buttons to select your storage device and then press the OK button.

Viewing Photos

1. Press the TV/AV button at the front right side of the TV or the Source

button on the remote control and then press the

buttons to select

the USB mode and then press the OK button to display the root menu.

2. Press the

buttons to select PHOTO and then press the OK button.

PHOTO

5. Press the Info button or the OK button to display the function bar. Press the

buttons and then press the OK button to select the function: Play / Prev. / Next / Stop / Repeat All / Music / Playlist / Info / Rotate clockwise / Rotate anti-clockwise / Zoom In / Zoom Out / Move View.

Listening to Music

1. Press the TV/AV button at the front right side of the TV or the Source

button on the remote control and then press the

buttons to select the USB mode and then press the OK button to display the functions bar.

2. Press the

buttons to select MUSIC and then press the OK button.

If this folder also contains music files. You can select a music track to play at the same time while viewing your photo.

6. Press the Exit button to return back to the previous menu and to select another file to play. Press the

Exit button repeatedly to return

to the root menu.

4. Press the

buttons to navigate in the picture folder and then press the OK button. Select the picture file and then press the OK button to view. If you need to delete the file, press the RED button and then press the

button to confirm.

File format supported: JPG / JPEG / BMP / PNG.

L323CD11_IB_111011_Zell.indd 46 11/10/2011 9:14 PM

Entertainment

3. Press the buttons to select your storage device and then press the OK button.

4. Press the buttons to navigate in the music folder and then press

the OK button. Select the music you want to play and then press the OK button to play it. If you need to delete the file, press the RED button and then press the

button to confirm.

4. Press the buttons to navigate in the movie folder. Select the

movie file and then press the OK button to view. If you need to delete the file, press the RED button and then press the

button to confirm.

3. Press the

buttons to select your storage device and then press the

OK button.

Watching Movies

1. Press the TV/AV button at the front right side of the TV or the Source

button on the remote control and then press the

buttons to select

the USB mode and then press the OK button to display the root menu.

2. Press the

buttons to select MOVIE and then press the OK button.

5. Select the music you want to play, it will show the music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size).

6. Press the

buttons and then press the OK button to select the function: Pause / FB / FF / Prev / Next / Stop / Repeat All / Playlist / Goto Time.

7. Press the

Exit button to return back to the previous menu and to

select another file to play. Press the

Exit button repeatedly to return

to the root menu.

• Some audio file formats will not be supported.

• Supported file formats: MP3 / WMA / AAC / AC3.

• Some audio file formats will not be supported.

• Supported file formats: MPEG1/2 / MPEG4 / DivX / H.264.

L323CD11_IB_111011_Zell.indd 47 11/10/2011 9:14 PM

Entertainment

5. Press the Info button or the OK button to display the function bar. Press the

buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat All / Set A / Playlist / Info / Aspect Ratio.

6. Press the

Exit button to return back to the previous menu and to

select another file to play. Press the

Exit button repeatedly to return

to the root menu.

6. Press the Exit button to return back to the previous menu and to select another file to play. Press the

Exit button repeatedly to return

to the root menu.

file and then press the OK button to view. If you need to delete the file, press the RED button and then press the

button to confirm.

5. Press the

Info button or the OK button to display the function bar.

Press the

buttons and then press the OK button to select the function: Prev. page / Next page / Prev. / Next / Stop / Music / Playlist / Info.

OK button.

4. Press the

buttons to navigate in the text folder. Select the text

If this folder also contains music files. You can select a music track to play at the same time while viewing your text.

Viewing Texts

1. Press the TV/AV button at the front right side of the TV or the Source

button on the remote control and then press the

buttons to select

the USB mode and then press the OK button to display the root menu.

2. Press the

buttons to select TEXT and then press the OK button.

3. Press the

buttons to select your storage device and then press the

L323CD11_IB_111011_Zell.indd 48 11/10/2011 9:14 PM

PVR (Personal Video Recorder)

Time Shift Function (DTV Mode)

This function allows the TV to virtually record the live viewing broadcast programme.

Using the Remote Control

You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 15 seconds. Press the OK button to display the PVR Time Shift progress bar again.

• During playback, press the button to display a still screen and then press the button again to resume playback.

• During fast forward / fast backward state, press the

button to return to normal playback.

When playing,

• Press the

button repeatedly to speed up x 2 / x 4 / x 8 / x 16.

• Press the

button repeatedly to speed up x 2 / x 4 / x 8 / x 16.

• During fast forward / fast backward state, press the

button to return to normal playback.

• Press the button to jump about 10% forward.

• Press the

button to jump about 10% back.

OK During playback, press the OK button to display a still screen and then press the

button again to

resume playback.

If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the

button and then press the button to confirm.

• Time Shift Mode and Recording functions may not work if the signal strength is weak.

• Stop the time-shift function before switching to another input source.

PVR (Personal Video Recorder)

The ‘PVR Time Shift Progress Bar’

1 Indicates the status of the currently

displayed video (

/ / / )

2 Indicates the time lagging behind

the live broadcast (DVR reviewing)

3 Indicates the available recording

time on your USB storage device

4 Indicates the current time

3 4

If the transfer rate of the USB storage device is too slow for recording or time shift function, a warning statement will be shown on the screen. If this happens, please

upgrade your USB storage device.

During normal TV viewing, you may press the button to virtually pause the live viewing broadcast programme if you want to go out for a while (e.g. going to the bathroom / kitchen). "

" will show on the screen.

Alternative

Press the OK button to display the PVR Time Shift progress bar and then press the buttons to select " Play" on the bar. Press the OK button to confirm.

When you have returned, press the

button to play the missed broadcast programme. " " will show on the screen.

There may be a few seconds delay in video and sound when the unit starts to playback the missed broadcast programme. It will return to normal.

L323CD11_IB_111011_Zell.indd 49 11/10/2011 9:14 PM

PVR (Personal Video Recorder)

Recording DTV Programme onto a USB Storage Device

Use this function to record the DTV programme you are watching on the main screen and save them for future viewing.

Make sure that your connected USB storage device has enough available memory space.

1. Press the

button to record the programme that you are currently

watching.

Recording will stop automatically when the disk is full.

2. Press the button or the RED button on the remote control while on the selected programme, the RECORDER menu will be displayed. Press the

buttons to select the settings in the RECORDER menu for the Channel,

Start time, End time and Mode.

Start time

(for Mode Once, Every Day, Weekly)

Press the buttons to select the Minutes / Hour / Month / Date and then press the buttons to adjust the start time.

End time

(for Mode Once, Every Day, Weekly)

Press the

buttons to select the Minutes / Hour / Month / Date and then press the buttons to adjust the end time.

Mode Press the

buttons to select the Once / Every

Day / Weekly.

Timer Programming

This function is used to perform scheduled recording.

1. Press the GUIDE button on the remote control. The EPG menu will appear.

10:00 11:00

Pinky and perky Frankenstei.. No information

2 BBC TWO My Fair Lady

7 BBC THREE This is BBC THREE

70 CBBC Channel Bear Behaving Badly Shaun the .. No information

80 BBC NEWS BBC News Our World: Stormchaser

105 BBC Red Button BBC Red Button

PROGRAMME GUDIE 1 BBC ONE

25 Dec 2008 10:06 10:00-10:15 Pinky and Perky

25 Dec

1 BBC ONE

DTV

Back

RECORDER

1 BBC ONE

Start Time

10 Hour

25 Date

00 Minute

Dec Month

End Time

15 Minute

10 Hour

Dec Month

25 Date

Mode Once

The recording progress bar will disappear after 15 seconds.

To display the recording progress bar again, press the OK

button or the

button.

2. Press the Stop button to stop recording.

If you want to turn off your TV during recording, press the button. A dialogue will be displayed.

Press the

buttons to select your desired option and then press the OK button to confirm.

If you select the middle option in the box, the screen will turn off but the recording will still continue, and the LED

indicator will alternatively flash red and blue.

The recording is still inprogress. Do you want to switch off the TV?

Yes, Stop recording and

switch off the TV

Yes, turn off the screen

and sound but keep

recording the programme

L323CD11_IB_111011_Zell.indd 50 11/10/2011 9:14 PM

PVR (Personal Video Recorder)

4. The Schedule List will then be displayed with your preset reminders shown.

5. Press the GREEN button to return to the EPG.

6. Press the

Exit button to exit EPG.

• When the preset time is reached, the TV will start recording automatically.

• If a programme recording starts when the TV is in standby mode, the LED indicator will alternately flash red and green.

3. After finishing all the recorder adjustments, press the OK button to confirm your settings. A Timer Save Success screen will display.

Timer Save Success

800 TVE 1

11 Mar 2008 10:00

Sche dule L ist 15 :30 10t h Mar Delet e

Time Date

Progr amme T itle

Chann el Nam e

Back

4. Press the buttons to select the "MY PVR" folder and then press the OK button. Press the

buttons to navigate in the "MY PVR" folder.

Select your recorded programme and then press the OK button to view.

3. Press the

buttons to select your storage device and then press the OK

button.

Play Recorded Programme

You can play a recorded programme from the recorded programme list or from a USB Storage Device.

1. Press the TV/AV button at the front right side of the TV or the Source button on the remote control and then press the

buttons to select the USB

mode and then press the OK button.

2. Press the

buttons to select MOVIE and then press the OK button.

L323CD11_IB_111011_Zell.indd 51 11/10/2011 9:14 PM

PVR (Personal Video Recorder)

5. Press the Info button or the OK button to display the function bar.

6. Press the

buttons and then press the OK button to select the function:

Pause / FB / FF / Prev. / Next / Stop / Repeat All / Set A / Playlist / Info.

7. Press the

Exit button or the button to stop the current playback and to

return back to the previous menu.

L323CD11_IB_111011_Zell.indd 52 11/10/2011 9:14 PM

Maintenance, Hints and Tips, Specication

1. Use a soft dry cloth to wipe away the dust from the screen and surfaces.

2. If the surfaces are extremely dirty, clean the TV with a cloth which has been

dipped in a weak soapy water. Wring the cloth until it is almost dry, then use it to wipe the TV.

3. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on.

Maintenance

Careful and regular cleaning can prolong the life of your TV.

Be sure to press the STANDBY button at the front right side of the TV when

viewed from the front or the

button on the remote control. Disconnect

the mains cable from the mains socket before any cleaning.

Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust.

Maintenance

Hints and Tips

The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

The TV does not operate properly.

The TV does not respond when pressing any buttons

• The TV may freeze up during use. Disconnect the mains cable from the mains socket for a few minutes. Reconnect the mains cable and try to operate it again as usual.

TV cannot be switched on

• Check that the TV is connected to the mains supply and the POWER SWITCH at the rear of the TV is switched on.

• Make sure all connected AV devices are switched off before switching on your TV.

The remote control does not work

• Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV.

• Ensure that the batteries are installed with the correct polarity (+ to +, - to -).

• Install new batteries.

Power is suddenly turned off

• Check the power of the TV. The mains supply maybe interrupted.

• Check if the sleep timer is set.

• Check whether the Auto Standby is activated.

The video function does not work.

No Picture & No Sound

• Check whether the TV is switched on.

• Try another channel. The problem may be caused by the broadcaster.

Picture appears slowly after switching on

• This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.

No or poor colour or poor picture

• Adjust the settings in the PICTURE menu.

• Try another channel. The problem may be caused by the broadcaster.

• Check if the video cables are connected properly.

Horizontal / Vertical bar or picture shaking

• Check for local interference such as an electrical appliance or power tool.

Poor reception on some channels

• Station or cable channel may be experiencing problems, tune to another station.

• Station signal is weak, reposition the aerial for better reception.

• Check for sources of possible interference.

Lines or streaks in pictures • Check aerial (Change the position of the aerial.)

No pictures when connecting HDMI • Check if the input source is HDMI1 / HDMI2 / HDMI3.

Picture appears in wrong ratio • Adjust the Aspect Ratio settings in the OPTION menu.

L323CD11_IB_111011_Zell.indd 53 11/10/2011 9:14 PM

Maintenance, Hints and Tips, Specication

The audio function does not work.

Picture OK but no sound

• Press the VOL + / - buttons.

• Sound muted? Press the

button.

• Try another channel. The problem may be caused by the broadcaster.

No output from one of the speakers • Adjust the Balance settings in the SOUND menu.

Unusual sound from Inside the TV

• A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.

No sound when connecting HDMI • Check if the input source is HDMI1 / HDMI2 / HDMI3.

Audio noise • Keep the RF coaxial cable away from the other connected cables.

Password

Lost password

• Select the Set Password setting in the LOCK menu, then enter the following master password “4711”. The master password clears your previous password and allows you to enter a new password.

There is a problem in PC mode.

The signal is out of range (Invalid format)

• Adjust the resolution, horizontal frequency, or vertical frequency.

Vertical bar or stripe on background & Horizontal Noise & Incorrect position

• Use Auto configure or adjust clock, phase, or H/V position.

Screen colour is unstable or single colour

• Check the signal cable.

• Reinstall the PC video card.

FAQs (Frequently Asked Questions)

Why have I lost some / all of my channels?

• It happens sometimes, if you have a weak signal. Usually it just means you’ll need to rescan your digital box or TV. Don’t worry, it easy to do. And once you’ve done it, you should get all the Freeview channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer.

Why do I get ‘blocking’ on my digital picture?

• In most cases, blocking is caused by a reception problem – either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local aerial installer.

• Blocking can also be caused by a digital signal that is too strong. If you are still experiencing blocking and the signal is strong, consult your local aerial installer for advice.

Can I watch Freeview using a portable set-top aerial?

• Some, but only a few, homes may be able to use a set top aerial. However, for a much better reception, we strongly recommend that you use a rooftop aerial.

• If you do not have access to a rooftop aerial – for example, if you rent a flat and the aerial is the responsibility of your landlord, or if you’re using a second TV in the bedroom and don’t want the hassle and expense of using extension cables, a set – top aerial may be your only option.

What type of aerial do I need?

• If you are installing a new aerial, we recommend a wideband rooftop aerial rather than a loft aerial. Loft aerials generally receive a weaker digital signal and are more likely to get interference from other electrical devices in the home. We suggest you have an aerial survey done before getting an aerial upgrade.

• Talk to your retailer or contact your local aerial installer.

L323CD11_IB_111011_Zell.indd 54 11/10/2011 9:14 PM

Maintenance, Hints and Tips, Specication

Display Modes

The screen resolution has been optimised during production for the display modes listed below.

YPbPr Mode

Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 720 x 480

Auto / Smart Zoom / Zoom / 16:9 /

4:3 / Dot to Dot / Subtitle

480P: 720 x 480

576I: 720 x 576

576P: 720 x 576

720P: 1280 x 720

1080I: 1920 x 1080

1080P: 1920 x 1080

PC Mode

Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video.

Resolution Vertical Frequency (Hz) Aspect Ratio

640 x 480

4:3 / 16:9

800 x 600

1024 x 768

1360 x 768 60

1920 x 1080 60

HDMI Mode

Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 1440 x 480 60

Auto / Smart Zoom / Zoom / 16:9 /

4:3 / Dot to Dot / Subtitle

480P: 720 x 480 60

576I: 1440 x 576 50

576P: 720 x 576 50

720P: 1280 x 720

1080I: 1920 x 1080

1080P: 1920 x 1080

Display Modes

L323CD11_IB_111011_Zell.indd 55 11/10/2011 9:14 PM

Maintenance, Hints and Tips, Specication

Specications

Model L323CD11

Panel System 32 inch LCD Panel

Display Resolution 1920 pixels (horizontal) x 1080 pixels (vertical)

Television System PAL I / BG / DK / SECAM BG/DK

Brightness 340 cd/m

Contrast Ratio 1100:1

Power Source 100-240V~50/60Hz

Energy Efficiency Class C

Screen Size (measured diagonally) Approx. 81 cm (32 inch)

Power Consumption (In Home mode) 83W

Average Annual Energy Consumption 121kWh

Standby Power Consumption 0.4W (16W in software / EPG update mode)

Operating Temperature 0°C – 40°C

Operating Humidity 10% – 80% RH (non-condensing)

Reference Period 2010/1062 – 2011

Speaker Power 8 W + 8 W

Dimension (W x D x H) with base 794 x 245 x 565 mm

Weight (Net) 11.1 kg

Inputs / Output

SCART 1

HDMI 3

PC 1

PC AUDIO 1

YPbPr 1

Common Interface 1

AV 1

USB 1

AUDIO IN (RCA) 1 (L + R)

DIGITAL (Coaxial) 1

RF (75 Ω) 1

Earphone (3.5mm) 1

Audio Out 1 (L + R)

Features and specifications are subject to change without prior notice.

Specifications

L323CD11_IB_111011_Zell.indd 56 11/10/2011 9:14 PM

Maintenance, Hints and Tips, Specication

C C

A B C D E F G

ENERG

YIEIJA

2010/1062 - 2011

121

kWh/annum

Wa

inch

L323CD11

L323CD11_IB_111011_Zell.indd 57 11/10/2011 9:14 PM

Safety Warnings

• Read all the instructions carefully before using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

Damage

• Please inspect the unit for damage after unpacking.

• Do not continue to operate the unit if you are in any

doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit

• The unit must be placed on a flat stable surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature

• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames

• Never place any type of candle or naked flame on the top of or near the unit.

Moisture

• To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Ventilation

• To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

• Make sure that there is a gap of at least 10 cm on both sides and a gap of 20 cm at the top.

Safety

• Always disconnect the unit from the mains supply before connecting / disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

Mains Cable

• Make sure the unit or unit stand is not resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Interference

• Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Optimum viewing

• View the unit in moderate light to prevent eye strain. It is recommended to watch the unit from a distance 3-7 times that of the screen height.

LCD screen

• The LCD screen is manufactured using high-precision technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.

Screen Burn

• A characteristic of Plasma and LCD TV Panels is that displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen.

• Examples of images that you need to watch out for are as follows (this is not an all-inclusive list):

1. Black Bars: If black bars appear at the left / right or

top / bottom of the screen, it is recommended to change the format so that the picture fills the entire screen.

2. TV Channel Logos: e.g. Shopping channel logos

and pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.

3. Time Displays

4. Teletext: Do not view a stationary page for long

periods of time.

5. TV Menus

6. Pause Mode: Do not leave the screen in pause

mode for long periods of time, e.g. when watching videos.

• To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.

Safety Warnings

10 cm 10 cm

20 cm

INPUTMENUCH+ CH- VOL+VOL-POWR

10 cm

L323CD11_IB_111011_Zell.indd 58 11/10/2011 9:14 PM

Safety Warnings

Headphones

• Listening to loud sounds for prolonged periods of time may permanently damage your hearing.

• Before putting on headphones, turn the volume down then put the headphones on and slowly increase the volume until you reach a comfortable listening level.

Standby

• The

button on the remote control does not switch off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket.

Batteries

• Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous.

• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.

• Please dispose of batteries correctly by following the guidance in this manual.

Supervision

• Children should be supervised to ensure that they do not play with the unit and the remote control.

• Never let anyone especially children push anything into the holes, slots or any other openings in the case this could result in a fatal electric shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service

• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance

• Ensure to unplug the unit from the mains socket before cleaning.

• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.

L323CD11_IB_111011_Zell.indd 59 11/10/2011 9:14 PM

If you require a replacement for any of the items listed below, please quote their corresponding part numbers:

Replacement Part Part Number

Base Stand 101030575

Remote Control 118020377

AAA Batteries 118030017

3D Glasses 118050098

Mains Cable 117010062

Screw 119020013

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where you purchased the product.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

The “HD Ready” logo is a trademark of DIGITALEUROPE.

SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialogue.

TruSurround HD, SRS and the

symbol are trademarks of SRS Labs, Inc.

All trademarks are the property of their respective owners and all rights are acknowledged.

DSGRetailLtd•MaylandsAvenue•HemelHempstead

Herts•HP27TG•England

(P.N.: 120010001-L323CD11)

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit

www.partmaster.co.uk or call 0844 800 3456 (UK customers only). Calls charged at National Rate.

L323CD11_IB_111011_Zell.indd 60 11/10/2011 9:14 PM

L323CD11_IB_111011_Zell.indd 61 11/10/2011 9:14 PM

L323CD11_IB_111011_Zell.indd 62 11/10/2011 9:14 PM

L323CD11_IB_111011_Zell.indd 63 11/10/2011 9:14 PM

L323CD11_IB_111011_Zell.indd 64 11/10/2011 9:14 PM

Logik L323CD11, L323ED11, L423CD11, L473CD11 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual