Logik L32HED12, L46FE12 Instruction Manual

32” HD Ready LED TV with DVD Player
Instruction Manual L32HED12
L32HED12_IB_Running Change_120613_Annie.indd 1 12年6月13日 下午6:58
L32HED12_IB_Running Change_120613_Annie.indd 2 12年6月13日 下午6:58
Contents
Unpacking the TV ...............................................................................................................................................................................................................5
Installing / Removing the Base Stand .........................................................................................................................................................................6
Front / Right Side View and Controls ...........................................................................................................................................................................7
Rear View and Sockets ...................................................................................................................................................................................................... 8
Installing Batteries in the Remote Control ................................................................................................................................................................9
Remote Control Operation Range ................................................................................................................................................................................9
Remote Control .................................................................................................................................................................................................................10
Connections ......................................................................................................................................................................................13
Making Video and Audio Connections .....................................................................................................................................................................13
Connecting an AV Device Using an HDMI Cable...................................................................................................................................................13
Connecting a Computer Using a VGA Cable .......................................................................................................................................................... 14
Connecting an AV Device Using a Component (YPbPr) Cable ........................................................................................................................14
Connecting an AV Device Using a SCART Cable ...................................................................................................................................................15
Connecting an AV Device Using Composite Cable ..............................................................................................................................................15
Connecting a Coaxial Audio Receiver Using an Audio Cable ...........................................................................................................................16
Initial Setup ......................................................................................................................................................................................17
Turning the TV On for the First Time .........................................................................................................................................................................17
− Target Region Setting .........................................................................................................................................................................................18
− Selecting the Input Source................................................................................................................................................................................18
− Channel Selection ...............................................................................................................................................................................................19
− Display Channel Information ...........................................................................................................................................................................19
− Volume Adjustment .............................................................................................................................................................................................19
Customising TV Settings .................................................................................................................................................................20
Channel Setting (TV, DTV or Radio Mode) .............................................................................................................................................................. 20
− Auto Tuning ........................................................................................................................................................................................................... 20
− DTV Manual Tuning (DTV Mode) .....................................................................................................................................................................21
− ATV Manual Tuning (ATV Mode) ......................................................................................................................................................................21
− Channel Edit (DTV Mode) .................................................................................................................................................................................. 22
− Channel Edit (ATV Mode) .................................................................................................................................................................................. 23
− Signal Information (DTV Mode) ...................................................................................................................................................................... 24
− CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 24
− Software Update (Over Air Download) (DTV Mode) ............................................................................................................................... 25
− Software Update (USB) ...................................................................................................................................................................................... 26
Picture Setting .................................................................................................................................................................................................................. 26
Sound Setting ................................................................................................................................................................................................................... 28
− Stereo / Dual Sound Reception (ATV Mode) .............................................................................................................................................. 29
− Speaker Sound Output Selection (DTV Mode) ......................................................................................................................................... 29
Time Settings..................................................................................................................................................................................................................... 29
Option Setting ...................................................................................................................................................................................................................31
− OSD Language .......................................................................................................................................................................................................31
− TT Language ...........................................................................................................................................................................................................31
− Audio Language (DTV Mode) .......................................................................................................................................................................... 32
− Subtitle Language (DTV Mode) ...................................................................................................................................................................... 33
− Hearing Impaired ................................................................................................................................................................................................. 33
− PVR File System (DTV Mode) ............................................................................................................................................................................ 34
− Aspect Ratio ........................................................................................................................................................................................................... 35
− Blue Screen ............................................................................................................................................................................................................ 36
− Backlight ................................................................................................................................................................................................................. 36
− HDMI CEC (Consumer Electronics Control) (HDMI Mode) .................................................................................................................... 37
− Restore Factory Default ..................................................................................................................................................................................... 38
Lock Setting ....................................................................................................................................................................................................................... 38
− Lock System ........................................................................................................................................................................................................... 38
− Set Password ......................................................................................................................................................................................................... 39
− Block Channel ....................................................................................................................................................................................................... 40
− Parental Guidance ................................................................................................................................................................................................41
− Key Lock .................................................................................................................................................................................................................. 42
L32HED12_IB_Running Change_120613_Annie.indd 3 12年6月13日 下午6:58
Using the Features ...........................................................................................................................................................................43
EPG (Electronic Programme Guide) (DTV Mode) ................................................................................................................................................. 43
− Switch On / O EPG ............................................................................................................................................................................................. 43
− Select a Programme ........................................................................................................................................................................................... 43
Teletext (ATV Mode) ........................................................................................................................................................................................................44
− To Turn on Teletext Function........................................................................................................................................................................... 44
Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 45
− Teletext within Digital Service ........................................................................................................................................................................ 45
Entertainment ..................................................................................................................................................................................46
Connecting a USB Storage Device ............................................................................................................................................................................. 46
Viewing Photos ................................................................................................................................................................................................................. 46
Listening to Music ............................................................................................................................................................................................................ 47
Viewing Movies ................................................................................................................................................................................................................ 48
My Text................................................................................................................................................................................................................................. 49
PVR (Personal Video Recorder) .......................................................................................................................................................50
Time Shift Function (DTV Mode) ................................................................................................................................................................................ 50
Recording DTV Programme onto a USB Storage Device ...................................................................................................................................51
Timer Programming ....................................................................................................................................................................................................... 52
Play Recorded Programme .......................................................................................................................................................................................... 53
Using the DVD Features ...................................................................................................................................................................54
Using the Built-in DVD Player ...................................................................................................................................................................................... 54
Compatible Disc Types .................................................................................................................................................................................................. 54
− Supported Formats ............................................................................................................................................................................................. 54
− Region Code .......................................................................................................................................................................................................... 54
Basic DVD Playback Functions .................................................................................................................................................................................... 55
Playing Multimedia Discs .............................................................................................................................................................................................. 57
Using the DVD Language Setup Page...................................................................................................................................................................... 58
Using the DVD Screen Setup Page ............................................................................................................................................................................ 59
Using the DVD Audio Setup Page .............................................................................................................................................................................. 60
Using the DVD Custom Setup Page .......................................................................................................................................................................... 60
Using the DVD Exit Setup Mode Page ......................................................................................................................................................................61
Maintenance .....................................................................................................................................................................................62
Hints and Tips ...................................................................................................................................................................................63
Display Modes ..................................................................................................................................................................................65
YPbPr Mode ....................................................................................................................................................................................................................... 65
PC Mode .............................................................................................................................................................................................................................. 65
HDMI Mode ....................................................................................................................................................................................................................... 65
Specifications ...................................................................................................................................................................................66
Safety Warnings ...............................................................................................................................................................................68
L32HED12_IB_Running Change_120613_Annie.indd 4 12年6月13日 下午6:58
GB
5
Preparation
Preparation
Unpacking the TV
Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Screw A x 4
(P.N.: 100-014-4011)
Screw B x 4
(P.N.: 104-114-4031)
AV Cable
(P.N.: 617-151-1230)
Remote Control / AAA Batteries x 2
(P.N.: 845-055-00B01 & 413-100-0007)
Instruction Manual
(P.N.: 002-B55-LOGIK)
Quick Start Guide
(P.N.: 002-L38-LOGIK)
Digital TV Switchcover Addendum
(P.N.: 002-I00-LOGIK)
Thank you for purchasing your new Logik 32" HD Ready LED TV with DVD Player.
Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual so that you fully understand these features. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
Video
Video
R
R
L
L
TV with Stand Support
TV Base
(P.N.: 154-700-EA3273)
L32HED12_IB_Running Change_120613_Annie.indd 5 12年6月13日 下午6:58
GB
6
Preparation
4. To remove the stand assembly, untighten the 4 screw B holding the stand assembly to the rear of the TV. Slide the stand assembly out.
5. Mounting on the wall. This TV is designed to be wall-mounted with a standard 200 mm x 100 mm mounting kit (sold separately) designed for flat-panel TVs. Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to page 13-16 and page 46 for details) before mounting on to the wall.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or
thick piece of foam) is placed beneath the screen.
3. To install the TV stand, first attach the base stand to the TV by using screw A. Align the screw holes then secure with a screw driver (not included) using the 4 screw A provided to fix the base stand to the TV.
Installing / Removing the Base Stand
200 mm
100 mm
Four mounting holes
(size M5 screw)
The screw holes will only align if the front of the base stand is at the front of the TV.
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK
Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Keep all the spare screws should you want
to use the stand assembly option.
Remove the stand assembly before mounting the TV onto the wall.
Screw A x 4
(P.N.: 100-014-4011)
Screw B x 4
(P.N.: 104-114-4031)
TV Front Base Stand
Front
screw
unscrew
L32HED12_IB_Running Change_120613_Annie.indd 6 12年6月13日 下午6:58
GB
7
Preparation
Front / Right Side View and Controls
Item Description
1 POWER LED
Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will alternatively flash red and blue when the timer programming has started in the standby mode.
2 IR (Infrared Receiver)
Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected.
3 Disc Slot
Insert the disc with the label side facing towards the rear of the TV. (12 cm discs only. Don't insert 8 cm discs.)
4
Press to eject disc. (DVD mode)
5
Press to start playback or pause. (DVD mode)
6 VOL + / –
Adjusts the volume. Press to select and adjust a setting in the OSD menu.
7 CH + / – Press to select a channel or select a sub-menu from the OSD menu.
8 MENU Displays the OSD (on screen display) menu.
9 SOURCE
Press to select among different input signal sources: DTV / ATV / DVD / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB. Confirmed the selection on OSD menu.
10
/ I
Switches the TV on from standby mode. Switches the TV back to standby mode.
6
7
3
4
5
8
9
10
1 2
L32HED12_IB_Running Change_120613_Annie.indd 7 12年6月13日 下午6:58
GB
8
Preparation
Rear View and Sockets
Socket Description
1 POWER ON/OFF Switches on the POWER ON/OFF switch to turn the TV to standby mode.
2 HDMI1 / 2 / 3
Connects to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver.
3 SCART Connects to a VCR, DVD Player, or other AV device with a SCART output socket.
4 PC IN / PC AUDIO Connects to a computer or other devices with a VGA interface.
5 RF Connects to the aerial socket on the wall with the RF coaxial cable.
6 Y, PB, PR / AUDIO (L/R)
Connects to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets.
7 VIDEO / AUDIO (L/R)
Connects to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.
8 CI (Common Interface) Slot Allows the insertion of a Common Access Module. (Refer to page 24 for details.)
9 USB
Allows the insertion of a USB storage device to play video, audio, photo and text files (USB mode) and record DTV programmes on to a USB storage device.
10 DIGITAL AUDIO OUT (COAXIAL)
Connects to the audio socket on the digital/standard 5.1 audio system.
2 43 5
1
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
HDMI1 IN
HDMI2 IN
PC IN
6
7
8
2
9
10
L32HED12_IB_Running Change_120613_Annie.indd 8 12年6月13日 下午6:58
GB
9
Preparation
Remote Control Operation Range
Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. The operating distance may vary depending on the brightness of the room.
Installing Batteries in the Remote Control
1. Press and lift the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
30° 30°
5M
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will
not function. Replace both batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.
L32HED12_IB_Running Change_120613_Annie.indd 9 12年6月13日 下午6:59
GB
10
Preparation
1.
Switches the TV between on and standby mode.
2.
MUTE
Mutes and restores your TV sound.
3. 0-9 Number Button
• Selects a programme. (ATV / DTV mode)
• Selects numbered items in a menu. (DVD mode)
4. LIST
• Displays channel list. (ATV / DTV mode)
• Selects a track number above 10. For example, to select track
23 press twice followed by 3. (DVD mode)
5.
RECALL
Returns to the previous viewing channel. (ATV / DTV mode)
6. SLEEP
Sets the TV sleep timer: OFF / 10 / 20 / … / 180 / 240 min.
7. VOL + / –
Adjusts the volume.
8. CH + / –
Selects a channel.
9.
• Displays the present channel information such as the current time and channel name. (ATV / DTV mode)
• Displays the present disc information. (DVD mode)
10. S.MODE
Selects sound mode: Standard / Music / Movie / Sports / Personal.
11. ASPECT
Watches the screen in various formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Subtitle.
12. GUIDE
Display the EPG (Electronic Programme Guide). (DTV mode)
TITLE
Displays the DVD title content. (DVD mode)
13. P.MODE
Selects picture mode: Dynamic / Standard / Mild / Personal.
14. MENU
Displays the OSD (On Screen Display) menu.
15. INPUT
Selects among the dierent input signal sources: DTV / ATV / DVD / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.
16.
Allows you to navigate the OSD menus and adjust the system settings to your preference.
OK
Conrms the selection in the OSD menus.
17. BACK
Returns to the previous menu in the OSD menus.
18. Exit
Exits the OSD menu.
Remote Control
1
2
5
8
12
15
18
9
13
3
4
7
11
14
16
17
6
10
L32HED12_IB_Running Change_120613_Annie.indd 10 12年6月13日 下午6:59
GB
11
Preparation
19. FAV
Displays the favourite channel list. (ATV / DTV mode)
SETUP
Displays and exit the DVD setup menu. (DVD mode)
20.
Turns on / o the SRS Tru Surround HD function.
21. TV.RD
Short-cut to switch input source to TV / Digital radio channels. (DTV mode)
Ejects a disc. (DVD mode)
22. AD (Audio Description)
Turns on / o the Audio Description (AD) function (only applicable when the TV programme has this feature). (DTV mode)
23. ANGLE
Selects dierent angles for the video. (DVD mode)
24. STEP
Plays back the forward frame by frame. (DVD mode).
25. ZOOM
Zooms in on the displayed frame. (DVD mode)
26.
REC
Records the current programme. (DTV mode)
27.
• Starts the timeshift playback. (DTV mode)
• Starts playback or pause. (Media / DVD mode)
28. PROG
Programmes the DVD. (DVD mode)
29.
Stop
• Press once to stop, but keep your place in the movie. Press twice to stop completely. (DVD mode)
• Stops the playback or recording. (Media mode)
30. T.SHIFT
Starts the time-shift function. (DTV mode)
31.
TEXT
Turns on and o the teletext function. (ATV / DTV mode)
Reverses playback rapidly. (DVD / Media mode)
32.
CANCEL
Exits the teletext mode. (ATV mode)
Advances playback rapidly. (DVD / Media mode)
33. S (Subtitle)
• Selects subtitles which are broadcast with the programme. (DTV mode)
• Selects subtitles on the DVD. (DVD mode)
34.
SIZE
26
30 33 34
24
25
29
28
32
31
2220
2119
23
27
L32HED12_IB_Running Change_120613_Annie.indd 11 12年6月13日 下午6:59
GB
12
Preparation
Enlarges the picture on the TV in teletext. (ATV mode)
35.
REVEAL
Reveals hidden information such as the answer to a quiz in teletext. (ATV mode).
Skips to the beginning of the next chapter / track / photo. (DVD / Media mode)
36.
HOLD
Freezes a multi-page passage on screen in teletext. (ATV mode)
Skips to the beginning of the previous chapter / track / photo. (DVD / Media mode)
37.
SUBPAGE
Displays the subpage on the teletext screen. (ATV mode)
MENU
Displays the DVD menu. (DVD mode)
38.
INDEX
Selects the page number of the index from teletext. (ATV mode)
AUDIO
• Switches between the audio languages (only applicable when the TV programme / disc has this features). (DTV / DVD mode)
• Selects stereo / Dual Sound Reception. (ATV mode)
39. Coloured buttons
Accesses the TELETEXT items or channel edit when using Digital / Freeview TV Channels. (ATV / DTV mode)
GOTO (RED)
Skips to a specic location on a DVD / CD. (DVD mode)
SLOW (GREEN)
Plays video slow. (DVD mode)
REPEAT (YELLOW)
Selects between dierent repeat modes. (DVD mode)
A–B (BLUE)
Repeats a segment between A and B. (DVD mode)
38
37
36
39
35
L32HED12_IB_Running Change_120613_Annie.indd 12 12年6月13日 下午6:59
GB
13
Connections
Connections
Connecting an AV Device Using an HDMI Cable
• This TV can accept High-Definition Multimedia Interface (HDMI) and supports HDCP (High-Bandwidth Digital Content Protection) Protocol.
• This TV has a total of 3 HDMI input sockets, please make sure the correct input source is selected and corresponds to your connected HDMI input socket.
• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source.
• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p.
1. Use an HDMI cable (not included) to connect the TV’s HDMI input socket to the external AV device’s HDMI output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
3. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
4. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons
to select HDMI1 / HDMI2 / HDMI3 and then press the
OK button to confirm.
Making Video and Audio Connections
Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures.
When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.
Signal Type
Separate Audio
Connection Required
HDMI1, 2 & 3
HDMI (480i/480p/576i/576p/720p/1080i/1080p*)
No
PC IN
PC
Yes
Component Video (480i/480p/576i/576p/720p/1080i/1080p*)
Yes
SCART (RGB Input) No
Composite Video
Yes
Best Video Performance
Although this TV is able to connect to an HDMI device, it is possible that some devices may not operate correctly.
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
Rear Right Side View of TV
Rear Right Bottom View of TV
HDMI1 IN
HDMI2 IN
PC IN
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
HDMI Cable (not included)
*1080p: Although this TV is compatible with a 1080p input, the screen is not capable of
displaying this resolution and consequently the image will be scaled to suit the screen.
L32HED12_IB_Running Change_120613_Annie.indd 13 12年6月13日 下午6:59
GB
14
Connections
Connecting an AV Device Using a Component (YPbPr) Cable
1. Use a component cable (not included) to connect the
TV’s YPbPr input sockets to an external AV device’s component output sockets.
2. Use the supplied AV cable to connect the TV’s AUDIO(L/R) input sockets to the external AV device’s component audio output sockets. (Audio Left = white, and Audio Right = red)
Component port on the TV Y Pb Pr
Video output ports on DVD player
Y Pb Pr Y Cb Cr
3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
4. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
5. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select YPbPr and then press the OK button to confirm.
Connecting a Computer Using a VGA Cable
1. Use a VGA cable to connect the TV’s PC IN input socket to
a computer’s VGA output socket. Use an audio cable (not included) to connect the TV’s PC AUDIO input socket to the computer’s audio output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
3. Press the
/ I button on the front right side panel of the
TV or the
button on the remote control to turn on your
TV.
4. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select PC
and then press the OK button to confirm.
• The best resolution is 1360 x 768.
• If your computer is set to shut down after
a few minutes in the idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the
/I button on the front right side panel
of the TV or the
button on the remote
control to restart the TV.
Rear Right Bottom View of TV
VGA Cable (not included)
Audio Cable
(not included)
HDMI1 IN
HDMI2 IN
PC IN
Computer
Rear Right Side View of TV
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
Satellite Receiver
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
L
R
COMPONENT
OUT
Y
Pr
Pb
AV Cable
(included)
Yellow (Video)
Red (R)
White (L)
Yellow (Video)
Red (R)
White (L)
Component
Cable
(not
included)
Pb/Cb
Pr/Cr
Y
Pb/Cb
Pr/Cr
Y
L32HED12_IB_Running Change_120613_Annie.indd 14 12年6月13日 下午6:59
GB
15
Connections
Connecting an AV Device Using Composite Cable
1. Use the supplied AV cable to connect the TV’s
AUDIO(L/R)/VIDEO input sockets to an external AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
3. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
4. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons
to select AV and then press the OK button to confirm.
Connecting an AV Device Using a SCART Cable
1. Use a SCART cable (not included) to connect the TV’s
SCART input socket to an external AV device’s SCART output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
3. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
4. The TV will change the input source to SCART automatically once the AV device is switched on.
Rear Right Bottom View of TV
HDMI1 IN
HDMI2 IN
PC IN
SCART Cable (not included)
Satellite Receiver
VCR
DVD Player / Recorder
Set-top Box
Satellite Receiver
Rear Right Side View of TV
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Game Console
AV Cable (included)
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
Red (R)
White (L)
L32HED12_IB_Running Change_120613_Annie.indd 15 12年6月13日 下午6:59
GB
16
Connections
Connecting a Coaxial Audio Receiver Using an Audio Cable
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable (not included) to connect the TV’s DIGITAL AUDIO OUT (COAXIAL) output socket to an external audio receiver’s audio coaxial input socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
3. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV.
4. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select any desired input source and then press the OK button to confirm.
The TV’s volume control will have no effect. You may control the audio level via the Audio Receiver.
Rear Right Side View of TV
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
Audio Cable (not included)
Audio Receiver
L32HED12_IB_Running Change_120613_Annie.indd 16 12年6月13日 下午6:59
17
GB
Initial Setup
6. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm.
OSD Language Select your desired language to be displayed on
the menu. The default on-screen menu language is set as English.
Country Select the country where you will operate the TV.
The default country is set as UK.
Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable (not
included) to the aerial socket on the wall and the other end of the cable to the RF (75Ω) socket at the rear right bottom view of your TV.
Do not connect the TV to the mains supply until you have completed all the connections.
HDMI1 IN
HDMI2 IN
PC IN
RF coaxial cable (not included)
OR
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. Switch on the POWER ON/OFF switch which is located at the front right side under the frame. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.
4. In standby mode, press the
/ I button on the
front right side panel of the TV or the
button on the remote control to turn the TV on. The red LED indicator will turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
/ I button on the front right side panel of the TV or the button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket or switch off the POWER ON/OFF switch.
To the mains socket
5. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start Guide, please go to the section “Selecting the Input Source” on the next page.)
Please select an OSD Language
Deutsch
Español Français
Português Italiano
English
Please ensure aerial is plugged in!!
Then press OK button to start
Country
France
Germany Portugal
Italy Spain
UK
Menu
L32HED12_IB_Running Change_120613_Annie.indd 17 12年6月13日 下午6:59
18
GB
Initial Setup
Selecting the Input Source
1. Press the SOURCE button on the front right side panel of the TV
or the INPUT button on the remote control to display the Input Source list.
2. Press the
buttons to select the input source that you want: DTV / ATV / DVD / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.
3. Press the OK button to confirm your selection. If you do not press the OK button to confirm, the TV will automatically confirm the selected input source within 4 seconds.
Alternative
Press the TV.RD button to switch to TV / digital radio channels directly.
7. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.
8. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.
9. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the Channel menu (refer to page 22-23 for details).
Channel Tuning
TV : 0 Channel
DTV : 0 Channel
Radio : 0 Channel
Data : 0 Channel
1 %... 471.25 MHz (TV)
Please press MENU key to skip
Input Source
DTV
ATV
DVD
AV
YPBPR
HDMI2
SCART
HDMI1
PC
HDMI3
Move
Input Source
USB
Move
Target Region Setting
Note that if you have moved regions and your TV has received signals from more than one transmitter, the Target Region Setting will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.
Press the
buttons to adjust each option's setting and then press the OK button to confirm.
Country Code This will be shown as GBR for the UK.
Primary Region
This will show the regional country (e.g. England, Wales, Scotland, NI).
Secondary Region
This will allow you to set the region for your local news service.
Tertiary Region
You may receive signals from more than one transmitter within the Secondary Region, (e.g Beds and Cambs may have Luton or Sandy Heath).
Target Region Setting
Country Code GBR
Primary Region England
Secondary Region
Tertiary Region
London
(Provided image is for reference only. Please refer to your TV model for actual details.)
L32HED12_IB_Running Change_120613_Annie.indd 18 12年6月13日 下午6:59
19
GB
Initial Setup
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 40 for details on Block Channel).
• Press the FAV button to view the Favourite List. Then use the
buttons to highlight and select the channel. Press the OK
button to view the selected channel (refer to page 22-23 for details on Channel Edit).
• Press the
button to return to the previously viewed channel.
Display Channel Information
• Press the i button to view the current information.
Volume Adjustment
• Press the VOL + or button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
MUTE button. Press the MUTE button again or the VOL + or – button to
resume audio listening.
L32HED12_IB_Running Change_120613_Annie.indd 19 12年6月13日 下午6:59
20
GB
Customising TV Settings
4. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.
5. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.
6. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 22-23 for details).
3. In the Tune Type menu, press the
buttons to select ATV / DTV /
DTV + ATV. Press the
button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.
2. Press the
buttons to select Auto Tuning and then press the OK
button.
Channel Setting (TV, DTV or Radio Mode)
Auto Tuning
Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
Channel Tuning
TV : 0 Channel
DTV : 0 Channel
Radio : 0 Channel
Data : 0 Channel
1 %... 471.25 MHz (TV)
Please press MENU key to skip
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Tune Type
France
Germany
Portugal
Italy
Spain
UK
Menu
ATV+DTV
Other
Customising TV Settings
Auto Tuning
ATV Manual Tuning
Software Update(OAD) Off
Software Update(USB)
Channel Edit
(ATV mode)
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
(DTV mode)
L32HED12_IB_Running Change_120613_Annie.indd 20 12年6月13日 下午6:59
21
GB
Customising TV Settings
3. The DTV Manual Tuning screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.
4. Press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
2. Press the
buttons to select DTV Manual Tuning and then press the
OK button.
DTV Manual Tuning (DTV Mode)
Allows you to make manual fine tuning adjustments to the channel under DTV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
DTV : 0 Programme
UHF CH 21
DTV Manual Tuning
Press OK to search
Bad
Freq: 474.00 MHz Good
2. Press the buttons to select ATV Manual Tuning and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
ATV Manual Tuning
Software Update(OAD) Off
Software Update(USB)
Channel Edit
ATV Manual Tuning (ATV Mode)
Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
L32HED12_IB_Running Change_120613_Annie.indd 21 12年6月13日 下午6:59
22
GB
Customising TV Settings
3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the
buttons to adjust the setting.
Current CH Displays the current channel number.
Colour System
Selects the colour system: Auto / SECAM / PAL.
Sound System Selects the sound system: DK / I / BG.
Fine-Tune
Press the
buttons to make manual fine
tuning adjustments.
AFC (Auto Frequency Control)
Select AFC On to lock the desired frequency.
Search
Press the
buttons to start the manual
tuning.
4. After finishing the manual tuning adjustment of a channel, press the MENU button to save your channel before tuning the next channel.
5. Press the EXIT button to exit the menu.
Channel Edit (DTV Mode)
Allows you to edit TV channel information in the Channel List under DTV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
ATV Manual Tuning
DTV : 0 Programme
Colour System PAL
Sound System I
Current CH 1
Fine - Tune 470.25 MHz
AFC Off
Search
3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.
a. Delete Press the RED button to delete the selected channel.
b. Skip Press the BLUE button to select the channels that you want to skip
when you are selecting channels. Press the BLUE button again to undo it.
c. FAV (Favourite) Press the FAV button to set the selected channel as one of the
favourite programmes. Press the FAV button again to undo it.
4. Press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
2. Press the
buttons to select Channel Edit and then press the OK
button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
Channel Edit
5 Five
16 QVC
17 UK TV Gold
DTV
DTV
Delete
Skip
Fav
FAV
Menu
DTV
L32HED12_IB_Running Change_120613_Annie.indd 22 12年6月13日 下午6:59
23
GB
Customising TV Settings
3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.
a. Delete Press the RED button to delete the selected channel.
b. Rename Press the GREEN button to rename the selected channel. Press
the
buttons to select the characters to represent the station
name. Press the
buttons to move to the next character and
then press the OK button again to confirm the new name.
c. Move Press the YELLOW button and then press the
buttons to
move to the selected channel. Press the YELLOW button or the
OK button to conrm.
d. Skip Press the BLUE button to select the channels that you want to skip
when you are selecting channels. Press the BLUE button again to undo it.
e. FAV (Favourite) Press the FAV button to set the selected channel as one of the
favourite programmes. Press the FAV button again to undo it.
4. Press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
2. Press the
buttons to select Channel Edit and then press the OK
button.
Channel Edit (ATV Mode)
Allows you to edit TV channel information in the Channel List under ATV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
ATV Manual Tuning
Software Update(OAD) Off
Software Update(USB)
Channel Edit
Channel Edit
1 S-07
2 S-08
3 S-09
4 S-10
5 S-04
ATV
ATV
ATV
ATV
ATV
Delete
Rename
Skip
Fav
FAV
Menu
Move
L32HED12_IB_Running Change_120613_Annie.indd 23 12年6月13日 下午6:59
24
GB
Customising TV Settings
3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Signal Information (DTV Mode)
Allows you to view the signal information.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
Signal Information
Channel 50
Frequency 706.00Mhz
Quality 99
Strength 91
Network Crystal Palace
2. Press the buttons to select Signal Information and then press the OK button to view the signal information.
This feature is not available in all countries.
To insert the Common Access Module
1. Before you insert the Common Access Module, ensure that the TV is
switched off and the viewing card is inserted in accordance with the Service Provider’s instructions.
2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module, ensure that the TV is
switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
CI (Common Interface) (DTV Mode)
The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.
Rear Right Side View of TV
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
CI (Common Interface)
Allows the Common Access Module to be inserted and access the content that has been encrypted.
CI
Common Access Module
Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a
malfunction.
L32HED12_IB_Running Change_120613_Annie.indd 24 12年6月13日 下午6:59
25
GB
Customising TV Settings
3. A CI Information Main menu will pop up. Press the buttons to display the module information, smart card information, language, software download. Press the OK button to confirm.
4. Press the EXIT button to return to the previous menu. Press the EXIT button again to exit the menu.
2. Press the
buttons to select CI Information and then press the OK
button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
Conax Conditional Access Main menu
Press ‘OK’ to select; Press ‘EXIT’ to quit
CI Information
Smart Card Information
Language
Software Download
Module Information
This screen is for illustration only.
To view the module information
1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Software Update (Over Air Download) (DTV Mode)
The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
2. Press the
buttons to select Software Update(OAD) and then press
the OK button to select On.
3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Auto Tuning
DTV Manual Tuning
Signal Information
CI Information
Software Update(OAD) Off
Software Update(USB)
Channel Edit
L32HED12_IB_Running Change_120613_Annie.indd 25 12年6月13日 下午6:59
26
GB
Customising TV Settings
7. When the download is complete, the TV will automatically upgrade the software.
8. When the update is complete, the TV will return to standby mode.
9. Press the
/ I button on the front right side panel of the TV or the button
on the remote control to switch on the TV.
5. During normal DTV viewing, if the TV detects the latest firmware from the DTV signal, the Over Air Download screen will appear. Press the
buttons
to select Yes / No for upgrade procedure.
Yes
No
New Fireware is available
TV Version V0.01
Stream Version v0.02
Yes to upgrade
No to exit the upgrade
EXIT
Download
20%
Software Update(OAD)
66%
6. If you select Ye s, the over air download will start. Press the EXIT button if you want to stop the download and exit the menu.
During the download, please do not turn off or unplug your TV.
If you experience difficulties after the software update, we recommend that you restore your TV to the factory
default settings. To do this, follow the steps below:
1. Press the MENU button to go to the MAIN menu. Press the
buttons to select OPTION and then press the OK
button.
2. Press the
buttons to select Restore Factory Default and then press the OK button. Press the button to
select Ye s to reset the setting.
3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to page 17-19 for details).
Software Update (USB)
This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website: http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
2. Press the
buttons to select the following picture options and then
press the OK button.
Picture Setting
Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
buttons to select the
PICTURE menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
Standard
50
50
50
50
50
Normal
Off
SCREEN
If you do not press any button within 1 minute, the Over Air Download screen will disappear. The Over Air Download screen will appear again the next time you switch to viewing the DTV.
L32HED12_IB_Running Change_120613_Annie.indd 26 12年6月13日 下午6:59
27
GB
Customising TV Settings
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.
Picture Mode Cycles among picture mode: Standard / Mild / Personal / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode)
Brightness Increases or decreases the amount of white in the picture. (for Personal mode)
Colour Controls the colour intensity. (for Personal mode)
Tint (For NTSC
format)
Adjusts the balance between red and green levels. (Tint is only available for NTSC signal input via the SCART or AV IN.)
Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture. (for
Personal mode)
Colour Temperature
Cycles among colour temperature: Cold / Normal / Warm. Adjusts the colour components independently to achieve a warm or cool. (for Personal mode)
• Cold: Increases blue tint
• Normal
• Warm: Increases red tint
Noise Reduction Reduces the noise level of the connected device: Off / Low / Middle
/ High.
Screen
(PC mode)
Adjusts the PC desktop content.
Auto Adjust
Allows you to synchronise a PC signal automatically.
Auto Adjust
H-Offset
V-Offset
Size
Phase
Position Reset
50
50
50
50
H-Offset Adjusts the position of the picture
left and right in the window.
V-Offset Adjusts the position of the picture up
and down in the window.
Size Adjusts the picture horizontally, in
linear properties
Phase Controls the signal phase, which
can improve focus clarity and image stability based on the PC mode.
Position Reset
Press to set the best screen position.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
Picture Mode
Dynamic
Standard
Mild
Personal
BACK MENU
EXIT
Colour Temp
Cold
Normal
Warm
BACK MENU
EXIT
Noise Reduction
Off
Low
Middle
High
BACK MENU
EXIT
L32HED12_IB_Running Change_120613_Annie.indd 27 12年6月13日 下午6:59
28
GB
Customising TV Settings
2. Press the buttons to select the following sound options and then press the OK button.
Sound Setting
Allows you to select an audio-enhancement technique.
1. Press the MENU button and then press the
buttons to select the
SOUND menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Sound Mode
Treble
Auto Volume
SRS TruSurround HD
SPDIF Mode
AD Switch
Bass
Balance
Standard
50
On
On
Auto
Off
50
0
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.
Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music /
Movie / Sports / Personal.
Alternative
You may press the S.MODE button to select the sound mode directly.
Treble Controls the relative intensity of higher pitched sounds. (for Personal mode)
Bass Controls the relative intensity of lower-pitched sounds. (for Personal mode)
Balance Adjusts the relative volume of the speakers in a multiple speaker system.
Auto Volume Volume levels are automatically controlled (e.g., advertisements tend to be louder than the programmes).
SRS
SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology that has been offered for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to
6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better intelligibility of vocals, and definition control for maximum high-frequency clarity. Press the OK button to select On / Off.
Alternative
You may press the button to turn on / off the SRS function directly.
SPDIF Mode Selects the digital audio output mode.
Sound Mode
Standard
Music
Movie
Sports
Personal
BACK MENU
EXIT
L32HED12_IB_Running Change_120613_Annie.indd 28 12年6月13日 下午6:59
29
GB
Customising TV Settings
AD Switch
(For DTV mode)
Audio Description is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the main audio from the broadcaster.
• Set to “Off” for normal broadcasting sound coming out from speakers.
• Set to “On” to activate the description sound track if available. The availability of Audio Description
sound track is indicated by the visually impaired icon "V.I." in the information banner.
Alternative
You may press the AD button to turn on / off the audio description.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected, press the AUDIO button to display the sound information for the selected station.
Broadcast On Screen Display
Mono
Stereo
Dual
MONO
NICAM STEREO
DUAL I, DUAL II, DUAL I/II
Mono sound selection
If the stereo signal is weak, you can switch to mono by pressing the AUDIO button. In mono reception, the clarity of sound is improved. To switch back to stereo, press the AUDIO button again.
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II, DUAL I/II by pressing the AD button repeatedly.
DUAL I
Sends the primary broadcast language to the loudspeakers.
DUAL II
Sends the secondary broadcast language to the loudspeakers.
DUAL I/II
Sends the primary and secondary broadcast languages to the loudspeakers.
Speaker Sound Output Selection (DTV Mode)
While watching a DTV programme, you can press the AUDIO button to display the audio language list (only applicable when the TV programme has this feature). Press the
buttons to select an audio language or audio format if available and then press the buttons to select sound
track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to confirm and exit.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Time Settings
Allows you to adjust time zone, sleep time, auto standby, OSD timer and summer time.
1. Press the MENU button and then press the
buttons to select the
TIME menu and then press the OK button.
L32HED12_IB_Running Change_120613_Annie.indd 29 12年6月13日 下午6:59
30
GB
Customising TV Settings
3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.
Clock (DTV mode) The clock is set automatically when receiving a digital signal.
Time Zone
(DTV mode)
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Time Zone
Lisbon GMT Amsterdam GMT+1
Rabat GMT
Beograd GMT+1
Brussels GMT+1
Berlin GMT+1
Budapest GMT+1
Canary GMT
Menu
London GMT
Move
Sleep Timer The sleep timer automatically switches the TV to standby
after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function.
Press the
buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / … / 180 / 240 min and then press the OK button to confirm. The timer begins to count down from the number of minutes selected.
Alternative
1. You may press the SLEEP button repeatedly to
select the number of minutes: OFF / 10 / 20 / … / 180 / 240 min directly.
2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears.
Sleep Timer
Off
10min
20min
30min
60min
90min
BACK MENU
EXIT
Auto Standby The unit will automatically switch to standby mode 4 hours
after the last time the remote control was used. A reminder screen will pop up and count down before the unit switches to standby mode. If you want to operate the TV for a long period of time, turn off the auto standby function. Press the MENU button to display the main menu. Press the
buttons to select the Time option and then press the OK button. Press the buttons to select the Auto Standby option and then press the OK button to select "Off". Press the EXIT button exit the main menu. To save energy you should always turn the auto standby function back to "3H" or "4H".
the unit will automatically switch to standby mode in 4 Min 26 Sec. Press the OK button to continue viewing.
OK
Auto Standby
Off
3 H
4 H
5 H
BACK MENU
EXIT
OSD Timer Displays time of the on-screen menu: 5s / 10s / 15s / 20s /
25s / 30s and then press the OK button to confirm.
OSD Timer
5 S
10 S
15 S
20 S
25 S
30 S
BACK MENU
EXIT
If you turn the TV off after setting the sleep timer, the sleep timer setting
will be erased.
2. Press the buttons to select the following time options and then press the OK button.
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
Summer Time
-- -- -- --
GMT
Off
4 H
10 S
Auto
L32HED12_IB_Running Change_120613_Annie.indd 30 12年6月13日 下午6:59
31
GB
Customising TV Settings
Option Setting
OSD Language
Allows you to select your desired on screen menu language.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm to return to the previous menu.
4. Press the EXIT button to exit the menu.
OSD Language
Deutsch
Español Français
Português Italiano
English
2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is English.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
TT Language
Allows you to select your preferred Teletext language.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Summer Timer Press the buttons to select OFF / ON / Auto.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
L32HED12_IB_Running Change_120613_Annie.indd 31 12年6月13日 下午6:59
32
GB
Customising TV Settings
Audio Language (DTV Mode)
Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.)
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select Audio Language and then press the OK button.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
3. Press the buttons to select the Primary / Secondary Audio Language. Press the
button and then press the buttons to select your desired audio language. Press the OK button to confirm and return to the previous menu.
4. Press the EXIT button to exit the menu.
Audio language
Dansk
English
Hrvatski
Česky
Ελληνικά
Français
ItalianoDeutsch
Español
Primary
3. Press the buttons to select your desired TT Language. Press the OK button to confirm and return to the previous menu.
4. Press the EXIT button to exit the menu.
TT Language
West
East
Russian
Arabic
Farsi
BACK MENU
EXIT
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
2. Press the buttons to select TT Language and then press the OK button.
L32HED12_IB_Running Change_120613_Annie.indd 32 12年6月13日 下午6:59
33
GB
Customising TV Settings
3. Press the buttons to select the Primary / Secondary Subtitle Language. Press the
button and then press the buttons to select your desired subtitle language. Press the OK button to confirm and return to the previous menu.
4. Press the EXIT button to exit the menu.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Subtitle Language (DTV Mode)
Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.)
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
2. Press the
buttons to select Subtitle Language and then press the
OK button.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
Hearing Impaired
Shows information for the hearing-impaired in some programmes. (For DTV channels only if available.)
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Subtitle language
Dansk
English
Hrvatski
Česky
Ελληνικά
Français
ItalianoDeutsch
Español
Primary
While watching a DTV programme, you can press the S button on the remote control to display the Subtitle Language List and then press the
buttons to select the Subtitle
Language OFF. Press the OK button to confirm. (Only
applicable when the TV programme has this feature.)
2. Press the buttons to select Hearing Impaired and then press the OK button to select On / Off.
3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
L32HED12_IB_Running Change_120613_Annie.indd 33 12年6月13日 下午6:59
34
GB
Customising TV Settings
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
2. Press the buttons to select PVR File System and then press the OK button.
3. Press the
buttons to select the following PVR File System options
and then press the OK button.
Select Disk Select the disk where you want to store your recorded content.
Check PVR File System
Press the OK button, the system will now check your USB device's suitability for PVR. The system will show "Checking". Upon the completion the system will show either "SUCCESS" or "FAIL".
USB Disk If no USB storage device is connected, it will show "No USB Disk". If the Check PVR File System has a
"SUCCESS" it will show "Pass".
Format Press the OK button, a File System Size menu will pop-up. Press the
buttons to select your
preferred file type between FAT32 and HiSpeed FS. If you select HiSpeed FS, press the
button and
then press the
buttons to select your preferred file size. Press the OK button to confirm and then
press the
button to start formatting.
Warn ing! All d ata will be l ost.
Sta rt Exit
For mat dis k
For mat dis k
File System Size
PVR File System Type
PVR File System Size
SD 107 Mins
FAT32
All
Do not u nplug U SB devi ce.
Form atting, pleas e wait
Form at disk
Time Shift Size After formatting the Time Shift Size menu will appear if you have
selected HiSpeed FS in PVR File System Type. Press the
buttons to select your preferred file size. Press the OK button to confirm. This option cannot be chosen if you have selected FAT32 in PVR File
System Type.
Speed This shows you the transfer rate of your USB storage device.
Free Record Limit Press the
buttons to set the recording time limit from 1-4 hours.
Check PVR File System
USB Disk
Select Disk
Format
Time Shift Size
Speed
Free Record Limit
Start
C:
4 Hr.
Check PVR File System
USB Disk
Select Disk
Format
Time Shift Size
Speed
Free Record Limit
SUCCESS
Pass
Pass
0 MB
1792 KB/s
C:
4 Hr.
Time Shift Size
Time Shift Disk Size
SD 112 Mins
4GB
PVR File System (DTV Mode)
Allows you to select your preferences in the PVR File System.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
L32HED12_IB_Running Change_120613_Annie.indd 34 12年6月13日 下午6:59
35
GB
Customising TV Settings
Aspect Ratio
Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / Smart Zoom.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
2. Press the
buttons to select Aspect Ratio and then press the OK
button.
3. Press the
buttons to change the following settings and then press
the OK button to confirm and return to previous menu.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Input Signal 4:3 Input Signal 16:9
Auto This selection will display
the picture according to the aspect ratio of the input source.
This selection will display the picture according to the aspect ratio of the input source.
4:3 This selection will allow you to
view a picture with an original 4:3 aspect ratio. Black bars will appear on both the left and right of the screen.
This selection will allow you to adjust the picture horizontally, in linear proportion. Black bars will appear on both the left and right of the screen.
16:9 This selection will allow you to
adjust the picture horizontally, in linear proportion, to fill the entire screen.
This selection will allow you to view a picture with an original 16:9 aspect ratio.
Zoom This selection will allow you to
zoom in the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
This selection will allow you to zoom in the picture without any alteration, while the 4 sides of the picture will be cropped.
Smart Zoom This selection is similar to 16:9
mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.
This selection is similar to 16:9 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.
Subtitle This selection will allow you to
zoom in the picture without any alternation, while filling the entire screen with subtitles shown at the bottom of the screen.
This selection will allow you to zoom in the picture without any alternation, while showing subtitles at the bottom of the screen.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
L32HED12_IB_Running Change_120613_Annie.indd 35 12年6月13日 下午6:59
36
GB
Customising TV Settings
Backlight
Allows you to adjust the backlight setting of your TV. This controls the brightness and display performance of the screen.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
2. Press the
buttons to select Blue Screen and then press the OK
button to select On / Off.
3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
Blue Screen
Allows the blue background to turn On or Off during weak or no signal conditions.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
Increasing the backlight setting will increase the brightness and display performance of the screen. The higher the setting is, the higher the power consumption. You can select from 1-10 to strike a balance between the picture brightness / display performance / power consumption. Reducing the backlight setting will help you to reduce the power consumption and thus save money by
reducing electricity bills.
2. Press the buttons to select Back Light and then press the OK button. The backlight control bar will display on the screen. Press the
buttons to select your desired backlight level (1-10) of your TV.
Back Light 10
1 2 3 4 5 6 7 8 9 10
Best display performance
(Screen Brightness)
Minimum
display
performance
Good
display
performance
Best
display
performance
Recommended
display
performance
(Recommended) (Default)
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
4. Press the EXIT button to exit the menu.
L32HED12_IB_Running Change_120613_Annie.indd 36 12年6月13日 下午6:59
37
GB
Customising TV Settings
HDMI CEC (Consumer Electronics Control) (HDMI Mode)
Allows you to command and control two or more HDMI CEC compliant devices, that are connected through HDMI, by using only one of the TV remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). HDMI CEC also allows individual HDMI CEC compliant devices to command and control each other without user intervention.
Make sure that your HDMI CEC compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.)
HDMI-CEC Connection
1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.
TV
HDMI CEC compliant device
HDMI Cable
(not included)
• This unit can only communicate with HDMI-CEC compatible devices.
• To be sure that the HDMI-CEC device has this feature, check to see if there is HDMI-CEC compatible logo on it.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. The HDMI CEC sub-menu will display.
HDMI CEC
This will allow your TV to communicate with the connected HDMI CEC compliant device. Press the
buttons to select HDMI CEC
and then press the
buttons to turn On.
Device Menu
Press the
buttons to select Device Menu. Press the OK button to display the setup menu of the connected HDMI CEC compliant device. You can use the
buttons to navigate through the setup menu (some HDMI-CEC compliant devices may not support this function).
Auto Turn Off
Press the
buttons to select Auto Turn
Off and then press the
buttons to turn on. This will allow the connected HDMI compliant device to automatically turn off when you turn the TV to standby mode.
4. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
2. Press the
buttons to select HDMI CEC and then press the OK button.
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC
Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
Auto Turn Off
HDMI CEC
Device Menu
Off
Off
L32HED12_IB_Running Change_120613_Annie.indd 37 12年6月13日 下午6:59
38
GB
Customising TV Settings
2. Press the buttons to select Restore Factory Default and then press the OK button.
Restore Factory Default
Restores all settings to the factory defaults.
1. Press the MENU button and then press the
buttons to select the
OPTION menu and then press the OK button.
Lock Setting
To access the LOCK menu, you must enter the password. Enter the default password “0000” for first time use. To change the password, refer to “Change Password” (see below).
Lock System
The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes.
The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default.
1. Press the MENU button and then press the
buttons to select the
LOCK menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. Press the button to select “Yes ”. The TV will return to the first time installation menu. Press the
button to select "No" to cancel and return to the main menu.
Are you sure?
Yes No
All channel and user settings will be lost and the TV will revert to "First Time Installation".
Hearing Impaired
Aspect Ratio
Blue Screen
HDMI CEC
Restore Factory Default
OSD Language
Audio Language
TT Language
PVR File System
Subtitle Language
Off
Auto
On
Back Light 8
English
English
West
English
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
L32HED12_IB_Running Change_120613_Annie.indd 38 12年6月13日 下午6:59
39
GB
Customising TV Settings
2. Press the buttons to select Lock System and then press the OK button.
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
4. Press the buttons to select Lock System and then the OK buttons to select On / Off. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default.
5. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
6. Press the EXIT button to exit the menu.
Set Password
1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
Please enter password
The default password is “0000”.
If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.
2. Press the
buttons to select Set Password and then press the OK
button.
4. Press the
button to return to the previous menu. Press the MENU
button to return to the main menu.
5. Press the EXIT button to exit the menu.
The default password is “0000”.
If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
Confirm new password
Please enter new password
Please enter old password
L32HED12_IB_Running Change_120613_Annie.indd 39 12年6月13日 下午6:59
40
GB
Customising TV Settings
Block Channel
Block Channel is designed to prevent children watching unsuitable programmes.
When a channel is blocked, a valid password must be entered.
1. Press the MENU button and then press the
buttons to select the
LOCK menu and then press the OK button.
4. Press the
buttons to select Block Channel and then press the OK
button.
5. A Block Channel screen will pop up. Press the
buttons to select a channel. Press the GREEN button on the remote control to block or unblock the channel. Press the GREEN button again to unblock.
6. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
7. Press the EXIT button to exit the menu.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
2. Press the buttons to select Lock System and then press the OK button.
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
Please enter password
The default password is “0000”.
If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
Block Channel
1 S-07
2 S-08
ATV
ATV
Lock/Unlock
Menu
L32HED12_IB_Running Change_120613_Annie.indd 40 12年6月13日 下午6:59
41
GB
Customising TV Settings
Parental Guidance
This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This allows you to set up blocking schemes to block specific channels and ratings.
This TV is programmed to remember which option it was last set to even if you switch the TV off.
When a programme is locked or rated with delayed state, a valid password must be entered.
1. Press the MENU button and then press the
buttons to select the
LOCK menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
Please enter password
The default password is “0000”.
If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.
5. Press the buttons to select an age rating: Off, 4-18. Then press the OK button to confirm.
6. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
7. Press the EXIT button to exit the menu.
4. Press the
buttons to select Parental Guidance and then press the
OK button.
Lock System
Set Password
Block Channel
Parental Guidance
On
Key Lock Off
Off
Parental Guidance
Off
4
5
6
7
8
BACK MENU
EXIT
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
2. Press the buttons to select Lock System and then press the OK button.
L32HED12_IB_Running Change_120613_Annie.indd 41 12年6月13日 下午6:59
42
GB
Customising TV Settings
4. Press the buttons to select Key Lock and then press the OK button to select On / Off.
5. Press the BACK button to return to the previous menu or press the MENU button to return to the main menu.
6. Press the EXIT button to exit the menu.
3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.
2. Press the
buttons to select Lock System and then press the OK
button.
Please enter password
The default password is “0000”.
If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.
Lock System
Set Password
Block Channel
Parental Guidance
On
Key Lock Off
Off
Lock System
Set Password
Block Channel
Parental Guidance
Off
Key Lock Off
Off
Key Lock
Key Locked is designed to prevent children from pressing the buttons on the TV. The Lock System must be set to On for this function to operate. If the Key Locked is set to On, all buttons on the TV will be locked. All TV operations can be controlled by the remote control only.
1. Press the MENU button and then press the
buttons to select the
LOCK menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
L32HED12_IB_Running Change_120613_Annie.indd 42 12年6月13日 下午6:59
43
GB
Using the Features
EPG (Electronic Programme Guide) (DTV Mode)
This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies.
The EPG displays the programme details for the next 7 days.
Switch On / Off EPG
1. Press the GUIDE button to switch on EPG.
2. Press the GUIDE button or the EXIT button again to switch off EPG and return to normal TV viewing.
Select a Programme
Press the buttons to select the desired channel and then press the buttons to select the desired programme. Press the
OK button to confirm.
Button Functions in a 7 Days Guide
Remote Control Button Function
RED (Record)
• Timer Programming See page 52 for details on Timer Programming.
• Press the RED button in the Schedule list to delete the selected preset reminder.
GREEN (Schedule)
Press the GREEN button to view the preset reminders or scheduled recordings in the Schedule list. Press the GREEN button again to return to the EPG.
YELLOW (Date)
Press the YELLOW button and then press the
buttons to view the schedule of the previous /
next day. Press the YELLOW button again to return to the EPG.
BLUE (Remind)
Press the BLUE button while on the selected programme, the Reminder setting menu will be displayed. Press the
buttons to adjust the settings and then press the OK button to confirm the settings. After confirmation, the Schedule list will then be displayed with your preset reminders shown. Press the GREEN button to return to the EPG. The TV will automatically tune to the selected programme when it starts.
i Press to display detailed information of the selected programme (if available).
or
Press to select a channel.
or
Press to select a programme.
OK Press to confirm and view the selected channel. GUIDE / EXIT Press to switch off the EPG.
Schedule List 15:30 10th Mar Delete
Time Date
Programme Title
Channel Name
Back
802 S ZTVM0 3
08 Mi nute
05 Ho ur
Apr M on th
28 Da te
Onc e Mode
Reminder setting
BAC K
OK
_
+
Using the Features
10:00 11:00
Pinky and perky Frankenstei.. No information
2 BBC TWO My Fair Lady
7 BBC THREE This is BBC THREE
70 CBBC Channel Bear Behaving Badly Shaun the .. No information
80 BBC NEWS BBC News Our World: Stormchaser
105 BBC Red Button BBC Red Button
PROGRAMME GUDIE 1 BBC ONE
25 Dec 2008 10:06 10:00-10:15 Pinky and Perky
25 Dec
1 BBC ONE
DTV
current date and time
current programme title
current channel name
programme date programme time
programme information
channel no. and
channel name
L32HED12_IB_Running Change_120613_Annie.indd 43 12年6月13日 下午6:59
44
GB
Using the Features
Teletext (ATV Mode)
Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.
To Turn on Teletext Function
Make sure the TV channel you are watching transmits teletext.
“No Teletext” sign will show on the screen if teletext is not available.
In ATV mode, press the TEXT button to enter Teletext mode. Press the INDEX button to display the index page.
Press the
TEXT button once to exit and the TV will return to the channel you were watching.
To select a page of text
Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the
button.
To move to the previous page, press the
button.
To return to the index page, enter the "100" by using the 0-9 buttons or press the
INDEX button.
Mix
To view a page of text while watching a TV programme, press the TEXT button twice. The text will be superimposed over the TV programme.
Double height text
If you have difficulty reading the text on the TV you can double the height of the text. Press the
SIZE button. The top half of the page will be displayed in double height text.
Press the
SIZE button again. The bottom half of the page will be displayed in double height text.
Press the
SIZE button again to return to the full page.
Page HOLD
If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. To stop the movie to the next sub page, press the
HOLD button.
To continue moving through the sub pages, press the
HOLD button again.
Alternative
Press the SUBPAGE button, and then use the 0-9 buttons to enter a 4-digit page number.
To Reveal Information
Press the REVEAL button to reveal concealed information (quiz answers etc.). Press the
REVEAL button again to conceal the information again.
Fasttext
At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.
L32HED12_IB_Running Change_120613_Annie.indd 44 12年6月13日 下午6:59
45
GB
Using the Features
Digital Teletext (DTV Mode)
Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 33 for details).
Teletext within Digital Service
1. In DTV mode, press the LIST button to display the Channel List.
2. Press the
TEXT button to display the teletext page.
3. Press the 0-9 buttons to select a page number.
4. Follow the instructions on digital teletext and move onto the next step by
pressing OK,
, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.
5. To change digital teletext service, select a different service by pressing the 0-9 buttons or the
buttons.
Alternative
You may press the RED button to the TEXT button to display the teletext information when you see a red logo displayed on the screen (e.g. BBC).
6. Press the
TEXT button to exit.
L32HED12_IB_Running Change_120613_Annie.indd 45 12年6月13日 下午6:59
46
GB
Entertainment
3. Press the buttons to select your storage device and then press the OK button.
Viewing Photos
1. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control then press the
buttons to
select the USB mode and then press the OK button.
2. Press the
buttons to select PHOTO and then press the OK button.
PHOTO
Entertainment
Connecting a USB Storage Device
1. Switch off the TV before connecting any USB
storage device.
2. Connect your USB storage device to the USB port of your TV.
3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch which is located at the front right side under the frame.
4. Press the
/ I button on the front right side panel of
the TV or the
button on the remote control to turn
on your TV and your USB storage device.
5. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select AV and then press the OK
button to confirm.
• If a hard disk is used, make sure its mains adapter is connected to the mains supply.
• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption
may exceed 500mA.
• The maximum supported storage space of the hard disk is 1 TB.
• The file system only supports FAT32 format.
• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not
be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.
• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.
• Disconnect the USB storage device if it is not in use.
Rear Right Side View of TV
DIGITAL
AUDIO OUT
COAXIAL
USB
OUTPUT 5V 500mA
HDMI3 IN
AUDIO
USB Cable (not included)
Adapter
Portable hard Disk
USB Hub
USB
L32HED12_IB_Running Change_120613_Annie.indd 46 12年6月13日 下午6:59
47
GB
Entertainment
5. Press the button to view.
6. Press the OK button or the i button to display the function bar. Press the
buttons and then press the OK button to select the function: Pause / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Music / Playlist / Info / Rotate clockwise / Rotate anti-clockwise / Zoom In / Zoom Out / Move View.
Listening to Music
1. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control then press the
buttons to
select the USB mode and then press the OK button.
2. Press the
buttons to select MUSIC and then press the OK button.
5. Press the
button to start to play.
4. Press the
buttons to navigate in the music folder and then press
the OK button.
If you want to select the specified music, press the
buttons to select the music file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the
button to confirm.
4. Press the
buttons to navigate in the picture folder and then
press the OK button.
If you want to select the specified photos, press the
buttons to select the picture file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the
button to confirm.
3. Press the
buttons to select your storage device and then press the
OK button.
• Some audio file formats will not be supported.
• Supported file formats: mp3.
If this folder also contains music files, you can select a music track to play at the same time you view your photos.
7. Press the EXIT button to return to the previous menu.
File format supported: JPG.
L32HED12_IB_Running Change_120613_Annie.indd 47 12年6月13日 下午6:59
48
GB
Entertainment
4. Press the buttons to navigate in the movie folder and then press the OK button.
If you want to select the specified movie, press the
buttons to select the movie file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the
button to confirm.
5. Press the
button to view.
6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Pause /
FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.
7. Press the EXIT button to return to the previous menu.
3. Press the
buttons to select your storage device and then press the
OK button.
Viewing Movies
1. Press the SOURCE button on the front right side panel of the TV or the
INPUT button on the remote control then press the
buttons to
select the USB mode and then press the OK button.
2. Press the
buttons to select MOVIE and then press the OK button.
• Some audio file formats will not be supported.
• Supported file formats: MPEG1/2.
6. Select the music you want to play, it will show the music information
(Album / Title / Bit Rate / Artist / Sampling / Year / Size). Then press the
button to play.
7. Press the
buttons and then press the OK button to select the function: Pause / FB / FF / Prev / Next / Stop / Repeat All / Playlist / Goto Time.
8. Press the EXIT button to return to the previous menu.
L32HED12_IB_Running Change_120613_Annie.indd 48 12年6月13日 下午6:59
49
GB
Entertainment
4. Press the buttons to navigate in the text folder and then press the OK button.
If you want to select the specified text file, press the
buttons to select the text file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the
button to confirm.
5. Press the
button to view.
6. Press the OK button or the i button to display the function bar. Press the buttons and then press the OK button to select the function: Prev.
page / Next page / Prev. / Next / Stop / Music / Playlist / Info.
3. Press the
buttons to select your storage device and then press the
OK button.
My Text
1. Press the SOURCE button on the front right side panel of the TV or the
INPUT button on the remote control then press the
buttons to
select the USB mode and then press the OK button.
2. Press the
buttons to select TEXT and then press the OK button.
If this folder also contains music files, you can select a music
track to play at the same time you view your photos.
7. Press the EXIT button to return to the previous menu.
L32HED12_IB_Running Change_120613_Annie.indd 49 12年6月13日 下午6:59
50
GB
PVR (Personal Video Recorder)
PVR (Personal Video Recorder)
Time Shift Function (DTV Mode)
This function allows the TV to virtually record the live viewing broadcast programme.
Using the Remote Control
You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 15 seconds. Press the OK button to display the PVR Time Shift progress bar again.
T.SHIFT During playback, press the T.SHIFT button to display a still screen and then press the button
again to resume playback.
or When playing,
• Press the
button repeatedly to speed up x 2 / x 4 / x 8 / x 16.
• Press the
button repeatedly to speed up x 2 / x 4 / x 8 / x 16.
• During fast forward / fast backward state, press the
button to return to normal playback.
or • Press the button to jump about 10% forward.
• Press the
button to jump about 10% back.
• During playback, press the button to display a still screen and then press the button again to resume playback.
• During fast forward / fast backward state, press the
button to return to normal playback.
OK During playback, press the OK button to display a still screen and then press the
button again to
resume playback.
If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the
button and then press the button to confirm.
The ‘PVR Time Shift Progress Bar’
1 Indicates the status of the currently
displayed video (
/ / / )
2 Indicates the time lagging behind
the live broadcast (DVR reviewing)
3 Indicates the available recording
time on your USB storage device
4 Indicates the current time
2
3 4
1
If the transfer rate of the USB storage device is too slow for recording or time shift function, a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. The minimum transfer
speed is 5MB/s.
During normal TV viewing, you may press the T-SHIFT button to virtually pause the live viewing broadcast programme if you want to go out for a while (e.g. going to the bathroom / kitchen). "
" will show on the screen.
Alternative
Press the OK button to display the PVR Time Shift progress bar and then press the buttons to select " Play" on the bar. Press the OK button to confirm.
When you have returned, press the
button to play the missed broadcast programme. " " will show on the screen.
The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed broadcast programme. It will soon turn to normal.
• Time Shift Mode and Recording functions may not work if the signal strength is weak.
• Stop the time-shift function before switching to another input source.
L32HED12_IB_Running Change_120613_Annie.indd 50 12年6月13日 下午6:59
51
GB
PVR (Personal Video Recorder)
Recording DTV Programme onto a USB Storage Device
Use this function to record the DTV programme you are watching on the main screen and save it for future viewing.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the
REC button to record the programme that you are currently
watching.
Recording will stop automatically when the disk is full.
The recording progress bar will disappear after 15 seconds. To display the recording progress bar again, press the OK button or the
REC button.
2. Press the Stop button to stop recording.
If you want to turn off your TV during recording, press the button. A dialogue will display.
Press the
buttons to select your desired option and then press the OK button to confirm.
If you select the middle option in the box, the screen will turn off but the recording will still in progress, the LED indicator will alternatively flash red and blue.
The recording is still inprogress. Do you want to switch off the TV?
Yes, Stop recording and
switch off the TV
Yes, turn off the screen
and sound but keep
recording the programme
No
L32HED12_IB_Running Change_120613_Annie.indd 51 12年6月13日 下午6:59
52
GB
PVR (Personal Video Recorder)
4. The Schedule List will then be displayed with your preset reminders shown.
5. Press the GREEN button to return to the EPG.
6. Press the EXIT button to exit EPG.
2. Press the
REC button or the RED button on the remote control while on the selected programme, the RECORDER menu will be displayed. Press the
buttons to select the settings in the RECORDER menu for the
Channel, Start time, End time and Mode.
Channel Press the buttons to select the channel that you
wanted to record.
Start time
(for Mode Once, Every Day, Weekly)
Press the
buttons to select the Minutes / Hour
/ Month / Date and then press the
buttons to
adjust the start time.
End time
(for Mode Once, Every Day, Weekly)
Press the
buttons to select the Minutes / Hour
/ Month / Date and then press the
buttons to
adjust the end time.
Mode Press the
buttons to select the Auto / Once /
Every Day / Weekly.
3. After finishing all the recorder adjustments, press the OK button to confirm your settings. A Timer Save Success screen will display.
Timer Programming
This function is used for scheduled recording.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the GUIDE button on the remote control. The EPG menu will appear.
10:00 11:00
Pinky and perky Frankenstei.. No information
2 BBC TWO My Fair Lady
7 BBC THREE This is BBC THREE
70 CBBC Channel Bear Behaving Badly Shaun the .. No information
80 BBC NEWS BBC News Our World: Stormchaser
105 BBC Red Button BBC Red Button
PROGRAMME GUDIE 1 BBC ONE
25 Dec 2008 10:06 10:00-10:15 Pinky and Perky
25 Dec
1 BBC ONE
DTV
Back
25 Date
RECORDER
1 BBC ONE
Start Time
10 Hour
25 Date
00 Minute
Dec Month
End Time
15 Minute
10 Hour
Dec Month
25 Date
Mode Once
• When the preset time is reached, the TV will start recording automatically.
• If a programme recording starts when the TV is in standby mode, the LED indicator will alternatively flash red and blue.
Timer Save Success
800 TVE 1
11 Mar 2008 10:00
Schedule List 15:30 10th Mar Delete
Time Date
Programme Title
Channel Name
Back
L32HED12_IB_Running Change_120613_Annie.indd 52 12年6月13日 下午6:59
53
GB
PVR (Personal Video Recorder)
Play Recorded Programme
You can play a recorded programme from the recorded programme list or from a USB Storage Device.
1. Press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control and then press the
buttons to
select the USB mode and then press the OK button.
2. Press the
buttons to select MOVIE and then press the OK button.
3. Press the
buttons to select your storage device and then press the OK
button.
4. Press the buttons to select the "MY PVR" folder and then press the OK button.
5. Press the
buttons to select your recorded programme and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the
button to confirm. Press the button to view.
6. Press the OK button or the i button to display the function bar.
7. Press the
buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.
8. Press the EXIT button to return to the previous menu.
L32HED12_IB_Running Change_120613_Annie.indd 53 12年6月13日 下午6:59
54
GB
Using the DVD Features
Using the Built-in DVD Player
1. Insert a disc with the label side facing towards the rear of the TV. (CD-R,
CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow 10 seconds for the player to load the disc. If you insert the disc wrongly, an error message will be displayed.
2. After the disc is inserted, the TV will change the input source to DVD automatically and Smart NAVl will show the content of the disc
automatically.
3. If the DVD player does not automatically play the disc, press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select DVD and then press the OK button to confirm. Press the button on the unit or the
button on the remote control to start
playing.
4. Press the
button if you want to remove the disc.
Compatible Disc Types
Disc Types Disc Logo Recorded Content
DVD-VIDEO (Digital Versatile Disc)
AUDIO + VIDEO
DVD±RW (Audio/Video format or JPEG files)
DVD+ReWritable
AUDIO + VIDEO + JPEG
DVD±R (DVD Recordable - Audio/Video format or JPEG files)
DVD+R
AUDIO + VIDEO + JPEG
CD-R (CD Recordable - Audio/Video format or JPEG files)
AUDIO + VIDEO + JPEG
CD-RW (CD-Rewritable - Audio/Video format or JPEG files)
AUDIO + VIDEO + JPEG
AUDIO-CD (Compact Disc Digital Audio)
AUDIO
Supported Formats
JPEG
• The file extensions has to be .jpg and not .jpeg.
• Pictures encoding must comply with JPEG/ISO format.
• This DVD player can only display DCF-standard still pictures or JPEG pictures such as TIFF.
Some recorded files may not be played due to the type and format
of the disc or condition of the recording.
Region Code
Both the DVD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.
The Region Number for this DVD player is described on the rear panel of the TV.
Disc Type DVD-VIDEO
Region code
Using the DVD Features
• Only insert 12cm discs. Do not insert or play 8cm discs; they will get stuck.
• Ensure disc is fully ejected before removing it, or else you risk damaging the DVD player.
Label side at
the back
Unable to play disc! Check label faces rear of TV. Check disc for marks or damage. Check disc is compatible type.
L32HED12_IB_Running Change_120613_Annie.indd 54 12年6月13日 下午6:59
55
GB
Using the DVD Features
Basic DVD Playback Functions
Playing the DVD
Depending on the disc, a menu may appear on the TV screen once the disc has loaded. When playing the disc, you may use the
button to toggle between Play and Pause mode. This product also supports Menu / Title / Sequential / Programme Playback.
Menu Playback (for DVD)
For DVD discs, the screen will display the DVD Disc Menu (Root Menu). Press the
button or the OK button to start from the highlighted content. Press the DVD MENU button to return to the Root Menu when playing the disc. For some DVD discs you may need to press the DVD MENU button or the TITLE button to display the Disc Menu.
Stopping Playback
Press the button once to stop. Press the button to resume from where you stopped. Press the
button twice to stop. Press the button to start from the beginning.
In order to protect the disc, press the
button twice and then press the button to eject the disc. When the disc is ejected, hold the disc edge slightly and remove it from the disc slot. When not using the DVD function (in stand-by-mode or using others modes for a long period of time), please take out the disc to protect the DVD loader and the disc.
Previous / Next (for DVD / CD / Multimedia discs)
Press the button to play the last Title / Chapter / Track. Press the
button to play the next Title / Chapter / Track.
If the current track is the first one, pressing the button will restart the disc from the beginning.
If the current track is the last one, pressing the
button will stop the playback.
There will be no sound during forward or backward.
For DVD discs, the above functions may very due to different DVD disc’s structure.
Forward / Backward (for DVD / CD / Multimedia discs)
There are 4 speeds for forward. Press the button to toggle between the dierent forward options in sequence. (FORWARD x 2 / FORWARD x 4 / FORWARD x 8 / FORWARD x 20 / Play). Press the
button to return to normal speed playback.
For DVD discs, when selecting backward to first title / chapter, the disc will start from the beginning.
Pause (for DVD / CD / Multimedia discs)
• For CD / JPEG discs, press the button to pause; press the button again to resume playback.
• For DVD discs, press the
button to pause; press the button again to resume playback.
Repeat (for DVD / CD / Multimedia discs)
Press the REPEAT button once to display the current repeat mode.
• For CD discs, while playing in sequence, you may use the repeat playback. There are 3 repeat modes, press the REPEAT button
to toggle between the different repeat modes in sequence. (REPEAT (OFF) / REPEAT (1) / REPEAT (ALL)).
• For DVD discs, you may setup the repeat playback mode. There are 4 repeat modes, press the REPEAT button to toggle
between the different repeat modes in sequence. (REP: (OFF) / REP: (CHAPTER) / REP: (TITLE) / REP:(ALL)).
• For MP3 / JPEG discs, while playing the disc, you may use the repeat playback. There are 4 repeat modes, press the REPEAT
button to toggle between the different repeat modes in sequence. (REPEAT (OFF) / REPEAT (1) / REPEAT (DIR) / REPEAT (ALL)).
L32HED12_IB_Running Change_120613_Annie.indd 55 12年6月13日 下午6:59
56
GB
Using the DVD Features
Press the button four times to display the four page as shown below:
For some discs, only Time can be selected in the GOTO function.
Info (for DVD / CD / Multimedia discs)
Press the i button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information.
For DVD discs, press the
button once to display the first page as shown below:
: 2/23 : 1/1 Title Elapsed 00:02:56
: 2/23 : 1/1 Title Remain 00:01:42
: 2/23 : 1/1 Chapter Elapsed 00:03:05
: 2/23 : 1/1 Chapter Remain 00:01:33
Press the button twice to display the second page as shown below:
Press the
button three times to display the three page as shown below:
PROG (for DVD / CD / Multimedia Discs)
Allows you to set the title and chapter you want to skip to play.
1. Press the PROG button to display the first page as shown below.
2. Press the 0-9 buttons to set T (title number).
3. Then press the
button and press the 0-9 buttons to set C (chapter
number).
4. Press the
button to select PLAY or CLEAR, press the OK button confirm.
5. Press the PROG button to exit the program menu.
Angle (for DVD)
Allows you to switch the viewing angle of video.
Press the ANGLE button repeatedly to select the different angle you want (Only for the discs has this character).
Step (for DVD)
Allows you to watch program in details of every frame.
Press the STEP button repeatedly to watch every frame. Press the
button to exit the step mode.
Zoom (for DVD)
Allows you to select the video size of programme stream.
Press the ZOOM button to select the size you want.
Goto (for DVD / CD / Multimedia discs)
This function allows you to play your favourite Title / Chapter / Time. Press the GOTO button to activate the on screen scroll-down menu for selecting. Input your Title / Chapter / Time by pressing the 0-9 buttons or input the playback time. After editing, press the OK button to start. If the input is invalid, it will not function.
PROGRAM
1.
Title
:Select : Play : Clear
2. 3 01
02 03 04 05
4.
5.
6.
7.
Chapter
L32HED12_IB_Running Change_120613_Annie.indd 56 12年6月13日 下午6:59
57
GB
Using the DVD Features
Playing Multimedia Discs
After loading the multimedia disc, the disc contents will automatically be displayed and sorted by different file formats into Music / Picture / Video folders.
1. Press the
buttons to navigate through the folders and files.
2. Press the 0-9 buttons to select the contents directly (for example, to select
track 23, press the LIST button twice followed by 3).
3. When playing or pausing with picture playback, you may use the
buttons to flip / rotate the picture.
Total Files: 0
ROOT
File Type Sort File
Movie
Music
Picture
TEXT
Audio (for DVD / CD)
Press the AUDIO button to toggle between different audio modes in sequence.
For CD discs: Stereo / MonoL / MonoR.
Some discs may contain multiple languages which can be selected
by pressing the AUDIO button.
Repeat A-B (for DVD / CD)
When playing DVD, CD disc, press the A-B button to repeat certain content. Press the A-B button on the start point (A) and the end point (B) to select the repeat part. Press the A-B button a third time to cancel the A-B button function and return to normal playback.
L32HED12_IB_Running Change_120613_Annie.indd 57 12年6月13日 下午6:59
58
GB
Using the DVD Features
Using the DVD Language Setup Page
In the DVD mode, press the SETUP button on the remote control. Press the buttons to select the Language Setup menu, and then press the
buttons to select the menu options. Press the Setup button to exit the menu.
In Setup mode, the disc playback function will not be available.
Option Description
Language Setup
OSD Menu Audio Subtitle
English
: Select
OSD Set the OSD language to your language of choice
Language Setup
OSD Menu Audio Subtitle
English French German Italian Spanish
: Select
Menu DISC MENU
Select the Disc Menu language.
Language Setup
OSD Menu Audio Subtitle
: Select
English French German Italian Spanish
Audio Set the Audio language to your language of choice.
Language Setup
OSD Menu Audio Subtitle
: Select
English French German Italian Spanish
Subtitle SUBTITLE
Select the Subtitle language.
Language Setup
Menu Audio Subtitle
Western European Central European
: Select
Encoding
Encoding Select the encoding of subtitle Western European or Central
European.
Not all DVD discs support multiple audio
languages.
Not all DVD discs support multiple audio
languages.
The default language is English.
L32HED12_IB_Running Change_120613_Annie.indd 58 12年6月13日 下午6:59
59
GB
Using the DVD Features
In Setup mode, the disc playback function will not be available.
Using the DVD Screen Setup Page
In the DVD mode, press the SETUP button on the remote control. Press the buttons to select the Screen Setup menu, and then press the
buttons to select the menu options. Press the Setup button to exit the menu.
Option Description
Screen Setup
TV Type Screen Saver TV System Brightness
4:3 PS 4:3 LB 16:9
: Select
Contrast
TV Type 4:3 Pan Scan
Widescreen picture shown in the full screen with some part cut.
4:3 Letter box
Widescreen picture shown in the full screen with black bars on the top and bottom of the screen.
16:9
Widescreen picture shown in the full screen.
Screen Setup
TV Type Screen Saver TV System Brightness
On Off
: Select
Contrast
Screen Saver When the player stops or the picture becomes motionless for
a couple of minutes, there will be a screen saver to prevent damage to the display screen.
ON: To activate screen saver.
OFF: To disable screen saver.
Screen Setup
TV Type Screen Saver TV System Brightness
NTSC PAL Auto
: Select
Contrast
TV System In order for the disc to play, the colour system of the DVD
player, disc and TV should match.
NTSC
This format is used by some other countries, e.g. USA.
PAL
This is the format used in UK.
AUTO
This format can be used if your TV / DVD is capable of both PAL and NTSC formats and this is the default setting.
PAL format is generally used for TV’s in the UK.
If NTSC is selected with a non-compatible television, you may experience interference or picture scrolling.
L32HED12_IB_Running Change_120613_Annie.indd 59 12年6月13日 下午6:59
60
GB
Using the DVD Features
In Setup mode, the disc playback function will not be available.
In Setup mode, the disc playback function will not be available.
Option Description
Screen Setup
TV Type Screen Saver TV System Brightness
Normal Bright Soft
: Select
Contrast
Brightness Select the Brightness of screen in DVD mode.
Screen Setup
TV Type Screen Saver TV System Brightness
: Select
Contrast
-3
-2
-1 0 +1 +2 +3
Contrast Select the Contrast of screen in DVD mode.
Using the DVD Audio Setup Page
In the DVD mode, press the SETUP button on the remote control. Press the buttons to select the Audio Setup menu, and then press the
buttons to select the menu options. Press the Setup button to exit the menu.
Option Description
Audio Setup
Downmix
Lo/Ro Lt/Rt
: Select
Downmix Lo/Ro
Mixed stereo surround output.
Lt/Rt
Mixed stereo Lt/Rt output.
Using the DVD Custom Setup Page
In the DVD mode, press the SETUP button on the remote control. Press the buttons to select the Custom Setup menu, and then press the
buttons to select the menu options. Press the SETUP button to exit the menu.
Option Description
Custom Setup
Parental Ctrl Password ... Style Default
: Select
5: PGR 6: R 7: NC+17 8: ADULT OFF
Parental Ctrl Parental Ctrl
Allows the user to set a maximum rating level for a movie that can be played (e.g. PG rating). Movies rated higher than the level set will not be played. The parental lock can only be changed after inputting the correct password.
This function is available only when the discs have ratings encoded on them.
L32HED12_IB_Running Change_120613_Annie.indd 60 12年6月13日 下午6:59
61
GB
Using the DVD Features
Option Description
Custom Setup
Parental Ctrl Password ... Style Default
: Select
Old: New: Verify
_ _ _ _ _ _ _ _ _ _ _ _
Password Password Change
To change the password, you need to:
1. Input old password. (for initial use, please enter factory default password “8899”)
2. Input a new 4 digit password and then press the OK button to confirm.
Custom Setup
Parental Ctrl Password ... Style Default
: Select
Style 1 Style 2 Style 3 Style 4
Style Select the Style of custom in DVD mode.
Custom Setup
Parental Ctrl Password ... Style Default
: Select
Reset
Default Default
To restore all setup parameters to the factory settings EXCEPT the password. This function is available in stop state or when the tray is opened.
If you forget your DVD password, please enter
the master password “8899”.
Using the DVD Exit Setup Mode Page
In the DVD mode, press the SETUP button on the remote control. Press the buttons to select the Exit Setup Mode menu. Press the Setup button to exit the menu.
In Setup mode, the disc playback function will not be available.
Option Description
Exit Setup Mode
: Select
Exit Setup Mode Press the DVD Setup button to exit the menu.
L32HED12_IB_Running Change_120613_Annie.indd 61 12年6月13日 下午7:00
62
GB
Maintenance, Hints and Tips, Specication
1. Use a soft dry cloth to wipe away the dust from the screen and surfaces.
2. If the surfaces are extremely dirty, clean the TV with a cloth which has been
dipped in a weak soapy water. Wring the cloth until it is almost dry, then use it to wipe the TV.
3. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on.
Maintenance
Careful and regular cleaning can prolong the life of your TV.
Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray. They may damage the disc.
Storing Discs
• Do not store discs in places subjected to direct sunlight or near heat sources.
• Do not store discs in places subjected to moisture and dust such as a bathroom or near a humidifier.
• Storing discs vertically in a case, stacking discs or placing objects on discs outside of their cases may cause warping.
Be sure to press the / I button on the front right side panel of the TV or
the
button on the remote control and then the POWER ON/OFF switch
which is located at the front right side under the frame to turn off the TV.
Disconnect the mains cable from the mains socket before any cleaning.
Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals.
Do not use compressed air to remove dust.
Handling Discs
• Do not touch the playback side of the disc.
• Do not attach paper or tape to the disc.
Maintenance
Playback side
L32HED12_IB_Running Change_120613_Annie.indd 62 12年6月13日 下午7:00
63
GB
Maintenance, Hints and Tips, Specication
Hints and Tips
The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
The TV does not operate properly.
The TV does not respond when pressing any buttons
• The TV may freeze up during use. Disconnect the mains cable from the mains socket for a few minutes. Reconnect the mains cable and try to operate it again as usual.
TV cannot be switched on
• Check that the TV is connected to the mains supply and the POWER ON/OFF switch which is located at the front right side under the frame is switched on.
• Make sure all connected AV devices are switched off before switching on your TV.
The remote control does not work
• Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV.
• Ensure that the batteries are installed with the correct polarity (+ to +, - to -).
• Install new batteries.
Power is suddenly turned off
• Check the power of the TV. The mains supply maybe interrupted.
• Check if the sleep timer is set.
• Check whether the Auto Standby is activated.
The video function does not work.
No Picture & No Sound
• Check whether the TV is switched on.
• Try another channel. The problem may be caused by the broadcaster.
Picture appears slowly after switching on
• This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
• Adjust the settings in the PICTURE menu.
• Try another channel. The problem may be caused by the broadcaster.
• Check if the video cables are connected properly.
Horizontal / Vertical bar or picture shaking
• Check for local interference such as an electrical appliance or power tool.
Poor reception on some channels
• Station or cable channel may be experiencing problems, tune to another station.
• Station signal is weak, reposition the aerial for better reception.
• Check for sources of possible interference.
Lines or streaks in pictures • Check aerial (Change the position of the aerial.)
No pictures when connecting HDMI • Check if the input source is HDMI1 / HDMI2 / HDMI3.
Picture appears in wrong ratio
• Adjust the Aspect Ratio settings in the OPTION menu or press the ASPECT button on the remote control.
The audio function does not work.
Picture OK but no sound
• Press the VOL + / – buttons.
• Sound muted? Press the
MUTE button.
• Try another channel. The problem may be caused by the broadcaster.
No output from one of the speakers • Adjust the Balance settings in the SOUND menu.
Unusual sound from Inside the TV
• A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.
No sound when connecting HDMI • Check if the input source is HDMI1 / HDMI2 / HDMI3.
Audio noise • Keep the RF coaxial cable away from the other connected cables.
Password
Lost password
• Select the Set Password setting in the LOCK menu, then enter the following master password “8899”. The master password clears your previous password and allows you to enter a new password.
Hints and Tips
L32HED12_IB_Running Change_120613_Annie.indd 63 12年6月13日 下午7:00
64
GB
Maintenance, Hints and Tips, Specication
There is a problem in PC mode.
The signal is out of range (Invalid format)
• Adjust the resolution, horizontal frequency, or vertical frequency.
Vertical bar or stripe on background & Horizontal Noise & Incorrect position
• Use Auto configure or adjust clock, phase, or H/V position.
Screen colour is unstable or shows a single colour
• Check the signal cable.
• Reinstall the PC video card.
The DVD function does not work.
DVD will not read the disc
• Check if the disc is correctly inserted.
• Check that the disc is clean.
• Check if there is any obvious damage to the disc.
• Try to play the disc on another DVD to check whether it is has content.
DVD does not have the signal • Check if the TV is in DVD mode.
Lost DVD password
• Select PASSWORD in the SYSTEM SETUP of DVD menu, then enter the following master DVD password “8899”. The master password clears your previous password and allows you to enter new password.
FAQs (Frequently Asked Questions)
Why have I lost some / all of my channels?
• It happens sometimes if you have a weak signal. Usually it just means you’ll need to rescan your digital box or TV. Don’t worry, it easy to do. And once you’ve done it, you should get all the Freeview channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer.
Why do I get ‘blocking’ on my digital picture?
• In most cases, blocking is caused by a reception problem – either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local aerial installer.
• Blocking can also be caused by a digital signal that is too strong. If you are still experiencing blocking and the signal is strong, consult your local aerial installer for advice.
Can I watch Freeview using a portable set-top aerial?
• Some, but only a few, homes may be able to use a set top aerial. However, for a much better reception, we strongly recommend that you use a rooftop aerial.
• If you do not have access to a rooftop aerial – for example, if you rent a flat and the aerial is the responsibility of your landlord, or if you’re using a second TV in the bedroom and don’t want the hassle and expense of using extension cables, a set – top aerial may be your only option.
What type of aerial do I need?
• If you are installing a new aerial, we recommend a wideband rooftop aerial rather than a loft aerial. Loft aerials generally receive a weaker digital signal and are more likely to get interference from other electrical devices in the home. We suggest you have an aerial survey done before getting an aerial upgrade.
• Talk to your retailer or contact your local aerial installer.
L32HED12_IB_Running Change_120613_Annie.indd 64 12年6月13日 下午7:00
65
GB
Maintenance, Hints and Tips, Specication
Display Modes
The screen resolution has been optimised during production for the display modes listed below.
Whilst the TV is capable of accepting a 1080p input, it is not capable of displaying this screen resolution and therefore the display will be scaled to fit the native resolution of the screen automatically.
YPbPr Mode
Resolution Vertical Frequency (Hz) Aspect Ratio
480I: 720 x 480
60
Auto / Smart Zoom / Zoom / 16:9 /
4:3 / Subtitle
480P: 720 x 480
576I: 720 x 576
50
576P: 720 x 576
720P: 1280 x 720
50
60
1080I: 1920 x 1080
50
60
1080P: 1920 x 1080
50
60
PC Mode
Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video.
Resolution Vertical Frequency (Hz) Aspect Ratio
640 x 480
60
4:3 / 16:9
72
75
800 x 600
60
72
75
1024 x 768
60
70
75
1360 x 768 60
HDMI Mode
Resolution Vertical Frequency (Hz) Aspect Ratio
480I: 1440 x 480 60
Auto / Smart Zoom / Zoom / 16:9 /
4:3 / Subtitle
480P: 720 x 480 60
576I: 1440 x 576 50
576P: 720 x 576 50
720P: 1280 x 720
50
60
1080I: 1920 x 1080
50
60
1080P: 1920 x 1080
50
60
Display Modes
L32HED12_IB_Running Change_120613_Annie.indd 65 12年6月13日 下午7:00
66
GB
Maintenance, Hints and Tips, Specication
Specications
Model L32HED12
Panel System 31.5 inch LED Panel
Display Resolution 1366 pixels (horizontal) x 768 pixels (vertical)
Television System PAL I / BG / DK SECAM L / BG / DK
Brightness 280-300 cd/m
2
Contrast Ratio 1000:1
Power Source 100-240V~ 50/60Hz
Energy Efficiency Class A
Screen Size (measured diagonally) Approx. 80 cm (31.5 inch)
Power Consumption (In HOME / STANDBY mode)
40 W
Average Annual Energy Consumption 58 kWh
Standby Power Consumption 0.4 W
Operating Temperature 0°C – 40°C
Operating Humidity 10% – 80%
Mercury Content (mg) 0
Presence of Lead
Reference Period 2010/1062 – 2014
Speaker Power 6 W + 6 W
Dimension( W x D x H) with base 779 x 205 x 545 mm
Weight (Net) 9 kg
Inputs / Output
SCART 1
HDMI 3
PC IN 1
PC AUDIO 1
YPbPr 1
Common Interface 1
AV 1
USB 1
ADUIO IN (RCA) 1 (L + R)
RF (75 Ω) 1
COAXIAL 1
Features and specifications are subject to change without prior notice.
Specifications
L32HED12_IB_Running Change_120613_Annie.indd 66 12年6月13日 下午7:00
67
GB
Maintenance, Hints and Tips, Specication
A+ A B C D E F
ENERG
YIEIJA
IA
2010/1062 - 2014
58
kWh/annum
40
Wa
80
cm
31.5
inch
L32HED12
A
L32HED12_IB_Running Change_120613_Annie.indd 67 12年6月13日 下午7:00
68
GB
Safety Warnings
Safety Warnings
• Read all the instructions carefully before using the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a third party make sure to include this manual.
• Check that the voltage marked on the rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any
doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
Location of Unit
• The unit must be placed on a flat stable surface and should not be subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.
• The mains socket must be located near the unit and should be easily accessible.
• This unit is designed for indoor use only.
Temperature
• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.
• Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
• Never place any type of candle or naked flame on the top of or near the unit.
Moisture
• To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.
• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.
Ventilation
• To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.
• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
• Make sure that there is a gap of at least 10 cm on both sides and a gap of 20 cm at the top.
Safety
• Always disconnect the unit from the mains supply before connecting / disconnecting other devices or moving the unit.
• Unplug the unit from the mains socket during a lightning storm.
Mains Cable
• Make sure the unit or unit stand is not resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.
• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Interference
• Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.
Optimum Viewing
• View the unit in moderate light to prevent eye strain. It is recommended to watch the unit from a distance 3-7 times that of the screen height.
LCD screen
• The LCD screen is manufactured using high-precision technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.
Screen Burn
• A characteristic of Plasma and TV Panels is that displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen.
• Examples of images that you need to watch out for are as follows (this is not an all-inclusive list):
1. Black Bars: If black bars appear at the left / right or
top / bottom of the screen, it is recommended to change the format so that the picture fills the entire screen.
2. TV Channel Logos: e.g. Shopping channel logos
and pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.
3. Time Displays
4. Teletext: Do not view a stationary page for long
periods of time.
5. TV Menus
6. Pause Mode: Do not leave the screen in pause
mode for long periods of time, e.g. when watching videos.
• To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.
10 cm 10 cm
20 cm
10 cm
Safety Warnings
L32HED12_IB_Running Change_120613_Annie.indd 68 12年6月13日 下午7:00
69
GB
Safety Warnings
Standby
• The
button on the remote control does not switch off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Disconnect the mains plug from the mains socket.
Batteries
• Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous.
• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.
• Please dispose of batteries correctly by following the guidance in this manual.
• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Supervision
• Children should be supervised to ensure that they do not play with the unit and the remote control.
• Never let anyone especially children push anything into the holes, slots or any other openings in the case ­this could result in a fatal electric shock.
DVD
• Class 1 Laser Product
This unit utilises a laser. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
• Before moving the unit, ensure the disc tray is empty.
• Always remove the disc when the unit is not in use.
• Failure to do so will risk severely damaging the disc
and the unit.
• Do not stack devices, heat from other devices may aect the performance of the unit.
CLASS 1
LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.
Service
• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.
• Do not open any fixed covers as this may expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains socket before cleaning.
• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface.
• Do not use liquids to clean the unit.
• The wall socket plug is used as a disconnect device, the
disconnect device should be readily accessible.
•
This equipment is a Class II or double insulated
electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
L32HED12_IB_Running Change_120613_Annie.indd 69 12年6月13日 下午7:00
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you purchased the product.
Rovi Proprietary Rights
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Restriction on Use & Rovi Trade Mark Rights
Use of the copyright protection technology contained in this product must be authorised by Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Rovi Corporation. The names “Rovi Corporation” and “Macrovision” are protected by trademarks.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
The FREEVIEW word and logo are trademarks of DTV services Ltd and are used under licence. ©DTV Services Ltd 2002
The “HD Ready” logo is a trademark of DIGITALEUROPE.
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialogue.
TruSurround HD, SRS and the
symbol are trademarks of SRS Labs, Inc.
All trademarks are the property of their respective owners and all rights are acknowledged.
DSGRetailLtd•MaylandsAvenue•HemelHempstead
Herts•HP27TG•England
(P.N.: 002-B55-LOGIK)
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit
www.partmaster.co.uk or call 0844 800 3456 (UK customers only). Calls charged at National Rate.
If you require a replacement for any of the items listed below, please quote their corresponding part numbers:
Replacement Part Part Number
TV Base 154-700-EA3273
Remote Control 845-055-00B01
AAA Batteries 413-100-0007
AV Cable 617-151-1230
Screw A 100-014-4011
Screw B 104-114-4031
L32HED12_IB_Running Change_120613_Annie.indd 70 12年6月13日 下午7:00
L32HED12_IB_Running Change_120613_Annie.indd 71 12年6月13日 下午7:00
L32HED12_IB_Running Change_120613_Annie.indd 72 12年6月13日 下午7:00
Loading...