Logik L32SWLB14 Quick Start Manual

11

Unpacking

22

Connections

33

Battery Replacement

44

General Operation

Tip:Tip:

Quick Start Guide

White

Red

Quick Start Guide

Instruction

Manual

1

3

2

4

Thank you for purchasing your new Logik Soundbar.

Please follow this quick start guide for a successful rst time set up.

We recommend that you spend some time reading the instruction manual in order to fully understand all the operational features it offers.

Read all the safety instructions carefully before use and keep the instruction manual for future reference.

Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local regulations.

Ensure all audio connections of the unit are
connected before connecting to the mains
power socket.

QSG-L32SWLB14-140304V2

You will nd that there are many exciting features available.

To get to know all these features, please take some time to read the instruction manual provided.

Soundbar with
Wireless Subwoofer

L32SWLB14

Using the OPTICAL Connection

Using the AUX Connection

Using the MP3 LINK Connection

Connecting to the Mains Supply

3.5mm to RCA

Stereo Audio Cable

To the mains socket

Main Unit

Subwoofer

To the mains socket

3.5mm to 3.5mm

audio cable

OPTICAL cable

(not included)TVRear view of

the unit

Rear view of

the unit

Side view of

the unit

TV

Audio device

Main Unit

Subwoofer Remote Control

(battery included)

Wall Bracket x 2

Instruction Manual Quick Start Guide

Mains Cable
(for Subwoofer)

3.5mm to 3.5mm
Audio Cable

3.5mm to RCA Stereo
Audio Cable

The remote control requires a CR2025, 3V Lithium battery.

1. Slide and hold the battery
release tab in the direction
of the arrow.

2. Pull out the battery holder
and remove the old battery.

3. Replace with a new battery.

4. Insert the battery holder
back into the remote
control.

Start Up

• Press /SOURCE on the main unit or on the remote control
to switch the main unit on. The status indicator of the last used
mode will light up.

• Press and hold /SOURCE on the main unit or press on the
remote control to switch the main unit back to Standby mode.
The POWER Indicator will light up red.

• Disconnect the mains plug from the mains socket if you want

to switch the unit off completely.

Selecting Modes

Press /SOURCE on the main unit or SOURCE on the remote
control repeatedly to switch between AUX, MP3 LINK,

OPTICAL and BLUETOOTH modes.

Adjusting the Volume

• Press VOL +/- to adjust the volume.

• If you wish to turn the sound off, press MUTE on the remote

control. Press MUTE again or press VOL + to resume normal
listening.

Automatic pairing

The subwoofer and soundbar will automatically pair when both
units are plugged into the mains sockets and turned on.

• When the subwoofer is pairing with the main unit,

the Pair Indicator will ash.

• When the subwoofer is paired with the main unit,

the Pair Indicator will light up.