Front View .............................................................................................................................................................................8
Remote Control ..................................................................................................................................................................9
Battery Installation for the Remote Control .......................................................................................................... 11
Remote Control Operation Range ............................................................................................................................ 12
Using the OPTICAL/HDMI/SCART Connection ..................................................................................................... 13
Connecting to the Mains Socket ............................................................................................................................... 13
Using a USB Device ..............................................................................................................................14
Region Code .....................................................................................................................................................................15
Basic DVD Playback ........................................................................................................................................................ 16
Selecting Chapter / Title time / Chapter time .......................................................................................................17
Previous and Next Chapter .........................................................................................................................................17
Fast Rewind and Fast Forward ...................................................................................................................................17
Subtitle Language .......................................................................................................................................................... 19
Info ....................................................................................................................................................................................... 19
Title ......................................................................................................................................................................................19
Menu ................................................................................................................................................................................... 19
Playing an Audio or a JPEG Picture CD ...................................................................................................................20
Previous and Next ...........................................................................................................................................................20
Fast Rewind and Fast Forward ...................................................................................................................................21
Cleaning the Unit ............................................................................................................................................................ 28
Hints and Tips ......................................................................................................................................29
Read all the instructions carefully before using
the unit and keep them for future reference.
Retain the manual. If you pass the unit onto a
third party make sure to include this manual.
Check that the voltage marked on the rating
label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor, household
use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas/
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects lled with liquids, such as
vases, should be placed on the unit. Do
not operate the unit with wet hands, near
water or other liquid.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting/disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
before a lightning storm.
Mains Cable
• Make sure the unit is not resting on top of
the mains cable, as the weight of the unit
may damage the mains cable and create a
safety hazard.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in
order to avoid a hazard.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the operating performance of the
unit, and cause a distorted picture or
sound.
Batteries
• Batteries used in the remote control for this
unit are easily swallowed by young children
and this is dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the remote control.
Seek medical advice if you believe a cell
has been swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
Supervision
• Children should be supervised to ensure
that they do not play with the unit and the
remote control.
5
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
Class 1 Laser Product.
• This unit utilises a
laser. Use of controls,
adjustments or
CLASS 1
LASER PRODUCT
performance of
procedures other than those specied
herein may result in hazardous radiation
exposure.
• Before moving the unit, ensure the disc
tray is empty.
• Always remove the disc when the unit is
not in use.
• Failure to do so will risk severely damaging
the disc and the unit.
• Do not stack devices, heat from other
devices may aect the performance of the
unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
The lightning ash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
unit’s enclosure that may be of
sucient magnitude to constitute a
risk of electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the manual
accompanying the unit.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.
6
Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction
manual in order that you fully understand all the operational features
it oers. You will also nd some hints and tips to help you resolve any
issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all packaging from DVD Player. Retain the packaging. If you dispose of it please do
so according to local regulations.
SUBT ITLE
3
1 2
4
7 89
0
SETU P
LANG UAGE
5
6
OSD
PROGCLEA R
10+
SOUR CE
ENTE R
MENUMUTE
REPE ATSEAR CH
DVD Player
REV
FWD
TITL ERETU RN
ANGL E
Remote Control
STOP PLAY/ PAUSE
VOLU ME
-
+
A-B
ZOOMAUDI OSTEP
PREV
NEXT
SLOW
(2 AAA batteries included)
Instruction
Manual
Quick Start Guide
Instruction ManualQuick Start Guide
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0344 800 3456 for assistance.
7
Product Overview
Front View
43215678
1. Disc Tray
Load a disc into the disc drive.
2. OPEN/CLOSE button
Open and close the disc tray.
3. Display Screen
Show information about the current
status of the DVD player.
4. Remote Control Sensor
Rear View
OPTIC AL
HDMISCART
123
5. USB Slot
Connection for a USB Flash Drive.
6. PLAY/PAUSE button
Start playback/stop playback
momentarily
7. STOP button
Stop playback.
8. POWER button
Switch the unit between ON and OFF
mode.
1. OPTICAL Output Socket
Connect an Optical cable to a TV or a
monitor equipped with an Optical input
terminal.
2. HDMI Output Socket
Connect an HDMI cable to a TV, a monitor
or an AV amplier equipped with an HDMI
input terminal.
8
3. SCART Output Socket
Connect a SCART cable to a TV or a
monitor equipped with a SCART video
input terminal.
Remote Control
1. POWER
Switch the unit between ON and OFF
mode.
2. 0–9, 10+
Select the numeric items in a menu.
3. SETUP
Display the Setup Menu of the DVD
player.
4. CURSOR
Move up, down, left and right in a menu.
5. ENTER
Conrm a selection on the menu screen
6. MENU
Enter or exit the disc contents menu.
7. SEARCH Button
Search and start playback from a
selected point on the disc.
8. REV
Fast reverse during playback.
9. STOP
Stop the playback.
10. FWD
Fast forward during playback.
11. VOLUME +/–
Increase and decrease the volume.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SU BT IT LE
5
VO LU M E
EN TE R
3
6
+
A- B
LA NG UA GE
OS D
PR OGCL EA R
SO UR CE
RE PE ATSE AR C H
PR EV
NE XT
SL OW
12
4
789
10 +
0
SE TU P
ME NUMU TE
RE V
STOPP LAY/ PAU SE
FW D
-
TI TL ERE TU RN
ZO OMAU DI OST EP
AN GL E
12. TITLE
Return to the previous menu or show
the title menu. (If it is available in the
DVD features.)
13. RETURN
Return to root menu from normal play,
and then return to normal play from root
menu.
14. ANGLE
Switch / change the camera angle
during playback. (If it is available in the
DVD features.)
15. ZOOM
Enlarge the picture on the TV.
9
16. OPEN/CLOSE
Open or close the DVD disc tray.
17. SUBTITLE
SU BT IT LE
12
4
3
LA NG UA GE
5
6
OS D
789
PR OGCL EA R
10 +
0
SE TU P
EN TE R
ME NUMU TE
RE V
STOPP LAY/ PAU SE
FW D
VO LU M E
-
TI TL ERE TU RN
ZO OMAU DI OST EP
AN GL E
+
A- B
SO UR CE
RE PE ATSE AR CH
PR EV
NE XT
SL OW
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Switch between dierent subtitle
languages. (Available languages depend
on the DVD features.)
18. LANGUAGE
Press to ch ange the OSD language.
19. OSD (On screen Display)
Display the disc information.
20. Clear
Clear previous input.
21. PROG
Programme and view the selected starting
point of a chapter and title in the disc.
22. SOURCE
Switch between DVD and USB as the input
source.
23. MUTE
Mute and restore audio output.
24. REPEAT
Select between dierent repeat modes.
25. PREV
Return to the previous title, chapter or
track.
26. PLAY / PAUSE
10
Play / pause / resume / playback.
27. NEXT
Skip to the next title, chapter or track.
28. A-B
Repeat playback between 2 particular
points on a disc.
29. SLOW
Play the video in slow motion forwards or
in reverse.
30. AUDIO
Change the audio mode.
31. STEP
Play the movie forward frame by frame.
Battery Installation for the Remote Control
1. Press and lift the back cover up to
open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make
sure the battery match those shown
in the (+) and (–) ends of the battery
compartment.
3. Close the battery compartment cover.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage,
which could cause re, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will not function. Replace both
batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix dierent types of
batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in
accordance with local regulations.
Handling the Remote Control
• Be aware of your ngernails when removing the battery cover and the battery.
• Do not drop or cause impact to the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of
excessive heat.
• Remove the battery from the remote control when not in use for a long
period of time, as it could cause corrosion or battery leakage and may result in
physical injury and/or property damage including re.
11
Remote Control Operation Range
• The remote control sensor on the front unit is
sensitive to the remote control’s commands up to a
maximum of 5 metres away and within a maximum
of a 60° arc.
• Please note that the operating distance may vary
depending on the brightness of the room.
30°30°
Within about 5 m
SUBTITLE
3
1 2
LANGUAGE
5
6
4
OSD
7 8 9
PROGCLEAR
10+
0
SOURCE
SETUP
ENTER
MENUMUTE
REPEATSEARCH
REV
PREV
STOP PLAY/PAUSE
FWD
NEXT
VOLUME
-
+
A-B
TITLE RETURN
SLOW
ZOOM AUDIO S TEP
ANGLE
12
Connections
Using the OPTICAL/HDMI/SCART Connection
Television
OPTICAL Cable
(not included)
1
HDMI Cable
(not included)
OPTIC AL
HDMISCART
2
SCART Cable
(not included)
3
1. Connecting to a TV with an Optical Cable
Use an Optical cable (not included) to connect between the DVD player’s OPTICAL
socket and the TV’s OPTICAL IN socket.
2. Connecting to a TV with an HDMI Cable
Use an HDMI cable (not included) to connect between the DVD player’s HDMI socket
and the TV’s HDMI IN socket.
3. Connecting to a TV with a SCART Cable
Use a SCART cable (not included) to connect between the DVD player’s SCART socket
and the TV’s SCART IN socket.
Connecting to the Mains Socket
1. After all connections are properly completed, connect the
mains cable into the mains socket. Never make or change
any connections when the DVD player is connected to the
mains socket.
2. Press the POWER button on the DVD player or remote
control to turn the DVD player on.
13
Using a USB Device
You can play or view les from a USB device.
1. Connect the USB device directly to the USB slot on the DVD player.
2. Press the SOURCE button on the remote control to enter USB page.
3. Press the button to select the desired le, and then press the ENTER button to start
playback.
4. To exit USB mode, press the SOURCE button to enter DVD mode, or remove the USB
device from the unit.
If there is no disc in the unit and it is connected with a USB device, the unit will
automatically switch into USB mode when it is switched on.
14
Compatible Disc Types
DVD+R
Disc TypesDisc LogoRecorded Content
DVD-VIDEO (Digital Versatile Disc)AUDIO + VIDEO
DVD±RW (Audio/Video format or JPEG les)
DVD±R (DVD Recordable - Audio/Video
format or JPEG les)
CD-R (CD Recordable - Audio/Video format or
JPEG les)
CD-RW (CD-Rewritable - Audio/Video format
or JPEG les)
DVD+ReWritable
AUDIO (MP3) + JPEG
AUDIO (MP3) + JPEG
AUDIO (MP3) + JPEG
AUDIO (MP3) + JPEG
AUDIO-CD (Compact Disc Digital Audio)AUDIO
Supported Formats
JPEG
• The le extensions has to be .jpg and not .jpeg
• Pictures encoding must comply with JPEG format.
Some recorded les may not be playable due to its le type, or formatting, or the
condition of its recording.
Region Code
Both the DVD player and the discs are coded by
region. These regional codes must match in order
to play the disc. If the codes do not match, the disc
will not play.
The Region Number for this DVD player is
described on the rear panel of the DVD player.
Disc TypeDVD-VIDEO
Region code
15
Powering ON/OFF
When you rst connect the unit to the mains socket, the
unit will be in ON mode. The unit’s display will show “HI”,
and then “LOAD”.
• The LOGIK DVD logo (start-up picture) will appear on
the TV’s screen and the unit will start loading the disc
automatically (if available).
The unit will show “NDIS“ if it detects no disc in
the unit.
• Press the POWER button on the unit or the remote control to switch the unit back to
OFF mode. The display will show “OFF” and then turn o.
• When the unit is in OFF mode, press the POWER button on the unit or the remote
control to switch on the unit.
• Disconnect the mains plug from the mains socket if you want to switch the unit o
completely.
Basic Playback
Basic DVD Playback
1. Press the OPEN/CLOSE button to open the disc tray. Place a disc into the disc tray
with the label facing up.
• For double-sided disc, load the side you want to play face down.
• There are two dierent disc sizes. Place the disc in the correct guide on the disc tray.
If any part of disc is placed outside of the guide, the disc may be damaged and the
DVD player may malfunction.
• Do not place an unplayable disc in this DVD player.
2. Press the OPEN/CLOSE button to close the disc tray. The playback will automatically
start.
• Some discs may not playback automatically. You can press the PLAY/PAUSE
button to start playback.
3. Depending on the disc, a menu may appear on the TV screen by pressing the MENU
button. Press the button on the remote control to select menu options and
press the ENTER button to start, or press digits to select a menu option directly.
“ ” may appear on the screen during operation. “ ” means that the desired
operation is not permitted by the unit or disc.
• The screen saver will automatically activate after 5 minutes of no activity. Press
any button to exit the screen saver.
• If there is no-activity in screen saver mode after 20 minutes, the unit will
automatically turned o.
16
Pause Playback
1. Press the PLAY/PAUSE button on the unit or remote control to pause playback.
2. Press the PLAY/PAUSE button again on the unit or remote control to resume normal
playback.
Volume Adjustment
1. Press the VOLUME+/– button on the remote control to adjust the volume.
2. Press the MUTE button on the remote control to switch the sound o, the “ ” icon
will show on the display. Press the MUTE button on the remote control again or the
VOLUME+/– button on the remote control to cancel this function.
Selecting Chapter / Title time / Chapter time
1. Press the SEARCH button repeatedly on the remote control to display the disc
information text line for Chapter / Title time / Chapter time.
2. Press the 0-9, 10+ button on the remote control to enter valid Chapter / Title time /
Chapter time number. The playback skips to the selected Chapter / Title time / Chapter
time.
Stop Playback
1. Press the STOP button on the unit or remote control to go to pre-stop mode. With
some discs, the DVD player can recall the stopped location, such as on DVDs.
2. Press the PLAY/PAUSE button on the unit or remote control to resume playback from
the location where playback was stopped or from the beginning of the disc.
3. Press the STOP button twice to stop completely.
Previous and Next Chapter
1. Press the button on the remote control to go to the previous chapter. Each press of
this button will skip a chapter until the start of the disc.
2. Each press of the button on the remote control during playing will skip the current
chapter and play the next one.
Fast Rewind and Fast Forward
1. Press the button on the remote control to fast rewind / fast forward through the
disc. Each time the button on the remote control is pressed, the fast rewind / fast
forward motion speed changes. There are 5 speeds: ×2, ×4, ×8, ×16 and ×32.
2. Press the PLAY/PAUSE button on the unit or the remote control to resume normal
playback.
Step
1. Press the STEP button on the remote control repeatedly to play the movie frame by
frame.
2. Press the PLAY/PAUSE button to resume normal playback.
17
Repeat Mode
Press the REPEAT button on the remote control repeatedly to select dierent repeat
modes.
ActionDVD DescriptionCD DescriptionUSB/JPEG Disc
First PressRepeat ChapterRepeat TrackShuffle
Second PressRepeat TitleRepeat AllRandom
Third PressRepeat AllRepeat offSingle
Fourth PressRepeat off–Repeat one
Fifth Press––Repeat folder
Sixth Press––Folder
Slow
Press the SLOW button on the remote control when a DVD is playing to enter slow
playback. Each time you press the SLOW button on the remote control, the playback speed
changes in the following sequence:
1/2
1/4
1/8
1/16
Normal
1/16
1/8
1/4
1/2
Angle Selection
Some DVDs contain scenes which have been shot from a number of dierent angles. For
these discs, the same scene can be viewed from each of these dierent angles.
1. While you are playing a DVD with dierent
angles recorded, press the ANGLE button
on the remote control to view the number
of current angles available.
2. Press the ANGLE button repeatedly on the
remote control to change the scene to the
next recorded angle.
a) After approximately two seconds,
playback will continue from the new
angle you selected.
• This function can only be used for discs on which scenes shot from multiple
angles have been recorded.
• If only one angle is recorded, “
” is displayed.
Sequence of angle shots
(Example)
2
Audio Channel
Press the AUDIO button on the remote control repeatedly to select dierent audio
languages.
18
Subtitle Language
Press the SUBTITLE button on the remote control repeatedly to switch between dierent
subtitle languages that are available on the disc.
Info
You can view disc information (such as current title / chapter / track number, total playing
time or remaining time on the disc) without interrupting the disc playback.
During playback, press the OSD button on the remote control to show the available disc
information.
Programmable Memory
DVD, CD• Press the PROG button on the remote control to display the
PROGRAM MENU. Press the 0-9, 10+ button on the remote
control to input the title/chapter/track number and then press the
button on the unit or the remote control to select START.
• To resume normal playback, press the PROGRAM button and
press the button on the unit or remote control to select STOP.
Zoom Selection
This function allows you to enlarge or shrink the video image or picture on the screen.
During playback, press the ZOOM button repeatedly to zoom in/out the picture. (2× size,
Press the TITLE button on the remote control to return to the DVD title menu.
Menu
Press the MENU button on the remote control to return to the DVD main menu.
A-B Repeat
Repeat a section between points A and B within a Title / Chapter / Track.
1. Press the A-B button on the remote control to choose a starting point A.
2. Press the A-B button again to set an ending point B and complete the setting.
3. The selected section A-B will be repeated. Press the A-B button the third time to cancel
and exit.
Clear
Press the CLEAR button on the remote control to clear the input number in SEARCH or
PROGRAM state.
19
CD/JPEG Disc Operation
Playing an Audio or a JPEG Picture CD
1. While in ON mode, press the OPEN/CLOSE button and the disc door will open.
2. Place the CD/JPEG disc with the label side up into the CD compartment, and then press
the OPEN/CLOSE button to close the disc door.
3. If an audio CD is inserted, playback will start automatically.
If a JPEG disc is inserted, File Browser Menu will show on the display.
• This unit can play CD, CD-R, CD-RW, JPEG discs.
• Press the button on the remote control to select track in CD, or press the
Number 0-9, 10+ button on the remote control to play a track.
• Press the button on the remote control to select a photo in JPEG disc, or press
the Number 0-9, 10+ button on the remote control to select a photo. Press the ENTER
button to start slideshow.
Some JPEG discs may not be viewable due to the conguration and
characteristics of the discs or condition of the recording.
Pause Playback
Press the PLAY/PAUSE button to start/pause/resume playback.
Stop Playback
• Press the STOP button to stop CD playback.
• Press the MENU button to stop slideshow playback and return to the File Browser
Menu.
Volume Adjustment
1. Press the VOLUME+/– button on the remote control to adjust the volume.
2. Press the MUTE button on the remote control to switch the sound o. Press the MUTE
button on the remote control again or the VOLUME+/– button on the remote control to
cancel this function.
Selecting DISC GOTO / TRACK GOTO / SELECT TRACK
1. During CD playback, press the SEARCH button on the remote control to display the disc
information text line for DISC GOTO / TRACK GOTO / SELECT TRACK.
2. Press the 0-9, 10+ button on the remote control to enter valid Disc time / Track time /
Track number. The playback skips to the selected Disc time / Track time / Select track.
Previous and Next
Press the button on the remote control to playback the previous/next track or
photo.
20
Fast Rewind and Fast Forward
1. Press the button on the remote control to fast rewind / fast forward through the
disc. Each time the button on the remote control is pressed, the fast rewind / fast
forward motion speed changes. There are 5 levels of speed available: ×2, ×4, ×8, ×16 and
×32.
2. Press the PLAY/PAUSE button to resume normal playback.
Image Rotation
There are four modes to rotate a picture: “Invert”, “ Mirror”, Rotate Clockwise”, and “Contrarotate”. These operations are allowed only when a picture is being displayed normally and
will be cancelled automatically when a new picture is displayed. The arrow keys are used to
select the dierent rotation modes:
1. Press the ZOOM button once to enter zoom function. Press the button to select
dierent zoom level between 50% to 200%.
2. Press the button on the remote control to navigate in the enlarged picture.
3. To resume normal viewing and continue slide-show by pressing the ZOOM button.
During zoom function, slide-show transition and image rotation are disabled.
Slide-show Eect
Press the PROG button to select dierent style of photo transition while playing a
slideshow.
Thumbnail Menu
1. While browsing an image in JPEG disc, press the STOP button to show the thumbnail
menu for photo preview.
2. Press the button on the remote control to select a photo. Press ENTER button
to start the slideshow.
Quality of the pictures displayed on the screen is highly dependent on the
viewing device.
21
Customising the General Settings
1. Press the SETUP button to display the setup menu.
2. Press the button to select GENERAL
SETUP PAGE.
3. Press the button to select the
following options and then press the
button to change the setting. Press
button on the unit or the remote control,
or ENTER on the remote control to
conrm.
TV DISPLAYTo select the aspect ratio of the playback picture:
4:3 PANSCAN
If you have a conventional TV and want both
sides of the wide picture to be trimmed or
formatted to t your TV screen.
4:3 LETTERBOX
If you have a normal TV. A wide picture with
black bands on the upper and lower portions
of the TV screen will be displayed.
- - GENERAL SETUP PAGE - -
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
AUTO STANDBY
GOTO GENERAL SETUP PAGE
Wide
ON
ENG
ON
ON
OFF
ONOFF
ONOFF
ENGLISHFRENCHGERMANITALIANSPANISHPORTUGUESE
ONOFF
4:3 PANSCAN4:3 LETTERBOX16:9WIDE SQUEEZE
16:9
Wide screen display.
ANGLE MARKIf this is turned on, the multi-angle logo with the number of
available angles will be displayed when playing a DVD that
oers multiple angles.
OSD LANGUAGEAllows you to select the setup menu and OSD language.
CLOSED
CAPTIONS
For hearing-impaired viewers, the programme can display
recorded explanatory captions.
SCREEN SAVER• Select ON to display the screen saver. A moving DVD
logo appears on a dark screen to prevent screen burn
when disc playback is stopped, paused, or you have not
used the DVD player or its remote control for more than 5
minutes when the power is still on.
• Select OFF to turn o the screen saver function.
LAST MEMORY• Select ON to activate the last memory function. This
function is convenient when you want to continue viewing
a disc from the point where you were last watching it.
Unlike the resume function, the last memory function is
effective even if the DVD disc has been removed from the
DVD player.
• Select OFF to turn off the last memory function.
22
AUTO STANDBY• Select 3 HOURS or 4 HOURS to set the idle length.
While idling, a pop up warning window will
display for 10 seconds before the unit turns
itself o. Press any button to extend the time.
• Select OFF to turn o the auto standby function.
4. Press the SETUP button to exit the menu.
Customising the Audio Settings
1. Press the SETUP button to display the
setup menu.
2. Press the button to select ANALOG AUDIO SETUP PAGE.
3. Press the button to select the
following options and then press the
button to change the setting. Press
button on the unit or the remote control,
or ENTER on the remote control to conrm.
- - ANALOG AUDIO SETUP PAGE - -
DIGITAL OUTPUT
DOWNMIX
DOLBY DIGITAL
GOTO SPEAKER SETUP PAGE
STR
DUAL MONO STRDYNAMIC
-
-
-
-
-
-
-
-
-
FULL
-
-
-
-
-
-
-
-
OFF
-
-
STRL-MONOR-MONOMIX-MONO
SPDIF/OFFSPDIF/RAWSPDIF/PCM
LT/RTSTEREO
DIGITAL OUTPUTSelect the SPDIF Output.
• SPDIF Off
Turns off the SPDIF output.
• SPDIF/RAW
If you have connected your DIGITAL AUDIO OUT to a
multi-channel decoder/receiver.
• SPDIF/PCM
Only if your receiver is not capable of decoding multichannel audio.
DOWNMIXAllows you to set the stereo analogue output of your DVD
player.
• LT/RT
Select this option if your DVD player is connected to a
Dolby decoder.
• STEREO
Select this option to change channel output to stereo
which delivers sound from only the two front speakers.
DOLBY DIGITAL• DUAL MONO
If your amplifier / decoder has Dolby Digital output, you
may select STEREO, L – MONO, R – MONO, or MIX MONO
mode for your amplifier decoder.
• DYNAMIC
Dynamic range compression.
4. Press the SETUP button to exit the menu.
23
Customising the Video Settings
1. Press the SETUP button to display the
setup menu.
2. Press the button to select VIDEO
SETUP PAGE.
3. Press the button to select the
following options and then press the
button to change the setting. Press
button on the unit or the remote control,
or ENTER on the remote control to conrm.
VIDEO OUTPUTPress the button to select between RGB or OFF.
RESOLUTIONSelect the resolution output (480i, 480p (720), 720P (60Hz),
COLOR SETTINGEnter and then set the level of SHAPRNESS, BRIGHTNESS,
CONTRAST, HUE and SATURATION.
HDMI SETUPHDMI: ON/OFF
- - VIDEO SETUP PAGE - -
VIDEO OUTPUT
RESOLUTION
COLOR SETTING
HDMI SETUP
GOTO VIDEO SETUP PAGE
OFF
AUDIO Source: Auto/PCM
DEEP_COLOR: 24BIT/30BIT/36BIT
4. Press the SETUP button to exit the menu.
24
Customising the Preferences
1. The preference setting is only active when
there is no disc in the DVD player or the
DVD player is in STOP mode. The setting
will be saved and eective whenever the
DVD player is turned on.
2. Press the SETUP button to display the
setup menu.
3. Press the button to select PREFERENCE PAGE.
4. Press the button to select the following options and then press the button to
change the settings. Press button on the unit or the remote control, or ENTER on the
remote control to conrm.
TV TYPESelect the colour system that corresponds to your TV when
connecting to your TV’s AV outputs. This DVD player is compatible
with both NTSC and PAL.
PAL: Select this if the connected TV uses the PAL system. It will
change the video signal of an NTSC disc and output in PAL format.
Auto: Change the video signal output automatically according to
the selected disc’s format.
NTSC: Select this if the connected TV uses the NTSC system. It will
change the video signal of a PAL disc and output in NTSC format.
AUDIOAllows you to choose the preferred audio language of your disc. If
the preferred language is not available on the disc, the DVD player
will automatically use the DVD disc’s default language.
SUBTITLEAllows you to choose the preferred subtitle language of your disc. If
the preferred language is not available on the disc, the DVD player
will automatically use the DVD disc’s default language.
DISC
MENU
Allows you to choose the preferred menu language of your disc. If
the preferred language is not available on the disc, the DVD player
will automatically use the DVD disc’s default language.
25
PARENTALThis feature allows you to block disc playback with specic ratings.
The rating levels are from 1 to 8 and are country dependent. You
can prohibit the playing of certain discs that are not suitable for
your children, or you can have certain discs played with alternative
scenes.
The parental lock levels are equivalent to the following ratings:
1 : KID SAFE 2 : G 3 : PG 4 : PG 13
5 : PGR 6 : R 7 : NC17 8 : ADULT
• Unlock the disc by entering the 4-digit password you have set in
PASSWORD setup at the PASSWORD SETUP PAGE.
• If you change the control level, you must input the password.
(Initial password : 1369)
• In case you forget your password, the master password is “1369”.
• To disable the parental control and allow the DVD player to play
all discs, select ADULT.
• Use the 0-9 button to enter the 4-digit password again.
• DVD discs that are rated above the selected level will not be
played unless the 4-digit password is entered.
Tips
The following disc types will not be aected by the Parental Control
feature:
• Discs that are not coded by the disc manufacturer.
• Discs that are not coded by the disc manufacturer despite having
a movie rating printed on the disc cover.
• CDs as they have no rating level indication.
• Most copied DVD discs or illegal DVDs.
DEFAULTResets all to the manufacturer’s original settings for this DVD player.
The parental lock setting will not be reset.
5. Press the SETUP button to exit the menu.
26
Customising the Password Settings
1. Press the SETUP button to display the
setup menu.
2. Press the button to select PASSWORD SETUP PAGE.
3. Press the button to select the
following options and then press the
button to change the setting. Press
button on the unit or the remote control,
or ENTER on the remote control to conrm.
- - PASSWORD SETUP PAGE - -
PASSWORD MODE
PASSWORD
GOTO PASSWORD SETUP PAGE
ON
ONOFF
PASSWORD
MODE
Sets the password mode ON/OFF. If set to OFF, changing parental
levels will not activate a password check.
PASSWORDA 4-digit password will be required to play a prohibited disc.
If the disc is locked and the system prompts you to enter the
password:
1. Use the 0-9 button to input the current password in the OLD PASSWORD box (if the password has not yet been reset or set
even after purchasing this unit, it is “1369”).
a) In case you forget your password, the master password is
“1369”.
2. Press the number buttons to input the new password in the
NEW PASSWORD box.
3. Enter the new password again in the CONFIRM PWD box.
4. The cursor will automatically jump to the OK button, press the
ENTER button to conrm the setting.
5. Press the SETUP button to exit the menu.
27
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
Handling Discs
• Do not touch the playback side of the disc.
• Do not attach paper or tape to the disc.
Playback side
Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc
from the centre outwards with a soft cloth. Always keep the disc clean.
• If you cannot wipe o the dust with a soft cloth, wipe the disc lightly with a slightly
moistened cloth and nish with a dry cloth.
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners
or antistatic spray. They may damage the disc.
Storing Discs
• Do not store discs in places subjected to direct sunlight or near heat sources.
• Do not store discs in places subjected to moisture and dust such as a bathroom or near
a humidier.
• Storing discs vertically in a case, stacking discs or placing objects on discs outside of
their cases may cause warping.
28
Hints and Tips
PROBLEMSOLUTION
No operation can be
performed with the
remote control.
Disc does not play.• Ensure that the disc is installed with the label side facing up.
Disc Menu does not
appear.
No power.• Press the OPEN/CLOSE button on the unit or the remote
The picture is
distorted or turns
black and white
during colour
playback.
• Check the batteries in the remote control. They may need
replacing.
• Operate the remote control at a distance of no more than 6m.
• Removes batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall batteries and try to operate the
remote control again.
• Check the region number of the DVD.
• Check if the disc has a Menu.
control to turn the unit on.
• Make sure the mains socket has power.
• The disc does not match with the TV colour system standard
(PAL/NTSC).
• The disc is dirty. Clean the disc.
• Sometimes a small amount of picture distortion may appear.
This is not a malfunction of the unit.
The screen aspect
ratio cannot be
changed.
No audio.• Make sure you have securely connected the DVD player and
Not able to select
some items in the
setup/ system
menu.
• The Screen Aspect Ratio is xed on your DVDs.
• Depending on the TV, it may not be possible to change the
Screen Aspect Ratio.
• This is not a problem with the DVD player.
other devices.
• Make sure the TV and the amplier are in good condition and
are setup properly.
• Press the STOP button twice before selecting the setup/
system menu.
• Depending on the disc availability, some menu items cannot be
selected.
29
PROBLEMSOLUTION
The DVD player
does not start the
playback.
Picture freezes
momentarily during
playback.
The unit switches
o when it has
been idle for a few
minutes
• Insert a readable disc with the playback side facing down.
• Check the disc type, colour system (PAL/NTSC) and region code.
• Check for any scratches or smudges on the disc.
• Press SETUP button to turn o the setup menu .
• Enter the password in order to change the parental rating level
or to unlock the disc for playback.
• Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
• Disconnect the mains cable from the mains socket for a few
minutes. Reconnect the mains cable and try to operate the DVD
player.
• Check the disc for ngerprint or scratches, and clean with a soft
cloth wiping from centre to edge.
• If there is no-activity after 20 minutes, the unit will automatically
enter standby mode. Press the button on the unit or the
remote control to switch on the unit.
Specications
ModelL2HDVD17
PowerAC 100V - 240V, 50/60Hz
Power Consumption
(in Standby mode)
VF Signal SystemPAL/NTSC
Power Consumption<10W
Operating
Temperature
Dimensions322 mm (W) × 250 mm (D) × 45 mm (H)
Unit Weight1118 g
Features and specications are subject to change without prior notice.
<0.5 W
5°C to 35°C
30
For general information about appliance
and handy hints and tips, please visit:
www.TeamKnowHow.com/discover
or call 0344 561 1234
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.
With over 1 million spares and accessories available we can deliver direct to your door
the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only).
Calls charged at National Rate.
The symbol on the product or its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help conserve
natural resources and ensure that it is recycled in a manner that protects human health and the
environment.
For more information about where you can drop o your waste for recycling, please contact your
local authority, or where you purchased your product.
Rovi Proprietary Rights
This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
Restriction on Use & Rovi Trade Mark Rights
Use of the copyright protection technology contained in this product must be authorised by
Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise
authorised by Rovi Corporation. The names “Rovi Corporation” and “Macrovision” are protected by
trademarks.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To
preserve our environment, dispose of used batteries according to your local laws or regulations.
Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you purchased the
product.
The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries.
All trademarks are the property of their respective owners and all rights are acknowledged.
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
IB-L2HDVD17-171012V1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.