How it Works
Logik
Loading...
L26DVDB21
Instruction Manual
68 pgs19.66 Mb0

Logik L26DVDB21 Instruction Manual

26” LCD HD Ready 1080p TV with DVD Player
Instruction Manual L26DVDB21
L26DVDB21_IB_111004_Annie.indd 1 11年10月4日 下午5:55
L26DVDB21_IB_111004_Annie.indd 2 11年10月4日 下午5:55
Contents
Unpacking the TV ...............................................................................................................................................................................................................5
Installing / Removing the Base Stand .........................................................................................................................................................................6
Front View and Controls ...................................................................................................................................................................................................7
Rear View and Sockets ......................................................................................................................................................................................................8
Installing Batteries in the Remote Control ................................................................................................................................................................9
Remote Control Operation Range ................................................................................................................................................................................9
Remote Control .................................................................................................................................................................................................................10
Connections ......................................................................................................................................................................................13
Making Video and Audio Connections .....................................................................................................................................................................13
Connecting an AV Device with an HDMI Cable .....................................................................................................................................................13
Connecting a Computer with a VGA Cable .............................................................................................................................................................14
Connecting an AV Device with a Component (YPbPr) Cable ...........................................................................................................................14
Connecting an AV Device with a SCART Cable ......................................................................................................................................................15
Connecting an AV Device with Composite Cable .................................................................................................................................................15
Turning the TV on for the First Time ..........................................................................................................................................................................16
− Selecting the Input Source................................................................................................................................................................................17
− Channel Selection ...............................................................................................................................................................................................17
− Display Channel Information ...........................................................................................................................................................................17
− Volume Adjustment .............................................................................................................................................................................................17
Channel Setting (TV, DTV or Radio Mode) ...............................................................................................................................................................18
− Auto Tuning ............................................................................................................................................................................................................18
− DTV Manual Tuning..............................................................................................................................................................................................19
− ATV Manual Tuning ..............................................................................................................................................................................................19
− Channel Edit (ATV / DTV Mode) ...................................................................................................................................................................... 20
− Signal Information (DTV Mode) .......................................................................................................................................................................21
− CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 22
− Software Update (Over Air Download)........................................................................................................................................................ 23
− Software Update (USB) ...................................................................................................................................................................................... 23
Picture Setting .................................................................................................................................................................................................................. 24
Sound Setting ................................................................................................................................................................................................................... 26
− Stereo / Dual Sound Reception (ATV Mode) .............................................................................................................................................. 27
Time Settings..................................................................................................................................................................................................................... 27
Option Setting .................................................................................................................................................................................................................. 28
− OSD Language ......................................................................................................................................................................................................28
− Audio Language (DTV Mode) .......................................................................................................................................................................... 29
− Subtitle Language (DTV Mode) ......................................................................................................................................................................30
− Hearing Impaired ................................................................................................................................................................................................. 30
− Country .................................................................................................................................................................................................................... 30
− PVR File System (DTV Mode) .............................................................................................................................................................................31
− CEC (Consumer Electronics Control) ............................................................................................................................................................ 32
− Restore Factory Default ..................................................................................................................................................................................... 32
LOCK Setting ...................................................................................................................................................................................................................... 33
− Lock System ........................................................................................................................................................................................................... 33
− Set Password ......................................................................................................................................................................................................... 34
− Block Channel ....................................................................................................................................................................................................... 35
− Parental Guidance ............................................................................................................................................................................................... 36
L26DVDB21_IB_111004_Annie.indd 3 11年10月4日 下午5:55
Using the Features ...........................................................................................................................................................................37
EPG (Electronic Programme Guide) (DTV Mode) .................................................................................................................................................37
− Switch On / O EPG ............................................................................................................................................................................................. 37
− Select a Programme ........................................................................................................................................................................................... 37
Teletext (ATV Mode) ........................................................................................................................................................................................................ 38
− To Turn on Teletext Function........................................................................................................................................................................... 38
Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 39
− Teletext within Digital Service ........................................................................................................................................................................ 39
Entertainment ..................................................................................................................................................................................40
Connecting a USB Storage Device ............................................................................................................................................................................. 40
Viewing Photos ................................................................................................................................................................................................................. 40
Listening to Music .............................................................................................................................................................................................................41
Viewing Movies ................................................................................................................................................................................................................ 42
Viewing Texts .................................................................................................................................................................................................................... 42
Time Shift Function .........................................................................................................................................................................................................44
Recording DTV Programme onto a USB Storage Device .................................................................................................................................. 45
Timer Programming ....................................................................................................................................................................................................... 45
Play Recorded Programme .......................................................................................................................................................................................... 46
Using the Built-in DVD Player ...................................................................................................................................................................................... 47
Compatible Disc Types .................................................................................................................................................................................................. 47
− Supported Formats ............................................................................................................................................................................................. 47
− Region Code .......................................................................................................................................................................................................... 47
Basic DVD Playback Functions ....................................................................................................................................................................................48
− Playing the DVD ................................................................................................................................................................................................... 48
− Menu Playback (for DVD) ..................................................................................................................................................................................48
− Stopping Playback ............................................................................................................................................................................................... 48
− Previous / Next (for DVD / CD / Multimedia discs) .................................................................................................................................. 48
− Forward / Backward (for DVD / CD / Multimedia discs) ......................................................................................................................... 48
− Pause (for DVD / CD / Multimedia discs) ..................................................................................................................................................... 48
− Repeat (for DVD / CD / Multimedia discs) ................................................................................................................................................... 48
− Display (for DVD / Multimedia discs) ............................................................................................................................................................ 49
− Goto (for DVD / CD / Multimedia discs) ....................................................................................................................................................... 49
− Audio (for DVD / CD) ........................................................................................................................................................................................... 49
− Repeat A-B (for DVD / CD).................................................................................................................................................................................49
Program (for DVD) ...........................................................................................................................................................................................................49
Playing Multimedia Discs .............................................................................................................................................................................................. 50
Using the DVD Language Setup Page...................................................................................................................................................................... 52
Using the DVD Video Setup Page .............................................................................................................................................................................. 52
Using the DVD Rating Setup Page ............................................................................................................................................................................. 53
− Parental Control ................................................................................................................................................................................................... 53
− Set Password ......................................................................................................................................................................................................... 54
Using the DVD Misc Setup Page ................................................................................................................................................................................. 54
YPbPr Mode ....................................................................................................................................................................................................................... 58
PC Mode ..............................................................................................................................................................................................................................58
HDMI Mode .......................................................................................................................................................................................................................58
Specifications ...................................................................................................................................................................................59
L26DVDB21_IB_111004_Annie.indd 4 11年10月4日 下午5:55
GB
5
Preparation
Unpacking the TV
Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Remote Control / AAA Batteries x 2
(P.N.: 504C2436103 & 32200007158)
Screws x 4
(P.N.: 209030427B1)
Thank you for purchasing your new Logik 26” LCD HD Ready 1080p TV with DVD Player.
Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
Preparation
TV
Base Stand
(P.N.: 102C2611111)
Instruction Manual
(P.N.: 4031C261258)
Quick Start Guide
(P.N.: 4033C261213)
Digital TV Switchcover Addendum
(P.N.: 4031C241307)
L26DVDB21_IB_111004_Annie.indd 5 11年10月4日 下午5:55
GB
6
Preparation
4. To remove the base stand, lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. Untighten the 4 screws that hold the base stand to the rear of the TV. Slide the base stand out.
1. Disconnect all cables connected to the TV.
2. Lay the TV down on a flat surface with the back side
facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3. To install the base stand, slide in the base stand until the screw holes are aligned. Secure the base stand with the 4 screws.
5. Mounting on the wall. This TV is designed to be wall­mounted with a standard 200 mm x 100 mm mounting kit designed for flat-panel TVs (sold separately). Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to page 13-15 & page 40 for details) before mounting on to the wall.
Keep all the screws. You will need them if
you want to use the base stand option.
Remove the base stand before mounting the TV onto the wall.
unscrew
Slide in
screw
Installing / Removing the Base Stand
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with
it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Screws x 4
(P.N.: 209030427B1)
Screws x 4
(P.N.: 209030427B1)
200 mm
100 mm
Four mounting holes
(size M4x27 screw)
L26DVDB21_IB_111004_Annie.indd 6 11年10月4日 下午5:55
GB
7
Preparation
Front View and Controls
Item Description
1 POWER LED
Illuminates green when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will flash green and red when the timer programming has started in the standby mode.
2 IR (Infrared Receiver)
Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected.
3
/
Press to skip to the beginning of the previous or next chapter / track / photo. (DVD mode)
4
Press to stop playback. (DVD mode)
5
Press to start playback or pause. (DVD mode)
6
Press to eject disc. (DVD mode)
7 SOURCE
Press to select among different input signal sources: DTV / ATV / SCART / YPbPr / PC / HDMI1 / HDMI2 / AV1 (REAR) / AV2 (SIDE) / DVD / DMP.
8 MENU Displays the OSD (on screen display) menu.
9 CH + / – Press to select a channel or select a sub-menu from the OSD menu.
10 VOL + / –
Adjusts the volume. Press to select and adjust a setting in the OSD menu.
11
Switches the TV on from standby mode. Switches the TV back to standby mode.
7
8
10
11
9
1 2
4
5
6
3
L26DVDB21_IB_111004_Annie.indd 7 11年10月4日 下午5:56
GB
8
Preparation
Rear View and Sockets
VGA I NPUT
RF INP UT
PC
AUDIO INPUT
SCAR T
100- 240V~ 50/60 Hz
AC-I NPUT
HDMI 1
HDMI 2
Item Description
1 Power ON/OFF button Press the POWER ON/OFF button to turn the TV to standby or off mode.
2 USB
Allows the insertion of a USB storage device to play video, audio, photo and text files (DMP mode) and record DTV programmes on to a USB storage device.
3 AV2 VIDEO / AUDIO (L/R)
To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.
4 AC~INPUT Connects the mains cable to the mains socket.
5 HDMI1 / HDMI2
To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver.
6 AV1 VIDEO / AUDIO (L/R)
To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.
7 Y, PB, PR / AUDIO (L/R)
To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets.
8 VGA INPUT / PC AUDIO To connect to a computer or other devices with a VGA interface.
9 COMMON INTERFACE Allows the insertion of a Common Access Module. (Refer to page 22 for details)
10 SCART To connect to a VCR, DVD Player, or other AV device with a SCART output socket.
11 RF INPUT To connect to the aerial socket on the wall with the RF coaxial cable.
4 5
7 9 10
6 8 11
Video
AV2
L
R
USB
OFF ON
2
1
3
L26DVDB21_IB_111004_Annie.indd 8 11年10月4日 下午5:56
GB
9
Preparation
Remote Control Operation Range
Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. The operating distance may vary depending on the brightness of the room.
Installing Batteries in the Remote Control
1. Press and lift the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will not function. Replace both batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.
30° 30°
5M
L26DVDB21_IB_111004_Annie.indd 9 11年10月4日 下午5:56
GB
10
Preparation
1.
Switches the TV between on and standby mode.
2.
MUTE
Mutes and restores your TV sound.
3. 0-9 Number Button
• Press to select a programme.
• Select numbered items in a menu. (DVD mode)
4. LIST
• Display the channel list. (ATV / DTV mode)
• Display the text page on the teletext screen. (ATV mode)
5.
RECALL
• Return to the previous viewing channel. (ATV / DTV mode)
• Return to menu (DVD mode)
6. SLEEP
Sets the TV sleep timer: OFF / 10 / 20 / … / 180 / 240 min.
7. VOL + / –
Adjusts the volume.
8. CH + / –
Select a channel.
9. PROG
• Display the channel edit menu. (ATV / DTV mode)
• Programme the DVD. (DVD mode)
10. S.MODE
Select sound mode: Standard / Music / Movie / Sports / User.
11. ASPECT
Allows you to watch the screens in various formats: Auto / 4:3 / 16:9 / Zoom / Subtitle / Smart Zoom / Dot to Dot.
12. GUIDE
Displays the EPG electronic Programme guide. (DTV mode)
TITLE
Displays the DVD title content. (DVD mode)
13. P.MODE
Select picture mode: Standard / Mild / User / Dynamic.
14. MENU
Display the OSD (On Screen Display) menu.
15. INPUT
Select among the dierent input signal sources: DTV / ATV / SCART / YPbPr / PC / HDMI1 / HDMI2 / AV1 (REAR) / AV2 (SIDE) / DVD / DMP
16.
Allows you to navigate the OSD menus and adjust the system settings to your preference.
OK
Conrm the selection in the OSD menus.
17. BACK
Return to the previous menu in the OSD menus.
18. Exit
Exit the OSD menu.
Remote Control
1
2
5
8
12
15
18
9
13
3
4
7
11
14
16
17
6
10
L26DVDB21_IB_111004_Annie.indd 10 11年10月4日 下午5:56
GB
11
Preparation
19. FAV
Display the favourite channel list. (ATV / DTV mode)
SETUP
Display and exit the DVD setup menu. (DVD mode)
20. i
Display the present screen information such as the current channel on ATV / DTV mode and the input source except ATV / DTV mode.
21. TV.RD
To switch input source to TV / Digital radio channels. (DTV mode)
Eject a disc. (DVD mode)
22. AD (Audio Description)
• To turn on / o the Audio Description (AD) function (only applicable when the TV programme has this feature). (DTV mode)
• Select dierent Audio mode on DVD mode. (DVD mode)
• Select Stereo / Dual Sound Reception. (ATV mode)
23. TEXT
Turns on and o the teletext function. (ATV / DTV mode)
MENU
Display the DVD menu. (DVD mode)
24. S (Subtitle)
• Displays subtitles which are broadcast with the programme. (DTV mode).
• Displays subtitles on the DVD. (DVD mode)
25.
REC
Record the current programme. (DTV mode).
ZOOM
Zoom in on the displayed frame. (DVD mode)
26.
Allows you to navigate the DVD menu and adjust the system settings to your preference. (DVD mode)
OK
Conrm the selection in the DVD menus. (DVD mode)
CANCEL
To exit the teletext mode. (ATV mode)
MIX
Select TELETEXT with a TV programme. (ATV mode)
SIZE
To enlarge the picture on the TV in teletext. (ATV mode)
27.
Stop
To stop the playback or recording. (DVD / DMP / DTV mode)
28. ANGLE
Select dierent angles for the video. (DVD mode)
29.
Pause
• To pause playback. (DVD / DMP mode)
• Start the time-shift function (DTV mode)
STEP
To play the playback forward frame by frame. (DVD mode).
30.
PLAY
To start playback. (DVD / DMP mode)
25
27 29
30
23
24
26
28
22
20
2119
L26DVDB21_IB_111004_Annie.indd 11 11年10月4日 下午5:56
GB
12
Preparation
31.
To skip to the beginning of the next chapter / track / photo.
REVEAL
Reveals hidden information such as the answer to a quiz in teletext. (ATV mode).
32.
To skip to the beginning of the previous chapter / track / photo.
HOLD
Freezes a multi-page passage on screen in teletext. (ATV mode)
33.
To reverse playback rapidly.
SUBPAGE
Displays the subpage on the teletext screen. (ATV mode)
34.
To advance playback rapidly.
INDEX
To select the page number of the index from teletext. (ATV mode)
35. Coloured buttons
Access the TELETEXT items or channel edit when using Digital / Freeview TV Channels. (ATV / DTV mode)
GOTO (RED)
To skip to a specic location on a DVD / CD. (DVD mode)
SLOW (GREEN)
Play video slow. (DVD mode)
REPEAT (YELLOW)
Select between dierent repeat modes. (DVD mode)
A–B (BLUE)
Repeat a segment between A and B. (DVD mode)
34
33
32
35
31
L26DVDB21_IB_111004_Annie.indd 12 11年10月4日 下午5:56
GB
13
Connections
Connecting an AV Device with an HDMI Cable
• This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection) Protocol.
• The TV has a total of 2 HDMI input sockets, please make sure the correct input source is selected corresponding to your connected HDMI input socket.
• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source.
• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p.
1. Use an HDMI cable to connect the TV’s HDMI input socket to the external AV device’s HDMI output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF button which is located at the rear side of the TV.
3. Press the
button on the right side panel of the TV
or on the remote control to turn on your TV.
4. Press the
button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select HDMI1
/ HDMI2 and then press the OK button to confirm.
Making Video and Audio Connections
Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures.
When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.
Signal Type
Separate Audio
Connection Required
HDM I
HDMI (480i/480p/576i/576p/720p/1080i/1080p)
No
VGA I NPUT
VGA
Yes
Component Video (480i/480p/576i/576p/720p/1080i/1080p)
Yes
SCA RT
SCART (RGB Input) No
Composite Video
Yes
Best Video Performance
Although this TV is able to connect to an HDMI device, it is possible that some devices may not operate correctly.
Connections
Rear Bottom View of TV
VGA INPU T
RF INPUT
PC
AUDIO INPU T
SCART
100-240 V~ 50/ 60Hz
AC-INPU T
HDMI 1
HDMI 2
HDMI Cable (not included)
Blu-ray Player / DVD Player /
Recorder
Set-top BoxGame Console
L26DVDB21_IB_111004_Annie.indd 13 11年10月4日 下午5:56
GB
14
Connections
Connecting an AV Device with a Component (YPbPr) Cable
1. Use a component cable to connect the TV’s YPbPr
input sockets to an external AV device’s component output sockets.
2. Use an AV cable to connect the TV’s AUDIO(L/R) input sockets to the external AV device’s component audio output sockets. (Audio Left = white, and Audio Right = red)
Component port on the TV Y Pb Pr
Video output ports on DVD player
Y Pb Pr Y Cb Cr
3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF button which is located at the rear side of the TV.
4. Press the
button on the right side panel of the TV
or on the remote control to turn on your TV.
5. Press the
button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select YPbPr
and then press the OK button to confirm.
Connecting a Computer with a VGA Cable
1. Use a VGA cable to connect the TV’s VGA input
socket to a computer’s VGA output socket. Use an audio cable to connect the TV’s PC AUDIO input socket to the computer’s audio output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF button which is located at the rear side of the TV.
3. Press the
button on the right side panel of the
TV or on the remote control to turn on your TV.
4. Press the
button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select PC and then press the OK button to confirm.
• The best resolution is 1920 x 1080.
• If your computer is set to shut down after a few minutes of idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the
button on the right side panel of the TV or on the remote control to restart the TV.
Rear Bottom View of TV
VGA INPU T
RF INPUT
PC
AUDIO INPU T
SCART
100-240 V~ 50/ 60Hz
AC-INPU T
HDMI 1
HDMI 2
Computer
VGA Cable
(not included)
Audio Cable
(not included)
Rear Bottom View of TV
VGA INPU T
RF INPUT
PC
AUDIO INPU T
SCART
100-240 V~ 50/ 60Hz
AC-INPU T
HDMI 1
HDMI 2
Satellite Receiver
Video Camera
Blu-ray Player / DVD Player /
Recorder
Set-top Box
Game Console
L
R
COMPONENT
OUT
Y
Pr
Pb
AV Cable (not included)
Yellow (Video)
Red (R)
White (L)
Yellow (Video)
Red (R)
White (L)
Component Cable
(not included)
Pb/Cb
Pr/Cr
Y
Pb/Cb
Pr/Cr
Y
L26DVDB21_IB_111004_Annie.indd 14 11年10月4日 下午5:56
GB
15
Connections
Connecting an AV Device with a SCART Cable
1. Use a SCART cable to connect the TV’s SCART input
socket to an external AV device’s SCART output socket.
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF button which is located at the rear side of the TV.
3. Press the
button on the right side panel of the TV
or on the remote control to turn on your TV.
4. The TV will change the input source to SCART automatically once the AV device is switched on.
Connecting an AV Device with Composite Cable
1. Use an AV cable to connect the TV’s
AUDIO(L/R) / VIDEO input sockets to the external AV device’s composite audio / video output sockets. (VIDEO = yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF button which is located at the rear side of the TV.
3. Press the
button on the right side panel of the TV or on the remote control to turn on your TV.
4. Press the
button on the right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the
buttons to select AV1
(REAR) / AV2 (SIDE) and then press the OK button to confirm.
Rear Bottom View of TV
SCART Cable
(not included)
VGA INPU T
RF INPUT
PC
AUDIO INPU T
SCART
100-240 V~ 50/ 60Hz
AC-INPU T
HDMI 1
HDMI 2
Satellite Receiver
VCR
DVD Player / Recorder
Set-top Box
VGA INPU T
RF INPUT
PC
AUDIO INPU T
SCART
100-240 V~ 50/ 60Hz
AC-INPU T
HDMI 1
HDMI 2
Satellite Receiver
Video Camera
VCR
DVD Player / Recorder
Set-top Box
Game Console
AV Cable (not included)
Yellow (Video)
Red (R)
White (L)
Yellow (Video)
Red (R)
White (L)
Rear Bottom View of TV
Video
AV2
L
R
USB
Rear Left Side of TV
AV Cable (not included)
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
Red (R)
White (L)
OR
L26DVDB21_IB_111004_Annie.indd 15 11年10月4日 下午5:56
16
GB
Initial Setup
2. Connect the mains cable to the mains socket after you have completed all the connections.
3. Switching on the POWER ON/OFF button which is located at the rear side of the TV. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.
4. In standby mode, press the
button on the right side panel of the TV or on the remote control to turn the TV on. The red LED indicator will turn green.
Do not connect the TV to the mains supply until you have completed all the connections.
6. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm.
OSD Language Select your desired language to be displayed on
the menu. The default on-screen menu language is set as English.
Country Select the country where you will operate the TV.
The default country is set as UK.
Dan sk
Deu tsch
Hrv atski
Ita liano
OSD L anguage
OK
Mag yar
Ned erlan ds
Nor sk
Pol skiEng lish
Ces ky
E k
Esp anol
~
Fra n ais
Por tugue s
Pyc ck
Fra nce
Gre ece
UK
Aus trali a
Aus tria
Cze ch
Den mark
Fin land
Cou ntry
OK
Bel gium
Bul garia
Cro atia
Hun gary
Ita ly
Lux embou rg
Ger many
Turning the TV on for the First Time
1. Connect one end of the RF coaxial cable to the
aerial socket on the wall and the other end of the cable to the RF (75Ω) socket at the rear bottom side of your TV.
5. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in
and then press the OK button. (If you have already installed the TV using the Quick Start Guide, please go to the “Selecting the Input Source” section on the next page.)
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the right side panel of the TV or on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug
from the mains socket.
Initial Setup
VGA INPU T
RF INPUT
PC
AUDIO INPUT
SCART
HDMI1
HDMI2
OR
RF coaxial cable (not included)
OFF ON
To the mains socket
L26DVDB21_IB_111004_Annie.indd 16 11年10月4日 下午5:56
17
GB
Initial Setup
7. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.
8. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the
button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.
9. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the Channel menu (refer to page 20-21 for details).
Selecting the Input Source
1. Press the button on the right side panel of the TV or the INPUT button on the remote control to display the Input source
list.
2. Press the
buttons to select the input source that you want: DTV / ATV / SCART / YPbPr / PC / HDMI1 / HDMI2 / AV1 (REAR) / AV2 (SIDE) / DVD / DMP.
3. Press the OK button to confirm your selection.
Alternative
Press the TV.RD button to switch to TV / digital radio channels directly. (DTV mode)
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 35 for details on Block Channel).
• Press the FAV button to view the Favourite List. Then use the
buttons to highlight and select the channel. Press the OK
button to view the selected channel (refer to page 20-21 for details on Channel Edit).
• Press the
button to return to the previously viewed channel.
Display Channel Information
• Press the i button to view the current information.
Volume Adjustment
• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
MUTE button. Press the MUTE button again or the VOL + button to resume
audio listening.
Input Source
OK
DMP
Input Source
OK
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
AV1 (REAR)
AV2 (SIDE)
DVD
Channel Tuning
TV : 3 Channel(s) DTV : 0 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)
36%... 668. 75 MH z (T V)
Please press MENU to skip.
L26DVDB21_IB_111004_Annie.indd 17 11年10月4日 下午5:56
18
GB
Customising TV Settings
4. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.
5. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.
6. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 20-21 for details).
3. In the Tune Type menu, press the
buttons to select ATV / DTV /
DTV + ATV. Press the
button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.
2. Press the
buttons to select Auto Tuning and then press the OK
button.
Channel Setting (TV, DTV or Radio Mode)
Auto Tuning
Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
Channel Tuning
TV : 3 Channel(s) DTV : 0 Channel(s) Radio : 0 Channel(s) Data : 0 Channel(s)
36%... 668. 75 MH z (T V)
Please press MENU to skip.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Aut o Tun ing
DTV Manu al Tu ning
ATV Manu al Tu ning
Sig nal I nform ation
CI Infor matio n
Sof tware Upda te(OA D)Off
Sof tware Upda te(US B)
Cha nnel Edit
Tun e Type D TV +ATV
UK
Austr al ia
Austr ia
Belgi um
Bulga ri a
Croat ia
Czech
Denma rk
Finla nd
MENU
Customising TV Settings
L26DVDB21_IB_111004_Annie.indd 18 11年10月4日 下午5:56
19
GB
Customising TV Settings
3. The DTV Manual Tuning screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.
4. Press the MENU button to return back to the main menu.
5. Press the EXIT button to exit the menu.
2. Press the
buttons to select ATV Manual Tuning and then press the
OK button.
2. Press the
buttons to select DTV Manual Tuning and then press the
OK button.
DTV Manual Tuning
Allows you to make manual fine tuning adjustments of the channel under DTV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Aut o Tun ing
DTV Manu al Tu ning
ATV Manu al Tu ning
Sig nal I nform ation
CI Infor matio n
Sof tware Upda te(OA D)Off
Sof tware Upda te(US B)
Cha nnel Edit
Aut o Tun ing
DTV Manu al Tu ning
ATV Manu al Tu ning
Sig nal I nform ation
CI Infor matio n
Sof tware Upda te(OA D)Off
Sof tware Upda te(US B)
Cha nnel Edit
DTV Ma nual Tuning
VHF CH 5
Bad N om al Go od
Press OK to sea rc h
ATV Manual Tuning
Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
L26DVDB21_IB_111004_Annie.indd 19 11年10月4日 下午5:56
20
GB
Customising TV Settings
a. Delete Press the RED button to delete the selected channel.
b. Rename (ATV channels) Press the GREEN button to rename the selected channel. Press
the
buttons to select the characters to represent the station
name. Press the
buttons to move to the next character and
then press the GREEN button again to confirm the new name.
3. A Channel Edit screen will pop up. Press the
buttons to select
the programme you want to edit.
2. Press the
buttons to select Channel Edit and then press the OK
button.
3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the
buttons to adjust the setting.
Storage To Presets the channel number.
Sound System
Selects the sound system: I / DK / BG / L (for SECAM).
Current CH Displays the current channel number.
Search
Press the
buttons to start the manual
tuning.
Fine-Tune
Press the
buttons to make manual fine
tuning adjustments.
Frequency Displays the current tuned frequency.
4. After finishing the manual tuning adjustment of a channel, press the RED button to save your channel before tuning the next channel.
5. Press the MENU button to return back to the main menu.
6. Press the EXIT button to exit the menu.
Channel Edit (ATV / DTV Mode)
Allows you to edit TV programmes in the Channel List.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
ATV Ma nu al Tuni ng
Storage To 1
Sound System I
Current CH 1
Search
Fine-Tune
Frequency 2 55 .2 5 MHz
Save ME NU
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Aut o Tun ing
DTV Manu al Tu ning
ATV Manu al Tu ning
Sig nal I nform ation
CI Infor matio n
Sof tware Upda te(OA D)Off
Sof tware Upda te(US B)
Cha nnel Edit
Channel Edit
OK
Delete Re name Move
Skip
FAV
MENU
800 SZTVM 01
DTV
800 SZTV M02
800 SZTV M03
800 SZTV M04
804 Date
1C- 51
2C- 53
3C- 61
DTV
DTV
DTV
DTV
ATV
ATV
ATV
All channels (DTV and ATV) are listed, please ensure that you edit the correct channel.
L26DVDB21_IB_111004_Annie.indd 20 11年10月4日 下午5:56
21
GB
Customising TV Settings
Care should be taken when editing the position of digital channels as this may affect EPG and reminder settings.
c. Move Press the YELLOW button and then press the
buttons to
move to the selected channel. Press the YELLOW button or the
OK button to conrm.
d. Skip Press the BLUE button to skip the selected channel. Press the BLUE
button again to undo it.
e. FAV (Favourite) Press the FAV button to set the selected channel as one of the
favourite programmes. Press the FAV button again to undo it.
4. Press the MENU button to return back to the main menu.
5. Press the EXIT button to exit the menu.
3. Press the BACK button to return to the previous menu or press the MENU button to return back to the main menu.
4. Press the EXIT button to exit the menu.
Signal Information (DTV Mode)
Allows you to view the signal information.
1. Press the MENU button and then press the
buttons to select the
CHANNEL menu and then press the OK button.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Aut o Tun ing
DTV Manu al Tu ning
ATV Manu al Tu ning
Sig nal I nform ation
CI Infor matio n
Sof tware Upda te(OA D)Off
Sof tware Upda te(US B)
Cha nnel Edit
Channel 5 2
Network SZ TV M
Modulation 16QAM
Quality 99
Signal In fo rm ation
Strength 81
2. Press the buttons to select Signal Information and then press the OK button to view the signal information.
L26DVDB21_IB_111004_Annie.indd 21 11年10月4日 下午5:56
Loading...
+ 47 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use