Logik L22FEDN12, L22FEDP12, L22FEDR12, L22FEDW12, L22FEDV12 Instruction Manual

...

Download

22” Full HD LED TV with DVD Player

Instruction Manual L22FEDN12 / L22FEDP12 / L22FEDR12 / L22FEDW12

L22FEDN_P_R_W12_IB_120402_Annie.indd 1 12年4月2日下午3:15

L22FEDN_P_R_W12_IB_120402_Annie.indd 2 12年4月2日下午3:15

Contents

Preparation ......................................................................................................................................................................................... 5

Unpacking the TV ...............................................................................................................................................................................................................5

Installing / Removing the Base Stand .........................................................................................................................................................................6

Front / Right Side View and Controls ...........................................................................................................................................................................7

Rear View and Sockets ...................................................................................................................................................................................................... 8

Installing Batteries in the Remote Control ................................................................................................................................................................9

Remote Control Operation Range ................................................................................................................................................................................9

Remote Control .................................................................................................................................................................................................................10

Connections ......................................................................................................................................................................................13

Making Video and Audio Connections .....................................................................................................................................................................13

Connecting an AV Device Using an HDMI Cable...................................................................................................................................................13

Connecting a Computer Using a VGA Cable .......................................................................................................................................................... 14

Connecting an AV Device Using a Component (YPbPr) Cable ........................................................................................................................14

Connecting an AV Device Using a SCART Cable ...................................................................................................................................................15

Connecting an AV Device Using Composite Cable ..............................................................................................................................................15

Connecting a Coaxial Audio Receiver Using an Audio Cable ...........................................................................................................................16

Connecting Headphones ...............................................................................................................................................................................................16

Initial Setup ......................................................................................................................................................................................17

Turning the TV On for the First Time .........................................................................................................................................................................17

− Target Region Descriptor ...................................................................................................................................................................................18

− Selecting the Input Source................................................................................................................................................................................19

− Channel Selection ...............................................................................................................................................................................................19

− Display Channel Information ...........................................................................................................................................................................19

− Volume Adjustment .............................................................................................................................................................................................19

Customising TV Settings .................................................................................................................................................................20

Channel Setting (TV, DTV or Radio Mode) .............................................................................................................................................................. 20

− Auto Tuning ........................................................................................................................................................................................................... 20

− DTV Manual Tuning (DTV Mode) .....................................................................................................................................................................21

− ATV Manual Tuning (ATV Mode) ......................................................................................................................................................................21

− Channel Edit (DTV Mode) .................................................................................................................................................................................. 22

− Channel Edit (ATV Mode) .................................................................................................................................................................................. 23

− Signal Information (DTV Mode) ...................................................................................................................................................................... 24

− CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 24

− Software Update (Over Air Download) (DTV Mode) ............................................................................................................................... 25

− Software Update (USB) ...................................................................................................................................................................................... 26

Picture Setting .................................................................................................................................................................................................................. 26

Sound Setting ................................................................................................................................................................................................................... 28

− Stereo Sound Reception (ATV Mode) ........................................................................................................................................................... 29

Time Settings..................................................................................................................................................................................................................... 29

Option Setting ...................................................................................................................................................................................................................31

− OSD Language .......................................................................................................................................................................................................31

− TT Language ...........................................................................................................................................................................................................31

− Audio Language (DTV Mode) .......................................................................................................................................................................... 32

− Subtitle Language (DTV Mode) ...................................................................................................................................................................... 33

− Hearing Impaired ................................................................................................................................................................................................. 33

− PVR File System (DTV Mode) ............................................................................................................................................................................ 34

− Aspect Ratio ........................................................................................................................................................................................................... 35

− Blue Screen ............................................................................................................................................................................................................ 36

− HDMI CEC (Consumer Electronics Control) (HDMI Mode) .................................................................................................................... 36

− Restore Factory Default ..................................................................................................................................................................................... 37

Lock Setting ....................................................................................................................................................................................................................... 38

− Lock System ........................................................................................................................................................................................................... 38

− Set Password ......................................................................................................................................................................................................... 39

− Block Channel ....................................................................................................................................................................................................... 39

− Parental Guidance ............................................................................................................................................................................................... 40

− Key Lock ...................................................................................................................................................................................................................41

L22FEDN_P_R_W12_IB_120402_Annie.indd 3 12年4月2日下午3:15

Using the Features ...........................................................................................................................................................................43

EPG (Electronic Programme Guide) (DTV Mode) ................................................................................................................................................. 43

− Switch On / O EPG ............................................................................................................................................................................................. 43

− Select a Programme ........................................................................................................................................................................................... 43

Teletext (ATV Mode) ........................................................................................................................................................................................................44

− To Turn on Teletext Function........................................................................................................................................................................... 44

Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 45

− Teletext within Digital Service ........................................................................................................................................................................ 45

Entertainment ..................................................................................................................................................................................46

Connecting a USB Storage Device ............................................................................................................................................................................. 46

Viewing Photos ................................................................................................................................................................................................................. 46

Listening to Music ............................................................................................................................................................................................................ 47

Viewing Movies ................................................................................................................................................................................................................ 48

My Text................................................................................................................................................................................................................................. 49

PVR (Personal Video Recorder) .......................................................................................................................................................50

Time Shift Function ......................................................................................................................................................................................................... 50

Recording DTV Programme onto a USB Storage Device ...................................................................................................................................51

Timer Programming ....................................................................................................................................................................................................... 52

Play Recorded Programme .......................................................................................................................................................................................... 53

Using the DVD Features ...................................................................................................................................................................54

Using the Built-in DVD Player ...................................................................................................................................................................................... 54

Compatible Disc Types .................................................................................................................................................................................................. 54

− Supported Formats ............................................................................................................................................................................................. 54

− Region Code .......................................................................................................................................................................................................... 54

Basic DVD Playback Functions .................................................................................................................................................................................... 55

Playing Multimedia Discs .............................................................................................................................................................................................. 57

Using the DVD General Setup Page .......................................................................................................................................................................... 58

Using the DVD Audio Setup Page .............................................................................................................................................................................. 59

Using the DVD Preference Setup Page .................................................................................................................................................................... 60

Maintenance .....................................................................................................................................................................................62

Hints and Tips ...................................................................................................................................................................................63

Display Modes ..................................................................................................................................................................................65

YPbPr Mode ....................................................................................................................................................................................................................... 65

PC Mode .............................................................................................................................................................................................................................. 65

HDMI Mode ....................................................................................................................................................................................................................... 65

Specifications ...................................................................................................................................................................................66

Safety Warnings ...............................................................................................................................................................................68

L22FEDN_P_R_W12_IB_120402_Annie.indd 4 12年4月2日下午3:15

Preparation

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Remote Control

(P.N.: S10090071G (L22FEDW12) S10090072G (L22FEDN12) S10090073G (L22FEDP12) S10090074G (L22FEDR12))

AAA Batteries x 2

(P.N.: S16150012G)

Instruction Manual

(P.N.: S17011064G)

Quick Start Guide

(P.N.: S17141109G)

Digital TV Switchcover Addendum

(P.N.: S17141110G)

Thank you for purchasing your new Logik 22” Full HD LED TV with DVD Player.

Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual so that you fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

TV with Stand Support Mains Adapter

(P.N.: S10051231G)

Screw A x 3

(P.N.: S15022036G)

Component Adapter Cable

(P.N.: S09090005G)

TV Base

(P.N.: S11191060G (L22FEDW12) S11191052G (L22FEDN12) S11191061G (L22FEDP12) S11191054G (L22FEDR12))

L22FEDN_P_R_W12_IB_120402_Annie.indd 5 12年4月2日下午3:15

Preparation

4. To remove the stand assembly, untighten the 4 screw A holding the stand assembly to the rear of the TV. Slide the stand assembly out.

5. Mounting on the wall. This TV is designed to be wall-mounted with a standard 100 mm x 100 mm mounting kit (sold separately) designed for flat-panel TVs. Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to page 13-16 and page 47 for details) before mounting on to the wall.

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or

thick piece of foam) is placed beneath the screen.

3. To install the TV stand, first attach the base stand to the TV by using screw A. Align the screw holes then secure with a screw driver (not included) using the 3 screw A provided to fix the base stand to the TV.

Installing / Removing the Base Stand

100 mm

Four mounting holes

(size M6 screw)

The screw holes will only align if the front of the base stand is at the front of the TV.

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

• Please read this instruction manual carefully while setting up your TV.

• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK

Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

Keep all the spare screws should you want

to use the stand assembly option.

Remove the stand assembly before mounting the TV onto the wall.

Screw A x 3

(P.N.: S15022036G)

Screw A x 4

(P.N.: S15022036G)

TV Front

Base Stand Front

screw

unscrew

L22FEDN_P_R_W12_IB_120402_Annie.indd 6 12年4月2日下午3:15

Preparation

Front / Right Side View and Controls

Item Description

1 POWER LED

Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will illuminate blue and then blink red and blue confirming that a timer recording programme has started in the standby mode.

2 IR (Infrared Receiver)

Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected.

3 Disc Slot

Insert the disc with the label side facing the rear of the TV. (12 cm discs only. Don't insert 8 cm discs.)

Press to eject disc. (DVD mode)

Press to start playback or pause. (DVD mode)

6 SOURCE

Press to select among different input signal sources: DTV / ATV / DVD / AV / SCART / YPBPR / HDMI / PC / USB. Confirmed the selection on OSD menu.

7 MENU Displays the OSD (on screen display) menu.

8 V + / –

Adjusts the volume. Press to select and adjust a setting in the OSD menu.

9 CH + / – Press to select a channel or select a sub-menu from the OSD menu.

10 STANDBY

Switches the TV on from standby mode. Switches the TV back to standby mode.

1 2

L22FEDN_P_R_W12_IB_120402_Annie.indd 7 12年4月2日下午3:15

Preparation

Rear View and Sockets

1 32 4 5

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

Socket Description

1 DC IN Connects the mains adapter to the mains socket.

2 VGA (PC) / VGA (PC) AUDIO IN

Connects to a computer or other devices with a VGA interface.

3 SCART Connects to a VCR, DVD Player, or other AV device with a SCART output socket.

4 CVBS / AUDIO IN (L/R)

Connects to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices.

5 Mini YPbPr / AUDIO IN (L/R)

Connects to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets.

Connects to the headphones.

7 CI CARD IN Allows the insertion of a Common Access Module. (Refer to page 24 for details.)

8 HDMI

Connects to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver.

9 AERIAL IN Connects to the aerial socket on the wall with the RF coaxial cable.

10 USB

Allows the insertion of a USB storage device to play video, audio, photo and text files (USB mode) and record DTV programmes on to a USB storage device.

11 COAX Audio Out Connects to the audio socket on the digital/standard 5.1 audio system.

L22FEDN_P_R_W12_IB_120402_Annie.indd 8 12年4月2日下午3:15

Preparation

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. The operating distance may vary depending on the brightness of the room.

Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the

remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment cover.

30° 30°

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.

• Only use the battery type indicated in this manual.

• When the batteries are exhausted, the remote will

not function. Replace both batteries at the same time with new ones.

• Do not install new batteries with used ones and do not mix different types of batteries.

• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.

Handling the Remote Control

• Take care of your fingernails when you press and hold the battery release tab.

• Do not drop or cause impact to the remote control.

• Do not spill water or any liquid on the remote

control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct

sunlight or near sources of excessive heat.

• Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.

L22FEDN_P_R_W12_IB_120402_Annie.indd 9 12年4月2日下午3:15

Preparation

Switch the TV between on and standby mode.

MUTE

Mute and restore your TV sound.

3. 0-9 Number Button

• Press to select a programme. (ATV / DTV mode)

• Select numbered items in a menu. (DVD mode)

4. -/--

Select and switch to a channel that is higher than Channel 9. (ATV mode)

RECALL

Return to the previous viewing channel. (ATV / DTV mode)

6. TV GUIDE

Display the EPG (Electronic Programme Guide). (DTV mode)

7. VOL + / –

Adjust the volume.

8. CH + / –

Select a channel.

9. FAV

Display the favourite channel list. (ATV / DTV mode)

10. DTV (TV/RADIO)

A short-cut to switch input source to TV / Digital radio channels. (DTV mode)

11. ATV

A short-cut to switch input source to ATV. (ATV mode)

12. DVD

A short-cut to switch input source to DVD. (DVD mode)

13. USB

A short-cut to switch input source to TV / Digital radio channels. (DTV mode)

14. SOURCE

Select among the dierent input signal sources: DTV / ATV / DVD / AV / SCART / YPBPR / HDMI / PC / USB.

15. INFO

• Display the present channel information such as the current time and channel name. (ATV / DTV mode)

• Display the present disc information. (DVD mode)

16.

Allow you to navigate the OSD menus and adjust the system settings to your preference.

• Conrm the selection in the OSD menus.

• Display channel list. (ATV / DTV mode)

17. MENU

• Display the OSD (On Screen Display) menu.

• Return to the previous menu in the OSD menus.

18. Exit

Exit the OSD menu.

Remote Control

L22FEDN_P_R_W12_IB_120402_Annie.indd 10 12年4月2日下午3:15

Preparation

19. SLEEP

Set the TV sleep timer: OFF / 10 / 20 / … / 180 / 240 min.

20. ASPECT

Watch the screen in various formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Full / Subtitle. (Full only operates in YPBPR / HDMI mode)

21. AUDIO

• Switches between the audio languages (only applicable when the TV programme / disc has this features). (DTV / DVD mode)

• Select Mono / Stereo Sound Reception. (ATV mode)

22. SUBTITLE

• Select subtitles which are broadcast with the programme. (DTV mode)

• Select subtitles on the DVD. (DVD mode)

23.

To skip to the beginning of the previous chapter / track / photo. (DVD / USB mode)

24.

Record the current programme. (DTV mode)

25.

To skip to the beginning of the next chapter / track / photo. (DVD / USB mode)

26.

To stop the playback or recording. (DVD / USB mode)

27.

To reverse playback rapidly. (DVD / USB mode)

28. REC LIST

Display the record list. (DTV mode)

29.

To advance playback rapidly. (DVD / USB mode)

30.

• To start the timeshift playback. (DTV mode)

• To start playback or pause. (Media / DVD mode)

31. DVD SETUP

Display and exit the DVD setup menu. (DVD mode)

32. DVD MENU

Display the DVD menu. (DVD mode)

33.

Eject a disc. (DVD mode)

34. DVD TITLE

Display the DVD title content. (DVD mode)

30 33 34

2220

2119

L22FEDN_P_R_W12_IB_120402_Annie.indd 11 12年4月2日下午3:15

Preparation

35. TEXT HOLD

Freeze a multi-page passage on screen in teletext. (ATV mode)

36. TEXT

Turn on and o the teletext function. (ATV / DTV mode)

37. TEXT/DVD ZOOM

• To enlarge the picture on the TV in teletext. (ATV mode)

• Zoom in on the displayed frame. (DVD mode)

38. DISPLAY

Displays channel and programme information.

39. Coloured buttons

Access the TELETEXT items or channel edit when using Digital / Freeview TV Channels. (ATV / DTV mode)

GOTO (RED)

To skip to a specic location on a DVD / CD. (DVD mode)

A–B (GREEN)

Repeat a segment between A and B. (DVD mode)

ANGLE (YELLOW)

Select dierent angles for the video. (DVD mode)

REPEAT (BLUE)

Select between dierent repeat modes. (DVD mode)

L22FEDN_P_R_W12_IB_120402_Annie.indd 12 12年4月2日下午3:15

Connections

Connecting an AV Device Using an HDMI Cable

• This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection) Protocol.

• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p.

1. Use an HDMI cable to connect the TV’s HDMI input socket to the external AV device’s HDMI output socket.

2. Plug the connected devices into the mains socket before switching on the TV.

3. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

4. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select HDMI

and then press the OK button to confirm.

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and connection procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.

Signal Type

Separate Audio

Connection Required

HDMI

HDMI (480i/480p/576i/576p/720p/1080i/1080p)

VGA (PC)

Yes

VGA (PC)

Audio In

YPbPr

Component Video (480i/480p/576i/576p/720p/1080i/1080p)

Yes

SCART (RGB Input) No

CVBS

Composite Video

Yes

Best Video Performance

Although this TV is able to connect to an HDMI device, it is possible that some devices may not operate correctly.

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

Rear Right Side View of TV

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

HDMI Cable (not included)

L22FEDN_P_R_W12_IB_120402_Annie.indd 13 12年4月2日下午3:16

Connections

Connecting an AV Device Using a Component (YPbPr) Cable

1. Connect the supplied component adapter cable

and a component cable from the TV’s Mini YPbPr input sockets to an external AV device’s component output sockets.

2. Use an AV cable to connect the TV’s AUDIO(L/R) input sockets to the external AV device’s component audio output sockets. (Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on DVD player

Y Pb Pr Y Cb Cr

3. Plug the connected devices into the mains socket before switching on the TV.

4. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

5. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select YPBPR

and then press the OK button to confirm.

Connecting a Computer Using a VGA Cable

1. Use a VGA cable to connect the TV’s VGA (PC) input

socket to a computer’s VGA output socket. Use an audio cable to connect the TV’s VGA (PC) Audio In input socket to the computer’s audio output socket.

2. Plug the connected devices into the mains socket before switching on the TV.

3. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

4. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select PC and

then press the OK button to confirm.

• The native resolution of this TV is 1920x1080 please check your PC graphic settings for the most suitable picture quality.

• If your computer is set to shut down after a few minutes in the idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the STANDBY button on the front right side panel of the TV or the

button on the remote control to restart the TV.

Rear Right Bottom View of TV

VGA Cable

(not included)

Audio Cable (not included)

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

Computer

Rear Right Bottom View of TV

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

Satellite Receiver

Video Camera

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

COMPONENT

OUT

AV Cable

(not included)

Yellow (Video)

Red (R)

White (L)

Yellow (Video)

Red (R)

White (L)

Component Cable (not included)

Pb/Cb

Pr/Cr

Pb/Cb

Pr/Cr

Component Adapter Cable (included)

Blue (Pb/Cb)

Red (Pr/Cr)

Green (Y)

L22FEDN_P_R_W12_IB_120402_Annie.indd 14 12年4月2日下午3:16

Connections

Connecting an AV Device Using Composite Cable

1. Use the AV cable to connect the TV’s AUDIO(L/R)/

VIDEO IN input sockets to an external AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket before switching on the TV.

3. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

4. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select AV and

then press the OK button to confirm.

Connecting an AV Device Using a SCART Cable

1. Use a SCART cable to connect the TV’s SCART input

socket to an external AV device’s SCART output socket.

2. Plug the connected devices into the mains socket before switching on the TV.

3. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

4. The TV will change the input source to SCART automatically once the AV device is switched on.

Rear Right Bottom View of TV

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

SCART Cable (not included)

Satellite Receiver

VCR

DVD Player / Recorder

Set-top Box

Satellite Receiver

Rear Right Bottom View of TV

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

Video Camera

VCR

DVD Player / Recorder

Set-top Box

Game Console

AV Cable (included)

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

Red (R)

White (L)

L22FEDN_P_R_W12_IB_120402_Annie.indd 15 12年4月2日下午3:16

Connections

Connecting a Coaxial Audio Receiver Using an Audio Cable

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TV’s COAX Audio Out output socket to an external audio receiver’s audio coaxial input socket.

2. Plug the connected devices into the mains socket before switching on the TV.

3. Press the STANDBY button on the front right side panel of the TV or the

button on the remote

control to turn on your TV.

4. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select any desired input source and then press the OK button to confirm.

The TV’s volume control will have no effect. You may control the audio level via the Audio Receiver.

Rear Right Side View of TV

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

Audio Cable (not included)

Audio Receiver

Connecting Headphones

Connect your headphones to the TV’s socket.

Before putting on the headphones, turn the volume down then put the headphones on and slowly increase the volume until you reach a comfortable listening level.

Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods.

Rear Right Side View of TV

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

Earphones Cable

(not included)

L22FEDN_P_R_W12_IB_120402_Annie.indd 16 12年4月2日下午3:16

Initial Setup

5. Press the

buttons to select your desired language to be displayed on the menu. The default on-screen menu language is set as English. Press the OK button to confirm.

Initial Setup

Turning the TV On for the First Time

1. Connect one end of the RF coaxial cable to the aerial

socket on the wall and the other end of the cable to the AERIAL IN socket at the rear right bottom view of your TV.

Do not connect the TV to the mains supply until you have completed all the connections.

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

RF coaxial cable (not included)

2. Connect the mains adapter to the mains socket after you

have completed all the connections. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.

3. In standby mode, press the STANDBY button on the front right side panel of the TV or the

button on the remote control to turn the TV on. The red LED indicator will turn blue.

• Only use the included mains adapter. Do not use it with any other equipment.

• Always disconnect the TV from the mains socket when not in use for a long period of time.

• The STANDBY button on the front right side panel of the TV or the

button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains adapter from the mains socket.

VGA (PC)

DC IN

VGA (PC)

Audio In

Mini YPbPrCVBSSCART R L

To the mains socket

4. The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press

the OK button. (If you have already installed the TV using the Quick Start Guide, please go to the section “Selecting the Input Source” on the next page.)

Please select an OSD Language

Deutsch

Español Français

Português Italiano

English

Please ensure aerial is plugged in!!

Then press OK button to start

L22FEDN_P_R_W12_IB_120402_Annie.indd 17 12年4月2日下午3:16

Initial Setup

9. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

10. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the Channel menu (refer to page 22-23 for details).

Target Region Descriptor

During tuning your TV may have received signals from more than one transmitter. If this has occurred the Target Region Descriptor screen will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.

1. Press the OK button to confirm the Country Code, this will highlight the Primary Region England.

2. Press the OK button to highlight Secondary Region and press the buttons to select your preferred option (if available).

3. Press the OK button to confirm, and Tertiary Region will be highlighted. Press the

buttons to select the your preferred option (if available).

4. Press the OK button to confirm.

Country Code This will be shown as GBR for the UK.

Primary Region

This will show the regional country (England, Wales, Scotland, NI).

Secondary Region

This will allow you to set the region for your local news service on BBC and ITV (London, Beds and Cambs etc).

Tertiary Region

You may receive signals from more than one transmitter within the Secondary Region, (e.g Beds and Cambs may have Luton or Sandy Heath).

6. The Tune Type menu will have the priority set to DTV, if you want to select ATV+DTV / ATV press the

buttons.

7. To select the country option press the

button and then press the

buttons. Press the OK button to confirm.

8. Channel tuning will commence. This operation may take up to 10 minutes. The display will show the progress of the tuning and the number of channels found.

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

Target Region Setting

Country Code GBR

Primary Region England

Secondary Region

Tertiary Region

London

Tune Type

Czech

Denamrk

France

Finland

Germany

Italy

Netherlands

DTV

Hungary

When only the DTV tune function is selected the channel tuning progress will not find any ATV channels and will show TV : 0 channel).

L22FEDN_P_R_W12_IB_120402_Annie.indd 18 12年4月2日下午3:16

Initial Setup

Selecting the Input Source

1. Press the SOURCE button on the front right side panel of the TV

or on the remote control to display the Input Source list.

2. Press the

buttons to select the input source that you want:

DTV / ATV / DVD / AV / SCART / YPBPR / HDMI / PC / USB.

3. Press the OK button to confirm your selection. If you do not press the OK button to confirm, the TV will automatically confirm the selected input source within 4 seconds.

Alternative

• Press the ATV button to switch to ATV channels directly.

• Press the DTV (TV/RADIO) button to switch to TV /

digital radio channels directly.

• Press the USB button to switch to USB mode directly.

• Press the DVD button to switch to DVD mode directly.

Channel Selection

• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.

Alternative

Press the OK button to enter the Channel List. Then use the buttons to highlight and select the channel. Press the OK button to view the selected channel.

• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 40 for details on Block Channel).

• Press the FAV button to view the Favourite List. Then use the

buttons to highlight and select the channel. Press the OK

button to view the selected channel (refer to page 22-23 for details on Channel Edit).

• Press the

button to return to the previously viewed channel.

Display Channel Information

• Press the INFO button to view the current information.

Volume Adjustment

• Press the V + or – button on the right side panel of the TV or the VOL + or – button on the remote control to adjust the volume.

• If you wish to switch the sound off, press the

MUTE button. Press the MUTE button again or the VOL + or – button to

resume audio listening.

Input Source

DTV

ATV

DVD

YPBPR

SCART

HDMI

USB

L22FEDN_P_R_W12_IB_120402_Annie.indd 19 12年4月2日下午3:16

Customising TV Settings

4. Channel tuning will commence. This operation may take up to 10 minutes. The display will show the progress of the tuning and the number of channels found.

5. If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning. An installation reminder will appear the next time you turn on the TV.

6. After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 22-23 for details).

3. In the Tune Type menu, press the

buttons to select ATV / DTV /

ATV+DTV. Press the

button and then press the buttons to select the country where you will operate the TV. Press the OK button to confirm.

2. Press the

buttons to select Auto Tuning and then press the OK

button.

Channel Setting (TV, DTV or Radio Mode)

Auto Tuning

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Tune Type

Czech

Denamrk

France

Finland

Germany

Italy

Netherlands

ATV+DTV

Hungary

Customising TV Settings

Auto Tuning

ATV Manual Tuning

Software Update(OAD) Off

Software Update(USB)

Channel Edit

(ATV mode)

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

(DTV mode)

L22FEDN_P_R_W12_IB_120402_Annie.indd 20 12年4月2日下午3:16

Customising TV Settings

3. The DTV Manual Tuning screen will pop up. Press the

buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

2. Press the

buttons to select DTV Manual Tuning and then press the

OK button.

DTV Manual Tuning (DTV Mode)

Allows you to make manual fine tuning adjustments to the channel under DTV mode.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

DTV : 0 Programme

UHF CH 21

DTV Manual Tuning

Press OK to search

Bad

Freq: 474.00 MHz Good

2. Press the buttons to select ATV Manual Tuning and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

ATV Manual Tuning

Software Update(OAD) Off

Software Update(USB)

Channel Edit

ATV Manual Tuning (ATV Mode)

Allows you to make manual fine tuning adjustments if the channel reception is poor under ATV mode.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

L22FEDN_P_R_W12_IB_120402_Annie.indd 21 12年4月2日下午3:16

Customising TV Settings

3. The ATV Manual Tuning screen will pop up. Use the buttons to select the following options and the

buttons to adjust the setting.

Current CH Displays the current channel number.

Colour System

Selects the colour system: Auto / SECAM / PAL.

Sound System Selects the sound system: DK / I / BG.

Fine-Tune

Press the

buttons to make manual fine

tuning adjustments.

AFC (Auto Frequency Control)

Select AFC On to lock the desired frequency.

Press the

buttons to start the manual

tuning.

4. After finishing the manual tuning adjustment of a channel, press the MENU button to save your channel before tuning the next channel.

5. Press the EXIT button to exit the menu.

Channel Edit (DTV Mode)

Allows you to edit TV channel information in the Channel List under DTV mode.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

ATV Manual Tuning

DTV : 0 Programme

Colour System PAL

Sound System I

Current CH 1

Fine - Tune 470.25 MHz

AFC Off

3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit.

a. Delete Press the RED button to delete the selected channel.

b. Skip Press the BLUE button to select the channels that you want to skip

when you are selecting channels. Press the BLUE button again to undo it.

c. FAV (Favourite) Press the FAV button to set the selected channel as one of the

favourite programmes. Press the FAV button again to undo it.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

2. Press the

buttons to select Channel Edit and then press the OK

button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

5 Five

16 QVC

17 UK TV Gold

DTV

Delete

Skip

Fav

FAV

DTV

L22FEDN_P_R_W12_IB_120402_Annie.indd 22 12年4月2日下午3:16

Customising TV Settings

3. A Channel Edit screen will pop up. Press the

buttons to select

the programme you want to edit.

a. Delete Press the RED button to delete the selected channel.

b. Rename Press the GREEN button to rename the selected channel. Press

the

buttons to select the characters to represent the station

name. Press the

buttons to move to the next character and

then press the OK button again to confirm the new name.

c. Move Press the YELLOW button and then press the

buttons to

move to the selected channel. Press the YELLOW button or the

OK button to conrm.

d. Skip Press the BLUE button to select the channels that you want to skip

when you are selecting channels. Press the BLUE button again to undo it.

e. FAV (Favourite) Press the FAV button to set the selected channel as one of the

favourite programmes. Press the FAV button again to undo it.

4. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

2. Press the

buttons to select Channel Edit and then press the OK

button.

Channel Edit (ATV Mode)

Allows you to edit TV channel information in the Channel List under ATV mode.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

ATV Manual Tuning

Software Update(OAD) Off

Software Update(USB)

Channel Edit

1 S-07

2 S-08

3 S-09

4 S-10

5 S-04

ATV

Delete

Rename

Skip

Fav

FAV

Move

L22FEDN_P_R_W12_IB_120402_Annie.indd 23 12年4月2日下午3:16

Customising TV Settings

3. Press the MENU button to return to the previous menu, press again to return to the main menu.

4. Press the EXIT button to exit the menu.

Signal Information (DTV Mode)

Allows you to view the signal information.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

Signal Information

Channel 50

Frequency 706.00Mhz

Quality 99

Strength 91

Network Crystal Palace

2. Press the buttons to select Signal Information and then press the OK button to view the signal information.

This feature is not available in all countries.

To insert the Common Access Module

1. Before you insert the Common Access Module, ensure that the TV is

switched off and the viewing card is inserted in accordance with the Service Provider’s instructions.

2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance.

3. Switch the TV on.

To remove the Common Access Module

1. Before you remove the Common Access Module, ensure that the TV is

switched off.

2. Pull the Common Access Module from the slot.

3. Switch the TV on.

CI (Common Interface) (DTV Mode)

The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.

CI CARD IN

Common Access Module

Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a

malfunction.

Rear Right Side View of TV

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

CI (Common Interface)

Allows the Common Access Module to be inserted and access the content that has been encrypted.

L22FEDN_P_R_W12_IB_120402_Annie.indd 24 12年4月2日下午3:16

Customising TV Settings

3. A CI Information Main menu will pop up. Press the

buttons to display the module information, smart card information, language, software download. Press the OK button to confirm.

4. Press the EXIT button to return to the previous menu. Press the EXIT button again to exit the menu.

2. Press the

buttons to select CI Information and then press the OK

button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

Conax Conditional Access Main menu

Press ‘OK’ to select; Press ‘EXIT’ to quit

CI Information

Smart Card Information

Language

Software Download

Module Information

This screen is for illustration only.

To view the module information

1. Press the MENU button and then press the buttons to select the CHANNEL menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Software Update (Over Air Download) (DTV Mode)

The TV auto detects the latest firmware through the DTV signal and allows you to accept or refuse the firmware upgrade service.

1. Press the MENU button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

2. Press the

buttons to select Software Update(OAD) and then press

the OK button to select On.

3. Press the MENU button to return to return to the main menu.

4. Press the EXIT button to exit the menu.

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(OAD) Off

Software Update(USB)

Channel Edit

L22FEDN_P_R_W12_IB_120402_Annie.indd 25 12年4月2日下午3:16

Customising TV Settings

7. When the download is complete, the TV will automatically upgrade the software.

8. When the update is complete, the TV will return to standby mode.

9. Press the STANDBY button on the front right side panel of the TV or the

button on the remote control to switch on the TV.

5. During normal DTV viewing, if the TV detects the latest firmware from the DTV signal, the Over Air Download screen will appear. Press the

buttons

to select Yes / No for upgrade procedure.

Yes

New Fireware is available

TV Version V0.01

Stream Version v0.02

Yes to upgrade

No to exit the upgrade

EXIT

Download

20%

Software Update(OAD)

66%

6. If you select Ye s, the over air download will start. Press the EXIT button if you want to stop the download and exit the menu.

During the download, please do not turn off or unplug your TV.

If you experience difficulties after the software update, we recommend that you restore your TV to the factory

default settings. To do this, follow the steps below:

1. Press the MENU button to go to the MAIN menu. Press the

buttons to select OPTION and then press the OK

button.

2. Press the

buttons to select Restore Factory Default and then press the OK button. Press the button to

select Ye s to reset the setting.

3. The TV will restore all settings and go to the First Time Installation. Follow the First Time Installation steps (refer to page 17-19 for details).

Software Update (USB)

This function is only for servicing purposes. Any update information for this TV (if any) will be available at the following website: http://knowhow.com/ or call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

2. Press the

buttons to select the following picture options and then

press the OK button.

Picture Setting

Allows you to set your preferred picture mode.

1. Press the MENU button and then press the

buttons to select the

PICTURE menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

Colour Temp

Noise Reduction

Standard

Normal

Off

SCREEN

L22FEDN_P_R_W12_IB_120402_Annie.indd 26 12年4月2日下午3:16

Customising TV Settings

3. Press the

buttons to select the options. Press the OK button and then press the buttons to adjust each option’s

setting.

Picture Mode Cycles among picture mode: Standard / Mild / Personal / Dynamic.

Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode)

Brightness Increases or decreases the amount of white in the picture. (for Personal mode)

Colour Controls the colour intensity. (for Personal mode)

Tint (For NTSC

format)

Adjusts the balance between red and green levels. (Tint is only available for NTSC signal input via the SCART or AV IN.)

Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture. (for

Personal mode)

Colour Temperature

Cycles among colour temperature: Cold / Normal / Warm. Adjusts the colour components independently to achieve a warm or cool. (for Personal mode)

• Cold: Increases blue tint

• Normal

• Warm: Increases red tint

Noise Reduction Reduces the noise level of the connected device: Off / Low / Middle

/ High.

Screen

(PC mode)

Adjusts the PC desktop content.

Auto Adjust

Allows you to synchronise a PC signal automatically.

Auto Adjust

H-Offset

V-Offset

Size

Phase

Position Reset

H-Offset Adjusts the position of the picture

left and right in the window.

V-Offset Adjusts the position of the picture up

and down in the window.

Size Adjusts the picture horizontally, in

linear properties

Phase Controls the signal phase, which

can improve focus clarity and image stability based on the PC mode.

Position Reset

Press to set the best screen position.

4. Press the MENU button to return to the previous menu, press again to return to the main menu.

5. Press the EXIT button to exit the menu.

Picture Mode

Dynamic

Standard

Mild

Personal

BACK MENU

EXIT

Colour Temp

Cold

Normal

Warm

BACK MENU

EXIT

Noise Reduction

Off

Low

Middle

High

BACK MENU

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 27 12年4月2日下午3:16

Customising TV Settings

2. Press the

buttons to select the following sound options and then

press the OK button.

Sound Setting

Allows you to select an audio-enhancement technique.

1. Press the MENU button and then press the

buttons to select the

SOUND menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Sound Mode

Treble

Auto Volume

SRS TruSurround HD

SPDIF Mode

AD Switch

Bass

Balance

Standard

Auto

Off

3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.

Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music /

Movie / Sports / Personal.

Treble Controls the relative intensity of higher pitched sounds. (for Personal mode)

Bass Controls the relative intensity of lower-pitched sounds. (for Personal mode)

Balance Adjusts the relative volume of the speakers in a multiple speaker system.

Auto Volume Volume levels are automatically controlled (e.g., advertisements tend to be louder than the programmes).

SRS SRS TruSurround HD™ (TS HD) is a robust multichannel virtualisation technology developed by SRS

Labs that provides an enhanced listening experience unlike any other technology that has been offered for a two speaker playback environment. TruSurround HD builds upon its predecessor, the industry leading surround sound virtualiser, SRS TruSurround XT®. Not only does TruSurround HD process up to

6.1 channels for playback over two speakers or headphones, but it also utilises additional proprietary algorithms from SRS Labs to optimise bass performance, for deep rich bass, dialogue clarity for better intelligibility of vocals, and definition control for maximum high-frequency clarity. Press the OK button to select On / Off.

SPDIF Mode Selects the digital audio output mode.

AD Switch

(For DTV mode)

Audio Description is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the main audio from the broadcaster.

• Set to “Off” for normal broadcasting sound coming out from speakers.

• Set to “On” to activate the description sound track if available. The availability of Audio Description

sound track is indicated by the visually impaired icon "V.I." in the information banner.

4. Press the MENU button to return to the previous menu, press again to return to the main menu.

5. Press the EXIT button to exit the menu.

Sound Mode

Standard

Music

Movie

Sports

Personal

BACK MENU

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 28 12年4月2日下午3:16

Customising TV Settings

Stereo Sound Reception (ATV Mode)

When a programme is selected, press the AUDIO button to display the sound information for the selected station.

Broadcast On Screen Display

Mono

Stereo

MONO

NICAM STEREO

Mono sound selection

If the stereo signal is weak, you can switch to mono by pressing the AUDIO button. In mono reception, the clarity of sound is improved. To switch back to stereo, press the AUDIO button again.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Time Settings

Allows you to adjust time zone, sleep time, auto standby, OSD timer and summer time.

1. Press the MENU button and then press the

buttons to select the

TIME menu and then press the OK button.

2. Press the

buttons to select the following time options and then

press the OK button.

Clock

Time Zone

Sleep Timer

Auto Standby

OSD Timer

Summer Time

-- -- -- --

GMT

Off

4 H

10 S

Auto

3. Press the buttons to select the options. Press the OK button and then press the buttons to adjust each option’s setting.

Clock (DTV mode) The clock is set automatically when receiving a digital signal.

Time Zone

(DTV mode)

When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

Time Zone

Lisbon GMT Amsterdam GMT+1

Rabat GMT

Beograd GMT+1

Brussels GMT+1

Berlin GMT+1

Budapest GMT+1

Canary GMT

London GMT

Move

L22FEDN_P_R_W12_IB_120402_Annie.indd 29 12年4月2日下午3:16

Customising TV Settings

Sleep Timer The sleep timer automatically switches the TV to standby

after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function.

Press the

buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / … / 180 / 240 min and then press the OK button to confirm. The timer begins to count down from the number of minutes selected.

Alternative

1. You may press the SLEEP button repeatedly to

select the number of minutes: OFF / 10 / 20 / … / 180 / 240 min directly.

2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears.

Sleep Timer

Off

10min

20min

30min

60min

90min

BACK MENU

EXIT

Auto Standby The unit will automatically switch to standby mode 4 hours

after the last time the remote control was used. A reminder screen will pop up and count down before the unit switches to standby mode. If you want to operate the TV for a long period of time, turn off the auto standby function. Press the MENU button to display the main menu. Press the

buttons to select the Time option and then press the OK button. Press the buttons to select the Auto Standby option and then press the OK button to select "Off". Press the EXIT button exit the main menu. To save energy you should always turn the auto standby function back to "3H" or "4H".

the unit will automatically switch to standby mode in 4 Min 26 Sec. Press the OK button to continue viewing.

Auto Standby

Off

3 H

4 H

5 H

BACK MENU

EXIT

OSD Timer Displays time of the on-screen menu: 5s / 10s / 15s / 20s /

25s / 30s and then press the OK button to confirm.

OSD Timer

5 S

10 S

15 S

20 S

25 S

30 S

BACK MENU

EXIT

Summer Timer Press the buttons to select OFF / ON / Auto.

4. Press the MENU button to return to the previous menu, press again to

return to the main menu.

5. Press the EXIT button to exit the menu.

If you turn the TV off after setting the sleep timer, the sleep timer setting

will be erased.

L22FEDN_P_R_W12_IB_120402_Annie.indd 30 12年4月2日下午3:16

Customising TV Settings

Option Setting

OSD Language

Allows you to select your desired on screen menu language.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

3. Press the buttons to navigate the menu and change the settings. Press the OK button to confirm to return to the previous menu.

4. Press the EXIT button to exit the menu.

OSD Language

Deutsch

Español Français

Português Italiano

English

2. Press the buttons to select OSD Language and then press the OK button. The default on-screen menu language is English.

Hearing Impaired

Aspect Ratio

Blue Screen

Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

HDMI CEC

English

West

English

TT Language

Allows you to select your preferred Teletext language.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Hearing Impaired

Aspect Ratio

Blue Screen

Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

HDMI CEC

English

West

English

Hearing Impaired

Aspect Ratio

Blue Screen

Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

HDMI CEC

English

West

English

2. Press the buttons to select TT Language and then press the OK button.

L22FEDN_P_R_W12_IB_120402_Annie.indd 31 12年4月2日下午3:16

Customising TV Settings

Audio Language (DTV Mode)

Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.)

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Audio Language and then press the OK button.

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

3. Press the buttons to select the Primary / Secondary Audio Language. Press the

button and then press the buttons to select your desired audio language. Press the OK button to confirm and return to the previous menu.

4. Press the EXIT button to exit the menu.

Audio language

Dansk

English

Hrvatski

Česky

Ελληνικά

Français

ItalianoDeutsch

Español

Primary

3. Press the buttons to select your desired TT Language. Press the OK button to confirm and return to the previous menu.

4. Press the EXIT button to exit the menu.

TT Language

West

East

Russian

Arabic

Farsi

BACK M ENU

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 32 12年4月2日下午3:16

Customising TV Settings

3. Press the

buttons to select the Primary / Secondary Subtitle

Language. Press the

button and then press the buttons to select your desired subtitle language. Press the OK button to confirm and return to the previous menu.

4. Press the EXIT button to exit the menu.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Subtitle Language (DTV Mode)

Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.)

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

2. Press the

buttons to select Subtitle Language and then press the

OK button.

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

Hearing Impaired

Shows information for the hearing-impaired in some programmes. (For DTV channels only if available.)

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Subtitle language

Dansk

English

Hrvatski

Česky

Ελληνικά

Français

ItalianoDeutsch

Español

Primary

While watching a DTV programme, you can press the

SUBTITLE button on the remote control to display the Subtitle Language List and then press the

buttons to select the

Subtitle Language OFF. Press the OK button to confirm. (Only

applicable when the TV programme has this feature.)

2. Press the buttons to select Hearing Impaired and then press the OK button to select On / Off.

3. Press the MENU button to return to the main menu.

4. Press the EXIT button to exit the menu.

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

L22FEDN_P_R_W12_IB_120402_Annie.indd 33 12年4月2日下午3:16

Customising TV Settings

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

2. Press the buttons to select PVR File System and then press the OK button.

3. Press the

buttons to select the following PVR File System options

and then press the OK button.

Select Disk Select the disk where you want to store your recorded content.

Check PVR File System

Press the OK button, the system will now check your USB device's suitability for PVR. The system will show "Checking". Upon the completion the system will show either "SUCCESS" or "FAIL".

USB Disk If no USB storage device is connected, it will show "No USB Disk". If the Check PVR File System has a

"SUCCESS" it will show "Pass".

Format Press the OK button, a File System Size menu will pop-up. Press the

buttons to select your

preferred file type between FAT32 and HiSpeed FS. If you select HiSpeed FS, press the

button and

then press the

buttons to select your preferred file size. Press the OK button to confirm and then

press the

button to start formatting.

Warn ing! All d ata will be l ost.

Sta rt Exit

For mat dis k

File System Size

PVR File System Type

PVR File System Size

SD 107 Mins

FAT32

All

Do not u nplug U SB devi ce.

Form atting, pleas e wait

Form at disk

Time Shift Size After formatting the Time Shift Size menu will appear if you have

selected HiSpeed FS in PVR File System Type. Press the

buttons to select your preferred file size. Press the OK button to confirm. This option cannot be chosen if you have selected FAT32 in PVR File

System Type.

Speed This shows you the transfer rate of your USB storage device.

Free Record Limit Press the

buttons to set the recording time limit from 1-4 hours.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

Start

4 Hr.

Check PVR File System

USB Disk

Select Disk

Format

Time Shift Size

Speed

Free Record Limit

SUCCESS

Pass

0 MB

1792 KB/s

4 Hr.

Time Shift Size

Time Shift Disk Size

SD 112 Mins

4GB

PVR File System (DTV Mode)

Allows you to select your preferences in the PVR File System.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 34 12年4月2日下午3:16

Customising TV Settings

Aspect Ratio

Allows you to watch the screen in various picture formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom / Full / Subtitle.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

2. Press the

buttons to select Aspect Ratio and then press the OK

button.

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

3. Press the buttons to change the following settings and then press the OK button to confirm and return to previous menu.

Input Signal 4:3 Input Signal 16:9

Auto This selection will display

the picture according to the aspect ratio of the input source.

This selection will display the picture according to the aspect ratio of the input source.

4:3 This selection will allow you to

view a picture with an original 4:3 aspect ratio. Black bars will appear on both the left and right of the screen.

This selection will allow you to adjust the picture horizontally, in linear proportion. Black bars will appear on both the left and right of the screen.

16:9 This selection will allow you to

adjust the picture horizontally, in linear proportion, to fill the entire screen.

This selection will allow you to view a picture with an original 16:9 aspect ratio.

Zoom This selection will allow you to

zoom in the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

This selection will allow you to zoom in the picture without any alteration, while the 4 sides of the picture will be cropped.

Smart Zoom This selection is similar to 16:9

mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.

This selection is similar to 16:9 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom.

Full

(HDMI & YPBPR mode only)

This selection will detect the resolution of the HDMI signal and display an image with the same number of pixels.

L22FEDN_P_R_W12_IB_120402_Annie.indd 35 12年4月2日下午3:16

Customising TV Settings

HDMI CEC (Consumer Electronics Control) (HDMI Mode)

Allows you to command and control two or more HDMI CEC compliant devices, that are connected through HDMI, by using only one of the TV remote controls (e.g. controlling a TV set, set-top box and DVD player using only the remote control of the TV). HDMI CEC also allows individual HDMI CEC compliant devices to command and control each other without user intervention.

Make sure that your HDMI CEC compliant device is connected to your TV using a HDMI cable and the correct HDMI input source is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.)

HDMI-CEC Connection

2. Press the buttons to select Blue Screen and then press the OK button to select On / Off.

3. Press the MENU button to return to the previous menu, press again to

return to the main menu.

4. Press the EXIT button to exit the menu.

Subtitle This selection will allow you to

zoom in the picture without any alternation, while filling the entire screen with subtitles shown at the bottom of the screen.

This selection will allow you to zoom in the picture without any alternation, while showing subtitles at the bottom of the screen.

4. Press the MENU button to return to the previous menu, press again to return to the main menu.

5. Press the EXIT button to exit the menu.

Blue Screen

Allows the blue background to turn On or Off during weak or no signal conditions.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

Hearing Impaired

Aspect Ratio

Blue Screen

HDMI CEC Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

HDMI CEC compliant device

HDMI Cable

(not included)

• This unit can only communicate with HDMI-CEC compatible devices.

• To be sure that the HDMI-CEC device has this feature, check to see if there is HDMI-CEC compatible logo on it.

L22FEDN_P_R_W12_IB_120402_Annie.indd 36 12年4月2日下午3:16

Customising TV Settings

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select HDMI CEC and then press the OK button.

Hearing Impaired

Aspect Ratio

Blue Screen

HDMI CEC

Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

1. Press the MENU button and then press the buttons to select the OPTION menu and then press the OK button.

3. The HDMI CEC sub-menu will display.

HDMI CEC

This will allow your TV to communicate with the connected HDMI CEC compliant device. Press the

buttons to selec HDMI CEC

and then press the

buttons to turn On.

Device Menu

Press the

buttons to select Device Menu. Press the OK button to display the setup menu of the connected HDMI CEC compliant device. You can use the

buttons to navigate through the setup menu (some HDMI-CEC compliant devices may not support this function).

Auto Turn Off

Press the

buttons to select Auto Turn

Off and then press the

buttons to turn on. This will allow the connected HDMI compliant device to automatically turn off when you turn the TV to standby mode.

5. Press the MENU button to return to the previous menu, press again to return to the main menu.

6. Press the EXIT button to exit the menu.

Restore Factory Default

Restores all settings to the factory defaults.

1. Press the MENU button and then press the

buttons to select the

OPTION menu and then press the OK button.

Auto Turn Off

HDMI CEC

Device Menu

Off

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 37 12年4月2日下午3:16

Customising TV Settings

2. Press the

buttons to select Restore Factory Default and then press

the OK button.

3. Press the

button to select “Yes ”. The TV will return to the first time installation menu. Press the

button to select "No" to cancel and return to the main menu.

Are you sure?

Yes No

All channel and user settings will be lost and the TV will revert to "First Time Installation".

Hearing Impaired

Aspect Ratio

Blue Screen HDMI CEC

Restore Factory Default

OSD Language

Audio Language

TT Language

PVR File System

Subtitle Language

Off

Auto

English

West

English

Lock Setting

To access the LOCK menu, you must enter the password. Enter the default password “0000” for first time use. To change the password, refer to “Change Password” (see below).

Lock System

The Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes.

The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default.

1. Press the MENU button and then press the

buttons to select the

LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Lock System and then press the OK button.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Please enter password

The default password is “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

L22FEDN_P_R_W12_IB_120402_Annie.indd 38 12年4月2日下午3:16

Customising TV Settings

4. Press the buttons to select Lock System and then the OK buttons to select On / Off. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Restore Factory Default.

5. Press the MENU button to return to the previous menu, press again to return to the main menu.

6. Press the EXIT button to exit the menu.

Set Password

1. Press the MENU button and then press the buttons to select the LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

2. Press the buttons to select Set Password and then press the OK button.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

3. Use the 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for confirmation.

4. Press the button to return to the previous menu. Press the MENU button to return to the main menu.

5. Press the EXIT button to exit the menu.

Block Channel

Block Channel is designed to prevent children watching unsuitable programmes.

When a channel is blocked, a valid password must be entered.

1. Press the MENU button and then press the

buttons to select the

LOCK menu and then press the OK button.

The default password is “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

Confirm new password

Please enter new password

Please enter old password

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 39 12年4月2日下午3:16

Customising TV Settings

2. Press the

buttons to select Lock System and then press the OK

button.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

4. Press the buttons to select Block Channel and then press the OK button.

5. A Block Channel screen will pop up. Press the

buttons to select a channel. Press the GREEN button on the remote control to block or unblock the channel. Press the GREEN button again to unblock.

6. Press the MENU button to return to the previous menu, press again to return to the main menu.

7. Press the EXIT button to exit the menu.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Please enter password

The default password is “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

Block Channel

1 S-07

2 S-08

ATV

Lock/Unlock

Parental Guidance

This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This allows you to set up blocking schemes to block specific channels and ratings.

This TV is programmed to remember which option it was last set to even if you switch the TV off.

When a programme is locked or rated with delayed state, a valid password must be entered.

1. Press the MENU button and then press the

buttons to select the

LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 40 12年4月2日下午3:16

Customising TV Settings

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

Please enter password

The default password is “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

2. Press the buttons to select Lock System and then press the OK button.

4. Press the

buttons to select Parental Guidance and then press the

OK button.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

5. Press the buttons to select an age rating: Off, 4-18. Then press the OK button to confirm.

6. Press the MENU button to return to the previous menu, press again to return to the main menu.

7. Press the EXIT button to exit the menu.

Parental Guidance

Off

BACK MENU

EXIT

Key Lock

Key Locked is designed to prevent children from pressing the buttons on the TV. The Lock System must be set to On for this function to operate. If the Key Locked is set to On, all buttons on the TV will be locked. All TV operations can be controlled by the remote control only.

1. Press the MENU button and then press the

buttons to select the

LOCK menu and then press the OK button.

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

L22FEDN_P_R_W12_IB_120402_Annie.indd 41 12年4月2日下午3:16

Customising TV Settings

4. Press the

buttons to select Key Lock and then press the OK button

to select On / Off.

5. Press the MENU button to return to the previous menu, press again to return to the main menu.

6. Press the EXIT button to exit the menu.

3. Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu.

2. Press the

buttons to select Lock System and then press the OK

button.

Please enter password

The default password is “0000”.

If you change the password, be sure to remember the new password! If you forget the new password, enter the master password“8899”.

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

Lock System

Set Password

Block Channel

Parental Guidance

Off

Key Lock Off

Off

L22FEDN_P_R_W12_IB_120402_Annie.indd 42 12年4月2日下午3:16

Using the Features

EPG (Electronic Programme Guide) (DTV Mode)

This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options.

The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster).

This function can be used only when the EPG information is broadcast by broadcasting companies.

The EPG displays the programme details for the next 7 days.

Switch On / Off EPG

1. Press the TV GUIDE button to switch on EPG.

2. Press the TV GUIDE button or the EXIT button again to switch off EPG and return to normal TV viewing.

Select a Programme

Press the buttons to select the desired channel and then press the buttons to select the desired programme. Press the

OK button to confirm.

Button Functions in a 7 Days Guide

Remote Control Button Function

RED (Record)

• Timer Programming See page 52 for details on Timer Programming.

• Press the RED button in the Schedule List to delete the selected preset reminder.

GREEN (Schedule)

Press the GREEN button to view the preset reminders or scheduled recordings in the Schedule list. Press the GREEN button again to return to the EPG.

YELLOW (Date)

Press the YELLOW button and then press the

buttons to view the schedule of the previous /

next day. Press the YELLOW button again to return to the EPG.

BLUE (Remind)

Press the BLUE button while on the selected programme, the Reminder setting menu will be displayed. Press the

buttons to adjust the settings and then press the OK button to confirm the settings. After confirmation, the Schedule list will then be displayed with your preset reminders shown. Press the GREEN button to return to the EPG. The TV will automatically tune to the selected programme when it starts.

INFO Press to display detailed information of the selected programme (if available).

Press to select a channel.

Press to select a programme.

OK Press to confirm and view the selected channel. TV GUIDE / EXIT Press to switch off the EPG.

Schedule List 15:30 10th Mar Delete

Time Date

Programme Title

Channel Name

Back

802 S ZTVM0 3

08 Mi nute

05 Ho ur

Apr M on th

28 Da te

Onc e Mode

Reminder setting

BAC K

Using the Features

10:00 11:00

Pinky and perky Frankenstei.. No information

2 BBC TWO My Fair Lady

7 BBC THREE This is BBC THREE

70 CBBC Channel Bear Behaving Badly Shaun the .. No information

80 BBC NEWS BBC News Our World: Stormchaser

105 BBC Red Button BBC Red Button

PROGRAMME GUDIE 1 BBC ONE

25 Dec 2008 10:06 10:00-10:15 Pinky and Perky

25 Dec

1 BBC ONE

DTV

current date and time

current programme title

current channel name

programme date programme time

programme information

channel no. and

channel name

L22FEDN_P_R_W12_IB_120402_Annie.indd 43 12年4月2日下午3:16

Using the Features

Teletext (ATV Mode)

Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.

To Turn on Teletext Function

Make sure the TV channel you are watching transmits teletext.

“No Teletext” sign will show on the screen if teletext is not available.

In ATV mode, press the TEXT button to enter Teletext mode.

Press the TEXT button once to exit and the TV will return to the channel you were watching.

To select a page of text

Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the

button.

To move to the previous page, press the

button.

To return to the index page, enter the "100" by using the 0-9 buttons.

Mix

To view a page of text while watching a TV programme, press the TEXT button twice. The text will be superimposed over the TV programme.

Double height text

If you have difficulty reading the text on the TV you can double the height of the text. Press the TEXT ZOOM button. The top half of the page will be displayed in double height text. Press the TEXT ZOOM button again. The bottom half of the page will be displayed in double height text. Press the TEXT ZOOM button again to return to the full page.

Page STOP

If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. To stop the movie to the next sub page, press the TEXT HOLD button. To continue moving through the sub pages, press the TEXT HOLD button again.

Fasttext

At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading.

L22FEDN_P_R_W12_IB_120402_Annie.indd 44 12年4月2日下午3:16

Using the Features

Digital Teletext (DTV Mode)

Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You will need to turn off Subtitle Function before using teletext (refer to page 33 for details).

Teletext within Digital Service

1. In DTV mode press the TEXT button to display teletext page.

2. Press the TEXT button to display the teletext page.

3. Press the 0-9 buttons to select a page number.

4. Follow the instructions on digital teletext and move onto the next step by

pressing OK,

, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc.

5. To change digital teletext service, select a different service by pressing the 0-9 buttons or the

buttons.

Alternative

You may press the RED button to display the teletext information when you see a red "press " logo in the top right corner of the screen (e.g. BBC services). This will now display the teletext menu and available information categories.

To access the pages, use navigation buttons to highlight item required and press the OK button to select.

Follow on screen prompts for other functions.

6. Press the TEXT button to exit.

L22FEDN_P_R_W12_IB_120402_Annie.indd 45 12年4月2日下午3:16

Entertainment

3. Press the

buttons to select your storage device and then press the

OK button.

Viewing Photos

1. Press the SOURCE button on the front right side panel of the TV or on

the remote control then press the

buttons to select the USB mode

and then press the OK button.

2. Press the

buttons to select PHOTO and then press the OK button.

PHOTO

Entertainment

Connecting a USB Storage Device

1. Switch off the TV before connecting any USB

storage device.

2. Connect your USB storage device to the USB port of your TV.

3. Plug the connected devices into the mains socket before switching on the TV.

4. Press the STANDBY button on the front right side panel of the TV or the

button on the remote control

to turn on your TV and your USB storage device.

5. Press the SOURCE button on the front right side panel of the TV or on the remote control to display the Source List. Use the

buttons to select USB

and then press the OK button to confirm.

• Some versions of portable hard disk may require more power than the TV USB socket can provide. To ensure correct operation please use the power adapter for that device.

• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA.

• The maximum supported storage space of the hard disk is 250 GB.

• The file system only supports FAT32 format.

• If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not

be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device.

• The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk.

• Disconnect the USB storage device if it is not in use.

Rear Right Side View of TV

COAX

Audio Out

AERIAL IN

USB

HDMI CI CARD IN

USB Cable (not included)

Adapter

Portable hard Disk

USB Hub

USB

L22FEDN_P_R_W12_IB_120402_Annie.indd 46 12年4月2日下午3:16

Entertainment

5. Press the

button to view.

6. Press the OK button or the INFO button to display the function bar. Press the

buttons and then press the OK button to select the function: Pause / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Music / Playlist / Info / Rotate clockwise / Rotate anti-clockwise / Zoom In / Zoom Out / Move View.

Listening to Music

1. Press the SOURCE button on the front right side panel of the TV or on

the remote control then press the

buttons to select the USB mode

and then press the OK button.

2. Press the

buttons to select MUSIC and then press the OK button.

5. Press the

button to start to play.

4. Press the

buttons to navigate in the music folder and then press

the OK button.

If you want to select the specified music, press the

buttons to select the music file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm.

4. Press the

buttons to navigate in the picture folder and then

press the OK button.

If you want to select the specified photos, press the

buttons to select the picture file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm.

3. Press the

buttons to select your storage device and then press the

OK button.

• Some audio file formats will not be supported.

• Supported file formats: mp3.

If this folder also contains music files, you can select a music track to play at the same time you view your photos.

7. Press the EXIT button to return to the previous menu.

File format supported: JPG.

L22FEDN_P_R_W12_IB_120402_Annie.indd 47 12年4月2日下午3:16

Entertainment

4. Press the

buttons to navigate in the movie folder and then press

the OK button.

If you want to select the specified movie, press the

buttons to select the movie file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm.

5. Press the

button to view.

6. Press the OK button or the INFO button to display the function bar. Press the

buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

7. Press the EXIT button to return to the previous menu.

3. Press the

buttons to select your storage device and then press the

OK button.

Viewing Movies

1. Press the SOURCE button on the front right side panel of the TV or on

the remote control then press the

buttons to select the USB mode

and then press the OK button.

2. Press the

buttons to select MOVIE and then press the OK button.

• Some audio file formats will not be supported.

• Supported file formats: MPEG1/2.

6. Select the music you want to play, it will show the music information (Album / Title / Bit Rate / Artist / Sampling / Year / Size). Then press the

button to play.

7. Press the

buttons and then press the OK button to select the function: Pause / FB / FF / Prev / Next / Stop / Repeat All / Playlist / Goto Time.

8. Press the EXIT button to return to the previous menu.

L22FEDN_P_R_W12_IB_120402_Annie.indd 48 12年4月2日下午3:16

Entertainment

4. Press the

buttons to navigate in the text folder and then press

the OK button.

If you want to select the specified text file, press the

buttons to select the text file and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm.

5. Press the

button to view.

6. Press the OK button or the INFO button to display the function bar. Press the

buttons and then press the OK button to select the function:

Prev. page / Next page / Prev. / Next / Stop / Music / Playlist / Info.

3. Press the

buttons to select your storage device and then press the

OK button.

My Text

1. Press the SOURCE button on the front right side panel of the TV or on

the remote control then press the

buttons to select the USB mode

and then press the OK button.

2. Press the

buttons to select TEXT and then press the OK button.

If this folder also contains music files, you can select a music

track to play at the same time you view your photos.

7. Press the EXIT button to return to the previous menu.

L22FEDN_P_R_W12_IB_120402_Annie.indd 49 12年4月2日下午3:16

PVR (Personal Video Recorder)

Time Shift Function

This function allows the TV to virtually record the live viewing broadcast programme.

Using the Remote Control

You can shift playback to any point of the virtually recorded programme. The PVR Time Shift progress bar will be displayed on the screen for 15 seconds. Press the OK button to display the PVR Time Shift progress bar again.

or When playing,

• Press the

button repeatedly to speed up x 2 / x 4 / x 8 / x 16.

• Press the

button repeatedly to speed up x 2 / x 4 / x 8 / x 16.

• During fast forward / fast backward state, press the

button to return to normal playback.

or • Press the button to jump about 10% forward.

• Press the

button to jump about 10% back.

• During playback, press the button to display a still screen and then press the button again to resume playback.

• During fast forward / fast backward state, press the

button to return to normal playback.

OK During playback, press the OK button to display a still screen and then press the

button again to

resume playback.

If you want to exit the PVR Time Shift progress bar and return to the current live broadcast, press the

button and then press the button to confirm.

The ‘PVR Time Shift Progress Bar’

1 Indicates the status of the currently

displayed video (

/ / / )

2 Indicates the time lagging behind

the live broadcast (DVR reviewing)

3 Indicates the available recording

time on your USB storage device

4 Indicates the current time

3 4

If the transfer rate of the USB storage device is too slow for recording or time shift function, a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. The minimum transfer

speed is 5MB/s.

During normal TV viewing, you may press the button to virtually pause the live viewing broadcast programme if you want to go out for a while (e.g. going to the bathroom / kitchen). "

" will show on the screen.

When you have returned, press the

button to play the missed broadcast programme. " " will show on the screen.

The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed broadcast programme. It will soon turn to normal.

Alternative

Press the OK button to display the PVR Time Shift progress bar and then press the buttons to select " Play" on the bar. Press the OK button to confirm.

• Time Shift Mode and Recording functions may not work if the signal strength is weak.

• Stop the time-shift function before switching to another input source.

L22FEDN_P_R_W12_IB_120402_Annie.indd 50 12年4月2日下午3:16

PVR (Personal Video Recorder)

Recording DTV Programme onto a USB Storage Device

Use this function to record the DTV programme you are watching on the main screen and save it for future viewing.

The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the

button to record the programme that you are currently

watching.

Recording will stop automatically when the disk is full.

The recording progress bar will disappear after 15 seconds. To display the recording progress bar again, press the OK button or the

button.

2. Press the button to stop recording.

If you want to turn off your TV during recording, press the button. A dialogue will display.

Press the

buttons to select your desired option and then press the OK button to confirm.

If you select the middle option in the box, the screen will turn off but the recording will still in progress, the LED indicator will alternatively flash red and blue.

The recording is still inprogress. Do you want to switch off the TV?

Yes, Stop recording and

switch off the TV

Yes, turn off the screen

and sound but keep

recording the programme

L22FEDN_P_R_W12_IB_120402_Annie.indd 51 12年4月2日下午3:16

PVR (Personal Video Recorder)

4. The Schedule List will then be displayed with your preset reminders shown.

5. Press the GREEN button to return to the EPG.

6. Press the EXIT button to exit EPG.

2. Press the

button or the RED button on the remote control while on the

selected programme, the RECORDED menu will be displayed. Press the

buttons to select the settings in the RECORDED menu for the Channel,

Start time, End time and Mode.

Channel Press the buttons to select the channel that you

wanted to record.

Start time

(for Mode Once, Every Day, Weekly)

Press the

buttons to select the Minutes / Hour

/ Month / Date and then press the

buttons to

adjust the start time.

End time

(for Mode Once, Every Day, Weekly)

Press the

buttons to select the Minutes / Hour

/ Month / Date and then press the

buttons to

adjust the end time.

Mode Press the

buttons to select the Auto / Once /

Every Day / Weekly.

3. After finishing all the recorder adjustments, press the OK button to confirm your settings. A Timer Save Success screen will display.

Timer Programming

This function is used to perform scheduled recording.

The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast programme.

Please make sure the USB device is inserted. If not, a warning message will pop up.

1. Press the TV GUIDE button on the remote control. The EPG menu will appear.

10:00 11:00

Pinky and perky Frankenstei.. No information

2 BBC TWO My Fair Lady

7 BBC THREE This is BBC THREE

70 CBBC Channel Bear Behaving Badly Shaun the .. No information

80 BBC NEWS BBC News Our World: Stormchaser

105 BBC Red Button BBC Red Button

PROGRAMME GUDIE 1 BBC ONE

25 Dec 2008 10:06 10:00-10:15 Pinky and Perky

25 Dec

1 BBC ONE

DTV

Back

25 Date

RECORDED

1 BBC ONE

Start Time

10 Hour

25 Date

00 Minute

Dec Month

End Time

15 Minute

10 Hour

Dec Month

25 Date

Mode Once

• When the preset time is reached, the TV will start recording automatically.

• If a programme recording starts when the TV is in standby mode, the LED indicator will alternatively flash red and blue.

Timer Save Success

800 TVE 1

11 Mar 2008 10:00

Schedule List 15:30 10th Mar Delete

Time Date

Programme Title

Channel Name

Back

L22FEDN_P_R_W12_IB_120402_Annie.indd 52 12年4月2日下午3:16

PVR (Personal Video Recorder)

Play Recorded Programme

You can play a recorded programme from the recorded programme list or from a USB Storage Device.

1. Press the SOURCE button on the front right side panel of the TV or on the remote control and then press the

buttons to select the USB mode and

then press the OK button.

2. Press the

buttons to select MOVIE and then press the OK button.

3. Press the

buttons to select your storage device and then press the OK

button.

4. Press the buttons to select the "MY PVR" folder and then press the OK button.

5. Press the

buttons to select your recorded programme and then press the OK button. A tick box will be displayed. If you want to delete the file, press the RED button to enter the Sub Menu and then press the

button to confirm. Press the button to view.

6. Press the OK button or the INFO button to display the function bar.

7. Press the

buttons and then press the OK button to select the function: Pause / FB / FF / Prev. / Next / Stop / Repeat (Repeat All / Repeat Off / Repeat 1) / Set A / Playlist / Info / Aspect Ratio.

8. Press the EXIT button to return to the previous menu.

L22FEDN_P_R_W12_IB_120402_Annie.indd 53 12年4月2日下午3:16

Using the DVD Features

Using the Built-in DVD Player

1. Insert a disc with the label side facing towards the rear of the TV. (CD-R,

CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW) Allow 10 seconds for the player to load the disc. If you insert the disc wrongly, an error message will be displayed.

2. After the disc is inserted, the TV will change the input source to DVD automatically and Smart NAVl will show the content of the disc

automatically.

3. If the DVD player does not automatically play the disc, press the SOURCE button on the front right side panel of the TV or the INPUT button on the remote control to display the Source List. Use the

buttons to select DVD

and then press the OK button to confirm. Press the

button on the unit or

the

button on the remote control to start playing.

4. Press the

button if you want to remove the disc.

Compatible Disc Types

Disc Types Disc Logo Recorded Content

DVD-VIDEO (Digital Versatile Disc)

AUDIO + VIDEO

DVD±RW (Audio/Video format or JPEG files)

DVD+ReWritable

AUDIO + VIDEO + JPEG

DVD±R (DVD Recordable - Audio/Video format or JPEG files)

DVD+R

AUDIO + VIDEO + JPEG

CD-R (CD Recordable - Audio/Video format or JPEG files)

AUDIO + VIDEO + JPEG

CD-RW (CD-Rewritable - Audio/Video format or JPEG files)

AUDIO + VIDEO + JPEG

AUDIO-CD (Compact Disc Digital Audio)

AUDIO

Supported Formats

JPEG

• The file extensions has to be .jpg and not .jpeg.

• Pictures encoding must comply with JPEG/ISO format.

• This DVD player can only display DCF-standard still pictures or JPEG pictures such as TIFF.

Some recorded files may not be played due to the type and format

of the disc or condition of the recording.

Region Code

Both the DVD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.

The Region Number for this DVD player is described on the rear panel of the TV.

Disc Type DVD-VIDEO

Region code

Using the DVD Features

• Only insert 12cm discs. Do not insert or play 8cm discs; they will get stuck.

• Ensure disc is fully ejected before removing it, or else you risk damaging the DVD player.

Label side at

the back

Unable to play disc!

Check label faces rear of TV Check disc for marks or damage Check disc is compatible type.

L22FEDN_P_R_W12_IB_120402_Annie.indd 54 12年4月2日下午3:16

Using the DVD Features

Basic DVD Playback Functions

Playing the DVD

Depending on the disc, a menu may appear on the TV screen once the disc has loaded. When playing the disc, you may use the

button to toggle between Play and Pause mode. This product also supports Menu / Title / Sequential / Programme Playback.

Menu Playback (for DVD)

For DVD discs, the screen will display the DVD Disc Menu (Root Menu). Press the

button or the OK button to start from the highlighted content. Press the DVD MENU button to return to the Root Menu when playing the disc. For some DVD discs you may need to press the DVD MENU button or the DVD TITLE button to display the Disc Menu.

Stopping Playback

Press the button once to stop. Press the button to resume from where you stopped. Press the

button twice to stop. Press the button to start from the beginning.

In order to protect the disc, press the

button and then press the button to eject the disc. When the disc is ejected, hold the disc edge slightly and remove it from the disc slot. When not using the DVD function (in stand-by-mode or using others modes for a long period of time), please take out the disc to protect the DVD loader and the disc.

Previous / Next (for DVD / CD / Multimedia discs)

Press the button to play the last Title / Chapter / Track. Press the

button to play the next Title / Chapter / Track.

If the current track is the first one, pressing the button will restart the disc from the beginning.

If the current track is the last one, pressing the

button will stop the playback.

There will be no sound during forward or backward.

For DVD discs, the above functions may very due to different DVD disc’s structure.

Forward / Backward (for DVD / CD / Multimedia discs)

There are 4 speeds for forward. Press the button to toggle between the dierent forward options in sequence. (FORWARD x 2 / FORWARD x 4 / FORWARD x 8 / FORWARD x 16 / FORWARD x 32 / Play). Press the

button to return to normal speed playback.

For DVD discs, when selecting backward to first title / chapter, the disc will start from the beginning.

Pause (for DVD / CD / Multimedia discs)

• For CD / JPEG discs, press the button to pause; press the button again to resume playback.

• For DVD discs, press the

button to pause; press the button again to resume playback.

Repeat (for DVD / CD / Multimedia discs)

Press the REPEAT button once to display the current repeat mode.

• For CD discs, while playing in sequence, you may use the repeat playback. There are 2 repeat modes, press the REPEAT button

to toggle between the different repeat functions (REPEAT TRACK / REPEAT ALL / REPEAT OFF).

• For DVD discs, you may setup the repeat playback mode. There are 3 repeat modes, press the REPEAT button to toggle

between the different repeat functions (REPEAT ALL / REPEAT TITLE / REPEAT CHAPTER).

For example, if there are two movies on the disc. REPEAT ALL: will repeat two movies REPEAT TITLE: will repeat only one selected movie REPEAT CHAPTER: repeat only one selected chapter of movie

• For MP3 / JPEG discs, while playing the disc, you may use the repeat playback. There are 4 repeat modes, press the REPEAT

button to toggle between the different repeat functions (REPEAT ONE / REPEAT FOLDER / FOLDER / SINGLE).

L22FEDN_P_R_W12_IB_120402_Annie.indd 55 12年4月2日下午3:16

Using the DVD Features

Press the DISPLAY button four times to display the four page as shown below:

For some discs, only Time can be selected in the GOTO function.

Info (for DVD / CD / Multimedia discs)

Press the DISPLAY button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information.

For DVD discs, press the DISPLAY button once to display the first page as shown below:

Title Elapsed TT 02/11 CH 05/10

00:02:56

Title Remain TT 02/11 CH 05/10

00:01:42

Chapter Elapsed TT 02/11 CH 05/10

00:03:05

Chapter Remain TT 02/11 CH 05/10

00:01:33

Press the DISPLAY button twice to display the second page as shown below:

Press the DISPLAY button three times to display the three page as shown below:

Angle (for DVD)

Allows you to switch the viewing angle of video.

Press the ANGLE button repeatedly to select the different angle you want (Only for the discs has this character).

Zoom (for DVD)

Allows you to select the video size of programme stream.

Press the DVD ZOOM button to select the size you want.

Goto (for DVD / CD / Multimedia discs)

This function allows you to play your favourite Title / Chapter / Time. Press the GOTO button to activate the on screen scroll-down menu for selecting. Input your Title / Chapter / Time by pressing the 0-9 buttons or input the playback time. After editing, press the OK button to start. If the input is invalid, it will not function.

Some discs may contain multiple languages which can be selected

by pressing the AUDIO button.

Audio (for DVD / CD)

Press the AUDIO button to toggle between different audio modes in sequence.

For CD discs: Stereo / MonoL / MonoR.

Repeat A-B (for DVD / CD)

When playing DVD, CD disc, press the A-B button to repeat certain content. Press the A-B button on the start point (A) and the end point (B) to select the repeat part. Press the A-B button a third time to cancel the A-B button function and return to normal playback.

L22FEDN_P_R_W12_IB_120402_Annie.indd 56 12年4月2日下午3:16

Using the DVD Features

Playing Multimedia Discs

After loading the multimedia disc, the disc contents will automatically be displayed and sorted by different file formats into Music / Picture / Video folders.

1. Press the

buttons to navigate through the folders and files.

2. Press the 0-9 buttons to select the contents directly (for example, to select track 23, press the OK button twice followed by 3).

3. When playing or pausing with picture playback, you may use the

buttons to flip / rotate the picture.

L22FEDN_P_R_W12_IB_120402_Annie.indd 57 12年4月2日下午3:16

Using the DVD Features

Using the DVD General Setup Page

In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the General Setup Page menu, and then press the

buttons to select the menu options. Press the DVD SETUP button to exit the menu.

In Setup mode, the disc playback function will not be available.

Option Description

- - General Setup Page - TV Display 16 : 9 OSD Lang ENG Screen Saver On Last Memory Off

4 : 3 / PanScan 4 : 3 / LetterBox Wide

TV Type 4:3 Pan Scan

Widescreen picture shown in the full screen with some part cut.

4:3 Letter box

Widescreen picture shown in the full screen with black bars on the top and bottom of the screen.

16:9 Wide

Widescreen picture shown in the full screen.

- - General Setup Page - TV Display 16 : 9 OSD Lang ENG Screen Saver On Last Memory Off

English French German Spanish Italian Protuguese

OSD Set the OSD language to your language of choice

- - General Setup Page - TV Display 16 : 9 OSD Lang ENG Screen Saver On Last Memory OffOnOff

Screen Saver When the player stops or the picture becomes motionless for

a couple of minutes, there will be a screen saver to prevent damage to the display screen.

ON: To activate screen saver.

OFF: To disable screen saver.

- - General Setup Page - TV Display 16 : 9 OSD Lang ENG Screen Saver On Last Memory Off On

Off

Last Memory ON: Shutdown the TV before the settings for memory,

re-boot the machine setting.

OFF: Every time the TV automatically switched back to the

default settings.

The default language is English.

L22FEDN_P_R_W12_IB_120402_Annie.indd 58 12年4月2日下午3:16

Using the DVD Features

Using the DVD Audio Setup Page

In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Audio Setup Page menu, and then press the

buttons to select the menu options. Press the DVD SETUP button to exit the menu.

In Setup mode, the disc playback function will not be available.

Option Description

- - Audio Setup Page - Speaker Setup Dual Mono Dynamic

- - Audio Setup Page - Downmix STR

LT/RT Stereo

Speaker Setup / Downmix

LT/RT

Mixed stereo LT/RT output.

Stereo

Mixed stereo surround output.

- - Audio Setup Page - Speaker Setup Dual Mono Dynamic

Stereo L-Mono R-Mono Mix-Mono

Dual Mono This is used to select the Stereo, L-Mono, R-Mono and Mix-

Mono.

- - Audio Setup Page - Speaker Setup Dual Mono Dynamic

FULL

3/4

1/2

1/4

OFF

Dynamic This is used to set the compression ratio in order to control the

sound (volume) contrast.

L22FEDN_P_R_W12_IB_120402_Annie.indd 59 12年4月2日下午3:16

Using the DVD Features

This function is available only when the discs

have ratings encoded on them.

Using the DVD Preference Setup Page

In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Preference Setup menu, and then press the

buttons to select the menu options. Press the DVD SETUP button to exit the menu.

In Setup mode, the disc playback function will not be available.

Option Description

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

PAL Multi NTSC

TV Type In order for the disc to play, the colour system of the DVD

player, disc and TV should match.

PAL

This is the format used in UK.

Multi

This format can be used if your TV / DVD is capable of both PAL and NTSC formats and this is the default setting.

NTSC

This format is used by some other countries, e.g. USA.

- - Preference Page - TV Type Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

English French German Spanish Italian Protuguese

Audio Set the Audio language to your language of choice.

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

English French German Spanish Italian Protuguese Off

Subtitle Select the Subtitle language.

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

English French German Spanish Italian Protuguese

Disc Menu Select the Disc Menu language.

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

1 KID SAF 2 G 3 PG 4 PG13 5 PGR 6 R 7 NC17 8 ADULT

Parental Allows the user to set a maximum rating level for a movie

that can be played (e.g. PG rating). Movies rated higher than the level set will not be played. The parental lock can only be changed after inputting the correct password.

PAL format is generally used for TV’s in the UK.

If NTSC is selected with a non-compatible television, you may experience interference or picture scrolling.

Not all DVD discs support multiple audio

languages.

Not all DVD discs support multiple audio

languages.

The default language is English.

L22FEDN_P_R_W12_IB_120402_Annie.indd 60 12年4月2日下午3:16

Using the DVD Features

Option Description

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default

Change

Password Password Change

To change the password, you need to:

1. Input old password. (for initial use, please enter factory default password “136900”)

2. Input a new 6 digit password and then press the OK button to confirm.

- - Preference Page - TV Type Multi Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default Reset

Default Default

To restore all setup parameters to the factory settings EXCEPT the password. This function is available in stop state or when the tray is opened.

L22FEDN_P_R_W12_IB_120402_Annie.indd 61 12年4月2日下午3:16

Maintenance, Hints and Tips, Specication

1. Use a soft dry cloth to wipe away the dust from the screen and surfaces.

2. If the surfaces are extremely dirty, clean the TV with a cloth which has been

dipped in a weak soapy water. Wring the cloth until it is almost dry, then use it to wipe the TV.

3. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the TV on.

Maintenance

Careful and regular cleaning can prolong the life of your TV.

Be sure to press the STANDBY button on the front right side panel of the

TV or the

button on the remote control to turn off the TV. Disconnect

the mains adapter from the mains socket before cleaning.

Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals.

Do not use compressed air to remove dust.

Maintenance

Handling Discs

• Do not touch the playback side of the disc.

• Do not attach paper or tape to the disc.

Playback side

Cleaning Discs

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.

• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray. They may damage the disc.

Storing Discs

• Do not store discs in places subjected to direct sunlight or near heat sources.

• Do not store discs in places subjected to moisture and dust such as a bathroom or near a humidifier.

• Storing discs vertically in a case, stacking discs or placing objects on discs outside of their cases may cause warping.

L22FEDN_P_R_W12_IB_120402_Annie.indd 62 12年4月2日下午3:17

Maintenance, Hints and Tips, Specication

Hints and Tips

The following table contains various hints and tips to get the best performance from your TV. If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

The TV does not operate properly.

The TV does not respond when pressing any buttons

• The TV may freeze up during use. Disconnect the mains adapter from the mains socket for a few minutes. Reconnect the mains adapter and try to operate it again as usual.

TV cannot be switched on

• Check that the TV is connected to the mains supply and the POWER ON/OFF switch which is located at the front right side under the frame is switched on.

• Make sure all connected AV devices are switched off before switching on your TV.

The remote control does not work

• Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV.

• Ensure that the batteries are installed with the correct polarity (+ to +, - to -).

• Install new batteries.

Power is suddenly turned off

• Check the power of the TV. The mains supply maybe interrupted.

• Check if the sleep timer is set.

• Check whether the Auto Standby is activated.

The video function does not work.

No Picture & No Sound

• Check whether the TV is switched on.

• Try another channel. The problem may be caused by the broadcaster.

Picture appears slowly after switching on

• This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.

No or poor colour or poor picture

• Adjust the settings in the PICTURE menu.

• Try another channel. The problem may be caused by the broadcaster.

• Check if the video cables are connected properly.

Horizontal / Vertical bar or picture shaking

• Check for local interference such as an electrical appliance or power tool.

Poor reception on some channels

• Station or cable channel may be experiencing problems, tune to another station.

• Station signal is weak, reposition the aerial for better reception.

• Check for sources of possible interference.

Lines or streaks in pictures • Check aerial (Change the position of the aerial.)

No pictures when connecting HDMI • Check if the input source is HDMI.

Picture appears in wrong ratio

• Adjust the Aspect Ratio settings in the OPTION menu or press the ASPECT button on the remote control.

The audio function does not work.

Picture OK but no sound

• Press the VOL + / – buttons.

• Sound muted? Press the

MUTE button.

• Try another channel. The problem may be caused by the broadcaster.

No output from one of the speakers • Adjust the Balance settings in the SOUND menu.

Unusual sound from Inside the TV

• A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV.

No sound when connecting HDMI • Check if the input source is HDMI.

Audio noise • Keep the RF coaxial cable away from the other connected cables.

Password

Lost password

• Select the Set Password setting in the LOCK menu, then enter the following master password “8899”. The master password clears your previous password and allows you to enter a new password.

Hints and Tips

L22FEDN_P_R_W12_IB_120402_Annie.indd 63 12年4月2日下午3:17

Maintenance, Hints and Tips, Specication

There is a problem in PC mode.

The signal is out of range (Invalid format)

• Adjust the resolution, horizontal frequency, or vertical frequency.

Vertical bar or stripe on background & Horizontal Noise & Incorrect position

• Use Auto configure or adjust clock, phase, or H/V position.

Screen colour is unstable or shows a single colour

• Check the signal cable.

• Reinstall the PC video card.

The DVD function does not work.

DVD will not read the disc

• Check if the disc is correctly inserted.

• Check that the disc is clean.

• Check if there is any obvious damage to the disc.

• Try to play the disc on another DVD to check whether it is has content.

DVD does not have the signal • Check if the TV is in DVD mode.

Lost DVD password

• Select Password in the Preference Page of DVD menu, then enter the following master DVD password “136900”. The master password clears your previous password and allows you to enter new password.

FAQs (Frequently Asked Questions)

Why have I lost some / all of my channels?

• It happens sometimes if you have a weak signal. Usually it just means you’ll need to rescan your digital box or TV. Don’t worry, it easy to do. And once you’ve done it, you should get all the Freeview channels available to you. If problems persist you may need to get your aerial checked. Talk to your retailer or contact your local aerial installer.

Why do I get ‘blocking’ on my digital picture?

• In most cases, blocking is caused by a reception problem – either the signal is too weak or there is some kind of interference. Talk to your retailer or contact your local aerial installer.

• Blocking can also be caused by a digital signal that is too strong. If you are still experiencing blocking and the signal is strong, consult your local aerial installer for advice.

Can I watch Freeview using a portable set-top aerial?

• Some, but only a few, homes may be able to use a set top aerial. However, for a much better reception, we strongly recommend that you use a rooftop aerial.

• If you do not have access to a rooftop aerial – for example, if you rent a flat and the aerial is the responsibility of your landlord, or if you’re using a second TV in the bedroom and don’t want the hassle and expense of using extension cables, a set – top aerial may be your only option.

What type of aerial do I need?

• If you are installing a new aerial, we recommend a wideband rooftop aerial rather than a loft aerial. Loft aerials generally receive a weaker digital signal and are more likely to get interference from other electrical devices in the home. We suggest you have an aerial survey done before getting an aerial upgrade.

• Talk to your retailer or contact your local aerial installer.

L22FEDN_P_R_W12_IB_120402_Annie.indd 64 12年4月2日下午3:17

Maintenance, Hints and Tips, Specication

Display Modes

The screen resolution has been optimised during production for the display modes listed below.

YPbPr Mode

Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 720 x 480

Auto / Smart Zoom / Zoom / 16:9 /

4:3 / Full / Subtitle

480P: 720 x 480

576I: 720 x 576

576P: 720 x 576

720P: 1280 x 720

1080I: 1920 x 1080

1080P: 1920 x 1080

PC Mode

Please check the display settings of your computer before connecting to the TV. If the display setting of your computer does not match the TV, there may be no video.

Resolution Vertical Frequency (Hz) Aspect Ratio

640 x 480

4:3 / 16:9 / Full

800 x 600

1024 x 768

1360 x 768 60

1920 x 1080 60

HDMI Mode

Resolution Vertical Frequency (Hz) Aspect Ratio

480I: 1440 x 480 60

Auto / Smart Zoom / Zoom / 16:9 /

4:3 / Full / Subtitle

480P: 720 x 480 60

576I: 1440 x 576 50

576P: 720 x 576 50

720P: 1280 x 720

1080I: 1920 x 1080

1080P: 1920 x 1080

Display Modes

L22FEDN_P_R_W12_IB_120402_Annie.indd 65 12年4月2日下午3:17

Maintenance, Hints and Tips, Specication

Specications

Model L22FEDN12 / L22FEDP12 / L22FEDR12 / L22FEDW12

Panel System 22 inch LED Panel

Display Resolution 1920 pixels (horizontal) x 1080 pixels (vertical)

Television System PAL I / BG / DK SECAM L / BG / DK

Brightness 250 cd/m

Contrast Ratio 1000 : 1

Power Source DC12V 3.5A

Energy Efficiency Class B

Screen Size (measured diagonally) 21.5" (55cm)

Power Consumption (In HOME / STANDBY mode)

37W/ <0.5W

Average Annual Energy Consumption 54.00 kWh / annum

Standby Power Consumption <0.5W

Operating Temperature 0°C – 50°C

Operating Humidity 10% – 80%

Mercury Content (mg) X

Presence of Lead √

Reference Period 2010/1062 – 2011

Speaker Power 2 x 3W, 4OHM

Dimension( W x D x H) with base 530 x 170 x 386 mm

Weight (Net) 4.4 kg

Inputs / Output

SCART 1

HDMI 1

PC IN 1

PC AUDIO 1

YPbPr 1

Common Interface 1

AV 1

USB 1

ADUIO IN (RCA) 1 (L + R)

AERIAL IN 1

Coaxial 1

Features and specifications are subject to change without prior notice.

Specifications

L22FEDN_P_R_W12_IB_120402_Annie.indd 66 12年4月2日下午3:17

Maintenance, Hints and Tips, Specication

A B C D E F G

ENERG

YIEIJA

2010/1062 - 2011

54,00

kWh/annum

Wa

21.5

inch

L22FEDR12L22FEDP12

L22FEDW12L22FEDN12

L22FEDN_P_R_W12_IB_120402_Annie.indd 67 12年4月2日下午3:17

Safety Warnings

• Read all the instructions carefully before using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

Damage

• Please inspect the unit for damage after unpacking.

• Do not continue to operate the unit if you are in any

doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains adapter and consult your dealer.

Location of Unit

• The unit must be placed on a flat stable surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature

• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames

• Never place any type of candle or naked flame on the top of or near the unit.

Moisture

• To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains adapter and consult your dealer.

Ventilation

• To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

• Make sure that there is a gap of at least 10 cm on both sides and a gap of 20 cm at the top.

Safety

• Always disconnect the unit from the mains supply before connecting / disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm.

Mains Adapter Cable

• Make sure the unit or unit stand is not resting on top of the mains adapter cable, as the weight of the unit may damage the mains adapter cable and create a safety hazard.

Mains Adapter

• The mains adapter will continue to draw electricity from the mains supply when plugged in the mains socket. In the interests of safety and to avoid unnecessary energy consumption, never leave the adapter plugged in the mains socket while unattended for long periods of time. Disconnect the adapter from the power supply.

Interference

• Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Optimum viewing

• View the unit in moderate light to prevent eye strain. It is recommended to watch the unit from a distance 3-7 times that of the screen height.

LCD screen

• The LCD screen is manufactured using high-precision technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.

Screen Burn

• A characteristic of Plasma and TV Panels is that displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen.

• Examples of images that you need to watch out for are as follows (this is not an all-inclusive list):

1. Black Bars: If black bars appear at the left / right or

top / bottom of the screen, it is recommended to change the format so that the picture fills the entire screen.

2. TV Channel Logos: e.g. Shopping channel logos

and pricing displays - especially if they are bright and stationary. Moving or low-contrast graphics are less likely to cause ageing of the screen.

3. Time Displays

4. Teletext: Do not view a stationary page for long

periods of time.

5. TV Menus

6. Pause Mode: Do not leave the screen in pause

mode for long periods of time, e.g. when watching videos.

10 cm 10 cm

20 cm

10 cm

Safety Warnings

L22FEDN_P_R_W12_IB_120402_Annie.indd 68 12年4月2日下午3:17

Safety Warnings

• To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.

Standby

• The

button on the remote control does not switch off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Disconnect the mains adapter from the mains socket.

Batteries

• Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous.

• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.

• Please dispose of batteries correctly by following the guidance in this manual.

• The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Supervision

• Children should be supervised to ensure that they do not play with the unit and the remote control.

• Never let anyone especially children push anything into the holes, slots or any other openings in the case this could result in a fatal electric shock.

DVD

• Class 1 Laser Product

This unit utilises a laser. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Before moving the unit, ensure the disc tray is empty.

• Always remove the disc when the unit is not in use.

• Failure to do so will risk severely damaging the disc

and the unit.

• Do not stack devices, heat from other devices may aect the performance of the unit.

CLASS 1

LASER PRODUCT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service

• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance

• Ensure to unplug the unit from the mains socket before cleaning.

• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.

• The wall socket plug is used as a disconnect device, the

disconnect device should be readily accessible.

•

This equipment is a Class II or double insulated

electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

L22FEDN_P_R_W12_IB_120402_Annie.indd 69 12年4月2日下午3:17

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where you purchased the product.

Rovi Proprietary Rights

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Restriction on Use & Rovi Trade Mark Rights

Use of the copyright protection technology contained in this product must be authorised by Rovi Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Rovi Corporation. The names “Rovi Corporation” and “Macrovision” are protected by trademarks.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

The “HD Ready” logo is a trademark of DIGITALEUROPE.

SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialogue.

TruSurround HD, SRS and the

symbol are trademarks of SRS Labs, Inc.

All trademarks are the property of their respective owners and all rights are acknowledged.

DSGRetailLtd•MaylandsAvenue•HemelHempstead

Herts•HP27TG•England

(P.N.: S17011064G)

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit

www.partmaster.co.uk or call 0844 800 3456 (UK customers only). Calls charged at National Rate.

If you require a replacement for any of the items listed below, please quote their corresponding part numbers:

Replacement Part Part Number

TV Base

S11191060G (L22FEDW12) S11191052G (L22FEDN12) S11191061G (L22FEDP12) S11191054G (L22FEDR12)

Main Adapter S10051231G

Remote Control

S10090071G (L22FEDW12) S10090072G (L22FEDN12) S10090073G (L22FEDP12) S10090074G (L22FEDR12)

Battery S16150012G

Component Adapter Cable S09090005G

Screw A S15022036G

L22FEDN_P_R_W12_IB_120402_Annie.indd 70 12年4月2日下午3:17

L22FEDN_P_R_W12_IB_120402_Annie.indd 71 12年4月2日下午3:17

L22FEDN_P_R_W12_IB_120402_Annie.indd 72 12年4月2日下午3:17

Logik L22FEDN12, L22FEDP12, L22FEDR12, L22FEDW12, L22FEDV12 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual