Logic3 Pro Command GP296 User Manual

GP296

Pro Command

Wireless Gaming Headset

USER'S MANUAL

-1-

Thank you for purchasing the Logic3 PRO Command Wireless Headset with

Microphone. As with all Logic3 products it has been built to the highest
manufacturing standards and tested throughout its development, to ensure
you get the best possible product. Please read through and familiarize yourself
with this manual before you use the PRO Command Wireless Headset with
Microphone.

EN

PRO Command Wireless Headset with Microphone (GP296)

Contents

PRO Command
Wireless Headset

Receiver

RCA to 3.5mm

Xbox Connector

USB Charge Cable

3.5mm to 3.5mm

1. Microphone Connec tion LED status

2. Game/Chat Mode (Swi tches Game
or Chat mode)

3. 2.5mm socket

4. Volume Controls

5. Microphone Mute Toggles ON/OFF

6. Power ON/OFF

7. Mini USB Charging Por t

8. LED Charging Status

1

2

3

4

5

6

7

8

-2-

9. Connection Status L ED

10. 3.5mm jack

11. USB Connector

12. Left/Right RCA

13. 3.5mm Audio in socket

9

10

11

12

13

No drivers are needed to s et up the PRO Command Wireless Headset with PC/MAC/Xbox or PS3

1. Firstly you need to cha rge the Wireless Headset:

Set up of PRO Command Wireless Headset with Microphon e

Charging

Fully Charged

4hrs

USB Charge Cable

1. Turn on your PC.

2. Connect the receive r's USB connector to a spare USB port on you r PC/MAC (Receiver's LED
(Green) will flash slo wly)

3. Ensure the headset is w ithin 50cm of the receiver.

4. Press the ON/OFF button on your Headset to power it ON (Microph one connection LED
(Green) will flash slo wly – once every 2 seconds)

5. Pairing - First time co nnection only:­ a. Switch the Mode to 'CHAT', press and ho ld the Volume '+' and '-', simultaneous ly for 3 seconds.
b. Microphone connec tion Green LED will flash quickly
c. Receiver and Microp hone connection LED will then light up permanently 'Green' (bot h of these
LED status's show conn ection established)

Next time when you conne ct you will not have to complete step 5A-C , as it will automatically pa ir
once you turn on the power.

PC/MAC

6. Your PRO Command Wirele ss Headset is now ready to use, p lease set up the PC/MAC (Audio
Set up) to use the Wireles s PRO Command headset:-

a. Right click 'Speake r' icon (Bottom right hand corner of Scr een)
b. Select 'Playback de vices'
c. A new Window will open

PC

-3-

d. Select 'Pro command W ireless Headset' and 'Apply'
e. Next go to the 'Recordi ng' Tab
f. Select 'Pro command W ireless Headset' and 'Apply'

Above instructions a re based on Windows 7, other Operating S ystems may differ

MAC
Note: Game volume control will be de-activated while in PC / Mac mode

1. Turn on your PS3

2. Connect the receive r's USB connector to a spare USB port on you r PS3 (Receiver's LED
(Green) will flash slo wly)

3. There are 2 ways to connect the receiv er to your PS3:-

Method 1

a. Using the 3.5mm to 3.5m m cable, connect one side of the 3.5mm jac k to the rear of the receiver
b. Connect the other 3.5 mm jack to your headphone socket of your TV

Method 2

a. Using the 3.5mm to RCA cab le, connect one side of the 3.5mm jack to th e rear of the receiver
b. Connect the male RCA con nectors Left/Right (White/Red) t o the A/V input of your TV
c. Connect the PS3 A/V cabl e Left/Right (White/Red) into the en d of the RCA connectors
(White/Red)

4. Ensure the headset is w ithin 50cm of the receiver.

5. Press the ON/OFF butt on on your Headset to power it ON (Microph one connection LED
(Green) will flash slo wly – once every 2 seconds)

-4-

6. Pairing - First time co nnection only:­a. Switch the Mode to 'CHAT', press and ho ld the Volume '+' and '-', simultaneous ly for 3 seconds.
b. Microphone connec tion LED (Green) will flash quickly
c. Receiver and Microp hone connection LED will th en light up permanently 'Green' (bot h of these
LED status's show conn ection established)
Next time when you conne ct you will not have to complete step 6A-C , as it will automatically pa ir
once you turn on the power.

7. Your PRO Command Wirele ss Headset is now ready to use, p lease set up the PS3 (Audio Set
up) to use the Wireless PR O Command headset:­ a. Press the PS button on yo ur PS3 controller to access the menu on th e PS3
b. Go to the 'Settings' menu on the PS3
c. Select 'Accessory D evices'
d. Select 'Audio Devic e Settings'
e. Select 'Input Devic es'
f. Select the 'Pro Comma nd Headset'
g. Press 'X' to confirm
h. Move to 'Output Devic es'
i. Select the 'Pro Comma nd Headset'
j. Press 'X' to confirm
k. Select OK
Above instructions a re based on firmware ver. 4.46, other fir mware versions may differ

Xbox / Xbox 360

1. Turn on your Xbox/Xbox 360

2. Connect the USB conne ctor to a spare USB port on your Xbox (Micro phone receiver LED
(Green) will flash slo wly)

3. Using the 3.5mm to RCA cab le, connect one side of the 3.5mm jack int o the rear of the receiver

4. Connect the male RCA con nectors Left/Right (White/Red) t o the A/V Input of your TV

-5-

5. Connect the Xbox A/V cab le Left/Right (White/Red) into the R CA connectors.

6. Connect the Xbox conn ector to your Xbox controller and conn ect the 2.5mm jack into the 2.5mm
socket on the right side o f the PRO Command headset.

7. Ensure the headset is w ithin 50cm of the receiver.

8. Press the ON/OFF button on your Headset to power it ON (Microph one connection LED (Green)
will flash slowly – once e very 2 seconds)

9. Pairing - First time co nnection only:­ a. Switch the Mode to 'CHAT', press and ho ld the Volume '+' and '-', simultaneous ly for 3
seconds.
b. Microphone Connec tion LED (Green) will flash quickly
c. Receiver and Microp hone connection LED will then light up permanently 'Green' (bot h these
LED status shows conne ction established)
Next time when you conne ct you will not have to complete step 9A-C , as it will automatically pa ir
once you turn on the power.

10. Your PRO Command Wirel ess Headset is now ready to use .

11. Please ensure you have chosen the co rrect settings in your Xbox/Xbox360 menu to allow you
to use the Pro Command Hea dphones.

Force connection - If the headset d oes not respond to any commands, pleas e carryout the
following:

1. Close down the applic ation used i.e. music playe r, or game on console.

2. Ensure the headset is w ithin 50cm of the receiver.

3. Switch the Mode to CHAT and press and hold the Volume '+' a nd '-', simultaneously fo r 3 seconds.

4. Microphone connec tion LED (Green) will flash quickly

5. Receiver and microp hone connection LED will th en light up permanently 'Green' (bot h these LED
status shows connect ion established)

Game and Chat Modes

To offer comfort and practicality, you can adjust the v olume settings individu ally for Gaming or
Chat modes.

Low battery Alert:

When the battery is low, th e microphone connection LED (Green ) indicator will flash once e very 1
second, to indicate th e low battery status.

Sleep mode:

When the headset has not b een used for three minutes or more, the he adset will automaticall y go
into sleep mode. The Microphone con nection LED (Green) will fl ash once every five seconds.
To resume normal functio n, press the Volume “+” and “-“buttons si multaneously this will ex it the
sleep mode.

Anti-Jamming

With auto frequency ad justment technology, the headset will adjust the f requency to unoccupied
frequency to avoid jam ming from the common jamming source of W IFI, Microwave, 2.4G wireless
telephone.

-6-

Trouble Shooting

Specifications:

1. Compatible with PC/ PS3/XBOX360

2. 2.4GHz Technology with auto freque ncy adjustment for Anti -Jamming.

3. Operational range u p to 7M

4. Built-in Lithium- ion rechargeable batter y: 3.7V/7 80mAh

5. Working current: <50mA, sleepi ng current: 200uA

6. Approximately 10 hou rs per one charge

L3i Ltd

Rhodes Way, Watford Herts

WD24 4YW UK

Tel: [phone]

http:/www.gamespower.com

E-mail: [e-mail]