Loewe 3781 ZW, 32, 6381 ZW, 5381 ZW User Manual

Aventos 3781 ZW
Aventos 3981 ZW
Mimo 32
Vitros 6381 ZW
Xelos 5381 ZW
Operating instructions.
233–29804.025
1
Contents
Remote control – TV functions 3
Control panels 4 – 5
Rear connections 5
Welcome 6
Thank you TV equipment Setup Cleaning
For your own safety 7 – 8
Initial installation 9
Batteries – remote control Connection Switching on Initial installation
Daily handling 10
Switching on/off 10 Changing channels 10 General menu operation 11 Adjusting the sound 11 Adjusting the picture 11 Operation on the set 11
Modes of operation 12 – 17
TV mode 12 Picture in picture 13 EPG mode 14 –15 Teletext mode 16 Video mode 17
Operating additional equipment 18 – 20
Logging in and connecting AV equipment 18 Video playback 19 Loewe video recorders and direct operation of Loewe DVD players 20
What to do if … 21 – 22
Technical data 23
Mechanical data Electrical data
Accessories available 24
Service addresses 25
2
Remote control – TV functions
Indicator: Operate VCR Indicator: operate DVD
Direct operation
select for VCR/DVD/TV
PIP operation on/off
Video operation with
video operating line
on/off
Call up menu
/in the menu: back
Teletext mode on/off
Select programme up/down
/in the menu: select up/down
Radio mode on/off
Picture menu
Switch on/off – in standby mode
Sound off/on (Mute) EPG operation on/off
Select programme directly /in the menu: numeric input
SV
LP
=
V
Control 150
000
2
5
8
3
6
9
VTR
DVD
1
4
7
0
Blend in programme, time, title of the broadcast
M
E
T
OK
OK
i
/in the menu: blend out menu Call up main information
/in the menu: switch info texts on/off
Call programme overview /in the menu: confirm
Set volume – / + /in the menu: select or adjust left/right
Personal teletext pages
on/off
Set picture format
only in sets with
Picture In Picture function
Programme info on/off
Last programme
You can assign other functions to these keys for TV operation. Assign these functions in the TV menu under – Settings – Function Keys.
33
Control panels
Aventos
On/Off key
Standby indicator
Operating indicator
Channel up/down /in a menu: adjust
To display menu
Connections on the right side of the TV set
Audio input (white=left,
+
red= right)
Video input AVS (CVBS)
Video input AVS (Y/C, CVBS)
Headphones socket
Connections on the right side of the TV set
Mimo
Vitros
4
To display menu
Channel up/down /in a menu: adjust
Operating indicator
Standby indicator
+
M
+
On/Off key
On/Off key
To display menu
Channel up/down /in a menu: adjust
Standby indicatorOperating indicator
Video input AVS
(Y/C, CVBS)
Headphones socket
Video input AVS (CVBS)
Connections on the right of the TV base
Video input AVS
(Y/C, CVBS)
Headphones socket
Video input AVS (CVBS)
Audio input (white=left,
red= right)
Audio input (white=left,
red= right)
Xelos
Connections on the right of the TV base
+
On/Off key
Operating indicator
Rear connections
Antenna socket 2nd satellite tuner
Antenna socket 1st satellite tuner
Antenna socket for antenna or cable system.
If no PIP tuner is fitted, insert antenna plug
of your antenna or cable installation here.
If a PIP tuner is fitted, insert antenna plug
Antenna socket for picture-in-picture (PIP).
of your antenna or cable installation here.
from PIP tuner (splitter) here.
Standby indicator
Connection for IR link
Insert antenna plug
Channel up/down /in a menu: adjust
To display menu
and output for
remote control signal
VGA-input
(RC5/RC6)
SAT
SAT A/D
Connection
Loewe audio systems
RC5/RC6
IR
VHF/UHF
SERVICE
VGA
AUDIO IN
AUDIO OUT
Service socket/
Video input AVS
Headphones socket
Sockets for video
recorder, DVD,
decoder etc.
(Euro-AV)
AV2/RGB
AV1
R
L
SUBWOOFER STAND
(Y/C, CVBS)
Video input AVS (CVBS)
DIG IN
1
2
DIG OUT
AV3
C
SUB
SUR
Audio input (white=left,
red= right)
Digital tone inputs Dolby digital module
Digital tone output Dolby digital module
External audio input
Audio output sockets
Connection for active center speaker Dolby digital module
R
L
Connection for active surround speakers Dolby digital module
depending on equipment and type of set or retrofittable
Connection for subwoofer in the stand,
Loewe active loudspeaker systems
or Home Automation
Connection for
special subwoofer
Dolby digital module
5
Welcome
Thank you,
for choosing a Loewe product. We are very happy to have you as a cus­tomer.
Loewe combines high quality in technology, design and user friendliness. This applies equally for TV, video and accessories. Neither the technology nor the design are an end in themselves but serve to give our cus­tomers pure watching and listening enjoy­ment. We have not allowed ourselves to be led astray by short-lived fashion trends in the design. You have, after all, purchased a high­quality piece of equipment which you don’t want to get tired of looking at tomorrow or the day after.
About the set We have designed the TV set in such a way that it is easy to operate with menus. If you need information about how to operate it, just display the info texts with the i button, you will soon get a grasp of the relationships.
You will find the answers to many tech­nical questions in the index of your TV set. If it’s a matter of operating the TV, you can access a function directly from the index. This saves you from having to read through detailed operating instruc­tions and is the reason why this operat­ing manual you are reading only explains the most important operating steps.
TV equipment
This operating manual describes the maximum equipment. Functions marked by all TV sets. The illustrated menu contents may vary de­pending on the TV equipment. You can find out what equipment your TV has in the main information – ”Technical spec. of TV set”.
are not available in
Setup
Handholds are provided on the front right and left sides of the Vitros und Mimo TV sets. Use these handholds to carry the TV set. Do not carry the Vitros set by the base, as the decora­tive grid could be damaged.
Please note that the feet of the TV set could leave marks on soft wood furniture (e.g. deal, pine, fir etc.) due to the weight and moving the set about. The plastic material of the feet contains softeners which could in some cases etch the surfaces of furniture. In such cases you should place a firm under­lay about the same size as the base of the TV set underneath it.
Please also read and observe the safety in­structions on the following pages.
Make sure no bright light or sunlight falls on the screen and impairs the picture by reflec­tions.
Cleaning
Clean the TV set only with a damp, soft, clean cloth (never use aggressive or abrasive cleaning agents).
Disposal
Packaging and boxes
You have chosen a very high-quality, long- lasting piece of technical equipment. In compli- ance with national regulations, we have paid a fee to authorized disposal companies who will collect the packing from the dealers. Neverthe- less we recommend that you keep the original box and packing material so that the TV set has optimum protection if you have to transport it.
The set
Please consult your dealer for environmentally friendly disposal of the TV set.
With the remote control, you can operate three Loewe units, this TV, a Loewe video recorder and a Loewe DVD player.
6
For your own safety
For your own safety and in order to avoid unnecessarily damaging your TV set, please read and observe the following safety instructions:
• This TV set is designed exclusively for receiving and reproducing audio and visual (AV) signals.
• It is designed for the home or office and may not be used in rooms with high humidity (e.g. bathroom, sauna) or a high concentration of dust (e.g. workshops). If the unit is used in the open air ensure that it is protected against moisture (rain, dripping or splashing water, or dew). Do not place containers filled with water, such as vases, on the TV set. High moisture and dust concentrations produce creep currents in the set which can lead to danger of electric shock or fire. The manufacturer’s warranty is only valid for use of the TV set in the specified permissible environment.
• This set may only be connected to a power supply with the voltage and frequency specified on the rating plate using the enclosed power cable. The wrong voltages can damage the set.
• If the set is moved from a cold environment to a warm room, condensation forms on all parts of the set. Moisture produces creep currents in the set which can cause a fire. In this case, you should leave the set for a reasonable time to acclimatize (when the condensation on the screen has evaporated) before switching it on.
• Like every piece of electronic equipment, your TV needs air for cooling. Obstructing the air supply to the set can cause fires. The air vents on the back of the TV set must always be kept free. Do not leave newspapers or cloths lying on the TV set. The air supply is also impaired when the TV set is placed on a blanket or a thick pile carpet. If the TV set is placed in a cabinet or on a
10 cm
5 cm
shelf, at least 5 cm clearance at the sides and at least 10 cm at the top must be left to allow air to circulate. Stand the TV set in a place where it is not exposed to direct sunlight or additional heating from radiators.
• Magnetic fields influence the picture quality of the TV set. Do not place loudspeakers or other magnetic sources immediately next to the TV set.
5 cm
• Avoid dropping metal objects, needles, paper clips, liquids, wax or similar into the air vents at the back of the set. This causes short circuiting of the set and could start a fire. If anything should get inside the set, switch it off immediately, pull out the plug and call the after-sales service to check it.
Do not place vases filled with water, lighted candles etc. on the top of the TV set.
7
For your own safety
• You should never attempt to remove the rear panel of the TV yourself. The set op­erates with high voltages which could be fatal. Leave repairs and servicing of your TV set to authorized TV technicians.
• Due to the picture tube, TV sets have their centre of gravity fairly near to the front. The TV set therefore has a tendency to tip for­ward relatively easily which could cause injury to persons. Only stand the TV set on a level, firm base. The set must stand on all feet. The TV should not overhang particularly when it is placed in a cabinet or on a shelf. If the TV is placed on a stand, make sure this is larger than the surface area of the base of the TV.
When using turntables and drawer shelves, make sure they have a sufficient load ca­pacity.
We recommend you to use only original parts, e.g. Loewe racks and stands.
If the TV set is placed on a console with castors, move the console carefully because the console and the TV could tip over. Consoles with castors may considerably reduce the stability of the sets placed on them, so only use consoles specially designed and approved for the TV. Never allow children to handle the TV set unsupervised.
Do not allow children to play close to the TV set, they could knock, push or pull it from the stand and injure someone.
• Do not place the TV anywhere where it may be exposed to vibrations. Vibrations can lead to overloading of materials.
• Do not leave the TV on unsupervised.
• Pull out the antenna and mains plugs during a thunderstorm. Surge voltages from lighting strikes can damage the set both through the antenna system and the mains. You should also pull out the antenna and mains plugs during long periods of ab­sence.
• The mains plug of the TV must be easily accessible so that it can be disconnected from the mains quickly at any time.
• Lay the power cable so that it cannot be damaged. The power cable may not be kinked or laid over sharp edges, and may not be walked over or exposed to chemi­cals; the latter applies for the entire TV set. A power cable with defective insu-
lation can lead to electric shocks and is a fire risk.
• When you pull out the mains plug, do not tug the cable but hold the housing of the plug. The cables in the mains plug could be damaged and cause a short circuit the next time it is plugged in.
8
Loading...
+ 18 hidden pages