Loctite SD10 Operation Manual

EQUIPMENT

Operation Manual

SD10 Digital Syringe Dispenser

Vacuum

psi

Pressure

psi

DISPENSE

TEACH

PROGRAM CYCLE TIMER MANUAL

SHOT

SET

EXIT

MODE

Loctite® SD10 Digital Syringe Dispenser

Part Number 1514629

TABLE OF CONTENTS

1 Please observe the following.......................................................................................... 3

1.1 Emphasized sections............................................................................................ 3

1.2 Items Supplied.......................................................................................................3

1.3 For your safety....................................................................................................... 4

1.4 Usage ......................................................................................................................4

2 Description - Typical System Set-Up ........................................................................... 5

2.1 Operating Elements .............................................................................................. 6

2.2 Theory of Operation.............................................................................................. 6

3 Technical Data................................................................................................................ 7

3.1 Energy Requirements........................................................................................... 7

3.1.1 Electrical .............................................................................................................. 7

3.1.2 Pneumatics.......................................................................................................... 7

3.2 Connections and Dimensions..............................................................................7

3.3 Other Data.............................................................................................................. 7

4 Installations .................................................................................................................... 8

4.1 Environmental Conditions.................................................................................... 8

4.2 Placement............................................................................................................... 8

5 Dispensing....................................................................................................................... 8

5.1 Filling the Syringe.................................................................................................. 8

5.2 Set Up...................................................................................................................... 9

5.2.1 Purging Air from the Syringe............................................................................ 9

5.2.2 Manual Mode...................................................................................................... 9

5.2.3 Programs........................................................................................................... 10

5.2.4 Timer mode....................................................................................................... 10

5.2.5 Cycle Mode....................................................................................................... 11

6 Cares and Maintenance............................................................................................... 12

6.1 Care....................................................................................................................... 12

6.2 Maintenance......................................................................................................... 12

7 Troubleshooting........................................................................................................... 13

8 Replacement Parts and Accessories........................................................................... 14

9 Warranty ...................................................................................................................... 14

1 Please observe the following

1.1 Emphasized sections

Danger!
Refers to safety regulations and required safety measures that protect the
equipment, operator, or other persons from injury.

Caution!
Emphasizes what must be done or avoided so that the unit or other property shall
not to be damaged.

Notice
Gives recommendations for better handling of the unit during operation or
adjustment, as well as for service activities.

The numbers printed in bold in the text (xx) refer to the corresponding position
numbers in the illustration in Section 2 & 2.1.

As a result of technical development, the illustrations and descriptions in this
instruction manual can deviate in detail from the actual unit delivered.

1.2 Items Supplied

1 SD10 Digital Syringe Dispenser
1 Foot switch
1 User manual
1 Power Supply
1 Syringe Barrel Stand
1 30/55 cc Syringe Air Line Adapter
1 Syringe Test Kit

1.3 For your safety

For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.

Damage to the power cord or the housing can result in live voltage.

 Check the power cord and the unit before each use.

If the power cord or the unit is damaged, do not operate!
Replace a damaged power cord with a new one.

 The unit may be opened and repaired only by an authorized Henkel service

representative.

Improper handling of Loctite® brand products may be hazardous to ones health!

 Observe general safety regulations for the handling of chemicals!
 Observe manufacturer’s instructions! Request a safety data sheet for the

product used!

 Always wear goggles, when operating with pressurized air!

1.4 Usage

The Loctite® SD10 Digital Syringe Dispenser (1514629) is a self-contained
dispenser system and suitable for the precise application of Loctite® brand
products at manual workstations such as in workshops, laboratories and industrial
installations. It is designed for a small volume applications of Loctite® brand
anaerobic, UV curing and gel cyanoacrylate adhesives as well as Loctite® brand
chipbonder® adhesives or soldering flux.

2 Description - Typical System Set-Up

Front Panel

SD10 Digital Syringe Dispenser

4

Vacuum

psi

Pressure

psi

5 3 2 1

Rear Panel

Power

Input

24VDC

0.5mA~

Power
Switch

MADE IN TAIWAN

9 8 7 6

Foot

Switch

XS-1

For Service, Spare Part s,& Repai rs

USA - (1) 860-571-5174
Germany - (49) 89-9268-0
Singapore - (65) 6266-0100
China - (86) 21-2891-8547

Visit: equipment.loctite .com

DISPENSE

TEACH

PROGRAM CYCLE TIMER MANUAL

24VDC Output

SD10 Digital Syring e Dispenser
IDH# 1514629

LabelP/N: 988341

SHOT

Air Input

Air Exhaust

SET

EXIT

MODE