Page 1
OPERATING GUIDE
ASSIGNED USE FUNCTIONALITY with LATCH
FUNCTION
M
LOCK
Lock Interface Overview
Key Slot
1 2 3
Numeric
Keypad
C Button Key Symbol Button
4 5 6
7 8 9
C 0
LED Indicator
Green
Integrated Pull Handle
Operate with an Assigned User Code
To Unlock
The latch will
retract emitting a
double beep and
single LED ash.
Manager Key (Black)
• Provides management access
• Provides external power
• Up to 25 keys may be registered
to each lock
Programming Key (Yellow)
• Registers Manager Key(s)
• Provides external power
• 1 Required Per Location
ADA User Key (Blue)
• ADA Compliant User Key
To Lock
After 5 seconds
the latch will
automatically
extend.
1) Press: = (assigned 4-digit user code) `
2) Open the door.
Note: After three consecutive incorrect user code entries, the lock will go into “Sleep State” for one minute or
until a registered Manager Key is used to operate the lock.
You may close the door at any point.
Operate with an Assigned ADA User Key
The ADA User Key is designed to be used by persons with disabilities and is 100% ADA Compliant.
To Unlock
The latch will
retract emitting a
double beep and
single LED ash.
1) Touch an assigned ADA User Key to key slot.
2) Open the door.
You may close the door at any point.
To Lock
After 5 seconds
the latch will
automatically
extend.
Page 2
To Operate with a Manager Key
To Unlock
The latch will
retract emitting a
double beep and
single LED ash.
1) Touch a registered Manager Key to key slot.
2) Open the door.
To Operate with a Programming Key
1) Press: = `
2) Touch the Programming Key to key slot.
3) Open the door.
To Lock
After 5 seconds
the latch will
automatically
extend.
You may close the door at any point.
To Unlock
The latch will
retract emitting a
double beep and
single LED ash.
You may close the door at any point.
To Lock
After 5 seconds
the latch will
automatically
extend.
For additional product information including instructional videos please visit us online at: www.lockup.com
Via email: support@lockup.com
Phone: (707) 766-6000
Fax: (707) 766-6226
LockUp ®
9 Willowbrook Court
Petaluma, CA 94954
1/31/13
security people
secu rity simplif ied
Digilock Lockup Celáre
inc
™
Numeris
Page 3
PROGRAMMING GUIDE
ASSIGNED USE FUNCTIONALITY with LATCH
FUNCTION
M
LOCK
Lock Interface Overview
Key Slot
1 2 3
Numeric
Keypad
C Button Key Symbol Button
NOTE: Default user code is 1 2 3 4 once initialized.
4 5 6
7 8 9
C 0
LED Indicator
Green
Integrated Pull Handle
Assign or Change the User Code using Existing User Code
1
The LED will turn solid.
2
Manager Key (Black)
• Provides management access
• Provides external power
• Up to 25 keys can be registered per lock
Programming Key (Yellow)
• Registers Manager Key(s)
• Provides external power
• 1 Required Per Location
ADA User Key (Blue)
• 100% ADA Compliant
• Designed for persons with disabilities
Lock will emit a two
tone beep and the LED
will turn off.
a) Press: = ` (the LED will turn solid)
b) Enter: [existing 4-digit user code]
a) Enter: [new 4-digit user code] `
b) Repeat: [enter the same 4-digit user code] `
Assign or Change the User Code using Manager Key
1
a) Press: = `
b) Touch a registered Manager Key to key slot.
Assign an ADA User Key
1
The LED will turn solid.
Note: The lock will accept only one ADA User Key at a time.
The LED will turn solid.
2
a) Enter: [new 4-digit user code] `
b) Repeat: [enter the same 4-digit user code] `
2
Lock will emit a two
tone beep and the LED
will turn off.
Lock will emit a
two tone beep
and the LED will
turn off.
a) Press: = `
b) Touch a registered Manager Key to key slot.
Touch an ADA User Key to key slot.
Page 4
Register Manager Key(s)
1
Press: = ` 55 `
LED will ash.
3
Touch each Manager Key to the lock one at a time.
(Up to 25 Manager Keys)
A single beep will be heard per key indicating acceptance.
2
Touch the Programming Key to key slot.
The LED will turn solid.
4
Touch the Programming Key to key slot until a two tone
beep is heard and the LED turns off.
Express Registration
Once you program one lock with Manager Key(s), you can transfer it to all the other locks with one touch.
1
Press: = ` 66 `
LED will ash.
3
Touch the Programming Key to the key slot of all locks to be
programmed.
At each lock, a two tone beep will be heard & the LED will ash
once to indicate successful programming.
Go to the lock that has
been programmed with
Manager Key(s).
2
Touch the Programming Key to key slot.
A two tone beep will be heard & the LED will turn off.
4
You must operate the lock with a Programming Key
once to end or exit out of the Express Registration
process.
For additional product information including instructional videos please visit us online at: www.lockup.com
Via email: support@lockup.com
Phone: (707) 766-6000
Fax: (707) 766-6226
LockUp ®
9 Willowbrook Court
Petaluma, CA 94954
1/31/13
security people
secu rity simplif ied
Digilock Lockup Celáre
inc
™
Numeris
Loading...