Lochinvar SB009 User Manual

Space Saver Boosters are compact, 100% efficient and
provide the most economical means for raising rinse water temperatures to the required 180°F for sanitizing.
Minimal storage means instantaneous hot water...no
temperature lag, no lost time for the heating of storage water, no offcycle operation to overcome standby losses.
Pilot switch allows the unit to be energized only when
dishwasher is in use for maximum economy of operation.
valuable floor space. Boosters may be under-counter mounted with slide out hangers or free-standing on 6" adjustable legs provided with the unit.
Space Saver Boosters are available with kW inputs up to
58 kW meeting the requirements of even the largest commercial dishwashers.
Heavy gauge cement lined, steel tank certified for 150 psi
working pressure; 300 psi test pressure construction.
Copper sheathed, low watt density elements.
Mounting plate for “slide out” under counter installation
available upon request.
Pilot switch with indicator light and high limit control.
Built-in low water cut-off.
Attractive stainless steel jacket and front control panel.
Temperature and pressure gauge.
ASME temperature and pressure relief valve.
Full blanket insulation.
Pressure reducing valve with bypass check.
Hinged access door and electric controls.
120 volt control circuit.
3 year limited warranty.
Slide out mounting bracket for under counter installation.
Stainless steel legs.
3/4" shock absorber. (water hammer arrestor)
Optional Equipment
Space Saver Electric Boosters
Outstanding Features
Commercial Electric Booster Water Heaters 180°F Water for Commercial Dishwashing Applications
Space Saver Booster Installs Either of Two Ways
COUNTER MOUNTED
FREE STANDING
4/08–Printed in U.S.A.
SB B 018
M
ODEL
VO LTAG
E
KW
Lochinvar Corporation • 300 Maddox Simpson Pkwy • Lebanon, TN 37090 • 615-889-8900 / Fax: 615-547-1000
www.Lochinvar.com
Sizing Guide
Voltage Schedule
Dimensions and Specifications
Electrical Connection From either side (6-18), left side (24-58) or from bottom (all models)
SSB-07 (Revised SSB-07 7/06)
FOR EASE IN ORDERING
BY MODEL NUMBER
This heater is a
Space Saver Booster
with 240 volts, 3 phase
and 18 kilowatts
.
Model Recovery (GPH @) Btu/hr Weight
Number kW 40°F 70°F Input A B C D E F
SB*006 6 62 35 20,478 13-3/4” 20-3/4” 13” 3-1/2” 11-1/2” 6-1/2” 118 SB*009 9 93 53 30,717 13-3/4” 20-3/4” 13” 3-1/2” 11-1/2” 6-1/2” 118 SB*012 12 124 71 40,956 13-3/4” 20-3/4” 13” 3-1/2” 11-1/2 ” 6-1/2” 118 SB*015 15 155 89 51,195 13-3/4” 20-3/4” 13” 3-1/2” 11-1/2 ” 6-1/2” 118 SB*018 18 186 106 61,434 13-3/4” 20-3/4 ” 13” 3-1/2” 11-1/2” 6-1/2” 118 SB*024 24 248 142 81,912 12” 24” 18” 2” 10” 8” 158 SB*030 30 310 177 102,390 12” 24” 18” 2” 10” 8” 158 SB*036 36 372 213 122,868 12” 24” 18” 2” 10” 8” 158 SB*045 45 465 266 153,585 12” 24” 18” 2” 10” 8” 158 SB*054 54 558 316 184,302 12” 24” 18” 2” 10” 8” 158 SB*058 58 600 343 198,128 12” 24” 18” 2” 10” 8” 158
Model Single Phase Three Phase
No. kW 208V 240V 208V 240V 480V
SB*006 6 29 25 25 22 11 SB*009 9 43 38 38 33 16 SB*012 12 58 50 33 29 14 SB*015 15 72 63 42 36 18 SB*018 18 83 72 48 42 21 SB*024 24 116 100 67 58 29 SB*030 30 144 125 83 72 36 SB*036 36 173 150 100 87 43 SB*045 45 216 188 125 109 54 SB*054 54 259 229 150 130 65 SB*058 58 279 242 161 141 71
Amperage Draw
A – 240V 1ø B – 240V 3ø J – 208V 1ø K – 208V 3ø X – 480V 3ø T
208V 1øor 3
ø
P– 240V 1øor 3
ø
Booster Model No. Booster Model No.
Dishwashing Machine Classification 40° F Rise 70° F Rise
16” x 16” Single Tank (69 GPH) Stationary Rack, Door SB*009 SB*012 18” x 18” Single Tank (87 GPH) Stationary Rack, Door SB*009 SB*015 20” x 20” Single Tank (104 GPH) Stationary Rack, Door SB*012 SB*018 Multiple Tank (277 GPH) Conveyor, Dishes inclined SB*030 SB*054 Multiple Tank (347 GPH) Conveyor, Dishes flat SB*036 (2) SB*030 Single Tank (416 GPH) Conveyor SB*045 (2) SB*036
Notes: * Indicates voltage. 6 and 9 kW models wired for 1ø or 3ø operation in 208 or 240 volt. Six (6) gallon capacity for all models.
Outlets and inlets are 8”center-to-center. Water connections are all 3/4”NPT.
BACK
C
D
E
OUTLET
RELIEF VALV E
INLET
A
B
SIDE FRONT
F
*
Indicates Voltage
Loading...