Lochinvar MDN030G User Manual

Manufactured Home Residential Gas
Sealed Combustion for Manufactured Homes
The Manufactured Home Residential Gas Water Heater draws all combustion air from outside through the air intake. All by-products of combustion are vented directly outside, omitting the need for a draft diverter.
Standard Features
Low NOx Burner – This whisper quiet, 360 burner incorporates
aluminized steel construction into its die-formed design. The larger burner diameter transfers more heat, while providing clean and efficient combustion. Satisfies local codes and emission standards in the U.S. Eliminates the need for a manual adjust air shutter. Convenient pilot location simplifies service.
Non-CFC Foam Insulation - Improved formulation provides uniform
tank coverage with a thick blanket of insulating foam. This non-CFC polyurethane closed cell foam minimizes standby losses and maximizes heat retention.
Natural Gas to LP Gas Conversion Kit – Conversion orifice kit for
natural gas to LP gas supplied with unit.
Adjustable Thermostat – Automatic temperature selection at your
fingertips. This accurate control provides an easy way to reset water temperature for best economy. Automatic over-heat safety device is standard. Convertible control for use with LP or Natural gas.
Water Heater
Glass-Lined Steel Tank – Fused to the tank at 1600F, the durable
glass lining assures lasting protection against rust and corrosion while providing clean, clear hot water. 300 psi test pressure provides 150 psi working pressure.
Magnesium Tank Saver Anode – A large diameter anode rod inhibits
corrosion of tank interior for long, trouble-free service.
Factory Installed Dielectric Nipples – These nipples protect the
tank from corrosive action between dissimilar metals, while reducing installed cost.
Heat Traps – Factory installed, minimizes heat loss through piping.
Temperature & Pressure Relief Valve
Brass Drain Valve
6 Year Limited Warranty*
(See warranty for details)
10 Year Extended Warranty Available
(In residential applications)
* 3 year limited warranty on tank and 1 year limited warranty on Parts
when installed in commercial applications
All models meet or exceed the NAECA and ASHRAE Energy Efficiency Standards
Dimensions and Specifications
Manufactured Homes
Direct Vent / Closed Combustion
Design evaluated in accordance with the H.U.D. Manufactured Home Construction and SafetyStandard, Title 24 CFR, Part
3280.707 (d)(2) for energy efficiency.
FOR EASE IN ORDERING
BY MODEL NUMBER
M D N 030 G
Manufactured
Home
This is a manufactured
home, direct vent, natural
gas 30 gallon water heater.
Direct Vent
Natural Gas
NAECA Compliant
Gallon Capacity
Model Capacity Input GPH @ 1st Hour Energy Vent Ship. Number (Gallons) Btu/Hr 90°F Rise (Gallons) Factor A B D E F Size Wt
MDN030G 30 30,000 31 48 0.61 57-1/2” 16” 50” 22-1/2” 13-3/4” 3” 106 MDN040G 40 30,000 31 51 0.59 58” 18” 50” 22-1/2” 13-3/4” 3” 126
Notes: Field Convertible from Natural Gas to LP gas. Performance data is based on manufacturer test results. All gas connections are 1/2”. All water connections are 3/4” NPT.
Optional Equipment
Roof Jack Kit – For UL approval this water heater requires the field installation of a Roof Jack Kit, which includes: Roof jack, adjustable air intake, and installation hardware. This kit is ordered separately and must be installed according to instructions. The roof jack is shipped with the heater in a separate box.
Specify roof jack kit size when ordering.
Certified for Potable Water and Space Heating Applications
This water heater is suitable for water heating and space heating. Toxic chemicals, such as those used for boiler water treatment shall NEVER be introduced into this system. This water heater may NEVER be connected to any existing heating system or components previously used with non-potable water heating appliances.
Kit Number Dimensions
DRH1070 12” DRH1071 18”– 32” DRH1072 32”– 60” DRH1173 48”– 95”
Roof Jack Kits
Lochinvar Corporation • 300 Maddox Simpson Pkwy • Lebanon, TN 37090 • 615-889-8900 / Fax: 615-547-1000
www.Lochinvar.com
MFH-05 (Replaces MFH-04 1/09)
PDP-5M-4/11-Printed in U.S.A.
Loading...