CUSTOM HI-POWER
®
SQUARE WATER
HEATER Submittal Sheet
CHPS-Sub-10a
SQUARE JACKETED CUSTOM HI-POWER® ELECTRIC WATER HEATERS
JOB NAME ______________________________________________________________________
LOCATION ______________________________________________________________________
ARCH./ENGR.____________________________________________________________________
WHOLESALER __________________________________________________________________
MECH. CONTRACTOR ___________________________________________________________
MODEL NO. _____________________________________________________________________
RECOVERY RATE IN GPH_______________________________________@________°F RISE
GALLON CAPACITY_____________________________________________________________
VOLTAGE/PHASE________________________________________________________________
KW_____________________________________________________________________________
NOTES
Standard Features
• Glass Lined Steel Tank
• Incoloy Heating Elements
• Internal Fusing (above 120 amps)
• Enamel Finished Galvanized Steel Jacket
• Magnesium Tank Saver Anodes
• Immersion Thermostat
• Manual Reset High Limit
• Full Length Hinged Doors with Key Lock
• Terminal Block Connections
• ASME Temperature and Pres sure Relief Valve
• Channel Iron Skid Base
• Approved for 180°F Temperature Operation
• ASME Construction and Na tion al Board Listed
• All models meet or exceed ASHRAE
energy efficiency standards
• 125 psi Working Pressure
• Handhole Cleanout
• UL Listed
• Safety Drain Pan (Square Models)
• 3 Year Limited Tank Warranty
(see warranty for details)
Optional Equipment
Place an X in the box by all options that apply
Alarm Bell
ASME 150 psi Construction
ASME 160 psi Construction
Manway (250 Gallon and Larger only)
Lifting Lugs (pair)
Low Water Cut-Off
High Water Pressure Switch
Low Water Pressure Switch
Pilot Lights and Switch for each Contactor
Safety Door Interlock
Temperature and Pressure Gauge
Time Clock (7 Day)
Time Clock (24 Hour)
BMS Enable/Disable Contacts
Shunt Trip Disconnect
Electronic Step Controller
1-4 Step
5-8 Step
9-12 Step
Custom Hi-Power® Square Electric Water Heater Dimensions & Specifications
VERTICAL MODELS
*An oversized control panel may be required on models with inputs above 72 kW. An oversized
control panel may increase the width and depth of the square jacket by up to 2”.
HORIZONTAL MODELS
Max. Gal. Water Shipping
Model KW Cap. A B C D Conn. Weight
Inlet Outlet
Vertical Square
HV*kW-1250 900 1,250 132-1/2” 64-1/2” 64-1/2” 23-1/4” 3” 3” 3,560
HV*kW-1500 900 1,500 128-1/2” 70-1/2” 70-1/2” 25-1/4” 3” 3” 4,120
HV*kW-2000 900 2,000 140-1/2” 76-1/2” 76-1/2” 27-1/4” 3” 3” 4,350
HV*kW-2500 900 2,500 146-1/2” 82-1/2” 82-1/2” 29” 3” 3” 5,750
Horizontal Square
HH*kW-150 135 150 37” 68-1/2” 34-1/4” 12” 2” 2” 1,180
HH*kW-200 180 200 37” 78” 34-1/4” 12” 2” 2” 1,370
HH*kW-250 225 250 39” 90-1/4” 36-1/4” 13” 2” 2” 1,450
HH*kW-300 270 300 45” 78-1/4” 42-1/4” 14-3/4” 2” 2” 1,530
HH*kW-400 360 400 52” 78-1/4” 48-1/4” 16” 2” 2” 1,750
HH*kW-500 450 500 52” 90-3/4” 48-1/4” 16” 2” 2” 1,860
HH*kW-600 540 600 58” 90-3/4” 54-1/4” 13-1/2” 2-1/2” 2” 2,340
HH*kW-800 720 750 58” 102-1/4” 54-1/4” 13-1/2” 2-1/2” 2” 2,850
HH*kW-1000 900 950 58” 126-1/4” 54-1/4” 13-1/2” 2-1/2” 2” 3,040
HH*kW-1250 900 1,250 64” 130-1/4” 60-1/4” 15” 3” 3” 3,750
HH*kW-1500 900 1,500 70” 126-1/4” 66-1/4” 16” 3” 3” 4,340
HH*kW-2000 900 2,000 76” 137-1/4” 72-1/4” 17-1/2” 3” 3” 4,580
HH*kW-2500 900 2,500 82” 144-1/4” 78-1/4” 16-1/2” 3” 3” 6,060
NOTES: On models 250 gallons and up dimensions include channel iron skids (not shown).
Additional tank capacities and inputs are available. Consult factory.
VOLTAGE SCHEDULE
J—208V 1ø
K—208V 3ø
A—240V 1ø
B—240V 3ø
W—277V 1ø
Y—380V 3ø
Q—400V 3ø
Z—415V 3ø
X—480V 3ø
N—600V 3ø
= Voltage Schedule
*
KW = KW Output
HLW
Lochinvar, LLC • 300 Maddox Simpson Pkwy • Lebanon, TN 37090 • 615-889-8900 / Fax: 615-547-1000
www.Lochinvar.com
5/12—Printed in U.S.A.