Lochinvar CLR160-075-DF9 User Manual
Dependable, Tank Type Water Heaters for
Commercial and Industrial Applications
Charger
and
Super Charger
Commercial Gas
Water Heaters
Charger
• Multi-flue design increases efficiency
and heat transfer.
• Durable fused glass lining prolongs tank life.
• Up to two inches of Polyurethane foam
insulation maximizes heat retention and
lowers standby heat loss.
• Up to four magnesium tank saver anodes inhibit
corrosion and prolong tank life.
• Heavy steel jacket with baked enamel finish.
• 300 psi tested tank with 150 psi approved
working pressures.
• Automatic Reset High-Limit provides protection
from overheat.
• 80% Thermal Efficiency
• Low silhouette drafthood.
• Spark ignition standard on models 125,000 Btu/hr
and larger.
• Standing pilot millivolt system on
65,000 - 85,000 Btu/hr models.
• Hand hole cleanout permits easy
access for cleaning.
• Approved for 180°F operation.
• Slide out burner tray for convenient servicing
on models 125,000 Btu/hr and larger.
• Combustible floor approval.
• Automatic Flue damper on all
models above 125,000 Btu/hr.
• 115 VAC is required on all models
above 125,000 Btu/hr.
• 3 year limited warranty.
Outstanding Features:
Super Charger
Outstanding Features:
• Glass-lined tank.
• Multiple magnesium tank saver anodes.
• Polyurethane foam insulation.
• Heavy steel jacket with baked enamel finish.
• Adjustable thermostat.
• Automatic Reset High-Limit.
• Standard or ASME tank construction.
• 300 psi test pressure for 150 psi working pressure.
• Approved for 180ºF operation.
• 80% Thermal Efficiency
• Efficient multi-flue design.
• Hand hole cleanout.
• Simple 115 VAC circuitry.
• 4 second main gas shutdown.
• 3 year limited warranty.
•
Temperature and Pressure Gauge
•
NSF Construction.
Optional Equipment:
•
Temperature and Pressure Gauge
•
NSF Construction.
Optional Equipment:
The Lochinvar Charger gas fired water heaters are designed to provide high efficiency, low stand-by loss
and years of trouble-free service. All models meet the latest edition of ASHRAE Energy Efficiency
Standards. Chargers are ideally suited for apartments, schools, food service and many other commercial
and industrial requirements for hot water. They are built to ensure easy installation and maintenance.
The Lochinvar Super Charger incorporates all of the high efficiency performance and design benefits
of the Charger with the addition of an integrated fan induced combustion system. The result is
optimum combustion with fan-assisted movement of the flue products over the multi-flue tank surface
for improved heat transfer from the flue gases to the water. The Super Charger fan induced system
allows installation with conventional negative draft venting using standard type “B” vent material.
4/09-Printed in U.S.A.
Lochinvar Corporation • 300 Maddox Simpson Pkwy • Lebanon, TN 37090 • 615-889-8900 / Fax: 615-547-1000
www.Lochinvar.com
CGR-16
(Replaces CGR-15 2/08)
65,000 - 85,000 Btu/hr
125,000 - 500,000 Btu/hr
Super Charger
Water Connections
T = Top Connections
F = Front Connections
B = Back Connections
Low NOx models are
available on inputs
under 400,000 Btu/Hr.
Add -SC to model number.
Dimensions and Specifications:
Charger Dimensions & Specifications
Super Charger Dimensions & Specifications
LP Inputs
Model Tank Btu/hr Gallon GPH @ A B D E F G Vent Gas Water Nipple Shipping
Number Const. Input Cap. 100°F Rise Size Conn Conn Spread Weight
LNR065-050* STD 65,000 48 60 56-1/4” 22” 59-1/4” – – 13” 4” 1/2” 3/4” T 11” 160
CNR076-075* STD 76,000 75 74 59” 26” 62-1/4” – – 15” 4” 1/2” 1” T 11” 247
CNR085-100* STD 85,000 100 82 65-1/4” 28-1/4” 68-3/4” – – 15-1/2” 4” 1/2” 1-1/4” T 16 ” 420
CNR125-075-DF9* STD 125,000 75 121 65” 28-1/4” 72-1/4” 54-1/2” 34” 4-3/4” 5” 3/4” 1-1/2” T/F 14-1/2” 520
CNR155-035-DF9* STD 155,000 38 150 43” 28-1/4” 51” 34-3/2” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 438
CNR160-075-DF9*♦ STD 160,000 75 155 65” 28-1/4” 72-1/4” 54-1/2” 34” 4-3/4” 6” 3/4” 1-1/2” T/F 14-1/2” 520
CNR180-080-DF9 STD 180,000 80 175 64-1/2” 28-1/4” 72-1/2” 56” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 540
CNR200-080-DF9♦ STD 199,999 80 194 64-1/2” 28-1/4” 72-1/2” 56” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 540
CNR199-100-DF9 STD 199,999 100 194 65” 30-1/4” 75” 56-1/2” 23-1/2” 4-1/2” 6” 3/4” 1-1/2” T/F, 2” B 23” 725
CNR200-100-DF9 STD 199,999 98 194 75-1/2” 28-1/4” 83-1/2” 67” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 610
CNR250-100-DF9♦ STD 250,000 98 242 75-1/2” 28-1/4” 83-1/2” 67” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 610
CNR300-075-DF9 STD 300,000 75 291 64-1/2” 28-1/4” 73” 54-1/4” 29” 10-1/2” 7” 3/4” 1-1/2” F 19” 590
CNR370-065-DF9 STD 370,000 65 359 64-1/2” 28-1/4” 73-1/2” 54-1/4” 29” 10-1/2” 8” 1”, 3/4”LP 1-1/2” F 19” 665
CNR400-080-DF9♦ STD 399,999 80 388 60” 30-1/4” 71-1/2” 51-1/2” 23-1/2” 10-1/2” 8” 1”, 3/4”LP 1-1/2” F, 2” B 23” 800
CNR500-080-DF9♦ STD 505,000 80 496 60” 30-1/4” 69-1/2” 51-1/2” 23-1/2” 10-1/2” 10” 1”, 3/4”LP 1-1/2” F, 2” B 23” 800
CNA251-100-DF9♦ ASME 250,000 98 242 75-1/2” 28-1/4” 83-1/2” 67” 19-1/2” 4-3/4” 6” 3/4” 1-1/2” T/F 19” 690
CNA301-075-DF9 ASME 300,000 75 291 64-1/2” 28-1/4” 73” 54-1/4” 29” 10-1/2” 7” 3/4” 1-1/2” F 19” 645
CNA371-065-DF9 ASME 370,000 65 359 64-1/2” 28-1/4” 73-1/2” 54-1/4” 29” 10-1/2” 8” 1”, 3/4”LP 1-1/2” F 19” 720
CNA401-080-DF9♦ ASME 399,999 80 388 60” 30-1/4” 71-1/2” 51-1/2” 23-1/2” 10-1/2” 8” 1”, 3/4”LP 1-1/2” F, 2” B 23” 835
CNA501-080-DF9
♦ ASME 505,000 80 496 60” 30-1/4” 69-1/2” 51-1/2” 23-1/2” 10-1/2” 10” 1”, 3/4”LP 1-1/2” F, 2” B 23” 835
♦Indicates
LP Inputs
* These models have one aquastat.
Model Tank Btu/hr Gallon GPH @ A B D E F G Vent Gas Water Nipple Shipping
Number Const. Input Cap. 100°F Rise Size Conn Conn Spread Weight
CNR625-065-DF9 STD 625,000 65 606 69-1/2” 28-1/4” 69” 54-1/4” 29” 10-1/2” 8” 1”, 3/4” LP 1-1/2” F – 720
CNR725-080-DF9 STD 725,000 80 703 79-3/4” 28-1/4” 79-1/4” 64-1/4” 29” 10-1/2” 8” 1”, 3/4” LP 1-1/2” F – 800
CNA626-065-DF9 ASME 625,000 65 606 69-1/2” 28-1/4” 69” 54-1/4” 29” 10-1/2” 8” 1”, 3/4” LP 1-1/2” F – 775
CNA726-080-DF9 ASME 725,000 80 703 79-3/4” 28-1/4” 79-1/4” 64-1/4” 29” 10-1/2” 8” 1”, 3/4” LP 1-1/2” F – 880
Notes: Change “N” to “L” for LP gas models. Performance data is based on manufacturer test results.
FOR EASE IN ORDERING
BY MODEL NUMBER
C N R 125 075 D F9
This is a natural gas Charger water heater.
It has standard construction, 125 Btu/hr,
and 75 gallon storage capacity. It comes
with a flue damper and spark ignition.
Charger
Gallon Capacity
Flue Damper
Spark Ignition
Natural Gas
Construction
Btu/hr Input
Model Btu/hr GPH @
Number Input 100°F Rise
CLR160-075-DF9 155,000 147
CLR200-080-DF9 190,000 184
CLR250-100-DF9 235,000 228
CLR400-080-DF9 375,000 364
Model Btu/hr GPH @
Number Input 100°F
CLR500-080-DF9 475,000 461
CLA251-100-DF9 235,000 228
CLA401-080-DF9 375,000 364
CLA501-080-DF9 475,000 461
Loading...