L.L.Bean ROUND ADIRONDACK TABLE Assembly Instructions Manual
ROUND ADIRONDACK TABLE
Thank y ou for purchasing this L.L.Bea n Home Round
Adirondack Table. Assem bly of this product requires a
7/16” wre nch or an adjustable wrench, and Phillips
screwdriver. We have found it helpful to have a second
person assist with assembly.
930 0PH48090130
STEP 1
Read through these instructions thoroughly
b
efore beginning assembl
y. We have
f
ound this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from
packing material
. Wooden pieces should
b
e placed on a non-abrasive surface (like
the carton or carpet) to prevent damage to
the finish.
STEP 3
Identify all parts using dia gra m at r ight
STEP 4
Identify and count hardware using diagram
a
t right.
Assembly of this product requires an
adjustable wrench and Phillips
screwdriver.
We have found it hel pful to
h
ave a second person present in at least
one step of the a ssembly.
STEP 5
Locate two leg sections (B) with factoryinstalled nut countersunk into them.
Attach outer leg (C) to inner leg (B) by
placing outer leg (C) on top o f inner leg
(B) and inserting 1 ½” machine screw with
washer, through center hole i n outer leg
(C) and into the factory-i ns t alled locknut
in the center of inner leg (B). Do not
tighten fully at this time. This will create
a “scissor” leg assembl y.
Repeat for the other leg.
Loading...