L.L.Bean Mission Two Drawer Desk Assembly Instructions Manual

Mission Two Drawer Desk

Thank you for purchasing our Mission Two Drawer Desk. Assembly of this product
requires a Phillips screwdriver and a hammer. We have found it helpful to have a second
person present in at least one step of the assembly.

0GVJ9081008

Read through these instructions thoroughly. We
have found this to be of great value when first
assembling this product.

Remove all parts and hardware from packing
material. Place wooden parts on non-abrasive
surface (like carpet or carton) to prevent damage
to finish.

Assembly of this product requires a Phillips
screwdriver and a hammer.

Identify and count hardware using diagram at
right.

Identify all parts using diagram at right.

1 Top (A)
1 Right Side Assembly (B)
1 Left Side Assembly (E)
1 Bottom Stretcher (C)
2 Drawers (D)

STEP 1

Lay Top (A) on non-abrasive surface (like
cardboard or carpet) to prevent damage to finish.

STEP 2

Attach right Side Assembly (B) to Top (A) using
two 1-1/4” screws inserting them through the
inside of the Top (A) frame then into the
predrilled holes in the Side Assembly (B). Please
note position of holes in Side Assembly (B).
They should be to the back of the unit. Do not
tighten.

STEP 3

Repeat Step 2 to attach left Side Assembly (E).

1 of 3 0GVJ9081008