44
44
25
INSTALLATION INSTRUCTIONS
44
44
25
+DARC336700D1
rev. 00 18/07/2018
Made in Italy
ARC336700D1
Power supply units and control gear
ARC336700D1
WARNING!!!
Please read the following instructions carefully.
IMPORTANT:
• Although LED runs on a very low voltage, always cut o the power supply before installing the LED light or subjecting it to
maintenance.
• Unauthorised alterations or tampering of the product will invalidate all the conditions of guarantee.
• This xture must be istalled by a qualicate electrician.
• Install the device in a well-ventilated place.
• The device generates heat when in function.
• L&L Luce&Light is not resposable if its xtures are not installed in according to local safety standards.
• Data contained in this document may be changed at any moment without prior notice and do not place L&L Luce&Light under
any implicit or explicit obligation.
The 3-channel sequence, used to dynamically change colour in RGB lamps.
Rated voltage
12 — 48 Vdc
Output current
700 mA
L&L Luce&Light / Via della Tecnica, 46 / 36031 Povolaro di Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04
E lucelight@lucelight.it / www.lucelight.it
1/2
INSTALLATION INSTRUCTIONS
Max 6 Spot RGB
3x2W
(Vin = 24 Vdc)
USE N.O. PUSH BUTTON
MAXIMUM DISTANCE 10 m
USE SHIELDED CABLE
Max 12 Spot RGB
3x2W
(Vin = 48 Vdc)
ARC336700D1
NO PUSH BUTTON
12 ÷ 48 Vdc
PP
V
ARC336700D1
in
RED +
ROSSO +
ROUGE +
ROT +
ROJO +
VERMELHO +
GREEN +
VERDE +
VERT +
GRÜN +
VERDE +
VERDE +
BLUE +
BLU +
BLEU +
BLAU +
AZUL +
AZUL +
RED +
ROSSO +
ROUGE +
ROT +
ROJO +
VERMELHO +
CONNECT IN SERIES
WHITE -
BIANCO -
BLANC -
WEIß -
BLANCO BRANCO -
GREY -
GRIGIO -
GRIS -
GRAU -
GRIS CINZENTO
BROWN -
MARRONE -
MARRON -
BRAUN -
MARRÓN CASTANHO -
GREEN +
VERDE +
VERT +
-
GRÜN +
VERDE +
VERDE +
RED +
ROSSO +
ROUGE +
ROT +
ROJO +
VERMELHO +
GREEN +
VERDE +
VERT +
GRÜN +
VERDE +
VERDE +
BLUE +
BLU +
BLEU +
BLAU +
AZUL +
AZUL +
BLUE +
BLU +
BLEU +
BLAU +
AZUL +
AZUL +
WHITE -
BIANCO -
BLANC -
WEIß -
BLANCO BRANCO -
GREY -
GRIGIO -
GRIS -
GRAU -
GRIS CINZENTO
BROWN -
MARRONE -
MARRON -
BRAUN -
MARRÓN CASTANHO -
Out 700 mA
RGB
-
CONNECT THE SPOTLIGHTS AND THE PUSH BUTTONS BEFORE POWERING THE CONTROL DEVICE
USING WITH N.O. PUSH BUTTON
PUSH
SHORT PRESS: switches the spotlights on/o.
PUSH
LONG PRESS (>3 SEC): locks the sequence on the colour present at that time.
PUSH
LONG PRESS (>3 SEC): restarts the sequence.
CYCLE TIME SELECTION (WITH DEVICE SWITCHED OFF)
PUSH
LONG PRESS (WHEN SWITCHED OFF): choice of 4 levels of ashing LEDs, which stand for the cycle times:
• fast ashing: 6 sec cycle
• fast ashing 1: 30 sec cycle
• fast ashing 2: 6 min cycle
• slow ashing: 30 min cycle
L&L Luce&Light / Via della Tecnica, 46 / 36031 Povolaro di Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04
E lucelight@lucelight.it / www.lucelight.it
2/2
Loading...