+
-
1. SIM Card Set-Up
* Your LiveTrek tracker has been pre-fitted with a SIM card from ALDI that operates
on the Telstra mobile network.
* The APN to allow your tracker to send location data to your smartphone has also
already been set up for you.
* The SIM card has $5 prepaid credit on it that will generally last at least 3-4 months
but the SIM card needs to be activated for the tracker to work. Please follow the
instructions on the attached sheet to activate your SIM card.
* You can add credit to your SIM card at any time by simply logging on to your new
ALDI account. Even with the most frequent location updates $15 credit should
last a full year!
* If you prefer to use an alternative SIM card such as Telstra mobile, Vodafone or Optus
you can replace the pre-fitted SIM card with the SIM card of your choice. In these
cases you will have to set up a new APN specific to the SIM card brand you are using.
Go to the website www.trackall.com.au for more detailed instructions on this.
2. Installation
* Connect RED wire to a constant power supply and BLACK wire to Ground. The
tracker can be connected to power supplies from 6V to 24V.
* Do NOT mount the tracker directly under metal. Try to mount under plastic, if
possible e.g. under the dash near the windscreen. You can simply test the position
and orientation of the tracker to get the best results by checking location accuracy on
your iCAR phone app.
* We recommend that you use a qualified auto electrician for warranty protection
3. LED Indicator Lights
4. Important Information
* A GPS signal is required for the tracker to find its location.
* Tracker may not work when under cover, shelter or indoors due to poor GPS signal. GPS signal is best when
outdoors in clear view of the sky.
* Tracker will not work without adequate GSM (mobile phone network) signal. The mobile phone network is
required to transmit location data to your phone app.
* Do NOT mount tracker deep inside the vehicle under metal etc.
* Poor installation will void warranty. Use a qualified auto electrician.
* Ensure you always have sufficient credit for data on the SIM card by logging in to your SIM card account.
5. Load the free iCAR phone app
For Android, download iCAR – Advanced GPS tracker For iOS (iPhone), download iCAR from the App Store
from the Google Play Store
Basic Set-up and User Guide (Model:LT-201)
SIM card
Location Point
Info:
6. Using the iCAR app
Log in:
Add New Tracker:
Click 3 line symbol in top left of
screen to get to this screen
No GSM
Add New Tracker:
Find IMEI no. on tracker or box and
type in or scan barcode
Current Location:
Find IMEI no. on tracker or box and
type in or scan barcode
Urgent
Mode
Park
Mode
Tap for Device
Information screen
Add New Tracker:
Click 3 line symbol in top left of
screen to get to this screen
Device Information
Screen:
Remove Tracker
Alerts
Geofence:
Enter IMEI code
and press OK. Then
insert 12345678 as
password in set-up
Enable to share & enter
4 digit security code
Location History:
Tap to see information
of each location point
Speed
No. of satellites
& signal strength
Distance
from start
NOTE:
• After entering the IMEI code it will ask you for a security code... type in 12345678 to complete adding the tracker.
• To share the tracker, Enable & enter a 4 digit security code. The sharer then goes to "Add Tracker" on their app,
types in your tracker's IMEI code and then enters that same 4 digit security code. The sharer can only see Current
Location and cannot change any settings.
• To vary the Map Display Mode go to “APP Settings” on Current Location screen - "Hybrid” is preferred.
• To change the type of Notification and to enable Continuous Alarm go to “APP Settings”.
About GPS accuracy:
Global Positioning System is used as a navigation tool. It is normal to have random accuracy fluctuations due to a
number of factors. When the tracker is under shelter or in hilly terrain areas, the accuracy may vary from 2 metres
to 50+ metres.
APP Settings
Pick which Geofence to Edit or Delete. Tap the
edit button in top right of screen to add a
Geofence. Long press and centre geofence and
set distance by dragging slide. Tap NEXT and
select settings and then tap SAVE SETTINGS.
Loading...