Livestrong LS13.0E-02 User Manual

LS13.0E-02 Service Manual

1

TABLE OF CONTENTS

CHAPTER 1: SERIAL NUMBER LOCATION

1.1 Serial Number Location………………………………………………….….……………………………….……3

CHAPTER 2: ENGINEERING MODE

2.1 Engineering Mode…………………………………….………………………………………….….…………….4

2.2 Engineering Mode Overview…………………………………………….…………………………..………..….5

CHAPTER 3: ELECTRONIC DIAGRAMS

3.1 Electronic Diagram…………………………………….………………………..……………………….…….….6

CHAPTER 4: TROUBLE SHOOTING

4.1 Troubleshooting – No RPM Displayed…………………………………………………………………………..7

4.2 Troubleshooting – No Resistance or Incorrect Resistance……………………………………………...……8

4.3 Troubleshooting – No Power to the Console………………………………………………………………….10

4.4 Troubleshooting – No or High Heart Rate………………………………………………………………… …..11

4.5 Troubleshooting – Knocking or Creaking Noises……………………………………………………………..12

2

CHAPTER 1: SERIAL NUMBER LOCATION

1.1 Serial Number Location

3

CHAPTER 2: ENGINEERING MODE

2.1 Engineering Mode

1) To enter Engineering Mode, press & hold the LEVEL UP and DOWN keys at the same time for 3-5
seconds until Engineering Menu appears on the display.

2) Use the LEVEL UP and DOWN keys to scroll through a list of parameters.

3) Press the CHANGE DISPLAY / ENTER key to enter a parameter setting.

4) Use the LEVEL UP and DOWN keys to change the parameter and ENTER to save.

5) Press and hold the STOP key to exit Engineering Mode and return to normal operation.

4