Livemix FP-2 User's Guide

FP-2 USER GUIDE

FP-2 rev 1.2

1

FP-2 MULTI FUNCTION FOOT SWITCH

The FP-2 foot pedal allows you to adjust mix settings or activate the intercom on your Livemix
Personal Mixer while keeping your hands on your instrument.

ANATOMY OF THE FP-2

1. BUTTONS 1 & 2: Activates FP-2 functions described below.

23

4

2. IN: Connect a ¼” TRS cable to the foot pedal jack on the CS-DUO or CS-SOLO. Make sure the
cable is a TRS and has Tip, Ring, and Sleeve. A standard TS or guitar cable will not work with the
FP-2.

3. THRU: The THRU connector allows you to connect two foot pedals to one CS-DUO, one for MIX

A and one for MIX B. Use a TRS cable to connect the rst pedal to the second pedal and assign

the A/B Switches accordingly.

4. A/B Switch: Set this switch to ‘A’ to control MIX A or ‘B’ to control MIX B if using with the CS­DUO. If using the CS-SOLO, this will have no effect.

OPERATION OF THE FP-2

The FP-2 foot pedal is simple to use. Each function is controlled by either a TAP or a HOLD on one
of the buttons. A TAP is a short press, less than 1 sec in duration. A HOLD is a long press lasting
more than a second.

1. TAP BUTTON 1: A short tap on button 1 will select the next channel on the personal mixer.
When you reach channel 24 it will select the Accessory Channels, then cycle back to channel 1.

2. HOLD BUTTON 1: A long press on button 1 will return you to the ME Group. A second long
press will select channel 1. If a ME Group is not set up, holding button 1 will return you to
channel 1.

3. TAP BUTTON 2: A short tap on button 2 will turn up the volume of the selected channel.

4. HOLD BUTTON 2: A long press on button 2 will reduce the volume of the selected channel.
The volume of the selected channel will continue to reduce as long as button 2 is held.

5. HOLD BUTTON 1 & BUTTON 2: A long press on both buttons simultaneously will activate the
intercom feature of the CS-SOLO or CS-DUO. You will need to hold both buttons down for a
full second before the intercom activates. The intercom will remain active until the buttons are
released.