AFTER-SALES SERVICE
WARRANTY CARD
After-Sales Information:
Thank you for purchasing LIVALL
product, please read the following
instructions for better service.
1.This product can be replaced within
three months after the date of purchase,
and come with a one year warranty.
2.Damages caused by the following
reasons are not included in the scope of
free warranty:
•Exceeding the specified warranty period;
•Damages caused by failure to follow the
operating instructions;
•Damages caused by unauthorized
disassemble or maintenance by users or
other man-made damages.
3.This warranty card is the important
certificate for the warranty service
provided to the end user, please keep it
well. The card should be taken along with
the product to the manufacturer when the
maintenance is required.
4.Our company reserves the rights to
modification and explanation for above
terms and conditions.
For more information, please visit
www.livall.com.
User Name: _______________________
Tel.: _____________________________
ID No.: ___________________________
Home Address:_____________________
Seller: __________________________
Purchase Date:_____________________
Maintenance Record: ________________
Note: This form should be completed in real
details; otherwise, it would be invalid.
PRODUCT INSTRUCTION OF
LIVALL PHONE HOLDER
Thanks for choosing LIVALL phone
holder. Please read the instructions
carefully before use to ensure safe and
satisfactory operation of this product.
Please retain these instructions for
further reference.
Phone holder
Stem
Battery indicator
Remaining power inquiry
Charging port
Discharge port
I.INSTALL S2
Remove the original stem and replace
it with LIVALL S2 holder.
Original stem Remove the screws
Install S2 on the
front fork
in sequence and
take off the stem
Install the four screws
on the stem cover
II.INSTALL H2
Remove the two screws on the top of the
original stem and install LIVALL H2
phone holder.
Screw
sleeve
III.ADJUST THE ANGLE OF THE PHONE
Rotate the knob
clockwise to
loosen the clips.
Pull the top clip upwards,
put in your mobile phone
and release the top clip
to stabilize your phone.
Rotate the knob counterclockwise to fix
your phone properly.
IV.CHARGE THE PHONE WITH S2
Connect the device to be charged to
the USB port by a USB cable.
During discharging, the remaining
power would be displayed.
V.CHARGE S2
Use a Micro USB cable to connect
the port to a USB charger with
safety approvals such as CCC or UL.
The charging power would be on
display during charging.
VI.CHECK S2 POWER
Press the power button to
check the remaining power, which is
displayed by the icon .
VII.PRODUCT SPECIFICATIONS
Applicable phone size: 4-6 inches
Rotating angle of phone holder: 360°
Vertical turning angle of phone holder:
>200°
Bikes applicable to H2: using M5
screws on the stem; distance between
two screws: 14-34 mm.
The following parameters apply to S2:
Bikes applicable to S2: diameter of
the central handlebar diameter: 31.8
mm; diameter of front fork stem: 28.6
mm.
Battery capacity: 3.7V/5000mAH
Charging port: Micro USB 5V/1A
Charging duration: around 7h
Output port: USB A, 5V/2A output
Button: power checking
Lighting indicator: four level power
indication
Stem length: 120mm
Product size: 180*116*125mm
VIII.PRECAUTIONS
1.If the product is being used for the
first time or if the product has not
been used for a prolonged period, the
battery may self-discharge slowly over
time. Generally, it takes five to six full
charge and discharge cycles for the
battery maximize the performance.
2.Use a charger with safety approvals
such as CCC or UL to charge this
product.
3.Rough handling can cause damage
to the internal precision parts and
structure of the product.
4.Properly store this product and
relevant accessories and place them
out of reach of children.
5.It is normal for the product to get
warmer during charging.
6.Keep the product away from fire or
other heat sources to avoid danger.
7.Avoid contact with metal objects to
the charging port or discharge port;
otherwise, short circuit may occur and
cause damage to the product.
8.Changes or unauthorized repair of
the product could cause the product
failing in normal use and void the
warranty.
Download the app
www.livall.com
Phone Holder
Designed and Assembled in Shenzhen China
H2S2
Phone Holder
Loading...