Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other
household waste. Please use designated collection points or recycling facilities when
disposing of the item.
Do not treat old batteries as household waste. Take them to a designated recycling facility.
MGA Entertainment UK Ltd.
50 Presley Way
Crownhill
Milton Keynes
MK8 0ES
Bucks, UK
0800 521 558
© The Little Tikes Company, an MGA
Entertainment company. LITTLE TIKES® is
a trademark of Little Tikes in the U.S. and
other countries. All logos, names,
characters, likenesses, images, slogans, and
packaging appearance are the property of
Little Tikes.
Little Tikes Consumer Service
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
1-800-321-0183
Printed in China
Visit our website at
www.littletikes.com
to register your product and
to enter our sweepstakes.
(No purchase necessary)
0515-1-E/INT
www.littletikes.com
www.littletikes.co.uk
WARNING
ADULT ASSEMBLY REQUIRED
• Prior to assembly, this package contains small parts: hardware which is a choking
hazard and may contain sharp edges and sharp points. Keep away from children
until assembled.
• Read all instructions before assembly and use of the 3 in 1 Adventure Course™.
• Never leave child unattended. Always keep child in view while using the 3 in 1
Adventure Course™.
• Place product on a flat, level surface free of objects.
• DO NOT suspend strings over product or attach strings to toys.
• Do not use the 3 in 1 Adventure Course™ if it is damaged or broken.
• Do not use until baby / child can sit up by itself. This 3 in 1 Adventure Course™ is
only intended for use with children who can sit upright unassisted at approximately
6 months of age.
• Do not expose the 3 in 1 Adventure Course™ to liquid of any kind as moisture may
damage the unit. Wipe clean with a damp cloth only.
• Constant, competent adult supervision is required while child is using the unit.
WARNING: Not to be used by children over 36 months due to size limitations.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: Modifications not authorized by the manufacturer may void users authority to operate
this device.
CAN ICES-3 (B)/NMB-3(B).
BATTERY SAFETY INFORMATION
• Charging of rechargeable batteries should only be done under adult supervision. Use only size
AA (LR6) alkaline batteries (2 required).
• Never mix old batteries with new batteries, rechargeable (nickel-cadmium) or carbon zinc
with alkaline batteries.
• Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s
instruction.
• Always remove exhausted or dead batteries from the product.
• Dispose of dead batteries properly: do not burn or bury them.
• Do not attempt to recharge non-rechargeable batteries.
• Remove rechargeable batteries from the product before recharging.
• Charging of rechargeable batteries should only be done under adult supervision with batteries
removed from product.
• Avoid short-circuiting battery terminals.
• Remove batteries before placing the unit into storage for a prolonged period of time.
FCC COMPLIANCE
LIMITED WARRANTY
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product
is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available
under this warranty will be the replacement of the defective part or replacement of the product. This
warranty is valid only if the product has been assembled and maintained per the instructions. This warranty
does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other
cause not arising from defects in material and workmanship. *The warranty period is three (3) months for
daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at
www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180
Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty
expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specific
legal rights, and you may also have other rights, which vary from country/state to country/state. Some
countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
OCTOPUS ASSEMBLY
8. Snap the octopus legs (S, T) into the
octopus bases (U, V) and secure each leg
with 6 screws (W). Hint: Match the crab on
the base to the crab slider on the leg. Do
the same for the starfish to make sure the
legs and bases align.
8
9. Fit the pegs on the octopus legs into the
openings on the octopus handle (Q).
Twist the legs to lock them in place.
9
10. Secure the handle to the legs with eight
screws (W).
11. Snap the octopus head (P) into place.
12. Snap the octopus arms (R) into place and
secure each arm with two screws (X).
11
12
13
13. Move the switch under the octopus
handle to low volume or high volume to
hear fun sounds! Place balls (O) in the
octopus arms, pull down on the handle
and watch the balls drop into the bases! (See
“BATTERY INSTALLATION” for switch location.)
ADVENTURE COURSE
Congure the course multiple ways by attaching each section with the connectors.
IMPORTANT INFORMATION
pull
down
S
U
T
V