2 7
Place the front leg (A) on a flat surface
and snap the support bar (E) into place,
aligning the posts and slots.
Place the drum (D) into the front
right leg (A), aligning the posts and
slots as shown.
3 4
E.
D.
A.
WARNING:
• Adult supervision required. Do not leave children unattended.
• Do not expose the unit to moisture of any kind. Wipe the unit with a damp cloth to clean.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep
away from children until assembled.
• To prevent injury (pinching, crushing, or collapse) both leg engagement pins (leaf locks) must be locked into position to keep the product upright.
• Do not use the walker if it is damaged or broken.
• Use only on flat, level surfaces free of objects that could cause the walker to tip over.
• To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.
• Never use near steps, pools, hot surfaces, or areas that may be hazardous to a child.
• Never use near a staircase.
• Never leave child unattended. Always keep child in view while using the walker.
• Never place walker near the windows where cords from blinds or drapes may strangle child.
• Block stairs/steps securely before using walker.
BATTERY SAFETY INFORMATION
• Charging of rechargeable batteries should only be done under adult supervision. Use only “AA” (LR6) alkaline batteries (3 required).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s instruction.
• Always remove exhausted or dead batteries from the product.
• Dispose of dead batteries properly: do not burn or bury them.
• Do not attempt to recharge non-rechargeable batteries.
• Remove rechargeable batteries from the product before recharging.
• Charging of rechargeable batteries should only be done under adult supervision with batteries removed from the product.
• Avoid short-circuiting battery terminals.
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Modifications not authorized by the manufacturer may void users authority to operate this device.
CAN ICES-3 (B)/NMB-3(B).
LIMITED WARRANTY
© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos,
names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Please keep this address and packaging for
reference since it contains important information. Contents, including specifications and colors, may vary from photos depicted on package.
Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or
workmanship for one year * from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes
Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty
is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues
such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. *The warranty period is three
(3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or
write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for
purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other
rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
5
6
Snap the activity table (J) into the front right leg,
aligning the curve of the table with the curve of the leg.
Snap the left leg (B) onto the support bar (E), activity
table (J) and the drum (D).
Check
Orientation!
MUST BE assembled WITH gears
facing toward support bar (E).
Activity table will not disassemble
once snapped into place.
Little Tikes logo
should be facing
spinning drum (D).