Page 1
TE-7-MD-CK
Industrial
Applications
Circulation of highly corrosive acids, •
alkalis, solvents, brine, plating solutions,
sterile solutions, and other highly
corrosive chemicals and solutions that
are compatible with the pump's material
of construction
Features
Non-submersible for in-line use only •
Thermally protected, totally enclosed, •
fan cooled, capacitor start motor
Ball bearings •
Conduit box •
(must be field wired – cord not included)
Specific gravity to 1.1 •
Fluid temperature to 200 °F •
Ambient air temperature to 77 °F •
NOTE: Consult your local distributor or
the factory for applications with
higher ambient temperatures, specific
gravities and viscosities.
Wastewater • Water Systems • HVAC • Industrial • Engineered Products
Construction
Volute • — Carbon-filled Kynar
Backplate • — Carbon-filled Kynar
Impeller • — Carbon-filled Kynar®
w/carbon-filled Teflon® (Chemloy) bushing
Shaft • — Ceramic
Thrust Washers • — Ceramic
O-Ring • — Viton
®
®
®
Page 2
Engineering Data
0
10
20
30
40
50
60
0 10 20 30 40 50 60
Flow - Gallons/Minute
Head - Feet
0
3
6
9
12
15
18
0 40 80 120 160 200
Flow - Liters/Minute
Head - Meters
60 Hz
50 Hz
NOTE: Designs and dimensions may vary for various reasons (i.e. type of motor). This information should be used as
general guide rather than an unqualified guarantee. Specifications are subject to change without prior notice.
Specications
Item
No.
587600 TE-7-MD-CK 3/4
587603
3 Phase
587106 7-MD-CK Pump Head Less Motor 1-1/2" FNPT 1" MNPT 8.00
Model
No. HP Volts Hertz Amps Watts
TE-7-MD-CK 3/4
115 50/60 10.4/11.8 1080/1230
230 50/60 5.2/5.9 1080/1230
230 50/60 2.4/2.9 1080/1230
460 50/60 1.2/1.45 1080/1230
Intake
1-1/2" FNPT 1" MNPT 53 46.7 40 30.8 21.6 58.5 25.5 N/A 40.00
1-1/2" FNPT 1" MNPT 53 46.7 40 30.8 21.6 58.5 25.5 N/A 33.00
Discharge
Size
Performance (GPM @ Head, 60Hz) Shut Off
Size
Power
Cord (ft.)
Weight
(lbs.)1' 10' 25' 40' 50' Feet PSI
Replacement Parts
Item Part No. Description
A 187015 Volute
B 187085 Thrust washer, ceramic
C 187056 Shaft, ceramic
D 187174 Impeller/Bushing
E 924016 O-ring, Viton
F 187024 Backplate
1 903712 Bolt
2 921050 Washer
3 187121 Drive magnet
4 187073 Magnet housing
NOTE: Parts A–F contact uid
Kynar® is a registered trademark of Arkema Inc.
®
is a registered trademark of DuPont Performance Elastomers
Teon
®
is a registered trademark of DuPont Performance Elastomers
Viton
P.O. Box 12010
Oklahoma City, OK 73157-2010
Phone: 1.800.701.7894
Fax: 1.800.678.7867
www.LittleGiantPump.com
®
Performance Data
Little Giant® is a registered trademark of Franklin Electric Co., Inc.
©2010 Franklin Electric Co., Inc.
Form 995789 — 10/10
Loading...