EFFLUENT PUMPS
APPLICATIONS
• Efuent wastewater removal • Dewatering
• Water transfer
FEATURES
• Permanent Split Capacitor (PSC)
• Completely submersible, designed for continuous duty
• 2" NPT (51 mm) discharge
• Handles solids up to 3/4” (19 mm) diameter
• 140 °F (60 °C) liquid temperature rating
• cCSAus listed
20E SERIES 2 HP
SERIES SPECIFICATIONS
Volts Hz
230* 60
460** 60
200-208** 60
230** 60
Item No. Model HP Volts Phase Cord Weight
520200 20E-CIM 2 230
520230 20E-CIM 2 230
520250 20E-CIM 2 230
520275 20E-CIM 2 460
520225 20E-CIM 2 200-208
* Single-phase pumps can use a mechanical oat switch or a single-phase control panel for automatic on/off
** Three-phase pumps must have a three-phase control panel for automatic or manual operation
Amps
FLA Start 20' 30' 40' 60' 80'
16.4 31 3872
5.75 7.5 2571
13.1 32 2478
11.64 28.3 2476
Watts
135 125 110 89 62 110 47.6
135 125 110 89 62 110 47.6
135 125 110 89 62 110 47.6
135 125 110 89 62 110 47.6
1*
3**
3**
3**
3**
Performance
(GPM @ Height in Feet)
20'
6.1 m
30'
9.1 m
20'
6.1 m
20'
6.1 m
20'
6.1 m
92 lbs
41.47 Kg
93.5 lbs
42.41 Kg
92 lbs
41.47 Kg
92 lbs
41.47 Kg
92 lbs
41.47 Kg
Shut-Off
(ft)
PSI
ENGINEERING DATA
Total Head in Meters
20E SERIES 2 HP
A
C
PERFORMANCE DATA
Capacity - Liters per Minute
0 100 200 300 400 500
120
100
80
60
40
Total Head in Feet
20
0
0 20 40 60 80 100 120 140
A B C
17.75"
45.09 cm
35
30
25
20
15
10
5
0
12.93"
32.84 cm
B
8.42"
21.39 cm
CONSTRUCTION
Cover Epoxy-coated cast iron
Motor Housing Epoxy-coated cast iron
Impeller Material Red brass
Impeller Type Vortex
Volute Epoxy-coated cast iron
Mechanical Shaft Seal Carbon/ceramic
Fasteners Stainless steel
Shaft Stainless steel
Bearings
Power Cord SOOW
Upper and lower sintered
sleeve bearings
Capacity - Gallons per Minute
Spec Sheet 995211
Hotline: 1.800.701.7894 www.franklinwater.com
Loading...