Litter-Robot Open Air III Installation Manual

Open Air
Carbon Filter installation Guide
The Litter-Robot is equipped with a Carbon Filter for absorbing odors and controlling moisture in the Waste Drawer. The flexible filter pad can be removed and replaced when cleaning the drawer.
For optimal odor control, we recommend changing the filter every three months. If you use scented litter, change the filter more frequently, as it will also absorb the fragrance.
Replacement Carbon Filters can be ordered at www.litter-robot.com.
Removal:
1. Pull out the Waste Drawer and locate the Carbon Filter in the front wall.
2. Push the top edge of the filter downward to free it from the hooks.
3. Pull the filter out of the slot and discard.
Installation:
1. In the front wall of the Waste Drawer, slide the new filter into the slot.
2. Bend the top edge of the filter and slide it under each hook.
3. Adjust the filter, so it covers the front-facing vent completely.
Note: It is normal for the Carbon Filter to shed during installation. Simply wipe up or vacuum any debris.
Slot
Hooks
Properly installed Carbon Filter
Visit www.litter-robot.com for installation videos.
Headquarters
2900 Auburn Ct. Auburn Hills, MI 48326
Assembly
561 S Fairfield Ave Juneau, WI 53039
Contact Customer Service
Monday - Friday, 9am - 5pm EST 1-877-250-7729 or support@litter-robot.com
Loading...