
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Uni-directional
Agency Approvals
AGENCY AGENCY FILE NUMBER
Maximum Ratings and Thermal Characteristics
(T
=25OC unless otherwise noted)
A
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
T
=25ºC by 10/ 10 00µs waveform
A
(Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat
sink at T
Peak For ward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
Typical Thermal Resistance Junction
to Lead
Typical Thermal Resistance Junction
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above T
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
=50OC
A
TVS Diode Arrays (SPA
Bi-directional
E230531
P
PPM
P
M(AV)
I
FSM
V
, T
T
J
R
uJL
R
uJA
F
-55 to 150 °C
STG
= 25OC per Fig. 2.
A
3000 W
6.5 W
300 A
3.5 V
15 °C/W
75 °C/W
RoHS
Description
™
Family of Products)
The SMDJ-HRA High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events. These are available with a variety of upscreening options for enhanced reliability.
Features
• Highreliabilitydevices
with fabrication and
assembly lots traceability
• Enhancedreliability
screening options are
available in reference to
MIL-PRF-19500. Refer to
screen process table for
more detail on screening
options
• Forsurfacemounted
applications in order to
optimize board space
• Lowprolepackage
• Built-instrainrelief
•
VBR @TJ= VBR@25°C x (1+αT
x (TJ - 25))
(αT:Temperature Coefficient)
• Glasspassivatedchip
junction
• 3000Wpeakpulsepower
capability at 10/1000μs
• Fastresponsetime:
typically less than 1.0ps
from0VtoBVmin
• Excellentclamping
capability
• Lowincrementalsurge
resistance
• TypicalI
less than 2µA
R
above 12V
• HighTemperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plasticpackagehas
Underwriters laboratory
flammability 94V-O
•MeetMSLlevel1,per
J-STD-020, LF maximun
peak of 260
°C
• Mattetinlead–freeplated
•HalogenfreeandRoHS
compliant
waveform, repetition rate
(duty cycles):0.01%
Functional Diagram
Cathode
SMDJ-HRA Series
Bi-directional
Uni-directional
Anode
Applications
SMDJ-HRA devices are ideal for the high reliability
protection of I/O Interfaces, V
bus and other vulnerable
CC
circuits used in Telecom, Computer, Industrial and
Consumer electronic applications.
1
48
Specifications are subject to change without notice.
©2013 Littelfuse, Inc.
Revised: 11/18/13

Electrical Characteristics
Transient Voltage Suppression Diodes
Surface Mount – 3000W > SMDJ-HRA series
Part
Number
(Uni)
Number
TVS Diode Arrays (SPA
Part
Marking
(Bi)
UNI BI MIN MAX
SMDJ5.0A-HRA
SMDJ6.0A-HRA
SMDJ6.5A-HRA
SMDJ7.0A-HRA
SMDJ7.5A-HRA
SMDJ8.0A-HRA
SMDJ8.5A-HRA
SMDJ9.0A-HRA
SMDJ10A-HRA
SMDJ11A-HRA
SMDJ12A-HRA
SMDJ13A-HRA
SMDJ14A-HRA
SMDJ15A-HRA
SMDJ16A-HRA
SMDJ17A-HRA
SMDJ18A-HRA
SMDJ20A-HRA
SMDJ22A-HRA
SMDJ24A-HRA
SMDJ26A-HRA
SMDJ28A-HRA
SMDJ30A-HRA
SMDJ33A-HRA
SMDJ36A-HRA
SMDJ40A-HRA
SMDJ43A-HRA
SMDJ45A-HRA SMDJ45CA-HRA
SMDJ48A-HRA SMDJ48CA-HRA
SMDJ51A-HRA SMDJ51CA-HRA
SMDJ54A-HRA SMDJ54CA-HRA
SMDJ58A-HRA SMDJ58CA-HRA
SMDJ60A-HRA SMDJ60CA-HRA
SMDJ64A-HRA SMDJ64CA-HRA
SMDJ70A-HRA SMDJ70CA-HRA
SMDJ75A-HRA SMDJ75CA-HRA
SMDJ78A-HRA SMDJ78CA-HRA
SMDJ85A-HRA SMDJ85CA-HRA
SMDJ90A-HRA SMDJ90CA-HRA
SMDJ100A-HRA SMDJ100CA-HRA
SMDJ110A-HRA SMDJ110CA-HRA
SMDJ120A-HRA SMDJ120CA-HRA
SMDJ130A-HRA SMDJ130CA-HRA
Note:
1. For bidirectional type having V
2.SMDJ-HRA voltage binning can be specified by customer ’s request via contacting Littlefuse service
SMDJ5.0CA-HRA RDEH DDEH 5.0 6.40 7. 0 0 10 9.2 326.1 800 X
SMDJ6.0CA-HRA RDGH DDGH 6.0 6.67 7.37 10 10.3 291.3 800 X
SMDJ6.5CA-HRA RDKH DDKH 6.5 7.22 7.98 10 11. 2 267.9 500 X
SMDJ7.0CA-HRA PDMH DDMH 7. 0 7.78 8.60 10 12.0 250.0 200 X
SMDJ7.5CA-HRA PDPH DDPH 7. 5 8.33 9.21 1 12.9 232.6 100 X
SMDJ8.0CA-HRA PDRH DDRH 8.0 8.89 9.83 1 13.6 220.6 50 X
SMDJ8.5CA-HRA PDTH DDTH 8.5 9.44 10.40 1 14.4 208.3 20 X
SMDJ9.0CA-HRA PDVH DDVH 9.0 10.00 11. 1 0 1 15.4 194.8 10 X
SMDJ10CA-HRA PDXH DDXH 10.0 11. 1 0 12.30 1 1 7. 0 176.5 5 X
SMDJ11CA-HRA PDZH DDZH 11. 0 12.20 13.50 1 18.2 164.8 2 X
SMDJ12CA-HRA PEEH DEEH 12.0 13.30 14.70 1 19.9 150.8 2 X
SMDJ13CA-HRA PEGH DEGH 13.0 14.40 15.90 1 21.5 139.5 2 X
SMDJ14CA-HRA PEKH DEKH 14.0 15.60 17.20 1 23.2 129.3 2 X
SMDJ15CA-HRA PEMH DEMH 15.0 16.70 18.50 1 24.4 123.0 2 X
SMDJ16CA-HRA PEPH DEPH 16.0 17.80 19.70 1 26.0 115.4 2 X
SMDJ17CA-HRA PERH DERH 1 7. 0 18.90 20.90 1 27.6 108.7 2 X
SMDJ18CA-HRA PETH DETH 18.0 20.00 22.10 1 29.2 102.7 2 X
SMDJ20CA-HRA PEVH DEVH 20.0 22.20 24.50 1 32.4 92.6 2 X
SMDJ22CA-HRA PEXH DEXH 22.0 24.40 26.90 1 35.5 84.5 2 X
SMDJ24CA-HRA PEZH DEZH 24.0 26.70 29.50 1 38.9 77.1 2 X
SMDJ26CA-HRA PFEH DFEH 26.0 28.90 31.90 1 42.1 71.3 2 X
SMDJ28CA-HRA PFGH DFGH 28.0 31.10 34.40 1 45.4 66.1 2 X
SMDJ30CA-HRA PFKH DFKH 30.0 33.30 36.80 1 48.4 62.0 2 X
SMDJ33CA-HRA PFMH DFMH 33.0 36.70 40.60 1 53.3 56.3 2 X
SMDJ36CA-HRA PFPH DFPH 36.0 40.00 44.20 1 58.1 51.6 2 X
SMDJ40CA-HRA PFRH DFRH 40.0 44.40 49.10 1 64.5 46.5 2 X
SMDJ43CA-HRA PFTH DFTH 43.0 47.80 52.80 1 69.4 43.2 2 X
PFVH DFVH 45.0 50.00 55.30 1 72.7 41.3 2 X
PFXH DFXH 48.0 53.30 58.90 1 77.4 38.8 2 X
PFZH DFZH 51.0 56.70 62.70 1 82.4 36.4 2 X
RGEH DGEH 54.0 60.00 66.30 1 87.1 34.4 2 X
PGGH DGGH 58.0 64.40 71.20 1 93.6 32.1 2 X
PGKH DGKH 60.0 66.70 73.70 1 96.8 31.0 2 X
PGMH DGMH 64.0 71.10 78.60 1 103.0 29.1 2 X
PGPH DGPH 70.0 77.80 86.00 1 113.0 26.5 2 X
PGRH DGRH 75.0 83.30 92.10 1 121.0 24.8 2 X
PGTH DGTH 78.0 86.70 95.80 1 126.0 23.8 2 X
PGVH DGVH 85.0 94.40 104.00 1 137.0 21.9 2 X
PGXH DGXH 90.0 100.00 111. 00 1 146.0 20.5 2 X
PGZH DGZH 100.0 111.0 0 123.00 1 162.0 18.5 2 X
PHEH DHEH 110.0 122.00 135.00 1 177.0 16.9 2 X
PHGH DHGH 120.0 133.00 147.00 1 193.0 15.5 2 X
PHKH DHKH 130.0 144.00 159.00 1 209.0 14.4 2 X
of 10 volts and less, the IR limit is double.
R
Reverse
Stand off
Voltage
V
(Volts)
R
Breakdown
™
Voltage V
(Volts) @ I
Maximum
BR
T
Test
Current
I
T
(mA)
Clamping
Voltage V
@ Ipp
(V)
Family of Products)
Maximum
Peak
Pulse
C
Current Ipp
(A)
Maximum
Reverse
Leakage IR
@ V
R
(µA)
Agency
Approval
SMDJ-HRA Series
2
49
Specifications are subject to change without notice.
©2013 Littelfuse, Inc.
Revised: 11/18/13