Littelfuse M0700 User Manual
M0700 Optional Print Cards
M0700-20
OUTPUT BOARD WITH RELAYS
AND OPEN COLECTOR
OUTPUT
29-
28+
29
28
27
27
M-CONTROLLER
18
18
17
17
81
61
52
72
71
51
M0700-11 -21 -26
OUTPUT BOARD WITH RELAYS
OUTPUT
29-
28+
27
M-CONTROLLER
18
17
81
29
28
-
+
61
71
72
52
51
M0700-10
POSITIV OUTPUT BOARD
(OPEN COLLECTOR)
OUTPUT
28
28
29
29
27
27
M-CONTROLLER
17
17
+
-
+
49
48
47
37
M0700-22
INPUT BOARD WITH RELAYS
52
72
51
71
60
80
M-CONTROLLER
INPUT
2
-
1
10
1
2
10
- 29
M0700-00 Universal PC Board
On the rear of M1000, M2000 and M2100
controllers a general useable auxiliary
PC board can be connected for easy
soldering of resistors and diodes to be
used on both inputs and outputs.
M0700-20 Relay PC Board
On the rear of M1000, M2000 and M2100
controllers a relay PC-Board can be
mounted, which gives galvanic isolation
between the controller and one external
relay contact per channel. For channel 1
a contact is available between terminals
51 and 71, channel 2 on 52 and 72 etc.
Contact specifications
AC : 125V, 1A, 60VA
DC : 150V, 1A, 30W
Isolation : 1500V
M0700-10 Positive Output PC
Board
On the rear of M1000, M2000 and
M2100 controllers an auxiliary PC board
M0700-10 can be connected. When
mounted on the controllers output
terminals, it changes the output from
negative going to positive going. Max.
80V, max. 0.1A.
Fig. 1. M0700-20 Relay PC Board
Fig. 2. M0700-10 Positive Output PC Board Fig. 3. M0700-22 Input Board
SELCO Worldwide
Main office:
SELCO A/S
Betonvej 10
DK-4000 Roskilde
Denmark
Phone: + 45 7026 1122
Fax: + 45 7026 2522
e-mail: selco.dk@selco.com
www.selco.com
Type Selection Table
M0700.0010 Universal PC board for 12V-110V DC
M0700.0020 Positive output board 12V-48V DC
M0700.0030 Output board with relays 12V DC
M0700.0040 Output board with relays and open collectors 24V DC
M0700.0050 Output board with relays 110V DC
M0700.0060 Board for RS-485 12V-48V DC
M0700.0070 Output board with relays 48V DC
M0795-62E
Loading...