LITTELFUSE ICTE, MPTE User Manual

MM

M

MM

INIAINIA

INIA

INIAINIA

TURETURE

TURE

TURETURE

F F

F

F F

Holder / No.

USEHOLDERSUSEHOLDERS

USEHOLDERS

USEHOLDERSUSEHOLDERS

800800

800

800800

Panel Mount, ShocksafePanel Mount, Shocksafe

Panel Mount, Shocksafe

Panel Mount, ShocksafePanel Mount, Shocksafe
5x20mm / 6.3x32mm Fuses5x20mm / 6.3x32mm Fuses

5x20mm / 6.3x32mm Fuses

5x20mm / 6.3x32mm Fuses5x20mm / 6.3x32mm Fuses

Fuse carrier inserted

max. 0,2

12,7x1,5
M

0,5

4,45

7,62

SpecificationsSpecifications

Specifications

SpecificationsSpecifications

StandardStandard

Standard

StandardStandard

IEC 60127-6
UL 512
CSA C22.2. No.39

ApprovalsApprovals

Approvals

ApprovalsApprovals

VDE: License No. 122016
SEMKO: Certificate No. 9850284
UL Recognized: File No. E 70164
CSA Certified: File No. 47574

11,7 -0,15

12,7 -0,1

Panel alternatives

12,7 -0,1

Cap / No.

For 5x20mm FusesFor 5x20mm Fuses

For 5x20mm Fuses

For 5x20mm FusesFor 5x20mm Fuses

Cap / No.

For 6.3x32mm FusesFor 6.3x32mm Fuses

For 6.3x32mm Fuses

For 6.3x32mm FusesFor 6.3x32mm Fuses

Order InformationOrder Information

Order Information

Order InformationOrder Information

PackagingPackaging

Packaging

PackagingPackaging

Bulk (100 pcs.)

Order NumbersOrder Numbers

Order Numbers

Order NumbersOrder Numbers

Holder No. 800 0000 000
Cap, 5x20mm No. 815 0000 000
Cap, 6.3x32mm No. 816 0000 000

815815

815

815815

816816

816

816816

12 -0,1

Bayonet-joint

∅ 15

WW

ebLinksebLinks

W

ebLinks

WW

ebLinksebLinks

Further infos see:Further infos see:

Further infos see:

Further infos see:Further infos see:

www.wickmanngroup.com

Further application infos seeFurther application infos see

Further application infos see

Further application infos seeFurther application infos see
Fuseology:Fuseology:

Fuseology:

Fuseology:Fuseology:

www.wickmanngroup.com/download/
fuseology.pdf

5,5 1...6 5

9,2

∅

9,2

∅

Slot for screwdriver

Slot for screwdriver

∅ 16

SW14

45,7

Bayonet-connector-nose

1,5

max. 34

Bayonet-connector-nose

1,5

max. 33,8

MountingMounting

Mounting

3,2 2,5

8

7

1,2

7

1,2

MountingMounting

12.7mm diameter D-hole or double D-hole
Admissible torque on plastic hex nut is 1.2Nm

4,8

TT

erminalserminals

T

erminals

TT

erminalserminals

Solderable or 4.8mm quick connect-fits 0.5mm tab

Protection Class & CategoryProtection Class & Category

Protection Class & Category

Protection Class & CategoryProtection Class & Category

IP 40 (IEC 60529)
PC2 (IEC 60127-6)

MaterialsMaterials

Materials

MaterialsMaterials

Holder/Cap: Black Thermoplastic

Metal Parts: Copper alloy,

Terminals: Solderable, tinned

Electrical Data (23ºC)Electrical Data (23ºC)

Electrical Data (23ºC)

Electrical Data (23ºC)Electrical Data (23ºC)

Rated Voltage: 250V
Rated Current: 6.3A (800+815 - VDE/SEMKO)

Rated Power: 2.5W (VDE/SEMKO)

Operating TOperating T

Operating T

Operating TOperating T

-25ºC to +70ºC (consider de-rating)

Climatic TClimatic T

Climatic T

Climatic TClimatic T

-25ºC/+70ºC/21 days (IEC 60068-2-1...3)

Stock ConditionsStock Conditions

Stock Conditions

Stock ConditionsStock Conditions

+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%

Vibration ResistanceVibration Resistance

Vibration Resistance

Vibration ResistanceVibration Resistance

24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration

Contact ResistanceContact Resistance

Contact Resistance

Contact ResistanceContact Resistance

≤ 5mΩ

Dielectric StrengthDielectric Strength

Dielectric Strength

Dielectric StrengthDielectric Strength

> 1.5 kV

Impulse VoltageImpulse Voltage

Impulse Voltage

Impulse VoltageImpulse Voltage

4 kV, 50 Hz, 1 min., dry

Insulation ResistanceInsulation Resistance

Insulation Resistance

Insulation ResistanceInsulation Resistance

> 103 MΩ (500 VDC, 1 min.)

SolderabilitySolderability

Solderability

SolderabilitySolderability

235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)

Soldering Heat ResistanceSoldering Heat Resistance

Soldering Heat Resistance

Soldering Heat ResistanceSoldering Heat Resistance

260ºC, 5 sec. (IEC 60068-2-20)

Minimum Cross SectionMinimum Cross Section

Minimum Cross Section

Minimum Cross SectionMinimum Cross Section

Conductor - 2.5mm

MarkingMarking

Marking

MarkingMarking

800, 250V, Approvals

Unit WeightUnit Weight

Unit Weight

Unit WeightUnit Weight

4.7g (Holder) / 2.5g (Cap)

emperatureemperature

emperature

emperatureemperature

estest

est

estest

Polyamide PA 6.6, UL94 V-0

corrosion protected

10A (800+816 - VDE/SEMKO)
16A (UL/CSA)

2

WebSite Europe Tel: [phone] Americas Tel: [phone] Asia Tel: [phone] China Tel: [phone]

www.wickmanngroup.com E-mail: [e-mail] E-mail: [e-mail] E-mail: [e-mail] E-mail: [e-mail]

050906

WICKMANN Group |

save as HTML | close window

holder / no.
800

Online Stock check1

Product number

80000000000

Design

fuse-holder for front-panel mounting

Series

800

Product name

holder / no. 800

Product description

panel mount, 5x20 mm / 6,3x32 mm fuses

Product base number

8000000

Data sheet

show

Rated voltage

250 V

Rated current

6.3 A

Standard

IEC 60127-6

Standard

UL 512

Standard

CSA C22.2 No.39

Voltage AC/DC

AC

Unit weight per piece

4.2 g

Features

voltage: 250V rated current: 6,3 A (800 and 815 - VDE/SEMKO) 10
A (800 and 816 - VDE/SEMKO) 16 A (UL/CSA) rated power: 2,5 W
(VDE/SEMKO)

Mounting additional info

12,7 mm diameter D-hole or double D-hole admissible torque on
plastic hex nut is 1,2 Nm

Mouting

Solderable or 4,8 mm for quick connect-fits 0,5 mm tab.

available packagings

packing box (100 pcs.)

Category

PC2 (IEC 60127-6)

Protection class

IP 40 (IEC 60529)

Used with cap

used with cap 815

Used with cap

used with cap 816

http://www.wickmann.com/englisch/catalog/dataSheet.jsp?lang=en&Id=4818 (1 of 4)18/01/2006 14:59:41