Littelfuse H4200 HMI User Manual

Engine Control

Alarm Monitoring

Operator Interface

H4000 HMI SERIES

Operator Panels

Description

The HMI operator panel is a touch-screen solution for SCADA
solutions, designed for applications like engine control and
supervision systems, power management systems and alarm
systems. They can be integrated with products such as the
M2500, Engine Controller, Generator Controllers and Alarm
Panels.

The clear, high-resolution screen provides a high level of
details on images, charts, meters and alarms.

The SELCO HMI solutions support a broad variety of
communication buses, MODBUS-RTU, and can work as
gateways between different bus protocols such as Ethernet
to MODBUS. The operator panel is configured with a software
tool.

Available in three sizes: H4000 6,5”, H4100 10,4”, H4200 15,1”.
The units are marine approved.

Features & Benefits

FEATURES BENEFITS

Clear, high-resolution
screen

Wide range of
communication interfaces

Sun-readable versions Clear image even in direct sunlight

Type-approved by marine
classification societies

High level of details (images, charts,
meters and alarms)

Compatible with many
communication protocols

Approved for marine alarm systems

Ordering Information

ORDERING NUMBER DESCRIPTION

H4000.0010 HMI Panel 6,5”

H4000.0020 HMI Panel 6,5”, sun readable

H4100.0010 HMI Panel 10,4”

H4100.0020 HMI Panel 10,4” sun readable

H4200.0010 HMI Panel 15,1”

H4200.0020 HMI Panel 15,1” sun readable

H4900.0010 Programming Software

Specifications

Front Panel Dimension H4000: H 219 mm (8.6”); W 154 mm (6.0”);

D 6 mm (0.2”)

H4100: H 302 mm (11.9”); W 228 mm (9.0”);

D 6 mm (0.2”)

H4200: H 398 mm (15.7”); W 304 mm (12.0”);

D 6 mm (0.2”)

Mounting Depth H4000: 56 mm (2.2”),156 mm including clearance
H4100: 58 mm (2.3”),158 mm including clearance
H4200: 60 mm (2.4”),160 mm including clearance
Front Panel Seal IP 66
Rear Panel Seal IP 20

Serial Port RS422/ RS485
Serial Port RS232C
Ethernet Shielded RJ 45
USB Host type A (USB 1.1),

max output current 500 mA Device type B (USB 1.1)

CF-Slot Compact flash, type I and II
Flash Memory

for Application 12 MB (incl. fonts)
Power Consumption at Rated Voltage
H4000: Normal: 0.4 A; Maximum: 0.9 A

H4100: Normal: 0.5 A; Maximum: 1.0 A
H4200: Normal: 1.2 A; Maximum: 1.7 A

Display TFT-LCD, 64K color. CCFL backlight lifetime at

the ambient temperature of +25˚C: >50,000 h.

H4000: 640 x 480 pixels
H4100: 800 x 600 pixels
H4200: 1024 x 768 pixels

Active Area of Display H4000: 132.5 mm (5.2”) x 99.4 mm (3.9”)
H4100: 211.2 mm (8.3”) x 158.4 mm (6.2”)
H4200: 304.1 mm (12.0”) x 228.1 mm (9.0”)

Power Supply +24 Vdc (20-30 Vdc)
Ambient Temperature Horizontal installation: 0˚C to +40˚C
Storage Temperature –20˚C to +70˚C
Relative Humidity 5-85 % non-condensed

© 2013 Littelfuse Protection Relays & Controls
www.littelfuse.com/h4200

Rev: 4-A-050313