Littelfuse Flex-MEGA Holder User Manual
Fuse Holder
MEGA®-FLEX Holder for MEGA® Fuses
Specifications:
Max. Voltage Rating: 32 VDC
Max. Current Rating: 500A
Operating Temperature Range: -40˚C to +125˚C
Wire Size: 70 - 8 mm
Recommended Fuse Installation Torque: 12 - 18Nm
Recommended Mounting (using M6 Screw/Washer): 5Nm
Base Material: UL94V0 Glass-
filled PPA
Cover Material: UL94V0
Elastomer
The MEGA®-FLEX fuse holder is used with the MEGA® style
bolt-down fuse, which is available up to 500A. This holder offers
a flexible cover, which allows cable entry from virtually any
direction, large wire size, and ring terminal stack up. Slots on
the base allow holder to be mounted with tie wraps. Dovetail
features allow you to interlock multiple MEGA
holders together for a high power distribution block. Bus bars are
avalable for multiple holder applications.
®
-FLEX fuse
2
Part Number Description
02981028HXFCB Base-only (No Hardware) Zinc-Plated Steel
02981028HXFCC Cover-only -
02981028HXFC Assembly Zinc-Plated Steel
02981028HXFC-SS Assembly Stainless Steel
882-835-2 2-Position bus Bar Tin-Plated Copper
882-835-3 3-Position bus Bar Tin-Plated Copper
882-835-4 4-Position bus Bar Tin-Plated Copper
882-835-5 5-Position bus Bar Tin-Plated Copper
Material
(Studs and hardware)
1
www.littelfuse.com
© 2009 Littelfuse • Automotive Circuit Protection Products
Fuse Holder
MEGA®-FLEX Holder for MEGA® Fuses
Dimensions in mm
2
www.littelfuse.com
© 2009 Littelfuse • Automotive Circuit Protection Products
Loading...