Littelfuse 866 User Manual
Cartridge Fuse Holders
VDE
Enclosed Fuseholders > Panel/Circuit Board Mounted
860/862 Series Enclosed Fuse Holders for 5×20mm and 6.2x32mm Fuses
Product Characteristics 860
865 Cap
FOR 5 ×2 0MM F USES
866 Cap
FOR 6.3×32MM FUSES
Agency Approval
Agency Agency File Number
40003287 136720 UG
608490 608486
E70164 E70164
Additional Information
Datasheet
860 Series
Datasheet
862 Series
Resources
860 Series
Resources
862 Series
860 Series Holder
PANEL MOUNTED
862 Series Holder
CIRCUIT BOARD MOUNTED
Samples
860 Series
Samples
862 Series
860 Series 862 Series
Compatible
Fuses
Materials
Electrical Data
(23ºC)
Mounting
Terminals
Protection Class
& Category
Operating
Temperature
Climatic Test -40ºC/+85ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
Vibration
Resistance
Contact
Resistance
Impulse Voltage 4 kV, 50Hz, 1 min., dry
Insulation
Resistance
Solderability
Soldering Heat
Resistance
Minimum Cross
Section
Marking 860, 250V, Approvals
Unit Weight 5.3g (860) / 3.3g (865) / 2.5g (866)
5×20mm
6.3×32mm
Holder/Cap: Black Thermoplastic, UL 94V0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable tinned
Rated Voltage: 250V
Rated Current:
10A (VDE/SEMKO) 16A
(CSA) 20A (UL)
Rated Power:
4.0W (VDE/SEMKO)
12.7mm diameter D-hole or
double D-hole Admissible
torque on plastic hex nut is
1.2Nm
Solderable or 4.8mm quick
connect-fits 0.5mm tab
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
-40ºC to +85ºC (consider
de-rating)
+10ºC to +60ºC relative humidity ≤ 75% yearly average, without
dew, maximum value for 30 days - 95%
24 cycles at 15 min. each
(IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 500Hz at 10g acceleration
≤ 5mΩ
3
MΩ (500VDC, 1 min.)
> 10
235ºC, 2 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
350ºC, 5 sec. (IEC 60068-2-20)
Conductor - 2.5mm
2
5×20mm
6.3×32mm
Rated Current:
10A (VDE/SEMKO SEV)
16A (UL/CSA)
Rated Power:
862/865: 2.5W
(VDE/SEV)
862/866: 3.2W
(VDE/SEV)
(2) Solder pins 0.5mm×1.1mm and
plastic stud
Pins are kicked for optimal
soldering
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
-40ºC to +85ºC (consider derating)
Conducting path - 0.2mm
2
Specifications are subject to change without notice.
© 2013 Littelfuse, Inc.
Revised: 12/19/13
Cartridge Fuse Holders
4,8
6,5
1,8
Æ15 + 0,3
4 + 0,2
max. 7
12,5
53,7 + 0,5
0,5
M12,7x1,5
12,7 -0,1 12,7 -0,1
11,7 -0,15
12,2 -0,13
max. 5
Æ11,1 + 0,15
5
6,2
17,8 15,24
45 + 0,5
12,4 + 0,2
6,5
1,8
Æ12,2 + 0,2
4,5 + 0,5
6,35
min. 11,5
1,05 + 0,5
1,3 +0,1
17,8 +0.1
1,3 +0,1
Stud
15,24 +0.1
Holes in the printed circuit board: 1,3 +0,1
1,6
Æ9,1 + 0,3
10,2
31 + 0,5
6,5
1,8
1,6
Æ9,1 + 0,3
10,2
25,6 + 0,6
1,8
6,5
Enclosed Fuseholders > Panel/Circuit Board Mounted
Dimensions 860
860 Series
Ordering Information
Description Ordering Number Packaging
Cap, 5×20 mm 865 0000 000 Bulk 100
Cap, 2x25 mm 866 0000 000 Bulk 100
860 Series Holder 860 0000 000 Bulk 100
862 Series Holder 862 0000 000 Bulk 100
862 Series
865 Cap
866 Cap
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Loading...