Littelfuse 834 User Manual
Cartridge Fuse Holders
Fuse carrier inserted
Bayonet-joint
max. 0,2
5,5
32
12,7
ø
15
Printed circuit board
12,7 7,62
1,8
0,5
5
1,65
ø2 -0,05
Stud
5,08
1,1
0,5
15
Holes in printed circuit board: 1,3 + 0,1
Stud
7,62
12,7
5,08
2 + 0,1
ø
12,7
ø
15
Fuse carrier inserted
12,7
Bayonet joint
12,7
32,6
max. 0,2
0,6
3
5
Printed circuit board
1,1
5,08
Holes in the printed circuit board: 1,3 + 0,1
7,62
4,45
1,3 + 0,1
5,08
ø
9,2
Bayonet-join
t
Fuse-carrier inserted
1,1
ø
12,7
32,6 max.0,2
3
5
0,6
Printed circuit board
12,7
12,7
10±0,1
Holes in the printed circuit board
Ø 1 ,3
±
0,1
Bayonet-connector-nose
max. 20,6
1,5
Slot for screwdriver
1,2
ø
9,2
7
Slot for screwdriver
Bayonet-connector-nose
max. 29,6
1,2
7
1,5
ø
9,2
Enclosed Fuseholders > Circuit Board Mounted
830/831/834 Series Circuit Board Mount Enclosed Fuse Holders
Product Characteristics
835 Cap
FLUSh MOUNT TyPE
837 Cap
FINgER gRIP TyPE
Not for new designs - refer to No. 862
Product Dimensions
830 Series
834 Series
830 Series Holder
831 Series Holder
834 Series Holder
831 Series
835 Cap
837 Cap
830 Series 831 Series 834 Series
Compatible
Fuses
Materials
Electrical Data
(23ºC)
Mounting
Protection
Class &
Category
Operating
Temperature
Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock
Conditions
Vibration
Resistance
Contact
Resistance
Dielectric
Strength
Impulse
Voltage
Insulation
Resistance
Solderability
Soldering Heat
Resistance
Minimum
Cross Section
Marking
Unit Weight
Agendy approvals and ordering infornation is included on the next page.
for 5×20 mm Fuses, 213, 215, 216, 217, 218, 219, 232,
233, 234, 235, and 239 Series
Holder/Cap: Black Thermoplastic Polyamide PA 6.6,
UL94 V-0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO) 16A (UL/CSA)
Rated Power:
1.6W (VDE/
SEMKO)
(3) Solder pins
0.5mm×1.1mm
and plastic stud.
The pins spaced
at 5.08mm
form a common
Rated Power:
2.5W (VDE/
SEMKO)
(4) Solder pins
0.5mm×1.1mm
The pins spaced
at 5.08mm
form a common
connection.
Rated Power:
2.5W (834+835
- VDE/SEMKO)
(2) Solder pins
0.5mm×1.1mm
connection.
IP 40 (IEC 60529) PC2 (IEC 60127-6)
-25 °C to 70 °C (consider de-rating)
+10ºC to +60ºC relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at
0.75mm amplitude 60 - 2000Hz at 10g acceleration
≤ 5mΩ
> 1.5 kV
4 kV, 50 Hz, 1 min., dry 4 kV with
1,2µs/50µs
3
MΩ (500 VDC, 1 min.)
> 10
235ºC, 2 sec.
(Soldering bath)
235ºC, 3 sec. (Wave) 350ºC, 1 sec.
(Soldering Iron)
(IEC 60068-2-20)
350ºC, 3 sec.
(Soldering Iron)
(IEC 60068-2-20)
260ºC, 5 sec. (IEC 60068-2-20)
260ºC, 5 sec.
(Soldering bath)
(IEC 60068-2-20)
Conducting path - 0.2mm
830, 250V,
Approvals
4.4g (Holder) /
1.6g (835) / 2.2g
(837)
2
831, 250V,
Approvals
4.1g (Holder) /
1.6g (835) / 2.2g
(837)
834, 250V,
Approvals
3,5g (834) / 1,6g
(835) / 2,2g
(837)
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Cartridge Fuse Holders
Enclosed Fuseholders > Circuit Board Mounted
Agency Approval
Agency Agency File Number
830 Series 831 Series 834 Series
120623 123441 006913 UG
608509 608510 608511
E70164
47574
Ordering Information
Ordering PN Description
Fuseholder
830 0000 0005 ACS 5×20mm Fuseholder 830 Series for 250V
831 0000 0005 ACS 5×20mm Fuseholder 831 Series for 250V
834 0000 0005 ACS 5×20mm Fuseholder 834 Series for 250V
Fuseholder Cap
835 0000 0005 ACS 5×20mm Fuseholder CAP 835 Series
837 0000 0005 ACS 5×20mm Fuseholder CAP 837 Series
Additional Information
Datasheet
830 Series
Datasheet
831 Series
Datasheet
834 Series
Resources
830 Series
Resources
831 Series
Resources
834 Series
Samples
830 Series
Samples
831 Series
Samples
834 Series
Specifications are subject to change without notice.
© 2013 Littelfuse, Inc.
Revised: 12/19/13
Loading...