Littelfuse 434 User Manual

Surface Mount Fuses
®
®
®
Thin Film > 0603 Size > Very Fast Acting > 434 Series
Agency Approvals
Agency Agency File Number Ampere Range
®
Electrical Characteristics for Series
% of Ampere
E10480 250mA - 3A
LR29862 250mA - 3A
®
Rating
100% 4 hours, Minimum
200% 5 seconds, Maximum.
300% 0.2 seconds, Maximum
Opening Time at 25
®
Description
The 434 series fast-acting surface mount fuse series is an ultra small (0603 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices.
For RoHS compliant and lead-free design, please refer to the Littelfuse 467 series thin film fuse.
Features
t 5IF4MJN-JOF
fuse is an extremely small, low profile design (0603 chip size) utilizing thin-film technology to achieve precise control of electrical characteristics.
t 5IFMPXFSIFJHIUQSPmMF
produces a flat surface for improved performance in pick-and-place operations and an alternate solution for height critical applications.
Applications
Secondary protection for space constrained applications such as:
t $FMMQIPOFT
O
C
t #BUUFSZQBDLT
t %7%QMBZFST
t )BSEEJTLESJWFT
t %JHJUBMDBNFSBT
Electrical Specifications by Item
Ampere
Rating
(A)
0.250 .250 32
0.375 .375 32 0.2650 0.0053 x x
0.500 .500 32 0.1903 0.0087 x x
0.680 .680 32 0.1250 0.0109 x x
0.750 .750 32 0.1140 0.0171 x x
1.00 001. 32 0.0720 0.0212 x x
1.25 1.25 32
1.50 01.5 32 0.0480 0.0526 x x
1.75 1.75 32 0.0390 0.0661 x x
2.00 002. 32 0.0360 0.1040 x x
2.50 02.5 32 0.0280 0.1750 x x
3.00 003. 32 0.0230 0.1980 x x
3.50 03.5 32 0.0190 0.2650 x x
4.00 004. 32 0.0170 0.3520 x x
5.00 005. 32 0.0130 1.2970 x x
1. Measured at 10% of rated current, 25ºC.
2. Measured at rated voltage.
©2008 Littelfuse, Inc.
Specifications are subject to change without notice. Please refer to www.littelfuse.com for the most current information
Amp
Code
Max
Voltage
Rating
(V)
Interrupting
Rating
50A @32 V AC/DC
35A @32 V AC/DC
Nominal Cold
Resistance
(Ohms)
0.3750 0.0030 x x
0.0540 0.0320 x x
31
Revision: February 13, 2008
Nominal
Melting
2
t (A2sec)
I
Agency Approvals
434 Series
Surface Mount Fuses
Thin Film > 0603 Size > Very Fast Acting > 434 Series
Temperature Rerating Curve
Average Time Current Curves
1A
.75A
.5A
.375A
.25A
100
10
1
TIME IN SECONDS
0.1
0.01
0.001
0.1
.68A
1
CURRENT IN AMPERES
1.5A
3A
2.5A
2A
3.5A4A5A
10 100
Soldering Parameters - Wave Soldering
Reflow Condition Pb – Free assembly
- Temperature Min (T
Pre Heat
- Temperature Max (T
- Time (Min to Max) (ts) 60 – 180 secs
Average ramp up rate (Liquidus Temp (T
) to peak
L
to TL - Ramp-up Rate 5°C/second max
T
S(max)
Reflow
- Temperature (T
- Temperature (tL) 60 – 150 seconds
L
Peak Temperature (TP) 250
Time within 5°C of actual peak Temperature (t
)
p
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (T
Do not exceed 260°C
) 150°C
s(min)
) 200°C
s(max)
5°C/second max
) (Liquidus) 217°C
+0/-5
20 – 40 seconds
) 8 minutes Max.
P
°C
434 Series
32
Revision: February 13, 2008
©2008 Littelfuse, Inc.
Please refer to www.littelfuse.com for the most current information
Specifications are subject to change without notice.
Loading...
+ 1 hidden pages