
POLY-FUSE® Resettable PTCs
Surface Mount > 2920L Series
2920L Series
Agency Approvals
AGENCY AGENCY FILE NUMBER
E183209
R50119118
RoHS
Description
The 2920L Series PTC provides surface mount overcurrent
protection for medium voltage (≤60V) applications where
resettable protection is desired.
Features
• RoHS compliant, lead-free
and halogen-free
• High voltage
• Low-prole
• Fast response to fault
currents
Applications
• IEE1394 port protection
• Powered ethernet port
• Low voltage telecom
equipment protection
protection (IEEE 802.3 af)
• Automotive electronic
control module protection
Electrical Characteristics
Maximum Time
Part Number Marking
I
hold
(A)
I
V
(A)
trip
(Vdc)
max
I
max
(A)
P d
typ.
(W)
To Trip
Current
(A)
Time
(Sec.)
2920L030 LF030 0.30 0.60 60 10 1.50 1.50 3.00 1.200 3.000 4.800
2920L050 LF050 0.50 1. 00 60 10 1.50 2.50 4.00 0.350 0.870 1.400
2920L075 LF075 0.75 1.50 30 40 1.50 8.00 0.30 0.350 0.670 1.000
2920L075/60 LF075-60 0.75 1.50 60 10 1.50 8.00 0.30 0.300 0.60 0.950
2920L100 LF100 1. 10 2.20 33 40 1.50 8.00 0.50 0.120 0.270 0.410
2920L125 LF125 1.25 2.50 15 40 1.50 8.00 2.00 0.070 0.160 0.250
2920L150 LF150 1.50 3.00 33 40 1.50 8.00 2.00 0.080 0.150 0.230
2920L185 LF185 1.85 3.70 33 40 1.50 8.00 2.50 0.050 0.110 0.150
2920L200 LF200 2.00 4.00 15 40 1.50 8.00 5.00 0.050 0.090 0.125
2920L200/24 LF200-24 2.00 4.00 24 40 1.50 8.00 5.00 0.050 0.090 0.125
2920L250 LF250 2.50 5.00 15 40 1.50 8.00 10.00 0.035 0.060 0.085
2920L260 LF260 2.60 5.00 6 40 1.50 8.00 10.00 0.025 0.050 0.075
2920L300 LF300 3.00 5.00 6 40 1.50 8.00 20.00 0.015 0.033 0.048
2920L300/15 LF300-15 3.00 5.00 15 40 1.50 8.00 20.00 0.015 0.033 0.048
2920L500/16 LF500-16 5.00 10.00 16 40 2.0 20.00 5.00 0.005 - 0.025
I
= Hold current: maximum current device will pass without tripping in 20°C still air.
hold
= Trip current: minimum current at which the device will trip in 20°C still air.
I
trip
= Maximum voltage device can withstand without damage at rated current (I max)
V
max
= Maximum fault current device can withstand without damage at rated voltage (V
I
max
= Power dissipated from device when in the tripped state at 20°C still air.
P
d
= Minimum resistance of device in initial (un-soldered) state.
R
min
= Typical resistance of device in initial (un-soldered) state.
R
typ
= Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
R
1max
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
)
max
R
min
(Ω)
Resistance
R
typ
(Ω)
Agency
Approvals
R
1max
(Ω)
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
X X
Specifications are subject to change without notice.
© 2013 Littelfuse, Inc.
Revised: 11/12/13

POLY-FUSE® Resettable PTCs
250S
0.10
1
10
100
1000
0.1 110 100
Current in Amperes
Time in Seconds
0.13A
Surface Mount > 2920L Series
Temperature Rerating
Ambient Operation Temperature
-40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C
Part Number
2920L030 0.45 0.40 0.35 0.30 0.25 0.23 0.20 0.17 0.14
2920L050 0.76 0.67 0.59 0.50 0.42 0.38 0.33 0.29 0.23
2920L075 1. 1 3 1. 01 0.88 0.75 0.62 0.56 0.50 0.44 0.34
2920L075/60 1. 1 3 1. 01 0.88 0.75 0.62 0.56 0.50 0.44 0.34
2920L100 1.66 1.47 1.29 1. 10 0.91 0.83 0.73 0.64 0.50
2920L125 1.89 1.68 1.46 1.25 1.04 0.94 0.83 0.73 0.56
2920L150 2.27 2.01 1. 76 1.50 1.25 1. 13 1. 00 0.87 0.74
2920L185 2.80 2.47 2.17 1.85 1.54 1.39 1.22 1.07 0.85
2920L200 3.02 2.68 2.34 2.00 1.66 1.50 1.32 1. 1 6 0.90
2920L200/24 3.14 2.77 2.42 2.00 1.73 1.56 1.38 1.20 0.98
2920L250 3.78 3.35 2.93 2.50 2.08 1.88 1.65 1.45 1. 13
2920L260 3.64 3.25 2.91 2.60 2.26 2.08 1.95 1. 74 1.48
2920L300 4.53 4.02 3.51 3.00 2.52 2.26 1.99 1.75 1.34
2920L300/15 4.20 3.85 3.44 3.00 2.69 2.50 2.31 2.12 1.83
2920L500/16 6.85 6.25 5.65 5.00 4.25 3.88 3.50 2.80 2.25
Notes: The temperature rerating data is only for reference, please contact Littelfuse technical support for detail temperature rerating information.
Hold Current (A)
2920L Series
Average Time Current Curves
0.30A
0.50A
0.75A & 0.75A/60
1.00A
1.25A
1.50A
1000
100
10
Time in Seconds
1
Temperature Rerating Curve
170%
150%
130%
1.85A
2.00A/24V
2.50A
2.60A
3.00A/15V
2920L
110%
90%
70%
50%
Percentage of Rated Current
30%
10%
-40 -30 -20 -10010 20 30 40 50 60 70 80 85
Temperature (°C)
0.10
0.1 110 100
Current in Amperes
The average time current curves and Temperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/12/13

POLY-FUSE® Resettable PTCs
Surface Mount > 2920L Series
Soldering Parameters
Condition Reflow
Peak Temp/ Duration Time 260°C / 10 Sec
Time above liquids (TAL) 220°C 60 Sec ~ 100 Sec
Preheat 120°C~ 180°C 50 Sec ~ 150 Sec
Storage Condition 0°C~35°C,
• Recommended reow methods: IR, vapor phase oven, hot air
oven, N
environment for lead–free
2
• Recommended maximum paste thickness is 0.25mm (0.010 inch)
• Devices can be cleaned using standard industry methods and
solvents.
Note: If reow temperatures exceed the recommended prole,
devices may not meet the performance requirements.
<
70%RH
=
260
220
180
120
Temperature (°C)
Preheating
0
50 to 150
Soldering Cooling
60 to 100
Time(s)
120
Physical Specifications
Terminal Material
Lead Solderability
Solder-Plated Copper (Solder Material:
Matte Tin(Sn))
Meets EIA Specication RS186-9E, ANSI/
J-STD-002 Category 3.
Environmental Specifications
Operating/Storage
Temperature
Maximum Device Surface
Temperature in Tripped
State
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance MIL–STD–202, Method 215
Vibration
Moisture Sensitivity Level Level 1, J–STD–020C
-40°C to +85°C
125°C
+85°C, 1000 hours
-/+5% typical resistance change
+85°C, 85%,R.H.,1000 hours
-/+5% typical resistance change
MIL-STD-20 2, Method 107G
+85°C/-40°C 20 times
-30% typical resistance change
MIL–STD–883C, Method 2007.1,
Condition A
Specifications are subject to change without notice.
© 2013 Littelfuse, Inc.
Revised: 11/12/13

POLY-FUSE® Resettable PTCs
C
Top
View
Pad
Layout
Side
View
Bottom
View
5.30 mm
(.209”)
4.60 mm
(.181”)
2.0mm
(.079”)
D
MARKING CODE VARIES
WITH AMPERAGE AND VOLTAGE RATING
(SEE ELECTRICAL CHARACTERISTIC TABLE)
SHOWN ARE:
- 1.5A/33V RATING (LEFT)
- 2.0A/24V RATING (RIGHT)
E
A
B
150
150
200
-24
Surface Mount > 2920L Series
Dimensions (mm)
2920L Series
Part
Number
A
Inches mm Inches mm Inches mm Inches mm Inches mm
Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Min
B C D E
2920L030 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L050 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L075 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L075/60 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.05 0.06 1.20 1.80 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L100 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L125 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L150 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L185 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L200 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L200/24 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L250 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L260 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L300 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L300/15 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2
2920L500/16 0.26 0.31 6.73 7.98 0.19 0.21 4.80 5.44 0.80 1.60 0.80 1.60 0.012 0.098 0.30 2.50 0. 010 0.079 0.25 2.00
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/12/13

POLY-FUSE® Resettable PTCs
PACKAGING STYLE
SIZE
L: LITTELFUSE SURFACE MOUNT PPTC
I
HOLD
HOLD CURRENT CODE
(Refer to Electrical Characteristics Table)
/XX: SPECIAL VOLTAGE RATING
(Not applicable to all parts. Refer
to Electrical Characteristics Table)
QUANTITY CODE: K=10,000 Y=4,000 W=3,000 P=2,000
R: Tape & Reel
SERIES
2920 L 380 /12 TH Y R
THIN PROFILE
(Not applicable to all parts)
Surface Mount > 2920L Series
Part Ordering Number System
Packaging
Part Number Ordering Number
Halogen
Free
I
(A)
hold
2920L030 2920L030DR Ye s 0.30 030 Tape and Reel 1500 DR
2920L050 2920L050DR Ye s 0.50 050 Tape and Reel 1500 DR
2920L075 2920L075DR Ye s 0.75 075 Tape and Reel 1500 DR
2920L075/60 2920L075/60MR Ye s 0.75 075 /60 Tape and Reel 1000 MR
2920L100 2920L100PR Yes 1. 10 10 0 Tape and Reel 2000 PR
2920L125 2920L125PR Ye s 1.25 125 Tape and Reel 2000 PR
2920L150 2920L150DR Ye s 1.50 15 0 Tape and Reel 1500 DR
2920L185 2920L185DR Ye s 1.85 185 Tape and Reel 15 00 DR
2920L200 2920L200DR Ye s 2.00 200 Tape and Reel 15 00 DR
2920L200/24 2920L200/24DR Yes 2.00 200 /24 Tape and Reel 1500 DR
2920L250 2920L250DR Ye s 2.50 250 Tape and Reel 1500 DR
2920L260 2920L260PR Ye s 2.60 260 Tape and Reel 2000 PR
2920L300 2920L300DR Ye s 3.00 300 Tape and Reel 15 00 DR
2920L300/15 2920L300/15DR Ye s 3.00 300 /15 Tape and Reel 1500 DR
2920L500/16 2920L500/16MR Ye s 5.00 500 Tape and Reel 1,000 MR
I
hold
Code
Voltage
Option
Packaging
Option
Quantity
Quantity &
Packaging Codes
Specifications are subject to change without notice.
© 2013 Littelfuse, Inc.
Revised: 11/12/13

POLY-FUSE® Resettable PTCs
Surface Mount > 2920L Series
Tape and Reel Specifications
TAPE SPECIFICATIONS: EIA-481-1 (mm)
2920L030,
2920L050,
2920L075
2920L100,
2920L125,
2920L260
2920L200, 2920L250,
2920L200/24,
2920L300,
2920L075/60
2920L500/16
2920L300/15
W 16.0+/- 0.30 16.0+/- 0.30 16.0+/- 0.30 16.0+/- 0.30 H 16.0+/- 0.2
F 7.5+/- 0.05 7.5+/- 0.05 7.5+/- 0.05 7.5+/- 0.10 W 17.0+/- 0.2
2920L150, 2920L185,
E
1
D
0
D
1
P
0
P
1
P
2
A
0
B
0
1.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 D Ø 60.2+/−0.5
1.55+/- 0.05 1.55+/- 0.05 1.55+/- 0.05 1.50+/- 0.10 F Ø 13.0+/- 0.5
1.5+/- 0.10 1.5+/- 0.10 1.5+/- 0.10 1.5 (min) C Ø 178+/- 1.0
4.0+/- 0.10 4.0+/- 0.10 4.0+/- 0.10 4.0+/- 0.10 H
8.0+/- 0.10 8.0+/- 0.10 8.0+/- 0.10 8.0+/- 0.10 W
2.0+/- 0.05 2.0+/- 0.05 2.0+/- 0.05 2.0+/- 0.10 W
5.45+/- 0.10 5.45+/- 0.10 5.45+/- 0.10 5.45+/- 0.10
7.65+/- 0.10 7.65+/- 0.10 7.65+/- 0.10 7.90+/- 0.10
T 0.25+/- 0.10 0.25+/- 0.10 0.25+/- 0.10 0.30+/- 0.05
K
O
1.25+/- 0.10 1.00+/- 0.10 1.45+/- 0.10 2.00+/- 0.10
Leader min. 390 390 390 390
Trailer min. 160 160 16 0 160
REEL DIMENSIONS:
EIA-481-1 (mm)
1
1
2
W
3
11+/- 0.5
2.5+0.5
3.0+0.5
4.0+0.5
2920L Series
Tape and Reel Diagram
P
1
T
A
0
P
D
P
0
0
2
E
1
H
W2
H
W1
1
D
C
F
W
W3
D
2
K
0
B
0
W
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/12/13