Lithonia Lighting WDGE1 LED, WDGE2 LED, WDGE3 LED, WDGE4 LED User manual

WDGE1 LED

Architectural Wall Sconce

Catalog
Number

Notes

Buy American

Type

Hit the Tab key or mouse over the page to see all interactive elements.

Introduction

The WDGE LED family is designed to meet
specifier’s every wall-mounted lighting need in
a widely accepted shape that blends with any
architecture. The clean rectilinear design comes
in four sizes with lumen packages ranging from
1,200 to 25,000 lumens, providing true site-wide
solution.

WDGE1 delivers up to 2,000 lumens with a soft,
non-pixelated light source, creating a visually
comfortable environment. The compact size of
WDGE1, with its integrated emergency battery

Specifications

Depth (D1): 5.5"

Depth (D2): 1.5"

Height: 8"

Width: 9"

Weight:

(without options)

9 lbs

W

D2

H

D1

backup option, makes it an ideal over-the-door
wall-mounted lighting solution.

WDGE LED Family Overview

Luminaire Standard EM, 0°C Cold EM, -20°C Sensor

WDGE1 LED 4W -- -- 1,200 2,000 -- -- -- --

WDGE2 LED 10W 18W Standalone / nLight 1,200 2,000 3,000 4,500 6,000 --

WDGE3 LED 15W 18W Standalone / nLight 7,500 8,500 10,000 12,000 -- --

WDGE4 LED -- -- Standalone / nLight 12,000 16,000 18,000 20,000 22,000 25,000

P1 P2 P3 P4 P5 P6

Lumens (4000K)

Ordering Information

Series Package Color Temperature CRI Distribution Voltage Mounting

WDGE1 LED P1

P2

Options Finish

3

Emergenc y battery bac kup, Certified in C A Title 20 MAEDBS (4W, 0°C min)

E4WH

4

PE

Photocell, Button Type

DS Dual switching ( come s with 2 drivers and 2 lig ht engines; see page 3 f or details)
DMG 0-10V dimming wires pul led outside fix ture (for use with an e xternal control, or dered separately)
BCE Bot tom conduit entry f or back box (PBBW). Total of 4 entr y points.

Accessories

Ordered and shipped separately.

WDGEAWS DDBXD U WDGE 3/8inch Architectural Wall Spacer (specify nish)

WDGE1PBBW DDBXD U WDGE1 surface -mounted back box (specify nish)

27K 2700K
30K 3000K
35K 3500 K
40K 4000K
50K 15000K

80CRI
90CRI

VF Visual comfort forward throw
VW Visual comfort wide

EXAMPLE: WDGE1 LED P2 40K 80CRI VF MVOLT SRM PE DDBXD

MVO LT

2

347

DDBXD Dark bronze
DBLXD Black
DNAXD Natur al aluminum
DWHXD Whi te
DSSXD Sandstone

Shipped included

SRM Surface mounting bracket
ICW Indirect Canopy/Ceiling Washer bracket (dry/damp locations only)

Shipped separately

AWS 3/8inch Architectural wall spacer
PBBW Surface-mounted back box (top, left, right conduit entry) Use when

NOTES

1 50K not available in 90CRI.
2 347V not available with

3 E4WH not available with

there is no junction box available.

DDBTXD Textured dark bronze
DBLBXD Textured black
DNATXD Texture d natural aluminum
DWHGXD Textured white
DSSTXD Textured sandstone

E4WH, DS or PE.

PE or DS.

5

4 PE not available with DS.
5 Not qualified for DLC. Not

available with E4WH.

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2019-2021 Acuity Brands Lighting, Inc. All rights reserved.

WDGE1 LED

Rev. 03/17/21

Performance Data

Lumen Output

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown,
within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here.

Performance

Package

P1 10W

P2 15W

System

Watts

Dist. Type

VF 1,120 112 0 0 0 1,161 116 0 0 0 1,194 119 0 0 0 1,227 123 0 0 0 1,235 123 0 0 0

VW 1,122 112 0 0 0 1,163 116 0 0 0 1,196 120 0 0 0 1,229 123 0 0 0 1,237 124 0 0 0

VF 1,806 120 1 0 0 1,872 125 1 0 0 1,925 128 1 0 0 1,978 132 1 0 0 1,992 133 1 0 0

VW 1,809 120 1 0 0 1,876 125 1 0 0 1,929 128 1 0 0 1,982 132 1 0 0 1,996 133 1 0 0

27K (2700K, 80 CRI) 30K (3000K, 80 CRI) 35K (3500K, 80 CRI) 40K (4000K, 80 CRI) 50K (5000K , 80 CRI)

Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G

Electrical Load

Performance

Package

P1

P2

System Watts

120V 208V 240V 277V 347V

10W 0.082 0.049 0.043 0.038 --

13W -- -- -- -- 0.046

15W 0.132 0.081 0.072 0.064 --

18W -- -- -- -- 0.056

Current (A)

Lumen Ambient Temperature (LAT) Multipliers

Use these factors to determine relative lumen output for average ambient
temperatures from 0-40°C (32-104°F).

Ambient Lumen Multiplier

0°C 32°F 1.03

10°C 50°F 1.02

20°C 68°F 1.01

25°C 77°F 1.00

30°C 86°F 0.99

40°C 104°F 0.98

Lumen Multiplier for 90CRI

CCT Multiplier

27K 0.845

30K 0.867

35K 0.845

Lumen Output in Emergency
Mode (4000K, 80 CRI)

Option Dist. Type Lumens

E4WH

VF 646

VW 647

40K 0.885

50K 0.898

Projected LED Lumen Maintenance

Data references the extrapolated performance projections for the platforms noted in a 25°C
ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per
IESNA TM-21-11).

To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of
operating hours below. For other lumen maintenance values, contact factory.

Operating Hours

Lumen Maintenance Factor

0 25,000 50,000 100,000

1.0 >0.96 >0.95 >0.91

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2019-2021 Acuity Brands Lighting, Inc. All rights reserved.

WDGE1 LED

Rev. 03/17/21

1.0 fc avg.

8'

15'

26'

0.1 fc min.

Photometric Diagrams

LEGEND

0.25 fc

0.5 fc

1.0 fc

3.0 fc

MH = 8ft
Grid = 8ft x 8ft

WDGE1 LED P2 40K 80CRI VWWDGE1 LED P2 40K 80CRI VW

To see complete photometric reports or download .ies files for this product, visit the Lithonia Lighting WDGE LED homepage.
Tested in accordance with IESNA LM-79 and LM-80 standards.

WDGE1 LED P2 40K 80CRI VFWDGE1 LED P2 40K 80CRI VF

Emergency Egress Options

Emergency Battery Backup

The emergency battery backup is integral to the luminaire — no external housing required! This design provides reliable emergency operation while
maintaining the aesthetics of the product. All emergency battery backup configurations include an independent secondary driver with an integral relay to
immediately detect loss of normal power and automatically energize the luminaire. The emergency battery will power the luminaire for a minimum duration
of 90 minutes (maximum duration of three hours) from the time normal power is lost and maintain a minimum of 60% of the light output at the end of
90minutes.

Applicable codes: NFPA 70/NEC – section 700.16, NFPA 101 Life Safety Code Section 7.9

The example below shows illuminance of 1 fc average and 0.1 fc minimum in emergency mode with E4WH and VF distribution.

8' MH

Grid = 10ft x 10ft

WDGE1 LED xx 40K 80CRI VF MVOLT E4WH

Dual Switching (DS) Option

The dual switching option offers operational redundancy that certain codes require. With this option the luminaire comes integrated with two drivers and
two light engines. These work completely independent to each other so that a failure of any individual component does not cause the whole luminaire to
go dark. This option is typically used with a back generator or inverter providing emergency power.

Applicable codes: NFPA 70/NEC – section 700.16, NFPA 101 Life Safety Code Section 7.9

Driver1 Driver2

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2019-2021 Acuity Brands Lighting, Inc. All rights reserved.

WDGE1 LED

Rev. 03/17/21

Mounting, Options & Accessories

E4WH – 4W Emergency Battery Backup

D = 5.5"

H = 8"

W = 9"

AWS – 3/8inch Architectural Wall Spacer

D = 0.38"

H = 4.4"

W = 7.5"

PBBW – Surface-Mounted Back Box
Use when there is no junction box available.

D = 1.75"

H = 8"

W = 9"

FEATURES & SPECIFICATIONS

INTENDED USE

Common architectural look, with clean rectilinear shape, of the WDGE LED was designed to
blend with any type of construction, whether it be tilt-up, frame or brick. Applications include
commercial offices, warehouses, hospitals, schools, malls, restaurants, and other commercial
buildings.

CONSTRUCTION

The single-piece die-cast aluminum housing integrates secondary heat sinks to optimize
thermal transfer from the internal light engine heat sinks and promote long life. The driver
is mounted in direct contact with the casting for a low operating temperature and long life.
The die-cast door frame is fully gasketed with a one-piece solid silicone gasket to keep out
moisture and dust, providing an IP66 rating for the luminaire.

FINISH

Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset
powder coat finish that provides superior resistance to corrosion and weathering. A tightly
controlled multi-stage process ensures a 3 mils thickness for a finish that can withstand
extreme climate changes without cracking or peeling. Standard Super Durable colors
include dark bronze, black, natural aluminum, sandstone and white. Available in textured
and non-textured finishes.

OPTICS

Well crafted reflector optics allow the light engine to be recessed within the luminaire,
providing visual comfort, superior distribution, uniformity, and spacing in wall-mount
applications. The WDGE LED has zero uplight and qualifies as a Nighttime Friendly™
product, meaning it is consistent with the LEED® and Green Globes™ criteria for
eliminating wasteful uplight.

ELECTRICAL

Light engine consists of high-efficacy LEDs mounted to metal-core circuit boards to
maximize heat dissipation and promote long life (up to L91/100,000 hours at 25°C). The
electronic driver has a power factor of >90%, THD <20%. Luminaire comes with built in
6kV surge protection, which meets a minimum Category C low exposure (per ANSI/IEEE
C62.41.2).

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2019-2021 Acuity Brands Lighting, Inc. All rights reserved.

INSTALLATION

A universal mounting plate with integral mounting support arms allows the fixture to
hinge down for easy access while making wiring connections. The 3/8” Architectural Wall
Spacer (AWS) can be used to create a floating appearance or to accommodate small
imperfections in the wall surface. The ICW option can be used to mount the luminaire
inverted for indirect lighting in dry and damp locations. Design can withstand up to a 1.5 G
vibration load rating per ANSI C136.31.

LISTINGS

CSA certified to U.S. and Canadian standards. Luminaire is IP66 rated. PIR options are
rated for wet location. Rated for -40°C minimum ambient. DesignLights Consortium
Premium qualified product and DLC qualified product. Not all versions of this product may
be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List
at www.designlights.org/QPL to confirm which versions are qualified. International Dark­Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this
page utilizing 2700K and 3000K color temperature only and SRM mounting only.

BUY AMERICAN

This product is assembled in the USA and meets the Buy America(n) government procurement
requirements under FARS, DFARS and DOT. Please refer to www.acuitybrands.com/resources/buy-

american for additional information.

WARRANTY

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

®

(DLC)

WDGE1 LED

Rev. 03/17/21