INTENDED USE —The adjusta ble LED iGimbal down lighting module is 8 0% more efficient th an incan-
descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero
maintenan ce. The LED iGimba l is intended f or sloped ceili ng applicat ions, grazin g texture d surface s, wall
washing, an d highlighting ar twork or oth er architect ural features . Retrofits into m ost existin g recessed
downlighting installations or new construction and remodel applications.
CONSTRUCTION — Spun steel gimbal reflectors with 360° of rotation and at least 50° of adjustable
tilt in both direc tions. Driver affixed to a static yoke to allow max imization of LED ligh t engine rotation
and pivot movements.
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumination, e quivalent to 65W inca ndescent flood lamp. Wide flood be am angle at >90°. Utilizes 2700K ,
3000K and 4000K color temperature LEDs. CRI – 90+. The LED module maintains at least 70% light
output for 35,000 hours.
ELECTRICAL — Pr imary power d isconnec t provided fo r simple connec tion to a dedi cated LED conne ctor
in the housing. Dimming down to 15%.
INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter
and splice k it ships stand ard. This enable s easy install ation or perman ent conversion t o an LED source for
Title 24 compl iance. Trim retention i s achieved by util izing two side -mounted tor sion springs to e nsure a
consistently tight fit with the ceiling and easy installation.
LISTINGS — ETL cer tified to US and Canadi an safety standards. FCC Cer tified. ENERGY STAR® cer tified;
Califor nia T24 compliant. Damp lo cation listed.
WARRANTY — 5-ye ar limited warrant y. Complete warran ty terms locate d at
Note: Act ual performa nce may differ as a resul t of end-user envir onment and applic ation.
All values ar e design or typic al values, measure d under laborator y conditions at 2 5 °C.
Specifications subject to change without notice.
Type
5iG
IC/Non-IC
Retrofit iGimbal
A
M
B
L
M
I
E
D
Specifications
Aperture: 3-1/2 (8.9)
Ceiling opening: as rough-in
Height: 5-1/16 (12.8)
5-1/16 (12.8)
Overlap trim: 6-5/16 (16.0)
3-1/2 (8.9)
3-13/16 (9.7)
All dimensions are inches (centimeters) unless otherwise indicated.
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
5iGLED
Series/FinishLampCCT/CRI/W/Lumens
5iG5" iGimbal
module
MW Matte white
MBMatte black
LED27K 90CRI 2700K/92CRI/11.9W/720L
BNBrush nic kel
ORB Oil-rubbed
bronze
1
Accessories: Order as separate catalog num ber.
TSA5Makes non-bracket housings compatible with LED module
(blank) 120 VL5LED T24IC rated, ne w constructio n rough-in
LED base
3
L5RLED T24IC rated, remod el rough-in LED bas e
L5IC rated, ne w constructio n rough-in
L5RIC rated, re model rough-in
Notes
1 Minimum 9 0-day lead t ime for non-s tandard colo r finishes; mini mum
50-pi ece order quan tity.
2 Total system delivered lumens.
3 90 day lead t ime for 400 0k color tempe rature. Minim um 50 piece orde r qty.
4 Must be or dered on a sep arate line.
4
4
DOWNLIGHTING 5iGLED iGIMBAL
Page 2
5iG 5" LED iGimbal Module
PHOTOMETRICS
5iGMW LED, 2700 K LEDs, input wat ts: 11.8, delivered lumens: 726, LM/W=62, test no. LTL28991P1, tested in accordance with IESNA LM 79-80.
180°
90°
CP Summary
300
600
900
1200
1500
1800
0° 20°
80°
60°
40°
15°
25°
35°
45°
55°
65°
75°
85°
0°
5°
90
0°90
1938
1668
844
383
139
14
6
2
1
0
0
1938
1755
937
428
156
18
6
2
1
0
0
°09°0°0°0
Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for
a Single Luminaire
5iGMW LED, 3000 K LEDs, input watts: 11.8, delivered lumens: 763, LM/W=65, test no. LTL28991, tested in accordance with IESNA LM 79-80.
EMI/RFIFCC Title 47 CFR, Part 15, Class BFCC Title 47 CFR, Part 15, Class BFCC Title 47 CFR, Part 15, Class B
Min. Power Factor0.900.900.90
Input current0.10A0.10A0.10A
*Values at non-dimming line voltage.
COMPATIBLE DIMMER SWITCHES
ManufacturerModel/SeriesPart NumbersType
Sensor SwitchnLight
Pass & SeymourHarmonyHCL453PTCCCV63-Way 450W LED and CFL
LevitonSure Slide™ Decora
Lutron
SkylarkSELV-300P 300W Electronic Low Voltage
Nova TNTELV-300P300W Elec tronic Low Voltage
nSP5 PCD 2W2-Way 575W Incandescent
nSP5 PCD ELV 120475W Electronic Low Voltage
6633-P3-Way 600W Incandescent
6615-P3-Way 300W Incandescent
When installing the LED Modules on a run with a dimmer, please use the following rule of thumb when determining the
number of fixtures controlled by a single dimmer:
• Figure that each LED fixture represents a 65 Watt load
• Divide the maximum load of the dimmer by 65 watt fixture load. (round down to the nearest whole number).
Example:
Dimmer max load=600 watts
LED fixture load=65 watts
600 watts/65 watts per fixture=9 fixtures per run