Lithonia Lighting KBMF1316 Specification

Catalog
Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE — Ideal for applications where steel housings or metal lamp heads are a requirement.

CONSTRUCTION — 18-gauge steel housing finished in instrument tan color.

Hinged faceplate for easy maintenance.

OPTICS — Glass sealed-beam PAR36 lamps in thermoplastic housing, available in incandesent and halogen

lamp types.

ELECTRICAL — Dual-voltage input capability (120/277V).

AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from
deep discharge.

BATTERY: Batteries are sealed, maintenance-free, lead-acid (SLA) with wattage capacities for 90 minutes
of emergency operation. 16-watts (ELT16), 24-watts (ELT24), 36-watts (ELT36) and 50-watts (ELT50).

Current limiting charger maximizes battery life and minimizes energy consumption.

Thermal protection senses circuitry temperature and adjust charge current to prevent overheating and
charger failure.

Thermal compensation adjusts charger output to provide optimum charge voltage relative to ambient
temperature.

Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery.

LISTINGS

— UL listed. Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination

standards.

WARRANTY — 3-yea r limited warrant y. Complete warrant y terms located a t:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual pe rformance may d iffer as a result of end -user environme nt and applicatio n.

Specifications subject to change without notice.

Type

Industrial Steel Emergency Lighting

ELT16, ELT24, ELT36, ELT50

Standard Lead-acid (SLA) Battery

Optional Nickel-Cadmium

ORDERING INFORMATION

For shortest lead times, configure product using standard options (shown in bold)

Series Input voltage Housing color Lamp heads Lamp type Options

ELT16 16W/6V
ELT24 24W/6V
ELT36 36W/6V
ELT50 50W/12V

(blank) 120V/277V (blank) Instrument tan

W White

(blank) Two heads
RO Less lamp heads
MT Metal lamp heads

PAR36 Halogen
H 8W Halogen PAR36 lamp

PAR36 sealed-beam
6 Volts
H1206 12W/6V halogen
12 Volts
N2512 25W/12V incandescent

(blank) None

1,2

LD Load disconnect switch
TD Integral time delay
N Nickel-cadmium battery
AM Ammeter
VM Voltmeter
NOM NOM Certified
T20C California Title 20 Compliance

H1212 12W/12V halogen

NOTES:

1. When ordering H lamp type with ELT16, ELT24, ELT36 will be 8W6V halogen lamp.

2. When ordering H lamp type with ELT50 will be 8W12V halogen lamp.

3. ELT50 uses larger housing when ordered with these options
(see ELT-125-180-275 spec sheet for larger housing dimensions).

Accessories: Order as separate catalog number.

ELA WG2 Small wireguard (16-50W)

ELA MSTS Mounting shelf (standard color instrument tan)

8

9

4. Available on ELT50 only.

5. N is not available with ELT36.

6. AM and VM must be ordered together.

7. See T20C compliant product list. Only available with ELT16 and ELT36 (8W6V
incandescent lamps).

8. See spec sheet ELA-WG.

9. See spec sheet ELA-RTLP-MS-VS2.

Example: ELT16 H

3,4

5

3,6

3,6

7

EMERGENCY ELT16243650

ELT16/ELT24/ELT36/ELT50 Industrial Steel Emergency Lighting

1

SPECIFICATIONS MOUNTING

ELECTRICAL

Primary Circuit

AC Input Output Volts Watts Ouput

1

Type Volts Amps Watts 1-1/2 hrs. 2 hrs. 3 hrs. 4 hrs.

ELT16 120 .163 16.6 6 16 12 8 6

277 .069 16.4

ELT24 120 .167 20 6 24 24 16 12

277 .072 20

ELT36 120 .172 17.8 6 36 27 18 13.5

277 .075 18

ELT50 120 .287 30 12 50 37 25 18

277 .108 30

BATTERY

Sealed Lead-acid (SLA)

Voltage Typical shelf life 1Typical life

ELT16
ELT24
ELT36
ELT50

6
6
6

12

12 mos. 5-8 yrs. none 600-900F

1

Maintenance3Temperature range

BATTERY

Nickel-Cadmium

Voltage Typical shelf life 1Typical life

ELT16
ELT24
ELT50

6
6

12

3 yrs. 10 yrs. none 320-1000F

1

Maintenance3Temperature range

Shipping weight:
ELT16 - 12.8 lbs. (5.8 kgs.)
ELT24 - 12.8 lbs. (5.8 kgs.)
ELT36 - 17.3 lbs. (7.8 kgs.)
ELT50 - 17.3 lbs. (7.8 kgs.)
ELT50 - (large housing) 30.5 lbs. (13.8 kgs.)*

* For ELT50 (large housing) dimensions, reference spec sheet#: ELT125-180-275

7-7/8

7-7/8
(20.0)

(20.0)

4

4-3/4
(12.1)

4

3-7/8

(9.8)

Housing Back

5-3/4
(14.6)

11-5/8

(29.5)

(25.4)

14

1

(25.4)

NOTES
1 Watts to 87.5% of nominal voltage.
2 At 77°F (25°C).
3 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and tested

in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required
maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

4 Optimum ambient temperature range where unit will provide rated capacity for 90 minutes. Higher and lower

temperatures affect life and capacity.

ELT16243650

EMERGENCY One Lithonia Way Conyers, GA 30012 Phone: [phone] [e-mail] www.lithonia.com © 2000-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/09/18