Lithonia I-BEAM IBE User Manual

IBE L48 LUMINAIRE

IBE L24 LUMINAIRE

FEATURES & SPECIFICATIONS

11.33

INTENDED USE — Ideal one-for-one replacement of conventional lighting systems such as HID
and uores cent. For use in lig ht Industrial a pplications s uch as, warehous ing and other large i ndoor
spaces with mounting heights ranging from 10' – permitted. Certain airborne contaminants

can diminish integrity of acrylic and LED's. Click here for Acrylic Environmental

Compatibility table for suitable uses.

Certain airborne contaminants may adversely aect the functioning of LEDs and
other electronic components, depending on various factors such as concentrations of
the contaminants, ventilation, and temperature at the end-user location. Click here

for a list of substances that may not be suitable for interaction with LEDs and other
electronic components.

CONSTRUCTION — Solid aluminum channel enables superior thermal performance at warm

ambient temperatures.
Optional te xtured semi- diuse, acrylic l ens (ATC) provides gl are control and LED prote ction.
ELECTRICAL — 70 % lumen maintenance at >100,000 hour s. Thermally pr otected dri ver standard

with 0-10V dimming, 6k V/3kA surge protec tion is stand ard on MVOLT. 10kV/5kA surge pr otection is
standar d on HVOLT. Optional 10kV/5kA available on MVOLT. Surge pro tection is te sted in accord ance
with IEEE/ANSI standards.

Luminaire su rge protection lev el: Desigined to with st and up to 6kV/3kA per ANSI C82.77-5-2015.
Lumniaire su rge protection leve l: Designed to with st and up to 10kV/5kA per ANSI C82.77-5-2015.
LSXR Sensor option provides increased energy savings.
INSTALLATION — Suitable for suspension by chain, cable, surface-mounting bracket, hook

monopoint or single (pendant) monopoint. Surface mounting not recommended. 2" oset
mounting can be accomplished with the optional THUN mounting bracket. To maintain ambient
listing, xture should be mounted at a minimum plenum height of 18".

LISTINGS — UL listed. Damp location listed. Listed for use in ambient operating temperatures
from -40°C to 45°C. Thermal management system allows for safe operation during times when
temperatu res rise to 55°C*.

DesignLights Consortium® (DLC) Premium qualied product. Not all versions of this product may
be DLC Premium qu alied. Please chec k the DLC Qualied Produc ts List at www.designlights.org/

QPL to conrm wh ich versions are quali ed.

BUY AMERICAN — Produc t with the BAA opti on is assembled in the USA and m eets the
Buy America(n) government procurement requirements under FAR, DFARS and DOT.
Please ref er to www.acuitybrands.com/buy-americ an for additional information.

WARRANTY — 5-ye ar limited warrant y. Complete warr anty terms locate d at:

www.acuitybrands.com/support/customer-support/terms-and-conditions

Note: Ac tual performanc e may dier as a result of end -user environment and a pplication.
All values are d esign or typical v alues, measured under la boratory condit ions at 25 °C.
Specications subject to change without notice.

1.75

3.26

Catalog
Number

Notes

Type

LED High Bay

IBEAM® IBE

12,000 through 30,000 Lumens

Buy American

A - 7/8" KNOCK OUT

21.93

10.97

3.21

1.81

IBE L24 LUMINAIRE

A - 7/8" KNOCK OUT

22.00

18.86

22.05

A

4.27

3.21

1.81

A

A

HUB (IMLPMHB) OPTION

IBLPMP OPTION

WGIBE OPTION

5.23

IBE L48 LUMINAIRE

4.00

14.83

15.49

40.90

44.00

A A

1.84

2.47

4.21

6.30

4.36

14.83

Fixture utilizing back pack

A A

*Prolon ged use at 55°C may im pact long- term perfo rmance.

1.84

2.21

2.56

4.21

43.97

8.21

A

42.50

41.00

INDUSTRIAL IBE

4.30

Page 1 of 5

IBE LED High Bay

Looking for Contractor Select readily available
congurations? Click here to visit Contractor Select™
spec sheet or go to www.contractorselect.com

ORDERING INFORMATION

Lead times will vary depending on options selected. Consult with your sales representative.

Example: IBE L24 18000LM ATC MD MVOLT GZ10 40K 80CRI DWH

IBE MD GZ10

Series Fixture length Lumens Lens Distribution Voltage Driver Color temperature

IBE L ED bay light L24 24 "

L48 48"

12000LM 12,000 lumens
15000LM 15,000 lumens
18000LM 18,000 lumens
22000LM 22,000 lumens

18000LM 18,000 lumens
22000LM 22,000 lumens
30000LM 30,000 lumens

ATC Acr ylic

1

1

L/LENS Less lens
SD080 Semi-Diuse

Textured semi­diuse l ens,
.040" thick

acryl ic, .080"
thick

2

MD Me dium
ND Narrow

MVO LT 120 -277 V
HVO LT 347 V-480V
120 120V
208 20 8V
240 240V
277 277V
347 347V
480 48 0V

4

4

3

GZ10 0 -10V

dimming

40K 4000 K
50K 5000 K

Color rendering index Options Finish

80CRI 80 CR I E15WCP EM self-diag nostics bat tery pack, 5°C mi n., 15W, Certie d in CA Title 20 MAEDBS

BPK Fixtu re back pack
OUTCTR Wiring lead s pulled through ba ck center of xtur e (not available with bac k pack)
SPD Surge protection device
OCS RELOC® OnePass® 5' installed

6

7

RRL RELOC®-ready luminaire. See page 5 for ordering information (must be ordered

separately)

IMP Integra ted modular plug (not ava ilable with 347V or 48 0V)

7,8

WGX Standard wire guard, installed
BAA B uy America(n) Act Compl iant
Cord sets:
CS1W 6' white cor d with straight-b lade plug, 120V
CS3W 6' white cord wit h twist-lock plu g, 120V
CS7W 6' whi te cord with strai ght-blade plug, 277V
CS 11W 6' white cord w ith twist-loc k plug, 277V
CS25W 6' white cord with t wist-lock plug, 3 47V
CS97W 6' white cord w ith twist-loc k plug, 480V
CS93W 6' white cord, 6 00V SEOOW, no plug (no voltage r equired)

9,10

9,10

9,10

9,10

9,10

9,10

9

5,7

Motion sensors:
LCOZU Aisle motion sensor, pre-wired
LCHOSZU Aisle motion sensor, pre-wired;

LCPZU Aisle motion sensor with photo-

LAOZU 360° motion sensor, pre-wired
LAHOSZU 360° motion sensor, pre-wired;

LAPZU 360° motion sensor with photo-

LAM0SZU 360 motion sensor, dimming and

LCM0SZU Aisle motion sensor, dimming and

7,11

programmable dimming

cell; pre wired

programmable dimming

cell, pre-wired

switching photocell, pre-wired
(T24 compliant)

switching photocell, pre-wired
(T24 compliant)

DWH Gloss white

Accessori es: Order as separate catalog numbe r.

Mounting:
IBA C120 M100 Aircraf t cable 10' with hoo k (one pair)
IBAC 240 M75 Aircraf t cable 20' with ho ok (one pair)
IBHMP Hook monopoint
ZACVH Aircraf t 10' V hanger (one pair)
IBLPMP Pendant mon opoint splice box, in cludes side cover s (not availab le with xture s

utilizin g back pack when ord ered with 347, 480 & HVOLT)

IBLPMPHB Pendant mon opoint splice box wi th 3/4" hub, include s side covers (not availab le

with x tures utilizin g back pack when ord ered with 347, 480 & HVOLT)

12

12

Wire guards:
WGIBE Wire guard for use with L24 xtures
WGIBE4 Wire guard for use with L48 xtures

Cord sets for IMP option:
CS1WIMP Straight plug, 120V
CS3WIMP Twist-lock, 120V
CS7WIMP Straight plug, 277V
CS11WIMP Twist-lock, 277V
CS93WIMP 600V SO white cord, no plug

9,14

(no voltage required)

HC36 Hanger chain, 36" (one pair)
THUN Tong hanger bra cket (order 2 per xt ure)

Notes

1 Not available with OUTCTR option.
2 Visible pixilation is present when choosing L/LENS option. Not

recommended for applications where direct viewing of high intensity

LED’s will be unacceptable.
3 Ships standard with surge protection.
4 Utilize s xture ba ckpack. 300 00LM only f or use in ambien t

tempera tures up to 35°C. N ot available wi th IMP option o r cord with

plug options.
5 Utilizes PS1555CP. Not available wi th 347 or 480. Req uires BPK opti on.
6 Ships st andard on HVOLT, 347, 480V, and E15WCP and all Mo tion

sensors. Should not be added to the description.

13

7 Must spe cify volt age.
8 Must be f actory in stalled. Mus t have “IMP” pow er cord to power

xtur e. Cordsets m ay be ordered wi th xture o r as accessor y. Not
availabl e with E15WCP option .
Fixtu re and cord set s hip separate ly. Example:
Ordere d as:
IBE L48 1800 0LM ATC MD 120 GZ10 40K 80CRI C S1WIMP DWH
Ships as:
IBE L48 1800 0LM ATC MD MVOLT GZ10 40K 80CR I IMP DWH
CS1WIMP

9 All cord se ts are 18/3, 6', white. Addi tional lengt hs available 10', 15' and

20'. (ex. CS1WL10)

10 Cord se ts are volta ge specic. Sp ecify vol tage. Other c onguratio ns

availabl e. Consult fac tory. Batt ery not availa ble on cord set s with

plugs.
11 Ot her congurations available, see page four for additional options.
12 Addi tional supp ort cables r equired whe n used with L48 .
13 For u se in applicat ions with amb ient tempera tures up to 35°C fo r

12000LM - 2 2000LM x tures, 30°C fo r 30000LM  xtures. No t for use

on xtu res with E15WCP.
14 Fix tures must h ave IMP option.

IBE

INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: [phone]-SERV (7378) [e-mail] www.lithonia.com © 2018-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/05/21

Page 2 of 5