Lithonia DSX2 LED User Manual

Specifications

EPA:

Length:

Width:

Height 1:

Height 2:
(max):

Weight: 36lbs

1.1 ft

(0.10 m2)

40”

(101.6 cm)

15”

(38.1 cm)

7-1/4”

(18.4 cm)

3.5”

Catalog

D-Series Size 2

LED Area Luminaire

Number

Notes

Type

Hit the Tab key or mouse over the page to see all interactive elements.

Introduction

The modern styling of the D-Series is striking
yet unobtrusive - making a bold, progressive

2

W

L

H

H2

statement even as it blends seamlessly with its
environment.

The D-Series distills the benefits of the latest in
LED technology into a high performance, high
efficacy, long-life luminaire. The outstanding
photometric performance results in sites with
excellent uniformity, greater pole spacing and
lower power density. The Size 2 is ideal for
replacing 400-1000W metal halide in area lighting
applications with energy savings of up to 80%
and expected service life of over 100,000 hours.

Ordering Information

EXAMPLE: DSX2 LED P7 40K T3M MVOLT SPA NLTAIR2 PIRHN DDBXD

DSX2 LED

Series LEDs Color temperature Distribution Voltage Mounting

DSX2 LED Forward optics

P1 P5
P2 P6
P3 P7
P4 P8

Rotated optics

2

P10

P13

P11 2P14

2

P12

30K 3000 K

1

40K 4000 K
50K 5000 K

1

1

T1S Type I Short

(Automotive)

T2S Type II Short
T2M Type II Medium
T3S Type III Short
T3M Type III Medium

1, 2

1, 2

T4M Type IV Medium
TFTM Forward Throw

T5VS Type V Very Short
T5S Type V Short
T5M Type V Medium
T5W Type V Wide
BLC Backlight control
LCCO Left corner cutoff
RCCO Right corner cutoff

3

3

3

3

4

4

4

Medium

5

MVOLT
XVO LT

(277V- 480V)

9

120

9

208

9

240

9

277

9

347

9

480

Shipped included

SPA Square pole mounting

6,7, 8

RPA Round pole mounting
WBA Wall bracket

10

3

SPUMBA Square pole universal mounting adaptor
RPUMBA Round pole universal mounting adaptor

Shipped separately

KMA8 DDBXD U Mast arm mounting bracket adaptor (specify finish)

Control options Other options Finish (required)

Shipped installed

NLTAIR2 nLight AIR generation 2 enabled
PIRHN Network, Bi-Level motion/ambient sensor

13

14

PER NEMA twist-lock receptacle only (no controls)
PER5 Five-wire receptacle only (no controls)
PER7 Seven-wire receptacle only (no controls)
DMG 0-10V dimming extend out back of housing for

external control (no controls)

DS Dual switching

18,19

15,16

15,16

17

PIRH Bi-level, motion/ambient sensor, 15-30’ mounting

PIRH1FC3V High/low, motion/ambient sensor, 15-30’ mount-

15

FAO Field Adjustable Output

height, ambient sensor enable at 5fc

ing height, ambient sensor enabled at 1fc

23

Shipped installed

20

20

HS House-side shield
SF Single fuse (120, 277, 347V)
DF Double fuse (208, 240, 480V)
L90 Left rotated optics
R90 Right rotated optics
HA 50°C ambient operations

22

2

2

1

Shipped separately

BS Bird spikes

21

DDBXD Dark bronze
DBLXD Black

9

DNAXD Natur al aluminum

9

DWHXD White
DDBTXD Textured dark bronze
DBLBXD Tex tured black
DNATXD Textured natural aluminum
DWHGXD Textured white

EGS External glare shield

11

11

10

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2011-2021 Acuity Brands Lighting, Inc. All rights reserved.

DSX2-LED

Rev. 02/17/21

Page 1 of 8

Ordering Information

Accessories

Ordered and shipped separately.

DLL127F 1.5 JU Photocell - SSL twist-lock (120-277V)
DLL347F 1.5 C UL JU Photocell - SSL twist-lock (347V)
DLL480 F 1.5 CUL JU Photocell - SSL twist-lock (480V)
DSHORT SBK U Shorting cap

DSX2HS 80C U House -side shield for 80 LED unit

DSX2HS 90C U House -side shield for 90 LED unit
DSX2HS 100C U House-side shield for 100 LED unit

PUMBA DDBXD U*

KMA8 DDBXD U

DSX2EGS (FINISH) U External glare shield

For more control options, visit DTL and ROAM online.

24

Square and round pole universal
mounting bracket (specify finish)

Mast arm mounting bracket adaptor

12

(specify finish)

24

24

22

22

22

25

Options

EGS - External Glare Shield

NOTES

1 HA not available with P5, P7, P8, P13, and P14.
2 P10, P11, P12, P13 or P14 and rotated optics (L90, R90) only available together.

24

3 Any Type 5 distribution with photocell, is not available with WBA.
4 Not available with HS.
5 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz).
6 XVOLT is only suitable for use with P5, P6, P7, P8, P13 and P14.
7 XVOLT works with any voltage between 277V and 480V.
8 XVOLT not available with fusing (SF or DF) and not available with PIRH or PIRH1FC3V.
9 Single fuse (SF) requires 120V, 277V or 347V. Double fuse (DF) requires 208V, 240V or 480V.
10 Suitable for mounting to round poles between 3.5” and 12” diameter.
11 Universal mounting bracket intended for retrofit on existing pre-drilled poles only. 1.5 G vibration load rating per ANCI C136.31. Only usable when pole’s drill

pattern is NOT Lithonia template #8.
12 Must order fixture with SPA option.Must be ordered as a separate accessory; see Accessories information. For use with 2-3/8” diameter mast arm (not included).
13 Must be ordered with PIRHN. Sensor cover only available in dark bronze, black, white or natural aluminum color.
14 Must be ordered with NLTAIR2. For more information on nLight Air 2 visit this link.
15 Photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories. Not available with DS option. Shorting Cap included.
16 If ROAM® node required, it must be ordered and shipped as a separate line item from Acuity Brands Controls. Node with integral dimming. .
17 DMG not available with PIRHN, PER5, PER7, PIR, PIRH, PIR1FC3V or PIRH1FC3V, FAO.
18 Requires (2) separately switched circuits with isolated neutrals.
19 Provides 50/50 fixture operation via (2) independent drivers. Not available with PER, PER5, PER7, PIR or PIRH. Not available with P1, P2, P10.
20 Reference Controls Options table settings table on page 4. Reference Motion Sensor Default table on page 4 to see functionality.
21 Reference controls options table on page 4.
22 Not available with BLC, LCCO and RCCO distribution. Also available as a separate accessories; see Accessories information.
23 Must be ordered with fixture for factory pre-drilling.
24 Requires luminaire to be specified with PER, PER5 and PER7 option. Ordered and shipped as a separate line item from Acuity Brands Controls.
25 For retrofit use only. Only usable when pole’s drill pattern is NOT Lithonia template #8.

.50

14.1019.05

4.25

Drilling

Template #8

HANDHOLE ORIENTATION

C

D

A

Handhole

Top of Pole

1.325”

2.650”

Tenon Mounting Slipfitter

Tenon O.D. Mounting Single Unit 2 @ 180 2 @ 90 3 @ 90 3 @120 4 @ 90

2-3/8" RPA AS3-5 190 AS3-5 280 AS3-5 290 AS3-5 390 AS3-5 320 AS3-5 490

2-7/8" RPA AST25-190 AST25-280 AST25-290 AST25-390 AST25-320 AST25-490

4" RPA AST35-190 AST35-280 AST35-290 AST35-390 AST35-320 AST35-490

B

Mounting Option Drilling Template Single 2 @ 180 2 @ 90 3 @ 90 3 @ 120 4 @ 90
Head Location Side B Side B & D Side B & C Side B, C & D Round Pole Only Side A, B, C & D
Drill Nomenclature #8 DM19AS DM28AS DM29AS DM39AS DM32AS DM49AS

DSX2 Area Luminaire - EPA

*Includes luminaire and integral mounting arm. Other tenons, arms, brackets or other accessories are not included in this EPA data.

0.563”

0.400”
(2 PLCS)

Fixture Quantity & Mounting

Configuration

Mounting Type

DSX2 LED 1.100 2.200 2.120 3.300 2.850 4.064

Drilling Template Minimum Acceptable Outside Pole Dimension

SPA #8 2-7/8" 2-7/8" 3.5" 3.5" 3” 3.5”
RPA #8 2-7/8" 2-7/8" 3.5" 3.5" 3” 3.5”
SPUMBA #5 2-7/8" 3" 4" 4" 3.5” 4”
RPUMBA #5 2-7/8” 3.5” 5 ” 5 ” 3.5” 5”

Single DM19 2 @ 180 DM28 2 @ 90 DM29 3 @ 90 DM39 3 @ 120 DM32 4 @ 90 DM49

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2011-2021 Acuity Brands Lighting, Inc. All rights reserved.

DSX2-LED

Rev. 02/17/21

Page 2 of 8

Photometric Diagrams

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s D-Series Area Size 2 homepage.

Isofootcandle plots for the DSX2 LED 80C 1000 40K. Distances are in units of mounting height (30’).

LEGEND

0.1 fc

0.5 fc

1.0 fc

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

4321

T1ST1S

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22425P1 tested in accordance

with IESNA LM-79-08.

4321

T2MT2M

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22428P1 tested in accordance

with IESNA LM-79-08.

4321

T2ST2S

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22434P1 tested in accordance

with IESNA LM-79-08.

4321

T3MT3M

Test No. LTL22425P1 tested in accordance

with IESNA LM-79-08.

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

4321

T3ST3S

4321

T5ST5S

4321

LCCOLCCO

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22430P1 tested in accordance

with IESNA LM-79-08.

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22425P1 tested in accordance

with IESNA LM-79-08.

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

Test No. LTL22425P1 tested in accordance

with IESNA LM-79-08.

T4MT4M

T5MT5M

RCCORCCO

4321

Test No. LTL22434P1 tested in accordance

4321

Test No. LTL22434P1 tested in accordance

4321

Test No. LTL22434P1 tested in accordance

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

with IESNA LM-79-08.

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

with IESNA LM-79-08.

with IESNA LM-79-08.

TFTMTFTM

T5WT5W

4321

Test No. LTL22428P1 tested in accordance

4321

Test No. LTL22428P1 tested in accordance

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

with IESNA LM-79-08.

4 3 2 1 0

4

3

2

1

0

-1

-2

-3

-4

with IESNA LM-79-08.

4321

T5VST5VS

4321

BLCBLC

Test No. LTL22430P1 tested in accordance

with IESNA LM-79-08.

Test No. LTL22430P1 tested in accordance

with IESNA LM-79-08.

COMMERCIAL OUTDOOR

One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com

© 2011-2021 Acuity Brands Lighting, Inc. All rights reserved.

DSX2-LED

Rev. 02/17/21

Page 3 of 8