Litheli U1GT21112 Operator's Manual

Operator's Manual

Keep this manual for the safety warnings and precautions, assembly,

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

40V BATTERY POWERED

GRASS TRIMMER 2 IN 1

U1GT21112

Visit our website at: http://www.litheli.com

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please contact us: WWW.LITHELI.COM.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Litheli.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Table of Contents

Safety Speciﬁcations

Setup Operation

.........................................................

..........................................................

.................................................

.............................................

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential

2 5

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Maintenance Parts List and Diagram Warranty

will result in death or serious injury.

..................................................

..............................

..........................................................

12 14 16

IMPORTANT SAFETY INSTRUCTIONS

When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS

Gardening Appliance Safety

1. Avoid Dangerous Environment - Do not use appliances in damp or wet locations.

2. Do Not Use In Rain.

3. Keep Children Away - All visitors should

be kept at a distance from work area..

Do not wear loose

4. Dress Properly -

clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.

Wear ANSI-approved safety goggles, hard hat and heavy-duty rubber work gloves.

Use face or dust mask if operation is dusty.

7. Use Right Appliance - Do not use appliance for any job except that for which it is intended.

8. Avoid Unintentional Starting - Do not carry appliance with ﬁnger on switch.

9. Don’t grasp the exposed cutting blades or cutting edges when picking up or holding the appliance

10. Do Not Force Appliance -

It will do the job better and with less likelihood of injury at the rate for which it was designed.

11. Do not Overreach - Keep proper footing and balance at all times.

Watch what you are doing. Use

12. Stay Alert -

common sense. Do not operate appliance when you are tired.

Page 2 WWW.LITHELI.COM Item U1GT21112

Wear thick jeans and steel-toed work boots to help prevent injury caused by flying debris.

13. Store Idle Appliances Indoors - When not in use, appliances should be stored indoors in dry, and high or locked-up place - out of reach of children.

Keep cutting

14. Maintain Appliance With Care - edge sharp and clean for best performance and to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.

Before further use of the

15 . Check Damaged Parts -

appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by a qualiﬁed technician unless indicated elsewhere in this manual.

16. Keep guards in place and in working order..

17 . Keep hands and feet away from cutting area..

18 . Wear full eye protection and protective clothing..

19. If electrolyte contacts the skin, wash it off immediately with water.

20. If electrolyte contacts the eyes, ﬂush thoroughly and immediately with water. Seek medical attention.

21 . Stop working when you feel tired or exhausted.

Make regular breaks to rest..

22. People with pacemakers should consult their physician(s) before use. Electromagnetic ﬁelds in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

23. When servicing use only identical replacement

parts.

24. Disconnect Appliance - Remove Battery Pack when not in use, before servicing, when changing accessories such as blades, and the like.

25. Carefully follow cutting procedures explained in this manual. They are speciﬁcally planned to reduce risk to the operator..

26. Only replace the line on this appliance with

the line material and diameter of line listed

on the Speciﬁcations table. Other materials, such as wire, rope, or blades can damage the

appliance and be forcefully and dangerously ejected from the appliance upon breaking.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE ALARGEAMOUNTOFENERGY AND WILL VENT FIRE OR EXPLODE IF MISTREATED:

1 . Keep

Battery Pack dry.

2. DO NOT DO ANY OF THE FOLLOWING

TO THE BATTERYPACK:

a. Open, b. Drop, c. Short-circuit,

Battery Charger Safety

1 . SAVE THESE INSTRUCTIONS - This manual

contains important safety and operating instruction for battery charger Model U1GT21112.

2. Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product using battery..

d. Puncture, e. Incinerate, f. Expose to temperatures greater than 104°F.

3. Charge Battery Pack only according

to its Charger’s instructions..

4. Inspect Battery Pack before every use; do not use or charge if damaged..

6. Remove or disconnect battery after use, before servicing, cleaning or removing material from the gardening appliance..

7. Do not dispose of battery in a ﬁre. The cell may explode. Check with local codes for possible disposal instructions.

3. CAUTION - To reduce risk of injury, charge only li-ion type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

4. Do not charge or use appliance in rain, or in wet locations.

5. Do not use battery-operated appliance in rain.

Item U1GT21112

WWW.LITHELI.COM

8. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

9. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys.. The battery or conductor may overheat and cause burns..

Page 3

Vibration Hazard

This appliance vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1 . Anyone using vibrating appliances regularly or for

an extended period should ﬁrst be examined by a doctor and then have regular medical checkups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this appliance. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue ﬁngers), seek medical advice as soon as possible.

General Safety

1 . The spool will continue to rotate for a few

seconds after use. Allow it to stop completely and remove Battery Pack before putting the appliance down, making any adjustments, or servicing the appliance.

2. Do not use in rain, snow, sprinklers, or wet grass.. Do not rinse off the Trimmer..

3. Use only during daylight hours..

4. Carefully inspect the spool housing and guard before inserting Battery Pack in the Trimmer. Do not use Trimmer if any part is cracked or damaged.

2. Do not smoke during use.. Nicotine reduces the blood supply to the hands and ﬁngers, increasing the risk of vibration-related injury..

3. Wear suitable gloves to reduce the vibration effects on the user.

4. Use appliances with the lowest vibration when there is a choice between different processes.

5. Include vibration-free periods each day of work.

6. Grip appliance as lightly as possible (while still keeping safe control of it). Let the appliance do the work.

7. To reduce vibration, maintain the appliance as explained in this manual. If any abnormal vibration occurs, stop use immediately.

5. Do not use appliance for other than intended use.

6. Maintain labels and nameplates on the appliance. These carry important safety information. If unreadable or missing, contact Litheli for a replacement.

7. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Page 4

WWW.LITHELI.COM

Item U1GT21112

Specifications

Charger Input Rating

Charger Output Rating

Battery Rating

Battery Type

Cutting Swath

Cutting Blade Diameter

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECTGROUNDING:

Check with a qualiﬁed electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not ﬁt the outlet, have a proper outlet installed by a qualiﬁed electrician.

ExtensionCords

NOTE:

Extension cords must not be used with this item’s Charger..

120VAC / 60Hz

36VDC / 3.3A

40VDC / 2.5Ah / 90Wh

40V Litheli Li-Ion

350mm (13.7 in)

255mm (10 in)

Symbology

Double Insulated

n0 xxxx/min.

Volts

Alternating Current

Amperes

No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields.

Do not throw the batteries in the household waste, ﬁre or water.

Read the manual before set-up and/or use.

WARNING marking concerning Risk of Fire. Do not cover Charger ventilation ducts. Charge on ﬁreproof surface only.

WARNING marking concerning Risk of Electric Shock. Properly connect Charger’s power cord to appropriate outlet.

WARNING marking concerning Risk of Explosion. Do not puncture, short, or open battery packs and do not charge damaged battery packs.

Charge level indication.

Do not expose the battery to sunlight for a long time and do not place it on radiators (max. 45 ° C).

Dispose of the batteries at a collection point for old batteries, from where they are taken to environmentally friendly recycling.

Item U1GT21112

WWW.LITHELI.COM

Charge level indication.

Page 5

Setup - Before use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or this product.

Functions

Trigger

Safety Lock

Speed Control

Button

Buckle

Trigger

Auxiliary

Handle

Guard

Line

Cutter

Lower Aluminium

Pipe

Lock Shaft

Button

Page 6

WWW.LITHELI.COM

Item U1GT21112

Charger Indicators

Battery Indicators

Green

Light

Red Light

• Blinking Green - Ready to charge.

• Solid Red - Charging.

• Solid Green - Charged.

• Blinking Green and Red - Battery

or Charger damaged.

• Solid Green and Red - Battery too hot, charging will begin when Battery has cooled..

Battery

Test

Button

Press Battery Test button to

determine battery charge status.

• All Four Solid Green Lights - Full charge.

• Three Solid Green Lights - 75% charge.

• Two Solid Green Lights - 50% charge.

• One Solid Green Light - 25% charge.

• One Blinking Green Light - Charge Battery.

Page 7WWW.LITHELI.COMItem U1GT21112

Assembly Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release Trigger of the appliance before performing any procedure in this section.

NOTE :

For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

Unfolding the Handle

1. Unfold the handle (A of Figure 1).

2. Install the connector knob to secure the handle (B of Figure 1).

NOTE: The nut that holds the handle connector knob in place is lightly secured in the connector housing with a piece of tape. Remove the tape after you install the connector knob.

Figure1

Page 8

WWW.LITHELI.COM

Item U1GT21112

Installing the Auxiliary Handle

The round hole of the rubber sleeve is aligned

1. with the cylinder of the auxiliary handle for assembly (Figure 2).

Figure2

Place the assembled rubber sleeve on the upper aluminum tube and align the cylinder of the auxiliary handle with the spacing hole of the aluminum tube for assembly. (The long side of the auxiliary handle faces the trimmer head (left) (Figure 3).)

Figure4

Installing the Guard

Figure3

Place the “top cover of the auxiliary handle” on the “lower cover of the auxiliary handle”, press the screw into the screw port and tighten the screw with the Allen Key (Figure 4).

Align the screw holes of the shield with the nuts of the brushless motor assembly, insert the inner hexalobular socket pan head self-tapping screws and ﬁx it with a screwdriver (Figure 4).

Remove the 4 Phillips head screws that are taped to the guard and use them to install the guard (Figure 5).

Figure5

Item U1GT21112

WWW.LITHELI.COM

Page 9

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY:

Before operating the gardening appliance, put on ANSI-approved safety goggles, closed-toe work boots, long pants, and other safety gear. Safety goggles and other safety gear need to be purchased

by yourself.

TO PREVENT SERIOUS INJURY AND PROPERTY DAMAGE:

Inspect the area before using the String Trimmer. Remove all hard objects from work area. Use both hands when operating Trimmer.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Make sure that the Power Switch/Trigger is in the off-position and remove Battery Pack before setting up the appliance.

Charging Battery Pack

1 . Place Battery Charger on a dry, ﬂat,

ﬁreproof surface indoors.

NOTE: Allow battery to cool completely before charging.

Do not charge a cracked,

2. Examine Battery Pack.

open, or leaking Battery Pack, or charge a

non-recommended type of Battery Pack.

3. Battery Pack is designed to ﬁt this Charger speciﬁcally. If Battery Pack does not ﬁt Charger properly, do not try to insert it. Do

not force Battery Pack into the Charger.

4. Plug Charger into a grounded, 120VAC, 60Hz receptacle. Green LED will blink, showing that power is supplied to the charger.

Slide Battery Pack onto Charger. Red LED

5. will light continuously while charging.

NOTE: A fully discharged Battery Pack will

While charging, Battery Pack and

NOTE:

Charger may become warm to the touch and the Charger′s fan may come on. This is normal.

6. Green LED will light continuously when

7. Allow Battery Pack to cool completely before

take about 1 hour to fully charge.

Battery Pack is charged. Unplug Charger and remove Battery Pack when ﬁnished.

use.

Page 10

WWW.LITHELI.COM

Item U1GT21112

Appropriate Temperature Ranges

Charge the battery at 0°C (32°F) to 40°C (104°F)*

Use products at

Store products at -15°C (5°F) to 60°C (140°F)

Unplug the charger if

Charging time will increase if you do not charge the battery within this range.

Store the tool, battery pack, and battery charger in an enclosed clean, dry area.

-15°C (5°F) to 60°C (140°F)

Below 0°C (32°F) or above 40°C (104°F)

4. To start the trimmer, press the lockout button, then squeeze the variable-speed trigger (Figure 8).

Lockout button

Figure8

Variable-speed trigger

Starting the Trimmer

1. Make sure that the vents on the trimmer are clear of any dust and debris.

Trimmer venting areas

2. Align the cavity in the battery pack with the tongue on the handle housing (Figure 7).

3. Push the battery pack into the handle until the battery pack locks into the latch (Figure 7).

Figure6

Shutting Off the Trimmer

To shut off the trimmer, release the trigger.

Whenever you are not using the trimmer or are transporting the trimmer to or from the work area, remove the battery pack.

Removing the Battery Pack from the Trimmer

Press the battery latch on the machine to release the battery pack and slide the battery pack out of the machine (Figure 9).

Item U1GT21112

Figure7

WWW.LITHELI.COM

Figure9

Page 11

Advancing the Line Using the Bump Feed

1. Run the tool at full throttle.

2. Tap the bump button on the ground to advance the line. The line advances each time the bump button is tapped. Do not hold the bump button on the ground.

Note: The line trimming cut-off blade on the grass deﬂector cuts the line to the correct length.

Note: If the line is worn too short, you may not be able to advance the line by tapping it on the ground. If so, release the trigger and refer to Advancing the Line Manually (page 12).

Trimming

Bump button

Figure10

Advancing the Line Manually

Remove the battery pack from the trimmer, then push the bump button at the base of the spool retainer while pulling on the trimmer line to manually advance the line.

Figure11

Page 12

WWW.LITHELI.COM

Item U1GT21112

Operating Tips

Replacing the Spool

• Keep the trimmer tilted toward the area being

cut; this is the best cutting area.

• The string trimmer cuts when you move it from

left to right. This prevents the trimmer from throwing debris at you.

• Use the tip of the string to do the cutting; do not

force the string head into uncut grass.

• Wire and picket fences can cause the string to

wear rapidly and even break. Stone and brick walls, curbs, and wood can also cause the string to wear rapidly.

• Avoid trees and shrubs. The string can easily

damage tree bark, wood moldings, siding, and fence posts.

Direction of rotation

Use only 2 mm (0.08 inch) diameter monoﬁlament string.

Important: Using a larger diameter string causes the motor to overheat and fail.

1. Remove the battery.

2. Push in the tab on the side of the spool retainer (Figure 13).

Tab

Spool Retainer

Line Cutoff Blade

Spool

Slot

Figure13

Figure12

String path

3. Pull the spool retainer up to remove it and remove the spool.

4. To install the new spool, make sure that the string is captured in 1 of the retaining slots on the new spool. Make sure the end of the string extends approximately 150 mm (6 inches).

5. Install the new spool so that the string aligns with the eyelet in the string head. Thread the string into the eyelet.

6. Pull the string extending from the string head so that the string releases from the slot in the spool.

7. Install the spool retainer by pressing the tabs into the slots and pushing down until the spool retainer clicks into place.

Item U1GT21112

WWW.LITHELI.COM

Page 13

Replacing the String

Replacing the Blade

1. Remove the battery.

2. Remove the spool; refer to Replacing the Spool (page 13).

Spool

Anchor Slot

Figure14

Note: Remove any old string remaining on the

spool.

3. Each side of the spool accepts approximately

2.5 m (8 ft) of string. Use only 2 mm (0.08 inch) diameter monoﬁlament string.

Note: Do not use any other gauge or type of string, as this could damage the trimmer.

4. Insert the string into the anchor slot in the

upper part of the spool (Figure 14). Wind the string onto the spool in the direction shown by the arrows on the spool.

1. Press the lock shaft button and turn the spool counterclockwise until it is removed.

2. Take out the brush breaker blade from the accessory package and remove the brush breaker sheath.

3. Insert the blade into the brushless motor assembly, cover the blade pressing plate and cover the blade pressing cover.

4. Put the hexagon check nut and use a four-way socket wrench to tighten it clockwise.

Remove the protective cover

5. Place the string in the slot on the upper spool ﬂange, leaving about 150 mm (6 inches) extended beyond the slot.

Note: Do not overﬁll. After winding the string, there should be at least 6 mm (1/4 inch) between the wound string and the outside edge of the spool.

6. Replace the spool and the spool retainer; refer to Replacing the Spool (page 13).

Figure15

Page 14

WWW.LITHELI.COM

Item U1GT21112

User-Maintenance and Storage

Procedures not specifically explained in this manual must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK: Release the Trigger and remove the Battery Pack before performing any inspection, maintenance, or cleaning procedures.

TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1 . BEFORE EACH USE,

inspect the general condition of the appliance. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• cracked or broken parts,

• damaged electrical wiring,

• any other condition that may affect its safe operation.

CAUTION

The line cutoff blade on the deflector is sharp and can cut you.

Do not use your hands to clean the deflector shield and blade.

2. AFTER USE,

Remove Battery Pack and wipe external surfaces of the appliance with clean cloth.

3. Li-Ion BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. Do not short, incinerate or open battery.

4. Store Battery Pack, Charger, and tool in dry, indoor area out of reach of children and away from metal objects (i.e., paperclips, coins) to prevent shorting.

5. All parts are permanently lubricated. Do not use additional lubrication.

6. Wipe or scrape clean the cutting head area any time there is an accumulation of debris.

7. Check and tighten all fasteners. If any part is damaged or lost, repair or replace it.

8. Brush debris away from air intake vents and exhaust on motor housing to prevent the motor from overheating.

Troubleshooting

Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualiﬁed specialist if you cannot solve the problem yourself.

Item U1GT21112

WWW.LITHELI.COM

Page 15

Problem

Possible Cause Corrective Action

The tool does not start.

The tool does not reach full power.

The tool is producing excessive vibration or noise.

The battery pack loses charge quickly. 1. The battery pack is over or under the

The battery charger is not working.

1. The battery is not fully installed in the tool.

2. The battery pack is not charged.

3. The battery pack is damaged. 3. Replace the battery pack.

4. There is another electrical problem with the tool.

1. The battery pack charge capacity is too low.

2. The air vents are blocked.

1. There is debris on the drum area on the trimmer.

2. The spool is not properly wound.

appropriate temperature range.

1. The battery charger is over or under the appropriate temperature range.

2. The outlet that the battery charger is plugged into does not have power.

1. Remove and then replace the battery into the tool, making sure that it is fully installed and latched.

2. Remove the battery pack from the tool and charge it.

4. Contact an Authorized Service Dealer.

1. Remove the battery pack from the tool and fully charge the battery pack.

2. Clean the air vents.

1. Clean any debris off of the drum area.

2. Advance the line using the bump feed and/or remove the line on the spool and wind the spool again.

1. Move the battery pack to a place where it is dry and the temperature is between 0°C (32°F) and 40°C (104°F).

1. Unplug the battery charger and move it to a place where it is dry and the temperature is between 0°C (32°F) and 40°C (104°F).

2. Contact your licensed electrician to repair the outlet.

The battery pack shows only 3 LED indicators after only a few seconds of using a fully charged battery.

All 4 LED indicators are blinking on the battery pack after you press the battery-charge-indicator button on the battery pack and the current charge displays (when the battery pack is not in use).

All 4 LED indicators are blinking on the battery pack after releasing the trigger (when the battery pack is in use).

2 LED indicators are blinking on the battery pack after you press the battery-charge-indicator button on the battery pack and the current charge displays (when the battery pack is not in use).

2 LED indicators are blinking on the battery pack after releasing the trigger (when the battery pack is in use).

1 LED indicator is blinking on the battery pack.

An audible tone sounds when advancing the line using the bump feed.

1. This is a normal occurrence.

1. The battery pack is over or under the appropriate temperature range.

1. There is a difference in voltage between cells in the battery pack.

1. The battery pack voltage is low. 1. Place the battery pack on the charger.

1. This is a normal occurrence.

1. Stop the tool and press the battery-charge-indicator button or the remove the battery from the tool to display the actual battery charge.

1. Move the battery pack to a place where it is dry and the temperature is between 0°C (32°F) and 40°C (104°F).

1. Place the battery on the charger until it is fully charged.

1. Stop the tool by releasing the trigger and then start the tool.

It is difﬁcult to remove the battery pack from the tool.

Page 16

1. The battery pack/tool is new or there is corrosion in the battery terminals and/or the terminals on the tool.

WWW.LITHELI.COM

1. Clean the terminals on the battery pack and the tool. Then apply dielectric grease to the battery terminals; do not use any other type of lubricant as it can damage the terminals.

Item U1GT21112

Parts List and Diagram

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Parts List

Part Description Qty

1 Trimmer Head Cover 1 2 Outlet Hole Block 2 3 Nylon Wire 4 Wire Spool 5 Percussion Head 6 Percussion Outlet Spring 7 Hex Lock Nut 8 Trimmer Head Seat

Inner Plum Countersunk Head

Tapping Screw 10 Windshield Cover 11 Fan Blade 12 Internal Plum Pan Head Screw 13 Windshield 14 Lock Shaft Button 15 Lock Shaft Button Spring 16 E-Axial Snap Ring 17 Brushless Motor Assembly 18 Socket Roundhead Screw 19 Socket Roundhead Screw 20 Spring Washer 21 Shock Absorber Rubber Sleeve 22 Lower Aluminium Pipe 23 Heat Shrink Tube 24 Spring Wire 25 Heat Shrink Tube 26 Air Duct 27 Lower Connector Pipe 28 Hex Lock Nut 29 Connecting Shaft Sleeve 30 Upper Connector Pipe 31 Connector Pipe Knob 32 Rubber Sleeve 33 Wire Sleeve 34 Socket Roundhead Dental Screw 35 Socket Roundhead Dental Screw 36 Under The Auxiliary Handle

1 1

1 1 1 1

1 2 3 2 1 1 3 1 3 1

1 2 1 1 1 1 1 3 1 1

Part Description Qty

37 Hex Lock Nut 4 38 Above The Auxiliary Handle 1 39 Socket Roundhead Dental Screw 4 40 Upper Aluminum Tube 1 41 Bracelet 1 42 Buckle 1 43 Socket Cross Wrench 1 44 Buckle Seat 45 Left Aluminium Tube Bushing 46 Right Aluminium Tube Bushing 47 Cable Platen 48 Internal Conductor 49 Speed-Control Switch Push Button 50 Left Handle 51 Slide Switch 52 Inching Switch 53 Heat Shrink Tube 54 Battery Pack Left Casing 55 Brushless Controller Assembly

Inner Plum Pan Head Tapping

Screw

57 Battery Pack Right Casing 58 Male Insert 59 Insert Holder 60 Right Handle 61 Switch Platen Spring 62 Switch Platen 63 Switch Self-Lock Spring 64 Reverse Self-Lock Switch

Phillips head screws

66 Secant Block 67 Protective Cover 68 Cutting Blade 69 Cutter Blade Sheath 70 Blade Platen 71 Platen Cover

1 1

1 1 1

1 1 1 1 2 1 1

1 1

1 1 1

1 1

172 Battery and Charger

Record Product’s Serial Number Here:

NOTE: If product has no serial number, record month and year of purchase instead..

NOTE: Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

Item U1GT21112

WWW.LITHELI.COM

Page 17

Assembly Diagram

Page 18

WWW.LITHELI.COM

Item U1GT21112

Warranty

90-Day Money Back You May Return Your Product For A Full Refund Within The First 90 Days Of Your Purchase.

3-Year Battery Warranty Against Defects In Workmanship And Materials Battery Must Be Used And Maintained In Accordance With The Directions And Regulations In The Operator's Manual.

5-Year Tool Warranty Against Defects In Materials, Parts Or Workmanship Litheli At Its Own Discretion Will Repair Or Replace Any And All Parts Found To Be Defective All Units Must Be Used And Maintained In Accordance With The Directions And Regulations In The Operator's Manual.

Returning The Product Contact Us At www.litheli.com For The Return Address, We Will Issue Replace/Refund Upon Receiving Your Return.

Need An Extra Copy of The Operator's Manual? Visit www.litheli.com to Download it.

Litheli U1GT21112 Operator's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual