LITE ON TECHNOLOGY WN4515L User Manual

Download

PRODUCT SPECIFICATION

802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module

WN4515L

Realtek RTL8812AU

Version 1.0

User Manual

* This document contains confidential proprietary information and is property of LTC. The contents of

this document should not be disclosed to unauthorized persons without the written consent of LTC

Page 1/13

CONTENT

FCC WARING STATEMENT .......................................................................................................... 3

IC WARING STATEMENT .............................................................................................................. 4

PRODUCT FEATURES .................................................................................................................... 6

PRODUCT SPECIFICATIONS ........................................................................................................ 7

MAIN CHIPSET ....................................................................................................................................... 7

FUNCTIONAL SPECIFICATIONS ............................................................................................................... 7

RECOMMENDED OPERATION CONDITIONS .......................................................................... 9

DC CHARACTERISTICS ................................................................................................................. 9

PIN ASSIGNMENT .......................................................................................................................... 10

CONNECTOR SPEC ....................................................................................................................... 10

MECHANICAL ................................................................................................................................ 11

METAL ANTENNA SPEC .................................................................................................................... 12

EEPROM INFO R MATION ............................................................................................................ 13

ENVIRONMENTAL ........................................................................................................................ 13

OPERATING .......................................................................................................................................... 13

STORAGE .............................................................................................................................................. 13

Page 2/13

WARING STATEMENT

FCC

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Page 3/13

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: PPQ-WN4515L ”

Information for the OEMs and Integrators

The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user.

1) This device is intended for OEM integrators only.

2) Please see the full Grant of Equipment document for other restrictions.

This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5150~5250MHz is prohibit.

This device is slave equipment, the device is not radar detection and not ad-hoc operation in the DFS band.

IC WARING STATEMENT

Canada, avis d'Industry Canada (IC)

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; and (2)This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This device is restricted to indoor use.

Page 4/13

Gain(dBi)

2.4G

PSA

RFMTA401029IMLB701

PIFA

2.60

3.16

PSA

RFMTA401029IMLB701

PIFA

1.89

2.90

PSA

RFMTA401029IMLB701

PIFA

1.75

1.99

PSA

RFMTA401029IMLB701

PIFA

1.71

1.97

PSA

RFMTA401029IMLB701

PIFA

1.72

1.85

PSA

RFMTA401029IMLB701

PIFA

1.62

1.72

PSA

RFMTA100600NNLB002

PIFA

0.52

2.66

Gain(dBi)

2.4G

PSA

RFMTA401029IMLB701

PIFA

2.60

3.16

PSA

RFMTA401029IMLB701

PIFA

1.89

2.90

PSA

RFMTA401029IMLB701

PIFA

1.75

1.99

PSA

RFMTA401029IMLB701

PIFA

1.71

1.97

PSA

RFMTA401029IMLB701

PIFA

1.72

1.85

PSA

RFMTA401029IMLB701

PIFA

1.62

1.72

PSA

RFMTA100600NNLB002

PIFA

0.52

2.66

OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC No. cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization.

End Product Labeling This transmitter module is autho r iz ed only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains transmitter module IC: 4491A-WN4515L”. Contient le module d'émission IC: 4491A-WN4515L

This radio transmitter (4491A-WN4515L) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Ant. Brand Model Type

Le présent émetteur radio (4491A-WN4515L) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

Ant. Brand Model Type

Page 5/13

The transmitter module may not be co-located with any other transmitter or antenna. Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body).

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.

Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (les antennes se situent à moins de 20 cm du corps d'une personne).

RODUCT FEATURES

 Operate at ISM frequency Band (2.4/5GHz)  IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n,and 802.11ac  USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed  Enterprise level security supporting: WEP 64/128, WPA, WPA2, WAPI  Support 2 transmission and 2 receiving, transmission rate can up to 300Mbps

(Physical Ra te) in 8 02.11n; and 866.7Mbps in 802.11ac

 Wi-Fi Direct supports wireless peer to peer applications  RoHS compliance  Low Halogen compliance

Page 6/13

IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE

802.11n; IEEE802.11ac

802.11a:

MCS 0 to 9 for HT80MHz

802.11a:

256QAM, 64QAM, 16QAM, QPSK, BPSK

Ad-hoc mode (Peer-to-Peer) Infrastructure mode

5GHz

14: (Ch. 1-14) – Japan

802.11a/ac

2.400 ~ 2.4835 GHz

Transmit Output Power – (Tolerance: ±1.5dBm)

02.11a:

802.11b:

RODUCT SPECIFICATIONS

MAIN CHIPSET

MAC/ Baseband/ RF: Realtek 8812AU-VS-CG

FUNCTIONAL SPECIFICATIONS

WiFi Function

Standard Bus Interface

Data Rate

Media Access Control

Modulation Techniques

Universal Serial Bus (USB2.0)

54, 48, 36, 24, 18, 12, 9, 6 Mbps

802.11b:

11, 5.5, 2, 1 Mbps

802.11g:

54, 48, 36, 24, 18, 12, 9, 6 Mbps

802.11n:

MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz

802.11ac:

MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz

CSMA/CA with ACK

54, 48, 36, 24, 18, 12, 9, 6 Mbps

802.11b:

CCK, DQPSK, DBPSK

802.11g:

64QAM, 16QAM, QPSK, BPSK

802.11n:

64QAM, 16QAM, QPSK, BPSK

802.11ac:

Network Architecture

Operation Channel

Frequency Range

2x2

12: – United States 19: – Europe

8: – Japan

2.4GHz

11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe

5.15~5.85 GHz

802.11bg

13 dBm@6-54Mbps

Page 7/13

15 dBm@1-11Mbps

11dBm@MCS0-9

802.11a:

-57 dBm@MCS9

WPA, WPA2, WPS, WEP 64/128, IEEE 802.1x, IEEE

802.11i

Mode

Average

Peak

2.4G mA / W

5G mA / W

2.4G mA / W

5G mA / W

420mA /

2.1W

490mA /

2.45W

700mA /

930mA /

270mA /

332mA /

802.11g:

14 dBm@6-54Mbps

802.11n(2.4GHz):

20MHz:

13dBm@MCS0-7

40MHz:

13dBm@MCS0-7

802.11n(5GHz):

20MHz:

12dBm@MCS0-7

40MHz:

12dBm@MCS0-7

802.11ac:

20MHz:

13dBm@MCS0-8

40MHz:

12dBm@MCS0-9

80MHz:

-85 dBm@6Mbps

-70 dBm@54Mbps

802.11b:

-83 dBm@11Mbps

802.11g:

-86 dBm@6Mbps

-70 dBm@54Mbps

802.11n(2.4GHz):

20MHz

-69 dBm@MCS7

40MHz

Receiver Sensitivity

-66 dBm@MCS7

802.11n(5GHz):

20MHz

-69 dBm@MCS7

40MHz

-66 dBm@MCS7

802.11ac:

20MHz

-63 dBm@MCS8

40MHz

-60 dBm@MCS9

80MHz

Security Operating Voltage

OS Supported

Power Consumption

Test Condition:

- Operate at HT40

- File Transmission

5V ±10% I/O supply voltage Microsoft Windows Win7/Win8/Win8.1/Linux

3.5W

Page 8/13

4.65W

1.35W

1.66W

Unassoci ated Idle

22mA /

0.11W

Standby

up mode

20mA /

Antenna Type

@Wake

Metal Antenna on Board

0.1W

ECOMMENDED OPERATION CONDITIONS

For Module

Symbol Rating Min Typ Max Units

VCC 5V Supply Voltage 4.5 5 5.5 V

For IC

Symbol Rating Min Typ Max Units

VDD33 3.3V Supply Voltage 3.0 3.3 3.6 V VDD12 1.2V Supply Voltage 1.10 1.2 1.23 V

CHARACTERISTICS

Symbol Parameter Min Typ Max Units

VOL Output Low Voltage 0 - 0.33 VOH Output High Voltage 2.97 - 3.3 V

Input Low Voltage - 0 0.9 V Input High Voltage 2.0 3.3 3.6 V

Page 9/13

Pin.

Pin Define

Description

Status

+3.3V

3.3V source

YES

USB_D+

USB Data+

YES

WAKE#

Wake up system via wifi, low active

YES

GND

Ground

YES

IN ASSIGNMENT

+3.3V 3.3V source YES

USB_D- USB Data- YES

GND Ground YES

RESET# System reset RTL8812AU, low active YES

ONNECTOR SPEC

Page 10/13

ECHANICAL

Page 11/13

ETAL ANTENNA SPEC

On Board Antenna fo r WiFi (Q’ty:1pcs)

Page 12/13

EEPROM INFORMATION

Reg Domain

US 0x25

Vendor ID Product ID

ENVIRONMENTAL

Operating

Operating Temperature: 0 to 70 °C Relevant Humidity: 5-90% (non-condensing)

Storage

Temperature: -40 to 85 °C (-40 to 185 °F) Relevant Humidity: 5-95% (non-condensing)

0x0BDA 0x881A

Page 13/13

LITE ON TECHNOLOGY WN4515L User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

IC WARING STATEMENT

MAIN CHIPSET

FUNCTIONAL SPECIFICATIONS

EEPROM INFORMATION

ENVIRONMENTAL

Operating

Storage