LITE ON TECHNOLOGY KB24RF001, DG24RF001 Users manual

Setting up your IBM Wireless USB Keyboard & Mouse

The class B digital appartaus meets all requirement of Canadian Interference-Causing Equipment Regulation.

What you will need:

Keyboard Dongle

AAA Batteries

Insert batteries into Mouse and Keyboard.
Do not press the yellow connect buttons.
Mouse optical sensor will light if batteries are placed properly.

Connect Dongle to any USB port on the computer.

Mouse

Palm Rest

AA Batteries

Optional: Attach Keyboard palm rest.

Turn on your computer to begin use. If you purchased your IBM Wireless
Keyboard & Mouse with a IBM computer system, Setup is complete! If you
purchased your Wireless Desktop separately, insert the software application CD
in CD-ROM drive and double click the Setup.exe file to install. Installation is
complete within 10 seconds.

Hot Key ( Customized)

Getting to know the Keyboard and Dongle.

Connect button: used for manual connect in step c below.

LED is on when bind success within ten seconds.

LED is on when data in & send to host.

Keyboard and Mouse not Responding?

Check USB connection. Make sure batteries are inserted proprly
Turn on computer.

Establish connection manually.

1.First press and release the 2.First press and release the yellow connect button on the
yellow connect button on the mouse and then the dongle.
keyboard and then the dongle.