LITE ON TECHNOLOGY ALPINE User Manual
Start Here.
English
Here’s how to use the eX-10
with your iPod
®
and Bluetooth phone.
Ready, set, go.
eX-10 in-car setup is quick and easy. First, place the display on the
dashboard in your fi eld of vision. Then plug the power supply unit into
the cigarette lighter. Finally use the supplied Full Speed cable to connect the eX-10 to your iPod
®
.
1
3
2
2
Set a frequency.
The eX-10 broadcasts audio to your car stereo just like an FM radio station.Tune to an
FM frequency on your radio where there is no radio station reception. Set the same
frequency on the eX-10 from ‘Transmitter’ in thesetup menu. Then, set the type of
audio output required. Access the setup menuand select ‘General’ and then ‘Output
Mode’. Select ‘Transmitter’ or ‘WireTransmitter’ depending on which method you
would like to use. Select ‘Wire Transmitter’ when you use FM switching box.
3
Choose your language.
Access the main menu via the SETUP switch on the remote control
and select ‘General’ and then ‘Language’. Select the language you
want to use for your song information.
4
Listen to your iPod® music.
Use the SEARCH button on your remote control to access your
search options. You can search by songs, artists, albums, playlists,
podcasts, audiobooks, composers and genres. When you fi nd the
song you want, press ENTER and the song will start to play through
your car speakers.
5
See what’s playing.
You can select three display modes by pushing the VIEW button on
your remote. The fi rst is the standard view, which shows the song,
artist and album, and a small picture of the album artwork. The second shows the song name and an enlarged view of the artwork. The
third shows the song, artist and album names with no artwork.
6
Loading...