Listen Technologies RS232 User Manual

DCS 6000

User Manual

Digital Conference System

JB 6002 Junction Box

JB 6004 Junction Box

Danish Interpretation Systems DIS

Danish Interpretation Systems User Manual

Copyright © 2004 Danish Interpretation Systems
No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the

publisher.

Danish Interpretation Systems User Manual

List of Contents

List of Contents .....................................................3

Document version..............................................3

Important...............................................................4

Compliancy ........................................................4

Installation precautions.....................................4

Cleaning..............................................................4

Repacking...........................................................4

Warranty............................................................4

Description of the DCS 6000 system....................5

Features..............................................................5

System components ...........................................6

Central equipment etc......................................6

Interpreter equipment.......................................6

Conference equipment and channel selectors..6

Document version

Operating instructions..........................................7

JB 6002/04 Junction Box .................................. 7

General description.......................................... 7

Features ........................................................... 7

Connectors JB 6002/04 ................................... 7

LED Indications on JB 6004 ........................... 7

System design..................................................7

Standard use of JB 6002/04.............................. 8

Enhanced use of JB 6002/04............................. 9

Appendix.............................................................. 10

Technical appendix.........................................10

Cabling ..........................................................10

Accessories (not supplied)............................. 10

Technical specifications ................................ 10

Printed: 19-11-2004 Version:
Name: JB6000.DOC

Copyright © 2004 Danish Interpretation Systems
No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the

publisher.

Danish Interpretation Systems User Manual

4

Important

Compliancy

The equipment has been tested and found to comply
with the limits of the following standards for digital
devices:

• EN55103-1 (Emission)

• EN55103-2 (Immunity)

• FCC rules part 15, class A (Emission)?

This device complies with part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial or light
industrial environment. The equipment generates,
uses, and can radiate radio frequency energy and if
not installed and used in accordance with the user
manual it may cause harmful interference to radio
communications.

You are cautioned that any changes or
modifications not expressly approved in this manual
could void your authority to operate this equipment.

exposed to direct sunlight, excessive dust or
humidity, mechanical vibration or shock.

To avoid moisture condensations do not install the
unit where the temperature may rise rapidly.

Cleaning

To keep the cabinet in its original condition,
periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use
organic solvents such as thinners or abrasive
cleaners since these will damage the cabinet.

Repacking

Save the original shipping cardboard box and
packing material; they will become handy if you
ever have to ship the unit. For maximum protection,
re-pack the unit as originally packed from the
factory.

Warranty

The individual units in the DCS 6000 system are
minimum covered by 12 months warranty against
defects in materials or workmanship.

Installation precautions

Do not install the unit in a location near heat
sources such as radiators or air ducts, or in a place
.

Manual 01 18 04453

Danish Interpretation Systems User Manual

Description of the DCS 6000 system

Features

The DCS 6000 system has the following main
features:

• Fully digital

• Excellent sound quality

• “State of the Art” fully digital integrated

interpretation, discussion and voting system
offering interpretation, language distribution,
conference microphone and voting facilities
with attendance check with Chip Card ™.

• New, unique digital DATA and AUDIO bus.

• 39 incoming channels (8 floor channels + 31

interpreted channels) and one Line input.

• 33 distributed channels (2 x floor + 31

interpreted channels)

• The Delegate and Interpreter units are powered

and controlled by the CU 6010 Central Unit,
which drives up to app. 200 units on 4 chains.

• EX 6010 Extension Units or PS 6000 Power

Supplies available if more units are required

• A total of 4000 units (delegate and/or

interpreter units) can be connected to the
system.

• Using screened CAT5 or CAT5e cabling (FTP

or STP) ensuring a very cost effective
installation and easy set-up of portable systems

RS232/RS422 connection on CU 6010 for external
operation of the system of a PC or control system
such as AMX or Crestron

The SW 6000 is an optional software package,
which expands the functionality of the DCS 6000
system. The software runs on standard computer
technology (Standard PC with Windows 2000 or
XP).

Main features of the SW 6000 are:

• Microphone management

• Mimic panel operation

• Interpretation management

• Voting management

• Message handling

• Agenda handling

• Data stored on SQL data base for easy

export/import of data as well as easy links to
external databases

• Multi language user interfaces

• Supports different User types with different

priorities, user interfaces and control
possibilities

• Variety of printing facilities such as

speaker’s log, voting results, delegates list
etc.

• Firmware in Delegate units, Interpreter Units,

Central Units etc. upgradeable through serial
PC-connection (RS232 or RS422)

• Can be operated with or without a PC.

• Added functionality and comprehensive

features provided by SW 6000 software
package running on PC

Manual 01 18 04453

5

Danish Interpretation Systems User Manual

6

System components

The CU 6010 Central Unit supports all available
units in the DCS 6000 series:

Central equipment etc.

EX 6010 Extension Unit
PS 6000 Power Supply
AO 6008 Audio Output box
RP 6004 Repeater for four chains
JB 6002 Junction Box with 2 outputs
JB 6004 Junction Box with 4 outputs

Interpreter equipment

IS 6032P Interpreter Set
IS 6132P Interpreter Set
LS 6032P Interpreter Loudspeaker

Conference equipment and channel
selectors

CS 6032FV/H Channel Selector (flush mounted)
CM/DM 6010P Conference Unit (portable)
CM/DM 6020P Conference Unit (portable) with

XLR microphone connector

CM/DM 6070P Conference Unit (portable) with

two built-in channel selectors

CM/DM 6090P Conference Unit (portable) with

two built-in channel selectors and
XLR microphone connector

CM/DM 6060F Conference Unit (flush mounted)

with one built-in channel
selectors

CM/DM 6510F Conference Unit (flush mounted)

with Chip-card and 3 voting
buttons

CM/DM 6560F Conference Unit (flush mounted)

with one built-in channel
selector, Chip-card and 3 voting
buttons

MU 6040C/D Microphone Unit for use with

customised front plate with
Loudspeaker, Microphone and
Buttons. Available in Delegate
(D) and Chairman (C) version

AM 6040 Ambient Noise Microphone

Manual 01 18 04453

Danish Interpretation Systems User Manual

Operating instructions

JB 6002/04 Junction Box

General description

The JB 6002/04 Junction Boxes are part of the DCS
6000 system and enables the DCS-LAN to be split
into 2 or 4 I/O buffered ports.

The JB 6002/04 is used to split the DCS-LAN for
tap-out connection of a DCS 6000 conference unit.

Features

The main features of the JB 6002/04 are:

• Loop through of the DCS-LAN.

• 2 or 4 independent DCS-LAN tap-out ports.

• Redundancy enhancement as other tap-out ports

are unaffected by potential network damage on
one tap-out port.

• Enables single cable connection to each unit

• Designed in a small size easy-to-install cabinet.

Connectors JB 6002/04

Each connector is for connection to one Delegate
Unit or one Interpreter Unit or up to four Channel
Selectors. This limitation is because the ‘Unit’
connectors have current limiting devises for the
power line.

Maximum cable length on the ‘Unit’ connector: 10
m.

Note: The connected unit must be terminated (either
by auto termination or terminating plug (CS 6032)).

Unused ‘Unit’ connectors of JB 6002/4 do not need
termination.

LED Indications on JB 6004

In addition to the above-mentioned connectors, the
JB 6004 features the following indications

q Power LED

This LED lights up when Power is available on the
connector next to the LED.

q Outgoing data

This LED lights up, when the Junction Box receives
data from the CU 6010 Central Unit (at the ‘Loop
Through Chain’).

The JB 6002/04 features the following connectors:

q Loop through chain

RJ45 connector, 2 pieces
DCS-LAN connectors used for connection to the

CU 6000/CU 6010 and for connection to other units
with DCS-LAN connectors such as more JB
6002/04.

These connectors have auto termination.

q Unit connector

RJ45 connector, 2 pieces (JB 6002), 4 pieces (JB
6004

Manual 01 18 04453

q Incoming Data

This LED lights up, when the Junction Box
received data from the connected Unit(s) (at the
‘Unit’ connector).

System design

There are no settings to be done on the JB 6004
Junction Box.

Regarding the number of units, which can be
connected to the CU 6010, please refer to the CU
6010 User Manual.

7

Danish Interpretation Systems User Manual

8

Standard use of JB 6002/04

The following typical schematic shows the normal use of JB 6002/04 with delegate and interpreter units:

Manual 01 18 04453

Danish Interpretation Systems User Manual

Enhanced use of JB 6002/04

The following schematic shows how to use two
parallel feeding cables to both the delegate units
and the interpreter units. In case of cable failure,

there will always be units (in the same row or
booth), which will work. This considerably
enhances the redundancy of the system.

Manual 01 18 04453

9

Danish Interpretation Systems User Manual

10

Appendix

Technical appendix

Cabling
CAT5

The DCS 6000 system uses CAT5, CAT5e or
CAT6 FTP or STP cables with screened RJ45
connectors.

EIA 568-B wiring shall be used.

It is important to use only FTP or STP
(screened) cables and screened RJ45 connectors
and not UTP cable, which is unscreened.

How to wire a CAT5 (EIA 568-B) Cable:

Pin Function Connector #1 Connector #2

1 In-going + ORG/WHT ORG/WHT
2 In-going - ORG ORG
3 +48V GRN/WHT GRN/WHT
4 0V BLU BLU
5 0V BLU/WHT BLU/WHT
6 +48V GRN GRN
7 Outgoing - BRN/WHT BRN/WHT
8 Outgoing + BRN BRN

Note. If other colour codes are used then the four

pairs are connected as follows:

Pair 1: Pin 1 & 2
Pair 2: Pin 3 & 6
Pair 3: Pin 4 & 5
Pair 4: Pin 7 & 8

The phase of the pairs must be correct and
the wiring spec. as stated in CAT5 (EIA
568-B) have to be followed.

Note: CAT6 cables can normally only be
terminated in sockets (female) and not in cable
plugs.

CAT6 can thus only be used for longer cable draws
terminating in wall outlets or jack patch panels.

Accessories (not supplied)

Cat 5e Connection Cables (AWG24)

EC 6000-..5 Connection Cable 0,5 m......................10 03 12500

EC 6000-01 Connection Cable 1 m.........................10 03 13101

EC 6000-02 Connection Cable 2 m.........................10 03 13201

EC 6000-05 Connection Cable 5 m.........................10 03 13501

EC 6000-10 Connection Cable 10 m.......................10 03 14102

EC 6000-20 Connection Cable 20 m.......................10 03 14202

EC 6000-50 Connection Cable 50 m.......................10 03 14502

Technical specifications
General

Power consumption ..................................................max. 0,5W

Supply voltage for unit’s ..................................................... 48V

Temperature to guarantee specified performance

..............................5 Deg C. to 40 Deg C. (35 to 80% humidity)

Storage temperature

.......................... -20 Deg C. to 60 Deg C. (10 to 80% humidity)

Weight JB 6002...............................................................0,1 Kg

Manual 01 18 04453

Weight JB 6004................................................................0,2 Kg

Dimensions JB 6002 (W x H x D) ................80 x 24 x 102 mm

Dimensions JB 6004 (W x H x D) ................88 x 47 x 105 mm

Connectors

DCS-LAN loop through........................................2 pieces RJ45

DCS-LAN chain (JB 6002)...................................2 pieces RJ45

DCS-LAN chain (JB 6004)...................................4 pieces RJ45

Specifications are subject to change without notice.